mirror of
https://github.com/haproxy/haproxy.git
synced 2026-02-03 20:39:41 -05:00
HAProxy - Load balancer
ff64d3b027
It is very difficult to map a panic dump against a gdb thread dump
because the thread numbers do not match. However gdb provides the
pthread ID but this one is supposed to be opaque and not to be cast
to a scalar.
This patch provides a fnuction, ha_get_pthread_id() which retrieves
the pthread ID of the indicated thread and casts it to an unsigned
long long so as to lose the least possible amount of information from
it. This is done cleanly using a union to maintain alignment so as
long as these IDs are stored on 1..8 bytes they will be properly
reported. This ID is now presented in the panic dumps so it now
becomes possible to map these threads. When threads are disabled,
zero is returned. For example, this is a panic dump:
Thread 1 is about to kill the process.
*>Thread 1 : id=0x7fe92b825180 act=0 glob=0 wq=1 rq=0 tl=0 tlsz=0 rqsz=0
stuck=1 prof=0 harmless=0 wantrdv=0
cpu_ns: poll=5119122 now=2009446995 diff=2004327873
curr_task=0xc99bf0 (task) calls=4 last=0
fct=0x592440(task_run_applet) ctx=0xca9c50(<CLI>)
strm=0xc996a0 src=unix fe=GLOBAL be=GLOBAL dst=<CLI>
rqf=848202 rqa=0 rpf=80048202 rpa=0 sif=EST,200008 sib=EST,204018
af=(nil),0 csf=0xc9ba40,8200
ab=0xca9c50,4 csb=(nil),0
cof=0xbf0e50,1300:PASS(0xc9cee0)/RAW((nil))/unix_stream(20)
cob=(nil),0:NONE((nil))/NONE((nil))/NONE(0)
call trace(20):
| 0x59e4cf [48 83 c4 10 5b 5d 41 5c]: wdt_handler+0xff/0x10c
| 0x7fe92c170690 [48 c7 c0 0f 00 00 00 0f]: libpthread:+0x13690
| 0x7ffce29519d9 [48 c1 e2 20 48 09 d0 48]: linux-vdso:+0x9d9
| 0x7ffce2951d54 [eb d9 f3 90 e9 1c ff ff]: linux-vdso:__vdso_gettimeofday+0x104/0x133
| 0x57b484 [48 89 e6 48 8d 7c 24 10]: main+0x157114
| 0x50ee6a [85 c0 75 76 48 8b 55 38]: main+0xeaafa
| 0x50f69c [48 63 54 24 20 85 c0 0f]: main+0xeb32c
| 0x59252c [48 c7 c6 d8 ff ff ff 44]: task_run_applet+0xec/0x88c
Thread 2 : id=0x7fe92b6e6700 act=0 glob=0 wq=0 rq=0 tl=0 tlsz=0 rqsz=0
stuck=0 prof=0 harmless=1 wantrdv=0
cpu_ns: poll=786738 now=1086955 diff=300217
curr_task=0
Thread 3 : id=0x7fe92aee5700 act=0 glob=0 wq=0 rq=0 tl=0 tlsz=0 rqsz=0
stuck=0 prof=0 harmless=1 wantrdv=0
cpu_ns: poll=828056 now=1129738 diff=301682
curr_task=0
Thread 4 : id=0x7fe92a6e4700 act=0 glob=0 wq=0 rq=0 tl=0 tlsz=0 rqsz=0
stuck=0 prof=0 harmless=1 wantrdv=0
cpu_ns: poll=818900 now=1153551 diff=334651
curr_task=0
And this is the gdb output:
(gdb) info thr
Id Target Id Frame
* 1 Thread 0x7fe92b825180 (LWP 15234) 0x00007fe92ba81d6b in raise () from /lib64/libc.so.6
2 Thread 0x7fe92b6e6700 (LWP 15235) 0x00007fe92bb56a56 in epoll_wait () from /lib64/libc.so.6
3 Thread 0x7fe92a6e4700 (LWP 15237) 0x00007fe92bb56a56 in epoll_wait () from /lib64/libc.so.6
4 Thread 0x7fe92aee5700 (LWP 15236) 0x00007fe92bb56a56 in epoll_wait () from /lib64/libc.so.6
We can clearly see that while threads 1 and 2 are the same, gdb's
threads 3 and 4 respectively are haproxy's threads 4 and 3.
This may be backported to 2.0 as it removes some confusion in github issues.
|
||
|---|---|---|
| .github | ||
| contrib | ||
| doc | ||
| ebtree | ||
| examples | ||
| include | ||
| reg-tests | ||
| scripts | ||
| src | ||
| tests | ||
| .cirrus.yml | ||
| .gitignore | ||
| .travis.yml | ||
| BRANCHES | ||
| CHANGELOG | ||
| CONTRIBUTING | ||
| INSTALL | ||
| LICENSE | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| ROADMAP | ||
| SUBVERS | ||
| VERDATE | ||
| VERSION | ||
The HAProxy documentation has been split into a number of different files for ease of use. Please refer to the following files depending on what you're looking for : - INSTALL for instructions on how to build and install HAProxy - BRANCHES to understand the project's life cycle and what version to use - LICENSE for the project's license - CONTRIBUTING for the process to follow to submit contributions The more detailed documentation is located into the doc/ directory : - doc/intro.txt for a quick introduction on HAProxy - doc/configuration.txt for the configuration's reference manual - doc/lua.txt for the Lua's reference manual - doc/SPOE.txt for how to use the SPOE engine - doc/network-namespaces.txt for how to use network namespaces under Linux - doc/management.txt for the management guide - doc/regression-testing.txt for how to use the regression testing suite - doc/peers.txt for the peers protocol reference - doc/coding-style.txt for how to adopt HAProxy's coding style - doc/internals for developer-specific documentation (not all up to date)