Similarly to what done for iflib in 1d238b07d5,
this patch prevents access to the krings during the interface
reset triggered by netmap_register().
MFC after: 1 week
The nm_register callback needs to call nm_set_native_flags()
or nm_clear_native_flags() once the device has been stopped.
However, in the current implementation this is not true,
as the device is stopped by vtnet_init_locked(). This causes
race conditions where the driver crashes as soon as it
dequeues netmap buffers assuming they are mbufs (or the other
way around).
To fix the issue, we extend vtnet_init_locked() with a second
argument that, if not zero, will set/clear the netmap flags.
This results in a huge simplification of the nm_register
callback itself.
Also, use netmap_reset() to check if a ring is going to be
re-initialized in netmap mode.
MFC after: 1 week
This function returns NULL if the ring identified by
queue id and direction is in netmap mode. Otherwise
return the corresponding kring.
Use this function to replace vtnet_netmap_queue_on().
MFC after: 1 week
This change prevents a race that happens when rxsync dequeues
N-1 rx packets (with N being the size of the netmap rx ring).
In this situation, the loop exits without re-enabling the
rx interrupts, thus causing the VQ to stall.
MFC after: 1 week
The new index tracks the next netmap slot that is going
to be enqueued into the virtqueue. The index is necessary
to prevent the receive VQ and the netmap rx ring from going
out of sync, considering that we never enqueue N slots, but
at most N-1. This change fixes a bug that causes the VQ
and the netmap ring to go out of sync after N-1 packets
have been received.
MFC after: 1 week
netmap assumes the one "slot" is left unused to distinguish
the empty ring and full ring conditions. This assumption was
violated by vtnet_netmap_rxq_populate().
MFC after: 1 week
The functionality contained in this function is duplicated,
as it is already available in vtnet_txq_free_mbufs()
and vtnet_rxq_free_mbufs().
MFC after: 1 week
The vtnet_netmap_rxq_populate() function erroneously assumed
that kring->nr_hwcur = 0, i.e. the kring was in the initial
state. However, this is not always the case: for example,
when a vtnet reinit is triggered by some changes in the
interface flags or capenable.
This patch changes the behaviour of vtnet_netmap_kring_refill()
so that it always starts publishing the netmap buffers starting
from the current value of kring->nr_hwcur.
MFC after: 1 week
Changelist:
- Replace ND, D and RD macros with nm_prdis, nm_prinf, nm_prerr
and nm_prlim, to avoid possible naming conflicts.
- Add netmap_krings_mode_commit() helper function and use that
to reduce code duplication.
- Refactor pipes control code to export some functions that
can be reused by the veth driver (on Linux) and epair(4).
- Add check to reject API requests with version less than 11.
- Small code refactoring for the null adapter.
MFC after: 1 week
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
netmap(4) support for vtnet(4) was incomplete and had multiple bugs.
This commit fixes those bugs to bring netmap on vtnet in a functional state.
Changelist:
- handle errors returned by virtqueue_enqueue() properly (they were
previously ignored)
- make sure netmap XOR rest of the kernel access each virtqueue.
- compute the number of netmap slots for TX and RX separately, according to
whether indirect descriptors are used or not for a given virtqueue.
- make sure sglist are freed according to their type (mbufs or netmap
buffers)
- add support for mulitiqueue and netmap host (aka sw) rings.
- intercept VQ interrupts directly instead of intercepting them in txq_eof
and rxq_eof. This simplifies the code and makes it easier to make sure
taskqueues are not running for a VQ while it is in netmap mode.
- implement vntet_netmap_config() to cope with changes in the number of queues.
Reviewed by: bryanv
Approved by: gnn (mentor)
MFC after: 3 days
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D17916
Changelist:
- Turn tx_rings and rx_rings arrays into arrays of pointers to kring
structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
vtnet and ptnet drivers to cope with the change.
- Generalize the nm_config() callback to accept a struct containing many
parameters.
- Introduce NKR_FAKERING to support buffers sharing (used for netmap
pipes)
- Improved API for external VALE modules.
- Various bug fixes and improvements to the netmap memory allocator,
including support for externally (userspace) allocated memory.
- Refactoring of netmap pipes: now linked rings share the same netmap
buffers, with a separate set of kring pointers (rhead, rcur, rtail).
Buffer swapping does not need to happen anymore.
- Large refactoring of the control API towards an extensible solution;
the goal is to allow the addition of more commands and extension of
existing ones (with new options) without the need of hacks or the
risk of running out of configuration space.
A new NIOCCTRL ioctl has been added to handle all the requests of the
new control API, which cover all the functionalities so far supported.
The netmap API bumps from 11 to 12 with this patch. Full backward
compatibility is provided for the old control command (NIOCREGIF), by
means of a new netmap_legacy module. Many parts of the old netmap.h
header has now been moved to netmap_legacy.h (included by netmap.h).
Approved by: hrs (mentor)
Changelist:
- remove unused nkr_slot_flags
- new nm_intr adapter callback to enable/disable interrupts
- remove unused sysctls and document the other sysctls
- new infrastructure to support NS_MOREFRAG for NIC ports
- support for external memory allocator (for now linux-only),
including linux-specific changes in common headers
- optimizations within netmap pipes datapath
- improvements on VALE control API
- new nm_parse() helper function in netmap_user.h
- various bug fixes and code clean up
Approved by: hrs (mentor)
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:
- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)
- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)
- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html
- fix rx CRC handing on ixl
- add module dependencies for netmap when building drivers as modules
- minor simplifications to device-specific routines (*txsync, *rxsync)
- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,
Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).
Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.
MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.
Basically no user API changes (some bugfixes in sys/net/netmap_user.h).
In detail:
1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.
2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial
3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.
4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.
5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).
A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.
Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.
This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.
A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.
MFC after: 3 days.
