haproxy/include/types/checks.h
Baptiste Assmann 95db2bcfee MAJOR: check: find out which port to use for health check at run time
HAProxy used to deduce port used for health checks when parsing configuration
at startup time.
Because of this way of working, it makes it complicated to change the port at
run time.

The current patch changes this behavior and makes HAProxy to choose the
port used for health checking when preparing the check task itself.

A new type of error is introduced and reported when no port can be found.

There won't be any impact on performance, since the process to find out the
port value is made of a few 'if' statements.

This patch also introduces a new check state CHK_ST_PORT_MISS: this flag is
used to report an error in the case when HAProxy needs to establish a TCP
connection to a server, to perform a health check but no TCP ports can be
found for it.

And last, it also introduces a new stream termination condition:
SF_ERR_CHK_PORT. Purpose of this flag is to report an error in the event when
HAProxy has to run a health check but no port can be found to perform it.
2016-09-11 08:12:13 +02:00

232 lines
9.1 KiB
C

/*
* Health-checks.
*
* Copyright 2008-2009 Krzysztof Piotr Oledzki <ole@ans.pl>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#ifndef _TYPES_CHECKS_H
#define _TYPES_CHECKS_H
#include <sys/time.h>
#include <common/config.h>
#include <common/mini-clist.h>
#include <common/regex.h>
#include <types/connection.h>
#include <types/obj_type.h>
#include <types/task.h>
#include <types/server.h>
/* enum used by check->result. Must remain in this order, as some code uses
* result >= CHK_RES_PASSED to declare success.
*/
enum chk_result {
CHK_RES_UNKNOWN = 0, /* initialized to this by default */
CHK_RES_NEUTRAL, /* valid check but no status information */
CHK_RES_FAILED, /* check failed */
CHK_RES_PASSED, /* check succeeded and server is fully up again */
CHK_RES_CONDPASS, /* check reports the server doesn't want new sessions */
};
/* flags used by check->state */
#define CHK_ST_INPROGRESS 0x0001 /* a check is currently running */
#define CHK_ST_CONFIGURED 0x0002 /* this check is configured and may be enabled */
#define CHK_ST_ENABLED 0x0004 /* this check is currently administratively enabled */
#define CHK_ST_PAUSED 0x0008 /* checks are paused because of maintenance (health only) */
#define CHK_ST_AGENT 0x0010 /* check is an agent check (otherwise it's a health check) */
#define CHK_ST_PORT_MISS 0x0020 /* check can't be send because no port is configured to run it */
/* check status */
enum {
HCHK_STATUS_UNKNOWN = 0, /* Unknown */
HCHK_STATUS_INI, /* Initializing */
HCHK_STATUS_START, /* Check started - SPECIAL STATUS */
/* Below we have finished checks */
HCHK_STATUS_CHECKED, /* DUMMY STATUS */
HCHK_STATUS_HANA, /* Health analyze detected enough consecutive errors */
HCHK_STATUS_SOCKERR, /* Socket error */
HCHK_STATUS_L4OK, /* L4 check passed, for example tcp connect */
HCHK_STATUS_L4TOUT, /* L4 timeout */
HCHK_STATUS_L4CON, /* L4 connection problem, for example: */
/* "Connection refused" (tcp rst) or "No route to host" (icmp) */
HCHK_STATUS_L6OK, /* L6 check passed */
HCHK_STATUS_L6TOUT, /* L6 (SSL) timeout */
HCHK_STATUS_L6RSP, /* L6 invalid response - protocol error */
HCHK_STATUS_L7TOUT, /* L7 (HTTP/SMTP) timeout */
HCHK_STATUS_L7RSP, /* L7 invalid response - protocol error */
/* Below we have layer 5-7 data available */
HCHK_STATUS_L57DATA, /* DUMMY STATUS */
HCHK_STATUS_L7OKD, /* L7 check passed */
HCHK_STATUS_L7OKCD, /* L7 check conditionally passed */
HCHK_STATUS_L7STS, /* L7 response error, for example HTTP 5xx */
HCHK_STATUS_PROCERR, /* External process check failure */
HCHK_STATUS_PROCTOUT, /* External process check timeout */
HCHK_STATUS_PROCOK, /* External process check passed */
HCHK_STATUS_SIZE
};
/* environment variables memory requirement for different types of data */
#define EXTCHK_SIZE_EVAL_INIT 0 /* size determined during the init phase,
* such environment variables are not updatable. */
#define EXTCHK_SIZE_ULONG 20 /* max string length for an unsigned long value */
/* external checks environment variables */
enum {
EXTCHK_PATH = 0,
/* Proxy specific environment variables */
EXTCHK_HAPROXY_PROXY_NAME, /* the backend name */
EXTCHK_HAPROXY_PROXY_ID, /* the backend id */
EXTCHK_HAPROXY_PROXY_ADDR, /* the first bind address if available (or empty) */
EXTCHK_HAPROXY_PROXY_PORT, /* the first bind port if available (or empty) */
/* Server specific environment variables */
EXTCHK_HAPROXY_SERVER_NAME, /* the server name */
EXTCHK_HAPROXY_SERVER_ID, /* the server id */
EXTCHK_HAPROXY_SERVER_ADDR, /* the server address */
EXTCHK_HAPROXY_SERVER_PORT, /* the server port if available (or empty) */
EXTCHK_HAPROXY_SERVER_MAXCONN, /* the server max connections */
