upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-03-07 15:51:20 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions
opnsense-src/sys/modules/dtrace/fasttrap/Makefile

31 lines
832 B
Makefile
Raw Normal View History

Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
# $FreeBSD$
sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon
2017-03-04 05:10:17 -05:00
SYSDIR?= ${SRCTOP}/sys
Use SYSDIR to reference to the top of the sys hierarchy. Define SYSDIR relative to .CURDIR if not already defined. This makes the makefiles more readable but also more re-usable and adaptable. Obtained from: Juniper Networks, Inc.
2014-03-05 20:59:13 -05:00
.PATH: ${SYSDIR}/cddl/contrib/opensolaris/uts/common/dtrace
Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
KMOD= fasttrap
Move most of the contents of opt_compat.h to opt_global.h. opt_compat.h is mentioned in nearly 180 files. In-progress network driver compabibility improvements may add over 100 more so this is closer to "just about everywhere" than "only some files" per the guidance in sys/conf/options. Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h is created on all architectures. Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the set of compiled files. Reviewed by: kib, cem, jhb, jtl Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D14941
2018-04-06 13:35:35 -04:00
SRCS= fasttrap.c fasttrap_isa.c
Merge OpenZFS support in to HEAD. The primary benefit is maintaining a completely shared code base with the community allowing FreeBSD to receive new features sooner and with less effort. I would advise against doing 'zpool upgrade' or creating indispensable pools using new features until this change has had a month+ to soak. Work on merging FreeBSD support in to what was at the time "ZFS on Linux" began in August 2018. I first publicly proposed transitioning FreeBSD to (new) OpenZFS on December 18th, 2018. FreeBSD support in OpenZFS was finally completed in December 2019. A CFT for downstreaming OpenZFS support in to FreeBSD was first issued on July 8th. All issues that were reported have been addressed or, for a couple of less critical matters there are pull requests in progress with OpenZFS. iXsystems has tested and dogfooded extensively internally. The TrueNAS 12 release is based on OpenZFS with some additional features that have not yet made it upstream. Improvements include: project quotas, encrypted datasets, allocation classes, vectorized raidz, vectorized checksums, various command line improvements, zstd compression. Thanks to those who have helped along the way: Ryan Moeller, Allan Jude, Zack Welch, and many others. Sponsored by: iXsystems, Inc. Differential Revision: https://reviews.freebsd.org/D25872
2020-08-24 22:21:27 -04:00
SRCS+= vnode_if.h opt_global.h
Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
Merge OpenZFS support in to HEAD. The primary benefit is maintaining a completely shared code base with the community allowing FreeBSD to receive new features sooner and with less effort. I would advise against doing 'zpool upgrade' or creating indispensable pools using new features until this change has had a month+ to soak. Work on merging FreeBSD support in to what was at the time "ZFS on Linux" began in August 2018. I first publicly proposed transitioning FreeBSD to (new) OpenZFS on December 18th, 2018. FreeBSD support in OpenZFS was finally completed in December 2019. A CFT for downstreaming OpenZFS support in to FreeBSD was first issued on July 8th. All issues that were reported have been addressed or, for a couple of less critical matters there are pull requests in progress with OpenZFS. iXsystems has tested and dogfooded extensively internally. The TrueNAS 12 release is based on OpenZFS with some additional features that have not yet made it upstream. Improvements include: project quotas, encrypted datasets, allocation classes, vectorized raidz, vectorized checksums, various command line improvements, zstd compression. Thanks to those who have helped along the way: Ryan Moeller, Allan Jude, Zack Welch, and many others. Sponsored by: iXsystems, Inc. Differential Revision: https://reviews.freebsd.org/D25872
2020-08-24 22:21:27 -04:00
CFLAGS+= -include ${.OBJDIR}/opt_global.h
CFLAGS+= ${OPENZFS_CFLAGS}
Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 02:13:29 -04:00
.if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386"
Use SYSDIR to reference to the top of the sys hierarchy. Define SYSDIR relative to .CURDIR if not already defined. This makes the makefiles more readable but also more re-usable and adaptable. Obtained from: Juniper Networks, Inc.
