opnsense-src/sys/modules/esp/Makefile

# $FreeBSD$

.PATH: ${SRCTOP}/sys/dev/esp

KMOD=	esp
SRCS=	device_if.h esp_pci.c ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if}
SRCS+=	opt_cam.h pci_if.h

.if ${MACHINE} == "sparc64"
ofw_bus_if=	ofw_bus_if.h
esp_sbus=	esp_sbus.c
.endif

.include <bsd.kmod.mk>
Port the NetBSD esp(4) driver. This only includes the sbus front-end, so its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2 machines. Once the pci front-end is ported, this driver can replace the amd(4) driver. The code as-is is fairly stable. I've disabled tagged-queueing until I can figure out a corruption bug related to it. I'm importing it now so that people with these machines can (finally) stop netbooting and report bugs before 5.3. 2004-06-10 01:11:39 -04:00			`# $FreeBSD$`

sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon 2017-03-04 05:10:17 -05:00			`.PATH: ${SRCTOP}/sys/dev/esp`
Port the NetBSD esp(4) driver. This only includes the sbus front-end, so its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2 machines. Once the pci front-end is ported, this driver can replace the amd(4) driver. The code as-is is fairly stable. I've disabled tagged-queueing until I can figure out a corruption bug related to it. I'm importing it now so that people with these machines can (finally) stop netbooting and report bugs before 5.3. 2004-06-10 01:11:39 -04:00
			`KMOD= esp`
Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 2011-11-01 17:26:57 -04:00			`SRCS= device_if.h esp_pci.c ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if}`
			`SRCS+= opt_cam.h pci_if.h`
Port the NetBSD esp(4) driver. This only includes the sbus front-end, so its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2 machines. Once the pci front-end is ported, this driver can replace the amd(4) driver. The code as-is is fairly stable. I've disabled tagged-queueing until I can figure out a corruption bug related to it. I'm importing it now so that people with these machines can (finally) stop netbooting and report bugs before 5.3. 2004-06-10 01:11:39 -04:00
Don't build unused SBus front-ends for sun4v, don't build EBus front-ends which are also likely to be irrelevant for sun4v (there's no SBus on sun4v and only some EBus devices). While at it fix some style bugs according to style.Makefile(5) where appropriate. MFC after: 3 days 2008-05-04 10:59:25 -04:00			`.if ${MACHINE} == "sparc64"`
			`ofw_bus_if= ofw_bus_if.h`
			`esp_sbus= esp_sbus.c`
Port the NetBSD esp(4) driver. This only includes the sbus front-end, so its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2 machines. Once the pci front-end is ported, this driver can replace the amd(4) driver. The code as-is is fairly stable. I've disabled tagged-queueing until I can figure out a corruption bug related to it. I'm importing it now so that people with these machines can (finally) stop netbooting and report bugs before 5.3. 2004-06-10 01:11:39 -04:00			`.endif`

			`.include <bsd.kmod.mk>`