upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-04-15 14:29:58 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/modules/Makefile

181 lines
1.8 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-27 21:08:13 -04:00
# $FreeBSD$
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 16:24:29 -04:00
Honour appropriate no-crypto flags.
2000-07-07 05:38:01 -04:00
.if exists(${.CURDIR}/../crypto) && !defined(NOCRYPT)
After some complaints about the dir names, the random device is now in dirs called sys/*/random/ instead of sys/*/randomdev/*. Introduce blocking, but only at startup; the random device will block until the first reseed happens to prevent clients from using untrustworthy output. Provide a read_random() call for the rest of the kernel so that the entropy device does not need to be present. This means that things like IPX no longer need to have "device random" hardcoded into thir kernel config. The downside is that read_random() will provide very poor output until the entropy device is loaded and reseeded. It is recommended that developers do NOT use the read_random() call; instead, they should use arc4random() which internally uses read_random(). Clean up the mutex and locking code a bit; this makes it possible to unload the module again.
2000-10-14 06:59:56 -04:00
_random= random
Honour appropriate no-crypto flags.
2000-07-07 05:38:01 -04:00
.endif
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
SUBDIR= 3dfx \
accf_data \
accf_http \
agp \
aha \
Make AIO a loadable module. Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO will use at_exit(9). Add functions at_exec(9), rm_at_exec(9) which function nearly the same as at_exec(9) and rm_at_exec(9), these functions are called on behalf of modules at the time of execve(2) after the image activator has run. Use a modified version of tegge's suggestion via at_exec(9) to close an exploitable race in AIO. Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral, the problem was that one had to pass it a paramater indicating the number of arguments which were actually the number of "int". Fix it by using an inline version of the AS macro against the syscall arguments. (AS should be available globally but we'll get to that later.) Add a primative system for dynamically adding kqueue ops, it's really not as sophisticated as it should be, but I'll discuss with jlemon when he's around.
2001-12-29 02:13:47 -05:00
aio \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
amr \
an \
aue \
Add device driver support for the Broadcom BCM570x family of gigabit ethernet controllers. This adds support for the 3Com 3c996-T, the SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on Dell PowerEdge 2550 servers. The latter configuration hauls ass: preliminary measurements show TCP speeds of over 900Mbps using only normal size frames. TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping are supported, as well as interrupt moderation. Still need to fix autonegotiation support for 1000baseSX NICs, but beyond that, driver is pretty solid.
2001-09-27 19:55:28 -04:00
bge \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 03:09:27 -04:00
bridge \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
cam \
ccd \
cd9660 \
coda \
cue \
dc \
de \
digi \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 03:09:27 -04:00
dummynet \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
ed \
fdescfs \
fdc \
fs \
fxp \
Hook the gx module up to the build.
2001-10-18 22:21:16 -04:00
gx \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
if_disc \
if_ef \
if_gif \
Make faith loadable, unloadable, and clonable.
2001-09-25 14:40:52 -04:00
if_faith \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
if_ppp \
if_sl \
if_stf \
if_tap \
if_tun \
Attach if_vlan to the build process.
2001-09-05 19:47:46 -04:00
if_vlan \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
ip6fw \
Unbreak ip_mroute_mod
2001-07-25 16:15:17 -04:00
ip_mroute_mod \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
ipfilter \
ipfw \
ispfw \
joy \
kue \
lge \
Connect libiconv to the build. Recent work by fjoe and bp has fixed smbfs. The smbfs module can now be loaded once libiconv and libmchain have been loaded, and works!
2001-12-12 05:11:16 -05:00
libiconv \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
libmchain \
lnc \
The "lomac" module compiles fine on Alpha, too. Tested by: wilko
2001-11-19 15:25:55 -05:00
lomac \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 03:20:44 -05:00
lpt \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
md \
mii \
mlx \
msdosfs \
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 19:32:09 -04:00
nfsclient \
nfsserver \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
nge \
nmdm \
ntfs \
nullfs \
pcn \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 03:20:44 -05:00
plip \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
portalfs \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 03:20:44 -05:00
ppbus \
ppi \
pps \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
${_random} \
rl \
rp \
sf \
sis \
sk \
sn \
snp \
sound \
sppp \
ste \
sym \
syscons \
sysvipc \
ti \
tl \
twe \
tx \
You were knocked senseless by the Boomerang, spun around by the Cyclone, blown over by the Hurricane and had a house dropped on you by the Tornado. Now it's time to have your parade rained on by... the Typhoon! This commit adds driver support for 3Com 3cR990 10/100 ethernet adapters based on the Typhoon I and Typhoon II chipsets. This is actually a port of the OpenBSD driver with many hacks by me. No Virginia, there isn't any support for the hardware crypto yet. However there is support for TCP/IP checksum offload and VLANs. Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for squeezing enough info out of 3Com to get this written, and for doing most of the hard work. Manual page is included. Compiled as a module and included in GENERIC.
2001-07-23 16:44:54 -04:00
txp \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
udbp \
ugen \
uhid \
ukbd \
ulpt \
umapfs \
umass \
umodem \
ums \
unionfs \
urio \
usb \
The USB scanner driver. To be used together with SANE.
2000-10-25 06:34:38 -04:00
uscanner \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
vinum \
vpo \
vr \
vx \
wb \
xl
Add the usb module and move the USB related modules into the generic section USB seems to compile on Alpha's as well.