2014-03-05 20:59:13 -05:00
CFLAGS+= -I${SYSDIR}/cddl/contrib/opensolaris/uts/intel
.PATH: ${SYSDIR}/cddl/contrib/opensolaris/uts/intel/dtrace
Add fasttrap for PowerPC. This is the last piece of the dtrace/ppc puzzle. It's incomplete, it doesn't contain full instruction emulation, but it should be sufficient for most cases. MFC after: 1 month
2013-10-15 11:00:29 -04:00
.elif ${MACHINE_CPUARCH} == "powerpc"
Use SYSDIR to reference to the top of the sys hierarchy. Define SYSDIR relative to .CURDIR if not already defined. This makes the makefiles more readable but also more re-usable and adaptable. Obtained from: Juniper Networks, Inc.
2014-03-05 20:59:13 -05:00
CFLAGS+= -I${SYSDIR}/cddl/contrib/opensolaris/uts/powerpc
.PATH: ${SYSDIR}/cddl/contrib/opensolaris/uts/powerpc/dtrace
Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
.endif
Avoid using ${.CURDIR} so that the module can be built from multiple directories. Obtained from: Juniper Networks, Inc.
2014-07-26 13:24:58 -04:00
.PATH: ${SYSDIR}/cddl/contrib/opensolaris/common/unicode
Revert r268007, and re-adapt MFV r260708: 4427 pid provider rejects probes with valid UTF-8 names Use of u8_textprep.c required -Wno-cast-qual for powerpc. MFC after: 2 weeks
2014-07-01 11:36:05 -04:00
SRCS+= u8_textprep.c
Add the DTrace kernel module makefiles.
2008-05-16 22:31:19 -04:00
.include <bsd.kmod.mk>
opensolaris code: translate INVARIANTS to DEBUG and ZFS_DEBUG Do this by forcing inclusion of sys/cddl/compat/opensolaris/sys/debug_compat.h via -include option into all source files from OpenSolaris. Note that this -include option must always be after -include opt_global.h. Additionally, remove forced definition of DEBUG for some modules and fix their build without DEBUG. Also, meaning of DEBUG was overloaded to enable WITNESS support for some OpenSolaris (primarily ZFS) locks. Now this overloading is removed and that use of DEBUG is replaced with a new option OPENSOLARIS_WITNESS. MFC after: 17 days
2013-08-06 11:51:56 -04:00
Use SYSDIR to reference to the top of the sys hierarchy. Define SYSDIR relative to .CURDIR if not already defined. This makes the makefiles more readable but also more re-usable and adaptable. Obtained from: Juniper Networks, Inc.
2014-03-05 20:59:13 -05:00
CFLAGS+= -include ${SYSDIR}/cddl/compat/opensolaris/sys/debug_compat.h
Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support CWARNFALGS.$file centrally so we don't have to have it in all the places. Remove a few warning flags that are no longer needed. Also, always use -Wno-unknown-pragma to (hopefully temporarily) work around #pragma ident in debug.h in the opensolaris code. Remove some stale warning suppression that's no longer necessary.
2015-01-02 22:35:18 -05:00
Revert r268007, and re-adapt MFV r260708: 4427 pid provider rejects probes with valid UTF-8 names Use of u8_textprep.c required -Wno-cast-qual for powerpc. MFC after: 2 weeks
2014-07-01 11:36:05 -04:00
CWARNFLAGS+= -Wno-cast-qual
opensolaris code: translate INVARIANTS to DEBUG and ZFS_DEBUG Do this by forcing inclusion of sys/cddl/compat/opensolaris/sys/debug_compat.h via -include option into all source files from OpenSolaris. Note that this -include option must always be after -include opt_global.h. Additionally, remove forced definition of DEBUG for some modules and fix their build without DEBUG. Also, meaning of DEBUG was overloaded to enable WITNESS support for some OpenSolaris (primarily ZFS) locks. Now this overloading is removed and that use of DEBUG is replaced with a new option OPENSOLARIS_WITNESS. MFC after: 17 days
2013-08-06 11:51:56 -04:00
CWARNFLAGS+= -Wno-unused
Reference in a new issue Copy permalink