Add a new pipe, one per thread, so that we can write on it to wake a thread
sleeping in a poller, and use it to wake threads supposed to take care of a
task, if they are all sleeping.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
A number of counters have been added at special places helping better
understanding certain bug reports. These counters are maintained per
thread and are shown using "show activity" on the CLI. The "clear
counters" commands also reset these counters. The output is sent as a
single write(), which currently produces up to about 7 kB of data for
64 threads. If more counters are added, it may be necessary to write
into multiple buffers, or to reset the counters.
To backport to 1.8 to help collect more detailed bug reports.
This one allows not to inflate some structures when threads are
disabled. Now struct global is 1.4 kB instead of 33 kB.
Should be backported to 1.8 for ease of backporting of upcoming
patches.
The "thread" part is 32kB long, better move it at the end of the
structure since it's only used during initialization, to keep the
rest grouped together.
Should be backported to 1.8 to ease backporting of upcoming patches,
no functional impact.
The number of async fd is computed considering the maxconn, the number
of sides using ssl and the number of engines using async mode.
This patch should be backported on haproxy 1.8
This patch changes the behavior of the master during the exit of a
worker.
When a worker exits with an error code, for example in the case of a
segfault, all workers are now killed and the master leaves.
If you don't want this behavior you can use the option
"master-worker no-exit-on-failure".
Now, it is possible to bind CPU at the thread level instead of the process level
by defining a thread set in "cpu-map" directives. Thus, its format is now:
cpu-map [auto:]<process-set>[/<thread-set>] <cpu-set>...
where <process-set> and <thread-set> must follow the format:
all | odd | even | number[-[number]]
Having a process range and a thread range in same time with the "auto:" prefix
is not supported. Only one range is supported, the other one must be a fixed
number. But it is allowed when there is no "auto:" prefix.
Because it is possible to define a mapping for a process and another for a
thread on this process, threads will be bound on the intersection of their
mapping and the one of the process on which they are attached. If the
intersection is null, no specific binding will be set for the threads.
This patch adds support for `Type=notify` to the systemd unit.
Supporting `Type=notify` improves both starting as well as reloading
of the unit, because systemd will be let known when the action completed.
See this quote from `systemd.service(5)`:
> Note however that reloading a daemon by sending a signal (as with the
> example line above) is usually not a good choice, because this is an
> asynchronous operation and hence not suitable to order reloads of
> multiple services against each other. It is strongly recommended to
> set ExecReload= to a command that not only triggers a configuration
> reload of the daemon, but also synchronously waits for it to complete.
By making systemd aware of a reload in progress it is able to wait until
the reload actually succeeded.
This patch introduces both a new `USE_SYSTEMD` build option which controls
including the sd-daemon library as well as a `-Ws` runtime option which
runs haproxy in master-worker mode with systemd support.
When haproxy is running in master-worker mode with systemd support it will
send status messages to systemd using `sd_notify(3)` in the following cases:
- The master process forked off the worker processes (READY=1)
- The master process entered the `mworker_reload()` function (RELOADING=1)
- The master process received the SIGUSR1 or SIGTERM signal (STOPPING=1)
Change the unit file to specify `Type=notify` and replace master-worker
mode (`-W`) with master-worker mode with systemd support (`-Ws`).
Future evolutions of this feature could include making use of the `STATUS`
feature of `sd_notify()` to send information about the number of active
connections to systemd. This would require bidirectional communication
between the master and the workers and thus is left for future work.
This macro should be used to declare variables or struct members depending on
the USE_THREAD compile option. It avoids the encapsulation of such declarations
between #ifdef/#endif. It is used to declare all lock variables.
At a number of places, bitmasks are used for process affinity and to map
listeners to processes. Every time 1UL<<(relative_pid-1) is used. Let's
create a "pid_bit" variable corresponding to this value to clean this up.
By default, no affinity is set for threads. To bind threads on CPU, you must
define a "thread-map" in the global section. The format is the same than the
"cpu-map" parameter, with a small difference. The process number must be
defined, with the same format than cpu-map ("all", "even", "odd" or a number
between 1 and 31/63).