1999-11-21 22:48:33 -05:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 04:38:13 -04:00
#removed while KSE settles in:
# ncp \
# nwfs \
Don't try to build i386-centric modules on non-i386 systems.
1998-11-04 12:15:07 -05:00
# XXX some of these can move to the general case when de-i386'ed
Fix make world breakage: "$MACHINE_ARCH" -> "${MACHINE_ARCH}".
1998-11-04 13:25:23 -05:00
.if ${MACHINE_ARCH} == "i386"
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
SUBDIR+=aac \
Build the ACPI module by default.
2001-08-29 20:55:22 -04:00
acpi \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
aic \
ar \
- generic Arcnet framework - device driver for SMC COM90cx6 Arcnet network adapters Obtained from: NetBSD
2002-01-08 15:03:13 -05:00
arcnet \
Unbreak alpha builds.
2001-10-24 14:45:35 -04:00
apm \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
asr \
atspeaker \
bktr \
Re-enable the ciss driver, now that it should be building again.
2001-12-02 01:19:15 -05:00
ciss \
- generic Arcnet framework - device driver for SMC COM90cx6 Arcnet network adapters Obtained from: NetBSD
2002-01-08 15:03:13 -05:00
cm \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
coff \
el \
-Remove unneeded include stddef.h -Modify modules Makefile so that em driver compiles only on i386 platform. (Alpha not supported yet) PR: kern/32993 MFC after: 1
2001-12-20 12:55:49 -05:00
em \
Make the fe driver kernel object module to compile in default. Reviewed by: imp
2001-09-02 02:43:45 -04:00
fe \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
fpu \
gnufpu \
ibcs2 \
Add the 'iir' driver, for the Intel Integrated RAID controllers and prior ICP Vortex models. This driver was developed by Achim Leubner of Intel (previously with ICP Vortex) and Boji Kannanthanam of Intel. Submitted by: "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> MFC after: 2 weeks
2002-01-20 03:51:08 -05:00
iir \
Linux compiles broken on alpha again. Remove.
2001-10-19 01:04:02 -04:00
linux \
Add modules of scsi_low based SCSI drivers ncv, nsp, stg, and common part scsi_low. Submitted-by: takawata
2001-12-15 07:44:38 -05:00
ncv \
nsp \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
mly \
Linux compiles broken on alpha again. Remove.
2001-10-19 01:04:02 -04:00
netgraph \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
oltr \
pecoff \
ray \
s3 \
Add driver for Granch SBNI12-xx ISA and PCI network adapters. MFC after: 1 week
2001-11-21 17:29:35 -05:00
sbni \
Add modules of scsi_low based SCSI drivers ncv, nsp, stg, and common part scsi_low. Submitted-by: takawata
2001-12-15 07:44:38 -05:00
scsi_low \
Enable build of smbfs. It works now as before on both UP and MP machines.
2001-12-02 04:01:35 -05:00
smbfs \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
splash \
sr \
Add modules of scsi_low based SCSI drivers ncv, nsp, stg, and common part scsi_low. Submitted-by: takawata
2001-12-15 07:44:38 -05:00
stg \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 00:55:37 -04:00
streams \
vesa \
wi
Don't try to build i386-centric modules on non-i386 systems.
1998-11-04 12:15:07 -05:00
.endif
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 16:24:29 -04:00
Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R support which use National Semiconductor DP8393X (SONIC) as ethernet controller. Currently, this driver is used on only PC-98. Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp> Obtained from: NetBSD/pc98
2000-10-02 10:27:20 -04:00
.if ${MACHINE} == "pc98"
Remove duplicate apm entry for pc98
2001-10-28 00:34:24 -04:00
SUBDIR+=pmc \
Unbreak alpha builds.
2001-10-24 14:45:35 -04:00
snc
Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R support which use National Semiconductor DP8393X (SONIC) as ethernet controller. Currently, this driver is used on only PC-98. Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp> Obtained from: NetBSD/pc98
2000-10-02 10:27:20 -04:00
.endif
Enable building of the OSF/1 compat module.
1999-12-15 08:14:23 -05:00
.if ${MACHINE_ARCH} == "alpha"
Build the linux module on Alpha again. Note that the linux module is not added to the MI list of modules. The current state of affairs is such that the linux module is the exception, not the common case.
2001-10-19 04:33:56 -04:00
SUBDIR+=linux \
osf1
Enable building of the OSF/1 compat module.
1999-12-15 08:14:23 -05:00
.endif
Conditionalize building of ex2fs module by WANT_EXT2FS_MODULE
2001-09-15 05:35:10 -04:00
.if defined(WANT_EXT2FS_MODULE)
SUBDIR+=ext2fs
.endif
Add support for MODULES_OVERRIDE. This is a list of modules to build instead of all of them. You can put this in /etc/make.conf or in makeoptions. Reviewed by: arch@ # docs to follow.
2001-04-02 04:52:05 -04:00
.if defined(MODULES_OVERRIDE)
SUBDIR=${MODULES_OVERRIDE}
.endif
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 07:21:06 -04:00
# Calling kldxref(8) for each module is expensive.
.if !defined(NO_XREF)
.MAKEFLAGS:= ${.MAKEFLAGS} -DNO_XREF
afterinstall:
-kldxref ${DESTDIR}${KMODDIR}
.endif
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 16:24:29 -04:00
.include <bsd.subdir.mk>
Reference in a new issue Copy permalink