These includes were for __FBSD_RCSID() macro. They weren't formatted
like the rest of the tree so weren't trimmed automatically when that
script was run. Trim them now.
MFC After: 1 week
Sponsored by: Netflix
(cherry picked from commit ca48e43ba9ee73a07cdbad8365117793b01273bb)
Almost all code related to the saf1761 driver was removed in commit
44796b7e82, except for two small bits related to saf1761otg support.
This patch completes the removal.
PR: 279302
Signed-off-by: Joshua Kinard <freebsd@kumba.dev>
Reviewed by: mhorne
MFC after: 3 days
Fixes: 44796b7e82 ("mips: remove saf1761")
(cherry picked from commit 80828c6fab0292b5c5a34a63558d837cb9308fbd)
Like other dwc3 controller, on Xilinx ZynqMP the base node is just here
to provide resets, the main dwc3 controller node is a child node.
Sponsored by: Beckhoff Automation GmbH & Co. KG
The XHCI controller on 64-bit SoCs need to use 64-bit DMA.
Add a quirk to tell the generic XHCI driver that 32-bit DMA needs
to be used, if there are any that may need to use 32-bit DMA only.
Reviewed by: andrew
Obtained from: Juniper Networks, Inc.
While at it, correct the string for 300 series ones, these also are
already xHCI 3.1.
Fixes: d171d2f2 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
And minor style fixes.
Reviewed by: hselasky
Tested by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Fixes: 0d7064d58f xhci(4): Add new USB IDs
Differential Revision: https://reviews.freebsd.org/D38921
Polling is currently only implemented in the xhci pci attachment.
Adding it to dwc3 doesn't make it much uglier, and supporting it can be
useful for confirming that hardware's otherwise functional when
interrupts are apparently not firing.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D38816
We shouldn't force USB2 only based on if we have an external PHY.
The internal PHY register tell us what link speed we can acheive
and we need to force USB2 only if it cannot do USB3.
This is only available after revision 0x290A of the dwc3 IP.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37394
Fixed: 1331c0f44b ("Add support for RockChip RK356X to DWC3 driver.")
Sponsored by: Beckhoff Automation GmbH & Co. KG
We need to enable some quirks based on the version so read it.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37393
Sponsored by: Beckhoff Automation GmbH & Co. KG
Usually dwc3 needs a glue node that contain the SoC specific clocks/resets.
For some reason the RK3328 DTS doesn't have this glue node and the clocks
are specified in the dwc3 node directly.
The bindings says that it is allowed but doesn't specified some strict names
for them.
Add a specific case for RK3328 based on the compatible string.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37392
Sponsored by: Beckhoff Automation GmbH & Co. KG
The SAN interceptors simply take a bus_space_tag_t, so we're
dropping qualifiers here. const semantics with a ptr typedef mean we'd
have to drop or change the bus_space_tag_t abstraction used in the SAN
sanitizers in order to make a compatible change there, which likely
isn't worth it.
Reviewed by: andrew, markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D36764
For RK356x platform, we can set bit 26 of DWC3_GUCTL1 register
for usb 2.0 device.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D36211
Split the current FDT-only implementation up into an FDT and an
ACPI part reusing and sharing as much code as possible (thanks mw!).
This makes the Synopsis XHCI root hubs attach correctly on SolidRun's
HoenyComb instead of just the generic XHCI root and this means we
are also doing proper chip setup and applying the quirk needed there [1].
There is one problem with ACPI attachment in that it uses the generic
XHCI PNP ID. So we need to do extra checks in order to not claim
all xhci, which means we check for a known quirk to be present
in acpi_probe. Long term this isn't scaling and this was discussed
in SolidRun's Discord Channel in 2021 with the intend that "jnettlet"
will take this to a steering committee. Since then ACPI has kind-of
become a technology non grata (due to not getting changes into Linux
timely) so it is unclear if this will ever happen. If there will be
further hardware with dwc3/ACPI we should go and make sure this problem
gets solved.
[1] 24698f90b7/Silicon/NXP/LX2160A/AcpiTables/Dsdt/Usb.asl
Reviewed by: manu, mw
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D32256
During the review of 09cdf4878c we
switched from cached registers to reading them as needed.
One read of the two reads was moved after the softreset got triggered
and as a result returned 0 rather than the proper register value.
Moving the read before the softreset gets initiated seems to make
things work again and xhci.c no longer complains about
"Controller does not support 4K page size.".
MFC after: 10 days
X-MFC with: 09cdf4878c
Pointy hat to: bz
Rather than hiding behind #if 0, hide the debugging behind DWC3_DEBUG
so it can be turned on with a single define. Require bootverbose
to print anything so we can still avoid spamming the console if DWC3_DEBUG
is on.
Harmonize the format string in snsp_dwc3_dump_regs() to always print the
full register and also print the XHCI quirks.
Call snsp_dwc3_dump_regs() twice, before and after generic XHCI attachment
and initialisation as this may have an effect on the confirgumation state.
Obtained from: an old debug patch
MFC after: 2 weeks
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D35700
Rather than just printing the Global SNPS ID Register store it as well
so we can do a version check later.
In addition, for debugging purposes, read the Global Hardware Parameters
Registers and print them.
Based on the snpsid disable an XHCI feature using a quirk prepared
in 447c418da0.
Add the "snps,dis_u3_susphy_quirk" quirk and handle Suspend USB3.0 SS PHY
after power-on-reset/during core initialization (suggested to be cleared)
based on the DWC3_GHWPARAMS0 register.
MFC after: 2 weeks
Obtained from: an old debugging patch
Reviewed by: mw (earlier version), mmel
Differential Revision: https://reviews.freebsd.org/D35699
Enable dwc3's auto retry feature. For IN transfers with crc errors
or internal overruns this will make the host reply with a
non-terminating retry ACK. I believe the hope was to improve
reliability after seeing occasional hiccups.
Obtained from: an old debugging patch
MFC after: 2 weeks
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D35698
If snps,dis-del-phy-power-chg-quirk is set, the register bit should be
cleared not ored on (it's the "dis" version).
MFC after: 2 weeks
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D35697
Switch the driver to use device based functions which will work not
only with FDT but also ACPI.
While here make dr_mode a local variable as it is only used during
probe and not needed later in the softc.
MFC after: 2 weeks
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D33170
While XHCI is very generic some revisions of chipsets have problems.
On dwc3 <= 3.00a Port Disable does not seem to work so we need to not
enable it.
For that introduce quirks to xhci so that controllers can steer
certain features. I would hope that this is and remains the only one.
Obtained from: an old patch mainly debugging other problems
MFC after: 2 weeks
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D35482
