Make it so for each server, instead of specifying a hostname, one can use
a SRV label.
When doing so, haproxy will first resolve the SRV label, then use the
resulting hostnames, as well as port and weight (priority is ignored right
now), to each server using the SRV label.
It is resolved periodically, and any server disappearing from the SRV records
will be removed, and any server appearing will be added, assuming there're
free servers in haproxy.
This patch is a major upgrade of the internal run-time DNS resolver in
HAProxy and it brings the following 2 main changes:
1. DNS resolution task
Up to now, DNS resolution was triggered by the health check task.
From now, DNS resolution task is autonomous. It is started by HAProxy
right after the scheduler is available and it is woken either when a
network IO occurs for one of its nameserver or when a timeout is
matched.
From now, this means we can enable DNS resolution for a server without
enabling health checking.
2. Introduction of a dns_requester structure
Up to now, DNS resolution was purposely made for resolving server
hostnames.
The idea, is to ensure that any HAProxy internal object should be able
to trigger a DNS resolution. For this purpose, 2 things has to be done:
- clean up the DNS code from the server structure (this was already
quite clean actually) and clean up the server's callbacks from
manipulating too much DNS resolution
- create an agnostic structure which allows linking a DNS resolution
and a requester of any type (using obj_type enum)
3. Manage requesters through queues
Up to now, there was an uniq relationship between a resolution and it's
owner (aka the requester now). It's a shame, because in some cases,
multiple objects may share the same hostname and may benefit from a
resolution being performed by a third party.
This patch introduces the notion of queues, which are basically lists of
either currently running resolution or waiting ones.
The resolutions are now available as a pool, which belongs to the resolvers.
The pool has has a default size of 64 resolutions per resolvers and is
allocated at configuration parsing.
This patch introduces a some re-organisation around the DNS code in
HAProxy.
1. make the dns_* functions less dependent on 'struct server' and 'struct resolution'.
With this in mind, the following changes were performed:
- 'struct dns_options' has been removed from 'struct resolution' (well,
we might need it back at some point later, we'll see)
==> we'll use the 'struct dns_options' from the owner of the resolution
- dns_get_ip_from_response(): takes a 'struct dns_options' instead of
'struct resolution'
==> so the caller can pass its own dns options to get the most
appropriate IP from the response
- dns_process_resolve(): struct dns_option is deduced from new
resolution->requester_type parameter
2. add hostname_dn and hostname_dn_len into struct server
In order to avoid recomputing a server's hostname into its domain name
format (and use a trash buffer to store the result), it is safer to
compute it once at configuration parsing and to store it into the struct
server.
In the mean time, the struct resolution linked to the server doesn't
need anymore to store the hostname in domain name format. A simple
pointer to the server one will make the trick.
The function srv_alloc_dns_resolution() properly manages everything for
us: memory allocation, pointer updates, etc...
3. move resolvers pointer into struct server
This patch makes the pointer to struct dns_resolvers from struct
dns_resolution obsolete.
Purpose is to make the resolution as "neutral" as possible and since the
requester is already linked to the resolvers, then we don't need this
information anymore in the resolution itself.
Plan is to add min-tlsxx max-tlsxx configuration, more consistent than no-tlsxx.
This patch introduce internal min/max and replace force-tlsxx implementation.
SSL method configuration is store in 'struct tls_version_filter'.
SSL method configuration to openssl setting is abstract in 'methodVersions' table.
With openssl < 1.1.0, SSL_CTX_set_ssl_version is used for force (min == max).
With openssl >= 1.1.0, SSL_CTX_set_min/max_proto_version is used.
This patch adds a new stats socket command to modify server
FQDNs at run time.
Its syntax:
set server <backend>/<server> fqdn <FQDN>
This patch also adds FQDNs to server state file at the end
of each line for backward compatibility ("-" if not present).
This patch makes backend sections support 'server-template' new keyword.
Such 'server-template' objects are parsed similarly to a 'server' object
by parse_server() function, but its first arguments are as follows:
server-template <ID prefix> <nb | range> <ip | fqdn>:<port> ...
The remaining arguments are the same as for 'server' lines.
With such server template declarations, servers may be allocated with IDs
built from <ID prefix> and <nb | range> arguments.
