updated, and until further testing can be done, this is disabled for now.
It is expected arm64 will switch to this interface, and the old interface
will be removed before 11.0 is released.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
disabled, however when we enable it it will default to assume memory is
not cache-coherent, unless either the tag was created or the parent was
marked as cache-coherent.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
To maintain coherence between cache and DMA memory appropriate
shareability flags need to be set in the PTE regardless of SMP
option.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6231
the physmap. This will reduce the likelihood of an issue where we have
device memory mapped in the DMAP. This can only happen if it is within the
same 1G block of normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5938
2TB. The latter can be increased in 512GB chunks by adjusting the lower
address, however more work will be needed to increase the former.
There is still some work needed to only create a DMAP region for the RAM
address space as on ARM architectures all mappings should have the same
memory attributes, and these will be different for device and normal memory.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5859
Allow using DTRACE for performance analysis of userspace
applications - the function call stack can be captured.
This is almost an exact copy of AMD64 solution.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: emaste, gnn, jhibbits
Differential Revision: https://reviews.freebsd.org/D5779
This optimization attempts to utylize as wide as possible register store instructions to zero large buffers.
The implementation, if possible, will use 'dc zva' to zero buffer by cache lines.
Speedup: 60x faster memory zeroing
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5726
increased to 256TiB. The kernel address space can also be increased to be
the same size, but this will be performed in a later change.
To help work with an extra level of page tables two new functions have
been added, one to file the lowest level table entry, and one to find the
block/page level. Both of these find the entry for a given pmap and virtual
address.
This has been tested with a combination of buildworld, stress2 tests, and
by using sort to consume a large amount of memory by sorting /dev/zero. No
new issues are known to be present from this change.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5720
from userpsace. Previously we could have triggered a panic by trying to
jump to a kernel address from userland as the trap handling code thought we
received an ast in kernel mode.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Need this for gem5, but was not needed on real hadrware (yet) as it
was always MSI.
Reviewed by: andrew, jhb
Discovered by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D5494
Enable system register access for EL2. Alpine-V2 is
the first device requiring this to be enabled.
It is also in-sync with Linux initialization code,
and compatible with Alpine-V2 uboot requirements.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: wma
Differential revision: https://reviews.freebsd.org/D5394
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5122
number of physical memory locations we can access. This is the case on
some HiKey boards that may have UEFI reserved memory dispersed through the
physical space.
Sponsored by: ABT Systems Ltd
the processor and debug state registers. A flag has been added to the pcb
to tell us when to enable single stepping for a given thread.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4730
Provide an easy to use framework for ARM64 DDB disassembler.
This commit does not contain full list of instruction opcodes.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb, andrew, cognet
Differential revision: https://reviews.freebsd.org/D5114
tree parsing opt-out rather than opt-in. All FDT-based systems as well as
PowerPC systems with real Open Firmware use the CHRP-derived binding that
includes it, which makes SPARC the odd man out here. Making it opt-out
avoids astonishment on new platform bring up.
information on what the core supports. In most cases these will be
identical across most CPUs in the SoC, however there may be the case where,
with a big.LITTLE setup they may differ. In this case we print the
decoded data on all CPUs.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4725
possible future CPU extentions with larger registers.
jmp_buf's size and alignment are baked into the ABI of third party libraries
and thus are very hard to change later so it is best to waste a small amount
of space now.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D3956
the #address-cells property set. For this we need to read more data before
the parent interrupt description.
this is only enabled on arm64 for now as it's not quite compliant with the
ePAPR spec. We should use a default of 2 where the #address-cells property
is missing, however this will need further testing across architectures.
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D4518
clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
atomic functions where they are almost identical, or have acquire/release
semantics.
While here clean these function up. The cbnz instruction doesn't change
the condition flags so drop cc, however they should have memory added to the
clobber list.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4318
place physical memory at an address outside the old DMAP range. This is an
issue as we rely on being able to move from PA -> VA using this range.
Obtained from: Patrick Wildt <patrick@bitrig.org> (earlier version)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3885
the dynamic linker copy them, but not relocate them at the new location.
This allows us to run sqlite3 without it crashing.
Sponsored by: ABT Systems Ltd
boot on an SoC that places physical memory at an address past where three
levels of page tables can access in an identity mapping.
Submitted by: Wojciech Macek <wma@semihalf.com>,
Patrick Wildt <patrick@bitrig.org>
Differential Revision: https://reviews.freebsd.org/D3885 (partial)
Differential Revision: https://reviews.freebsd.org/D3744
in unknown state per spec.
Reviewed by: andrew (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3668
Currently FreeBSD supports only single PIC controller. Some systems
that have more than one (like ThunderX dual-socket) fails to boot.
Disable other PICes until proper handling is implemented in the
generic interrupt code.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3682
Increase MAXCPU number to the maximum known value the existing
hardware can support.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3405
Introduce supprot for SMP to GICv3 and ITS drivers.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3299
in savectx where it will be used to store the current state however will
pass in a pcb when vfp_save_state expected a thread pointer.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This is copied from the amd64 version with minor changes. These should be
merged into a single file as from a quick look there are other copies of
the same file in other parts of the tree.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