A thread will be bound on the intersection of its mapping and the one of the
process on which it is attached. If the intersection is null, no specific bind
will be set for the thread.
hap_register_per_thread_init and hap_register_per_thread_deinit functions has
been added to register functions to do, for each thread, respectively, some
initialization and deinitialization. These functions are added in the global
lists per_thread_init_list and per_thread_deinit_list.
These functions are called only when HAProxy is started with more than 1 thread
(global.nbthread > 1).
This is a huge patch with many changes, all about the DNS. Initially, the idea
was to update the DNS part to ease the threads support integration. But quickly,
I started to refactor some parts. And after several iterations, it was
impossible for me to commit the different parts atomically. So, instead of
adding tens of patches, often reworking the same parts, it was easier to merge
all my changes in a uniq patch. Here are all changes made on the DNS.
First, the DNS initialization has been refactored. The DNS configuration parsing
remains untouched, in cfgparse.c. But all checks have been moved in a post-check
callback. In the function dns_finalize_config, for each resolvers, the
nameservers configuration is tested and the task used to manage DNS resolutions
is created. The links between the backend's servers and the resolvers are also
created at this step. Here no connection are kept alive. So there is no needs
anymore to reopen them after HAProxy fork. Connections used to send DNS queries
will be opened on demand.
Then, the way DNS requesters are linked to a DNS resolution has been
reworked. The resolution used by a requester is now referenced into the
dns_requester structure and the resolution pointers in server and dns_srvrq
structures have been removed. wait and curr list of requesters, for a DNS
resolution, have been replaced by a uniq list. And Finally, the way a requester
is removed from a DNS resolution has been simplified. Now everything is done in
dns_unlink_resolution.
srv_set_fqdn function has been simplified. Now, there is only 1 way to set the
server's FQDN, independently it is done by the CLI or when a SRV record is
resolved.
The static DNS resolutions pool has been replaced by a dynamoc pool. The part
has been modified by Baptiste Assmann.
The way the DNS resolutions are triggered by the task or by a health-check has
been totally refactored. Now, all timeouts are respected. Especially
hold.valid. The default frequency to wake up a resolvers is now configurable
using "timeout resolve" parameter.
Now, as documented, as long as invalid repsonses are received, we really wait
all name servers responses before retrying.
As far as possible, resources allocated during DNS configuration parsing are
releases when HAProxy is shutdown.
Beside all these changes, the code has been cleaned to ease code review and the
doc has been updated.
Some places call delete_listener() then decrement the number of
listeners and jobs. At least one other place calls delete_listener()
without doing so, but since it's in deinit(), it's harmless and cannot
risk to cause zombie processes to survive. Given that the number of
listeners and jobs is incremented when creating the listeners, it's
much more logical to symmetrically decrement them when deleting such
listeners.
swap_buffer is a global variable only used by buffer_slow_realign. So it has
been moved from global.h to buffer.c and it is allocated by init_buffer
function. deinit_buffer function has been added to release it. It is also used
to destroy the buffers' pool.
The default len of request uri in log messages is 1024. In some use
cases, you need to keep the long trail of GET parameters. The only
way to increase this len is to recompile with DEFINE=-DREQURI_LEN=2048.
This commit introduces a tune.http.logurilen configuration directive,
allowing to tune this at runtime.
This option exits every workers when one of the current workers die.
It allows you to monitor the master process in order to relaunch
everything on a failure.
For example it can be used with systemd and Restart=on-failure in a spec
file.
This commit remove the -Ds systemd mode in HAProxy in order to replace
it by a more generic master worker system. It aims to replace entirely
the systemd wrapper in the near future.
The master worker mode implements a new way of managing HAProxy
processes. The master is in charge of parsing the configuration
file and is responsible for spawning child processes.
The master worker mode can be invoked by using the -W flag. It can be
used either in background mode (-D) or foreground mode. When used in
background mode, the master will fork to daemonize.
In master worker background mode, chroot, setuid and setgid are done in
each child rather than in the master process, because the master process
will still need access to filesystem to reload the configuration.