For instance declaring:
server-template foo 1-5 google.com:80 ...
or
server-template foo 5 google.com:80 ...
would be equivalent to declare:
server foo1 google.com:80 ...
server foo2 google.com:80 ...
server foo3 google.com:80 ...
server foo4 google.com:80 ...
server foo5 google.com:80 ...
This patch adds 'no-agent-check' setting supported both by 'default-server'
and 'server' directives to disable an agent check for a specific server which would
have 'agent-check' set as default value (inherited from 'default-server'
'agent-check' setting), or, on 'default-server' lines, to disable 'agent-check' setting
as default value for any further 'server' declarations.
For instance, provided this configuration:
default-server agent-check
server srv1
server srv2 no-agent-check
server srv3
default-server no-agent-check
server srv4
srv1 and srv3 would have an agent check enabled contrary to srv2 and srv4.
We do not allocate anymore anything when parsing 'default-server' 'agent-check'
setting.
This patch makes 'default-server' directives support 'sni' settings.
A field 'sni_expr' has been added to 'struct server' to temporary
stores SNI expressions as strings during both 'default-server' and 'server'
lines parsing. So, to duplicate SNI expressions from 'default-server' 'sni' setting
for new 'server' instances we only have to "strdup" these strings as this is
often done for most of the 'server' settings.
Then, sample expressions are computed calling sample_parse_expr() (only for 'server'
instances).
A new function has been added to produce the same error output as before in case
of any error during 'sni' settings parsing (display_parser_err()).
Should not break anything.
Before this patch 'check' setting was only supported by 'server' directives.
This patch makes also 'default-server' directives support this setting.
A new 'no-check' keyword parser has been implemented to disable this setting both
in 'default-server' and 'server' directives.
Should not break anything.
This adds a new "dynamic" keyword for the cookie option. If set, a cookie
will be generated for each server (assuming one isn't already provided on
the "server" line), from the IP of the server, the TCP port, and a secret
key provided. To provide the secret key, a new keyword as been added,
"dynamic-cookie-key", for backends.
Example :
backend bk_web
balance roundrobin
dynamic-cookie-key "bla"
cookie WEBSRV insert dynamic
server s1 127.0.0.1:80 check
server s2 192.168.56.1:80 check
This is a first step to be able to dynamically add and remove servers,
without modifying the configuration file, and still have all the load
balancers redirect the traffic to the right server.
Provide a way to generate session cookies, based on the IP address of the
server, the TCP port, and a secret key provided.
Right now not only we're limited to 8 bits, but it's mentionned nowhere
and the limit was already reached. In addition, pp_opts (proxy protocol
options) were set to 32 bits while only 3 are needed. So let's swap
these two and group them together to avoid leaving two holes in the
structure, saving 64 bits on 64-bit machines.
Keeping the address and the port in the same field causes a lot of problems,
specifically on the DNS part where we're forced to cheat on the family to be
able to keep the port. This causes some issues such as some families not being
resolvable anymore.
This patch first moves the service port to a new field "svc_port" so that the
port field is never used anymore in the "addr" field (struct sockaddr_storage).
All call places were adapted (there aren't that many).
Having it in the ifdef complicates certain operations which require
additional ifdefs just to access a member which could remain zero in
non-ssl cases. Let's move it out, it will not even increase the
struct size on 64-bit machines due to alignment.
We used to have 3 types of counters with a huge overlap :
- listener counters : stats collected for each bind line
- proxy counters : union of the frontend and backend counters
- server counters : stats collected per server
It happens that quite a good part was common between listeners and
proxies due to the frontend counters being updated at the two locations,
and that similarly the server and proxy counters were overlapping and
being updated together.
This patch cleans this up to propose only two types of counters :
- fe_counters: used by frontends and listeners, related to
incoming connections activity
- be_counters: used by backends and servers, related to outgoing
connections activity
This allowed to remove some non-sensical counters from both parts. For
frontends, the following entries were removed :
cum_lbconn, last_sess, nbpend_max, failed_conns, failed_resp,
retries, redispatches, q_time, c_time, d_time, t_time
For backends, this ones was removed : intercepted_req.
While doing this it was discovered that we used to incorrectly report
intercepted_req for backends in the HTML stats, which was always zero
since it's never updated.
