In several places in the source, there was the same block of code that was
used to deinitialize the log buffer. There were even two functions that
did this, but they were called only from the code that is in the same
source file (free_tcpcheck_fmt() in src/tcpcheck.c and free_logformat_list()
in src/proxy.c - they were both static functions).
The function free_logformat_list() was moved from the file src/proxy.c to
src/log.c, and a check of the list before freeing the memory was added to
that function.
It is now possible to retrieve the session terminate state, using
"txn.sess_term_state". The sample fetch returns the 2-character session
termation state.
Of course, the result of this sample fetch is volatile. It is subject to
change. It is also most of time useless because no termation state is set
except at the end. It should only be useful in http-after-response rule
sets. It may also be used to customize the logs using a log-format
directive.
This patch should fix the issue #2221.
In previous log backend implementation, we created a pseudo log target
for each declared log server, and we made the log target's address point
to the actual server address to save some time and prevent unecessary
copies.
But this was done without knowing that when FQDN is involved (more broadly
when dns/resolution is involved), the "port" part of server addr should
not be relied upon, and we should explicitly use ->svc_port for that
purpose.
With that in mind and thanks to the previous commit, some changes were
required: we allocate a dedicated addr within the log target when target
is in DGRAM mode. The addr is first initialized with known values and it
is then updated automatically by _srv_set_inetaddr() during runtime.
(the change is atomic so readers don't need to worry about it)
addr from server "log target" (INET/DGRAM mode) is made of the combination
of server's address (lacking the port part) and server's svc_port.
Introduce log_header struct to easily pass log header data between
functions and use that to simplify the logic around log header
handling.
While at it, some outdated comments were updated as well.
No change in behavior should be expected.
When 'log' directive was implemented, the internal representation was
named 'struct logsrv', because the 'log' directive would directly point
to the log target, which used to be a (UDP) log server exclusively at
that time, hence the name.
But things have become more complex, since today 'log' directive can point
to ring targets (implicit, or named) for example.
Indeed, a 'log' directive does no longer reference the "final" server to
which the log will be sent, but instead it describes which log API and
parameters to use for transporting the log messages to the proper log
destination.
So now the term 'logsrv' is rather confusing and prevents us from
introducing a new level of abstraction because they would be mixed
with logsrv.
So in order to better designate this 'log' directive, and make it more
generic, we chose the word 'logger' which now replaces logsrv everywhere
it was used in the code (including related comments).
This is internal rewording, so no functional change should be expected
on user-side.
The test of the log range is not very clear, in part due to the
reuse of the "curr_idx" name that happens at two levels. The call
to in_smp_log_range() applies to the smp_info's index to which 1 is
added: it verifies that the next index is still within the current
range.
Let's just have a local variable "next_index" in process_send_log()
that gets assigned the next index (current+1) and compare it to the
current range's boundaries. This makes the test much clearer. We can
then simply remove in_smp_log_range() that's no longer needed.
We previously had postparsing logic but only for logsrv sinks, but now we
need to make this operation on logsrv directly instead of sinks to prepare
for additional postparsing logic that is not sink-specific.
To do this, we migrated post_sink_resolve() and sink_postresolve_logsrvs()
to their postresolve_logsrvs() and postresolve_logsrv_list() equivalents.
Then, we split postresolve_logsrv_list() so that the sink-only logic stays
in sink.c (sink_resolve_logsrv_buffer() function), and the "generic"
target part stays in log.c as resolve_logsrv().
Error messages formatting was preserved as far as possible but some slight
variations are to be expected.
As for the functional aspect, no change should be expected.
Log servers are a real mess because:
- entries are duplicated using memcpy() without their strings being
reallocated, which results in these ones not being freeable every
time.
- a new field, ring_name, was added in 2.2 by commit 99c453df9
("MEDIUM: ring: new section ring to declare custom ring buffers.")
but it's never initialized during copies, causing the same issue
- no attempt is made at freeing all that.
Of course, running "haproxy -c" under ASAN quickly notices that and
dumps a core.
This patch adds the missing strdup() and initialization where required,
adds a new free_logsrv() function to cleanly free() such a structure,
calls it from the proxy when iterating over logsrvs instead of silently
leaking their file names and ring names, and adds the same logsrv loop
to the proxy_free_defaults() function so that we don't leak defaults
sections on exit.
It looks a bit entangled, but it comes as a whole because all this stuff
is inter-dependent and was missing.
It's probably preferable not to backport this in the foreseable future
as it may reveal other jokes if some obscure parts continue to memcpy()
the logsrv struct.