This patch changes the stats socket rights for allowing the sending of
listening sockets.
The previous behavior was to allow any unix stats socket with admin
level to send sockets. It's not possible anymore, you have to set this
option to activate the socket sending.
Example:
stats socket /var/run/haproxy4.sock mode 666 expose-fd listeners level user process 4
The current level variable use only 2 bits for storing the 3 access
level (user, oper and admin).
This patch add a bitmask which allows to use the remaining bits for
other usage.
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
Historically a lot of SSL global settings were stored into the global
struct, but we've reached a point where there are 3 ifdefs in it just
for this, and others in haproxy.c to initialize it.
This patch moves all the private fields to a new struct "global_ssl"
stored in ssl_sock.c. This includes :
char *crt_base;
char *ca_base;
char *listen_default_ciphers;
char *connect_default_ciphers;
int listen_default_ssloptions;
int connect_default_ssloptions;
int tune.sslprivatecache; /* Force to use a private session cache even if nbproc > 1 */
unsigned int tune.ssllifetime; /* SSL session lifetime in seconds */
unsigned int tune.ssl_max_record; /* SSL max record size */
unsigned int tune.ssl_default_dh_param; /* SSL maximum DH parameter size */
int tune.ssl_ctx_cache; /* max number of entries in the ssl_ctx cache. */
The "tune" part was removed (useless here) and the occasional "ssl"
prefixes were removed as well. Thus for example instead of
global.tune.ssl_default_dh_param
we now have :
global_ssl.default_dh_param
A few initializers were present in the constructor, they could be brought
back to the structure declaration.
A few other entries had to stay in global for now. They concern memory
calculationn (used in haproxy.c) and stats (used in stats.c).
The code is already much cleaner now, especially for global.h and haproxy.c
which become readable.
This finishes to clean up the zlib-specific parts. It also unbreaks recent
commit b97c6fb ("CLEANUP: compression: use the build options list to report
the algos") which broke USE_ZLIB due to MAXWBITS not being defined anymore
in haproxy.c.
We replaced global.deviceatlas with global_deviceatlas since there's no need
to store all this into the global section. This removes the last #ifdefs,
and now the code is 100% self-contained in da.c. The file da.h was now
removed because it was only used to load dac.h, which is more easily
loaded directly from da.c. It provides another good example of how to
integrate code in the future without touching the core parts.
We replaced global._51degrees with global_51degrees since there's no need
to store all this into the global section. This removes the last #ifdefs,
and now the code is 100% self-contained in 51d.c. The file 51d.h was now
removed because it was only used to load 51Degrees.h, which is more easily
loaded from 51d.c. It provides a good example of how to integrate code in
the future without touching the core parts.
We replaced global.wurfl with global_wurfl since there's no need to store
all this into the global section. This removes the last #ifdefs, and now
the code is 100% self-contained in wurfl.c. It provides a good example of
how to integrate code in the future without touching the core parts.
The 3 device detection engines stop at the same place in deinit()
with the usual #ifdefs. Similar to the other functions we can have
some late deinitialization functions. These functions do not return
anything however so we have to use a different type.
There's a significant amount of late initialization calls which are
performed after the point where we exit in check mode. These calls
are used to allocate resource and perform certain slow operations.
Let's have a way to register some functions which need to be called
there instead of having this multitude of #ifdef in the init path.
Many extensions now report some build options to ease debugging, but
this is now being done at the expense of code maintainability. Let's
provide a registration function to do this so that we can start to
remove most of the #ifdefs from haproxy.c (18 currently just for a
single function).
Now it is possible to use variables attached to a process. The scope name is
'proc'. These variables are released only when HAProxy is stopped.
'tune.vars.proc-max-size' directive has been added to confiure the maximum
amount of memory used by "proc" variables. And because memory accounting is
hierachical for variables, memory for "proc" vars includes memory for "sess"
vars.