Also it revealed a few inconsistencies (which were not fixed as they
are harmless). For example, backends count connections (cum_conn)
instead of sessions while servers count sessions and not connections.
Over the long term, some extra cleanups may be performed by having
some counters update functions touching both the server and backend
at the same time, as well as both the frontend and listener, to
ensure that all sides have all their stats properly filled. The stats
dump will also be able to factor the dump functions by counter types.
This will allow a server to automatically fall back to an explicit numeric
IP address when all other methods fail. The address is simply specified in
the address list.
This new setting supports a comma-delimited list of methods used to
resolve the server's FQDN to an IP address. Currently supported methods
are "libc" (use the regular libc's resolver) and "last" (use the last
known valid address found in the state file).
The list is implemented in a 32-bit integer, because each init-addr
method only requires 3 bits. The last one must always be SRV_IADDR_END
(0), allowing to store up to 10 methods in a single 32 bit integer.
Note: the doc is provided at the end of this series.
This flag has to be set when an IP address resolution fails (either
using libc at start up or using HAProxy's runtime resolver). This will
automatically trigger the administrative status "MAINT", through the
global mask SRV_ADMF_MAINT.
Server addresses are not resolved anymore upon the first pass so that we
don't fail if an address cannot be resolved by the libc. Instead they are
processed all at once after the configuration is fully loaded, by the new
function srv_init_addr(). This function only acts on the server's address
if this address uses an FQDN, which appears in server->hostname.
For now the function does two things, to followup with HAProxy's historical
default behavior:
1. apply server IP address found in server-state file if runtime DNS
resolution is enabled for this server
2. use the DNS resolver provided by the libc
If none of the 2 options above can find an IP address, then an error is
returned.
All of this will be needed to support the new server parameter "init-addr".
For now, the biggest user-visible change is that all server resolution errors
are dumped at once instead of causing a startup failure one by one.
For active servers, this is the sum of the eweights of all active
servers before this one in the backend, and
[srv->cumulative_weight .. srv_cumulative_weight + srv_eweight) is a
space occupied by this server in the range [0 .. lbprm.tot_wact), and
likewise for backup servers with tot_wbck. This allows choosing a
server or a range of servers proportional to their weight, by simple
integer comparison.
Signed-off-by: Andrew Rodland <andrewr@vimeo.com>
Introduction of 3 new server flags to remember if some parameters were set
during configuration parsing.
* SRV_F_CHECKADDR: this server has a check addr configured
* SRV_F_CHECKPORT: this server has a check port configured
* SRV_F_AGENTADDR: this server has a agent addr configured
This options prioritize th choice of an ip address matching a network. This is
useful with clouds to prefer a local ip. In some cases, a cloud high
avalailibility service can be announced with many ip addresses on many
differents datacenters. The latency between datacenter is not negligible, so
this patch permitsto prefers a local datacenter. If none address matchs the
configured network, another address is selected.
DNS selection preferences are actually declared inline in the
struct server. There are copied from the server struct to the
dns_resolution struct for each resolution.
Next patchs adds new preferences options, and it is not a good
way to copy all the configuration information before each dns
resolution.
This patch extract the configuration preference from the struct
server and declares a new dedicated struct. Only a pointer to this
new striuict will be copied before each dns resolution.
This is equivalent to commit 2af207a ("MEDIUM: tcp: implement tcp-ut
bind option to set TCP_USER_TIMEOUT") except that this time it works
on the server side. The purpose is to detect dead server connections
even when checks are rare, disabled, or after a soft reload (since
checks are disabled there as well), and to ensure client connections
will get killed faster.
Introduces a few new macros used by server state save and application accros reloads:
- currently used state server file format version
- currently used state server file header fields
- MIN and MAX value for version number
- maximum number of fields that could be found in a server-state file
- an arbitrary state-file max line length
When a server is disabled in the configuration using the "disabled"
keyword, a single flag is positionned: SRV_ADMF_CMAINT (use to be
SRV_ADMF_FMAINT)..
That said, when providing the first version of this code, we also
changed the SRV_ADMF_MAINT mask to match any of the possible MAINT
cases: SRV_ADMF_FMAINT, SRV_ADMF_IMAINT, SRV_ADMF_CMAINT
Since SRV_ADMF_CMAINT is never (and is not supposed to be) altered at
run time, once a server has this flag set up, it can never ever be
enabled again using the stats socket.