"f(void)" is the correct and preferred form for a function taking no
argument, while some places use the older "f()". These were reported
by clang's -Wmissing-prototypes, for example:
src/cpuset.c:111:5: warning: no previous prototype for function 'ha_cpuset_size' [-Wmissing-prototypes]
int ha_cpuset_size()
include/haproxy/cpuset.h:42:5: note: this declaration is not a prototype; add 'void' to make it a prototype for a zero-parameter function
int ha_cpuset_size();
^
void
This aggregate patch fixes this for the following functions:
ha_backtrace_to_stderr(), ha_cpuset_size(), ha_panic(), ha_random64(),
ha_thread_dump_all_to_trash(), get_exec_path(), check_config_validity(),
mworker_child_nb(), mworker_cli_proxy_(create|stop)(),
mworker_cleantasks(), mworker_cleanlisteners(), mworker_ext_launch_all(),
mworker_reload(), mworker_(env|proc_list)_to_(proc_list|env)(),
mworker_(un|)block_signals(), proxy_adjust_all_maxconn(),
proxy_destroy_all_defaults(), get_tainted(),
pool_total_(allocated|used)(), thread_isolate(_full|)(),
thread(_sync|)_release(), thread_harmless_till_end(),
thread_cpu_mask_forced(), dequeue_all_listeners(), next_timer_expiry(),
wake_expired_tasks(), process_runnable_tasks(), init_acl(),
init_buffer(), (de|)init_log_buffers(), (de|)init_pollers(),
fork_poller(), pool_destroy_all(), pool_evict_from_local_caches(),
pool_total_failures(), dump_pools_to_trash(), cfg_run_diagnostics(),
tv_init_(process|thread)_date(), __signal_process_queue(),
deinit_signals(), haproxy_unblock_signals()
This patch registers the parsed file and the line where a log server
is declared to make those information available in configuration
post check.
Those new informations were added on error messages probed resolving
ring names on post configuration check.
This patch adds a global counter of received syslog messages
and this one is exported on CLI "show info" as "CumRecvLogs".
This patch also updates internal conn counter and freq
of the listener and the proxy for each received log message to
prepare a further export on the "show stats".
Log forwarding:
It is possible to declare one or multiple log forwarding section,
haproxy will forward all received log messages to a log servers list.
log-forward <name>
Creates a new log forwarder proxy identified as <name>.
bind <addr> [param*]
Used to configure a log udp listener to receive messages to forward.
Only udp listeners are allowed, address must be prefixed using
'udp@', 'udp4@' or 'udp6@'. This supports for all "bind" parameters
found in 5.1 paragraph but most of them are irrelevant for udp/syslog case.
log global
log <address> [len <length>] [format <format>] [sample <ranges>:<smp_size>]
<facility> [<level> [<minlevel>]]
Used to configure target log servers. See more details on proxies
documentation.
If no format specified, haproxy tries to keep the incoming log format.
Configured facility is ignored, except if incoming message does not
present a facility but one is mandatory on the outgoing format.
If there is no timestamp available in the input format, but the field
exists in output format, haproxy will use the local date.
Example:
global
log stderr format iso local7
ring myring
description "My local buffer"
format rfc5424
maxlen 1200
size 32764
timeout connect 5s
timeout server 10s
# syslog tcp server
server mysyslogsrv 127.0.0.1:514 log-proto octet-count
log-forward sylog-loadb
bind udp4@127.0.0.1:1514
# all messages on stderr
log global
# all messages on local tcp syslog server
log ring@myring local0
# load balance messages on 4 udp syslog servers
log 127.0.0.1:10001 sample 1:4 local0
log 127.0.0.1:10002 sample 2:4 local0
log 127.0.0.1:10003 sample 3:4 local0
log 127.0.0.1:10004 sample 4:4 local0
This patch introduce a new fd handler used to parse syslog
message on udp.
The parsing function returns level, facility and metadata that
can be immediatly reused to forward message to a log server.
This handler is enabled on udp listeners if proxy is internally set
to mode PR_MODE_SYSLOG
This patch merges build message code between sink and log
and introduce a new API based on struct ist array to
prepare message header with zero copy, targeting the
log forwarding feature.
Log format 'iso' and 'timed' are now avalaible on logs line.
A new log format 'priority' is also added.
Since these are used as type attributes or conditional clauses, they
are used about everywhere and should not require a dependency on
thread.h. Moving them to compiler.h along with other similar statements
like ALIGN() etc looks more logical; this way they become part of the
base API. This allowed to remove thread-t.h from ~12 files, one was
found to only require thread-t and not thread and dict.c was found to
require thread.h.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