EXTCHK_HAPROXY_SERVER_CURCONN, /* the current number of connections on the server */
EXTCHK_SIZE
};
/* health status for response tracking */
enum {
HANA_STATUS_UNKNOWN = 0,
HANA_STATUS_L4_OK, /* L4 successful connection */
HANA_STATUS_L4_ERR, /* L4 unsuccessful connection */
HANA_STATUS_HTTP_OK, /* Correct http response */
HANA_STATUS_HTTP_STS, /* Wrong http response, for example HTTP 5xx */
HANA_STATUS_HTTP_HDRRSP, /* Invalid http response (headers) */
HANA_STATUS_HTTP_RSP, /* Invalid http response */
HANA_STATUS_HTTP_READ_ERROR, /* Read error */
HANA_STATUS_HTTP_READ_TIMEOUT, /* Read timeout */
HANA_STATUS_HTTP_BROKEN_PIPE, /* Unexpected close from server */
HANA_STATUS_SIZE
};
enum {
HANA_ONERR_UNKNOWN = 0,
HANA_ONERR_FASTINTER, /* Force fastinter*/
HANA_ONERR_FAILCHK, /* Simulate a failed check */
HANA_ONERR_SUDDTH, /* Enters sudden death - one more failed check will mark this server down */
HANA_ONERR_MARKDWN, /* Mark this server down, now! */
};
enum {
HANA_ONMARKEDDOWN_NONE = 0,
HANA_ONMARKEDDOWN_SHUTDOWNSESSIONS, /* Shutdown peer sessions */
};
enum {
HANA_ONMARKEDUP_NONE = 0,
HANA_ONMARKEDUP_SHUTDOWNBACKUPSESSIONS, /* Shutdown peer sessions */
};
enum {
HANA_OBS_NONE = 0,
HANA_OBS_LAYER4, /* Observe L4 - for example tcp */
HANA_OBS_LAYER7, /* Observe L7 - for example http */
HANA_OBS_SIZE
};
struct check {
struct xprt_ops *xprt; /* transport layer operations for health checks */
struct connection *conn; /* connection state for health checks */
unsigned short port; /* the port to use for the health checks */
struct buffer *bi, *bo; /* input and output buffers to send/recv check */
struct task *task; /* the task associated to the health check processing, NULL if disabled */
struct timeval start; /* last health check start time */
long duration; /* time in ms took to finish last health check */
short status, code; /* check result, check code */
char desc[HCHK_DESC_LEN]; /* health check description */
int use_ssl; /* use SSL for health checks */
int send_proxy; /* send a PROXY protocol header with checks */
struct list *tcpcheck_rules; /* tcp-check send / expect rules */
struct tcpcheck_rule *current_step; /* current step when using tcpcheck */
struct tcpcheck_rule *last_started_step;/* pointer to latest tcpcheck rule started */
int inter, fastinter, downinter; /* checks: time in milliseconds */
enum chk_result result; /* health-check result : CHK_RES_* */
int state; /* state of the check : CHK_ST_* */
int health; /* 0 to rise-1 = bad;
* rise to rise+fall-1 = good */
int rise, fall; /* time in iterations */
int type; /* Check type, one of PR_O2_*_CHK */
char *send_string; /* optionally send a string when connecting to the agent */
int send_string_len; /* length of agent command string */
struct server *server; /* back-pointer to server */
char **argv; /* the arguments to use if running a process-based check */
char **envp; /* the environment to use if running a process-based check */
struct pid_list *curpid; /* entry in pid_list used for current process-based test, or -1 if not in test */
struct sockaddr_storage addr; /* the address to check */
};
struct check_status {
short result; /* one of SRV_CHK_* */
char *info; /* human readable short info */
char *desc; /* long description */
};
struct extcheck_env {
char *name; /* environment variable name */
int vmaxlen; /* value maximum length, used to determine the required memory allocation */
};
struct analyze_status {
char *desc; /* description */
unsigned char lr[HANA_OBS_SIZE]; /* result for l4/l7: 0 = ignore, 1 - error, 2 - OK */
};
/* possible actions for tcpcheck_rule->action */
enum {
TCPCHK_ACT_SEND = 0, /* send action, regular string format */
TCPCHK_ACT_EXPECT, /* expect action, either regular or binary string */
TCPCHK_ACT_CONNECT, /* connect action, to probe a new port */
TCPCHK_ACT_COMMENT, /* no action, simply a comment used for logs */
};
/* flags used by tcpcheck_rule->conn_opts */
#define TCPCHK_OPT_NONE 0x0000 /* no options specified, default */
#define TCPCHK_OPT_SEND_PROXY 0x0001 /* send proxy-protocol string */
#define TCPCHK_OPT_SSL 0x0002 /* SSL connection */
struct tcpcheck_rule {
struct list list; /* list linked to from the proxy */
int action; /* action: send or expect */
char *comment; /* comment to be used in the logs and on the stats socket */
/* match type uses NON-NULL pointer from either string or expect_regex below */
/* sent string is string */
char *string; /* sent or expected string */
int string_len; /* string lenght */
struct my_regex *expect_regex; /* expected */
int inverse; /* 0 = regular match, 1 = inverse match */
unsigned short port; /* port to connect to */
unsigned short conn_opts; /* options when setting up a new connection */
};
#endif /* _TYPES_CHECKS_H */