In order to fix this, we should:
- consider SRV_ADMF_CMAINT as a simple flag to report the state in the
old configuration file (will be used after a reload to deduce the
state of the server in a new running process)
- enabling both SRV_ADMF_CMAINT and SRV_ADMF_FMAINT when the keyword
"disabled" is in use in the configuration
- update the mask SRV_ADMF_MAINT as it was before, to only match
SRV_ADMF_FMAINT and SRV_ADMF_IMAINT.
The following patch perform the changes above.
It allows fixing the regression without breaking the way the up coming
feature (seamless server state accross reloads) is going to work.
Note: this is 1.6-only, no backport needed.
These ones are considered safe as they have already been reused.
They will be useful in "aggressive" and "always" http-reuse modes
in order to place the first request of a connection with the least
risk.
For now it's not populated but we have the list entry. It will carry
all idle connections that sessions don't want to share. They may be
used later to reclaim connections upon socket shortage for example.
This flag aims at reporting whether the server unique id (srv->puid) has
been forced by the administrator in HAProxy's configuration.
If not set, it means HAProxy has generated automatically the server's
unique id.
The new "sni" server directive takes a sample fetch expression and
uses its return value as a hostname sent as the TLS SNI extension.
A typical use case consists in forwarding the front connection's SNI
value to the server in a bridged HTTPS forwarder :
sni ssl_fc_sni
When the destination IP is dynamically set, we can't use the "target"
to define the proto. This patch ensures that we always use the protocol
associated with the address family. The proto field was removed from
the server and check structs.
This option disables SSL session reuse when SSL is used to communicate with
the server. It will force the server to perform a full handshake for every
new connection. It's probably only useful for benchmarking, troubleshooting,
and for paranoid users.
The motivation for this is to make checks more independent of each
other to allow further reuse of their infrastructure.
For nowserver->check and server->agent still always use the same values
for the addr and proto fields so this patch should not introduce any
behavioural changes.
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Lasse Birnbaum Jensen reported an issue when agent checks are used at the same
time as standard healthchecks when SSL is enabled on the server side.
The symptom is that agent checks try to communicate in SSL while it should
manage raw data. This happens because the transport layer is shared between all
kind of checks.
To fix the issue, the transport layer is now stored in each check type,
allowing to use SSL healthchecks when required, while an agent check should
always use the raw_sock implementation.
The fix must be backported to 1.5.
This patch adds support for a new "drain" mode. So now we have 3 admin
modes for a server :
- READY
- DRAIN
- MAINT
The drain mode disables load balancing but leaves the server up. It can
coexist with maint, except that maint has precedence. It is also inherited
from tracked servers, so just like maint, it's represented with 2 bits.
New functions were designed to set/clear each flag and to propagate the
changes to tracking servers when relevant, and to log the changes. Existing
functions srv_set_adm_maint() and srv_set_adm_ready() were replaced to make
use of the new functions.
Currently the drain mode is not yet used, however the whole logic was tested
with all combinations of set/clear of both flags in various orders to catch
all corner cases.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
This flag is only a copy of (srv->uweight == 0), so better get rid of
it to reduce some of the confusion that remains in the code, and use
a simple function to return this state based on this weight instead.
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
After the move of checks from servers to autonomous checks, we need a
massive cleanup and reordering as it's becoming increasingly difficult
to find the definitions of types and enums.
Nothing was changed, blocks were just moved.
Server tracking uses the same "tracknext" list for servers tracking
another one and for the servers being tracked. This caused an issue
which was fixed by commit f39c71c ([CRITICAL] fix server state tracking:
it was O(n!) instead of O(n)), consisting in ensuring that a server is
being checked before walking down the list, so that we don't propagate
the up/down information via servers being part of the track chain.
But the root cause is the fact that all servers share the same list.
The correct solution consists in having a list head for the tracked
servers and a list of next tracking servers. This simplifies the
propagation logic, especially for the case where status changes might
be passed to individual servers via the CLI.
Baptiste Assmann reported some confusing printf() output of the server
port since it's declared signed. Better turn it to unsigned.
There's no need to backport this, it's only used in 16-bit places.