It is very common when validating a configuration out of production not to
have access to the same resolvers and to fail on server address resolution,
making it difficult to test a configuration. This option simply appends the
"none" method to the list of address resolution methods for all servers,
ensuring that even if the libc fails to resolve an address, the startup
sequence is not interrupted.
The only reason wurfl/wurfl.h was needed outside of wurfl.c was to expose
wurfl_handle which is a pointer to a structure, referenced by global.h.
By just storing a void* there instead, we can confine all wurfl code to
wurfl.c, which is really nice.
WURFL is a high-performance and low-memory footprint mobile device
detection software component that can quickly and accurately detect
over 500 capabilities of visiting devices. It can differentiate between
portable mobile devices, desktop devices, SmartTVs and any other types
of devices on which a web browser can be installed.
In order to add WURFL device detection support, you would need to
download Scientiamobile InFuze C API and install it on your system.
Refer to www.scientiamobile.com to obtain a valid InFuze license.
Any useful information on how to configure HAProxy working with WURFL
may be found in:
doc/WURFL-device-detection.txt
doc/configuration.txt
examples/wurfl-example.cfg
Please find more information about WURFL device detection API detection
at https://docs.scientiamobile.com/documentation/infuze/infuze-c-api-user-guide
With Linux officially introducing SO_REUSEPORT support in 3.9 and
its mainstream adoption we have seen more people running into strange
SO_REUSEPORT related issues (a process management issue turning into
hard to diagnose problems because the kernel load-balances between the
new and an obsolete haproxy instance).
Also some people simply want the guarantee that the bind fails when
the old process is still bound.
This change makes SO_REUSEPORT configurable, introducing the command
line argument "-dR" and the noreuseport configuration directive.
A backport to 1.6 should be considered.
Trie now uses a dataset structure just like Pattern, so this has been
defined in includes/types/global.h for both Pattern and Trie where it
was just Pattern.
In src/51d.c all functions used by the Trie implementation which need a
dataset as an argument now use the global dataset. The
fiftyoneDegreesDestroy method has now been replaced with
fiftyoneDegreesDataSetFree which is common to Pattern and Trie. In
addition, two extra dataset init status' have been added to the switch
statement in init_51degrees.
When memmax is forced using "-m", the per-process memory limit is enforced
using setrlimit(), but this value is not used to compute the automatic
maxconn limit. In addition, the per-process memory limit didn't consider
the fact that the shared SSL cache only needs to be accounted once.
The doc was also fixed to clearly state that "-m" is global and not per
process. It makes sense because people who use -m want to protect the
system's resources regardless of whatever appears in the configuration.
Michael Ezzell reported a bug causing haproxy to segfault during startup
when trying to send syslog message from Lua. The function __send_log() can
be called with *p that is NULL and/or when the configuration is not fully
parsed, as is the case with Lua.
This patch fixes this problem by using individual vectors instead of the
pre-generated strings log_htp and log_htp_rfc5424.
Also, this patch fixes a problem causing haproxy to write the wrong pid in
the logs -- the log_htp(_rfc5424) strings were generated at the haproxy
start, but "pid" value would be changed after haproxy is started in
daemon/systemd mode.
Added support for version 3.2 of 51Degrees C library.
Added fields to store HTTP header names important to device detection
other than User-Agent.
Included a pool of worksets for use with Pattern device detection.
This new global section directive is used to store the path to the file
where HAProxy will be able to retrieve server states across reloads.
The file pointed by this path is used to store a file which can contains
state of all servers from all backends.
This new global directive can be used to provide a base directory where
all the server state files could be loaded.
If a server state file name starts with a slash '/', then this directive
must not be applied.
This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
This cache is used by 51d converter. The input User-Agent string, the
converter args and a random seed are used as a hashing key. The cached
entries contains a pointer to the resulting string for specific
User-Agent string detection.
The cache size can be tuned using 51degrees-cache-size parameter.
Moved 51Degrees code from src/haproxy.c, src/sample.c and src/cfgparse.c
into a separate files src/51d.c and include/import/51d.h.
Added two new functions init_51degrees() and deinit_51degrees(), updated
Makefile and other code reorganizations related to 51Degrees.
