Commit message for r321173 incorrectly stated that the change disables
automatic stack growth from the AIO daemons contexts, with explanation
that this is currently prevents applying wrong resource limits. Fix
this by actually disabling the growth.
Noted by: alc
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The description is FreeBSD-specific and was added in r266497
to fix PR189865.
PR: 220825
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
mps_wait_command() and mpr_wait_command() were using getmicrotime() to
determine elapsed time when checking for a timeout in polled mode.
getmicrotime() isn't guaranteed to monotonically increase, and that
caused spurious timeouts occasionally.
Switch to using getmicrouptime(), which does increase monotonically.
This fixes the spurious timeouts in my test case.
Reviewed by: slm, scottl
MFC after: 3 days
Sponsored by: Spectra Logic
It applies to both NFS client and NFS server, and is useful for both.
This is different from vfs.nfsd.enable_stringtouid, which is specific
to server side.
Reviewed by: rmacklem@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
check blocking grow from other processes accesses.
Debugger may access stack grow area with ptrace(2). In this case,
real state of the process is to not have the stack grown, which
provides more accurate inspection. Technical reason to avoid the grow
is to avoid applying wrong process (debugger) stack limit.
This change also has a consequence of making aio workers accesses past
the bottom of stacks into EFAULT, arguably the situation is a
programmers mistake.
Reported by: jhb
Discussed with: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
If we cannot get a phy, do not detach the driver, some boards have phy
always enabled and not exposed.
While here do not release the clocks if we fails as we release them
in a10_ehci_detach.
Tested-on: OrangePi-One
I overlooked the fact that vdev_op_io_done hook is called even if the
actual I/O is skipped, for example, in the case of a missing vdev.
Arguably, this could be considered an issue in the zio pipeline engine,
but for now I am adding defensive code to check for io_bp being NULL
along with assertions that that happens only when it can be really
expected.
PR: 220691
Reported by: peter, cy
Tested by: cy
MFC after: 1 week
X-MFC with: r320156, r320452
Propagate warning flags from kern.opts.mk and then fix minor -Werror
issues when building with gcc from -Wredundant-decls, -Wnested-externs,
-Wuninitialized.
Reviewed by: davidcs
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11413
ZPL_VERSION is unsigned long long, not an int. With this change, a zpool can be
created on a 32-bit system (tested on powerpcspe) and mounted correctly.
Reviewed by: allanjude
of-line whitespace, remove excessive whitespace and blank lines, remove
dead code, follow our standard style for function definitions, and
correct grammatical and factual errors in some of the comments.
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
It turns out the /next/ dragonflybsd git actually uses the scan channel list,
so just kick this along to make the next commit easier.
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
From the original commit:
==
* Actually look at the first channel in the list. If it's a 2.4GHz channel,
set IWM_PHY_BAND_24 flag. The IWM_PHY_BAND_5 flag is 0 anyway, so we
don't need to look further.
* While there factor out the iwm_mvm_rrm_scan_needed() tlv capability check.
Taken-From: Linux iwlwifi
==
However, this only really does the latter. The sc_ic channel list isn't the
scan channel list, it's the /whole list/ for the set of active channels,
so I don't know what the right thing to do is here.
So I'll commit this as an intermediary commit and we'll have to revisit whether
to finish the refactor as-is.
Tested:
* Intel 7260, STA mode
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
- Deal with changes to port_type, and not just port_mod when a
transceiver is changed. This fixes hot swapping of transceivers of
different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or
SFP28 in a SFP28 port, etc.).
- Always refresh media information for ifconfig if the port is down.
The firmware does not generate tranceiver-change interrupts unless at
least one VI is enabled on the physical port. Before this change
ifconfig diplayed potentially stale information for ports that were
administratively down.
- Always recalculate and reapply L1 config on a transceiver change.
- Display PAUSE settings in ifconfig. The driver sysctls for this
continue to work as well.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
that start in 1970, assume most conversions are going to be for recent dates
and use a precomputed number of days through the end of 2016.
This is a do-over of r320997, hopefully this time with 100% more workiness.
The first attempt had an off-by-one error, but instead of just adding
another mysterious +1 adjustment, this rearranges the relationship between
recent_base_year and recent_base_days so that the latter is the number of
days that occurred before the start of the associated year (instead of the
count thru the end of that year). This makes the recent_base stuff work
more like the original loop logic that didn't need any +1 adjustments.
While there, appropriately handle the overhead depending on
the usage of DATA or I-DATA chunks. Take the overhead only
into account, when required.
Joint work with rrs@
MFC after: 1 week
this file. Previously, half of the pointers to a vm_page being used as
a page directory page were named "pdpg" and the rest were named "mpde".
Discussed with: kib
MFC after: 1 week
pmap_remove_ptes(). (This new function will also be used by an upcoming
change to pmap_enter() that adds support for psind == 1 mappings.)
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
MFC after: 1 week
This appears to have been an oversight in r213536.
Reviewed by: markj
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11521
the IO type (Admin or NVM) using XPT op-codes XPT_NVME_ADMIN or
XPT_NVME_IO.
Submitted by: Chuck Tuffli <chuck@tuffli.net>
Differential Revision: https://reviews.freebsd.org/D10247
Using the https://github.com/google/capsicum-test/ suite, the
PosixMqueue.CapModeForked test was failing due to an ECAPMODE after
calling kmq_notify(). On further inspection, the dynamically
loaded syscall entry was initialized with sy_flags zeroed out, since
SYSCALL_INIT_HELPER() left sysent.sy_flags with the default value.
Add a new helper SYSCALL{,32}_INIT_HELPER_F() which takes an
additional argument to specify the sy_flags value.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11576
Fix minor -Werror issues when building with gcc from -Wredundant-decls,
-Wunused, -Wbool-operations. Also ensure the M_IXL malloc type is only
defined once.
Reviewed by: efj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11414
This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.
Reviewed by: rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11573
From Brett:
In short, busdma maps for received packets were not being unloaded in the
interrupt handler before the packets were passed up the network stack. The fix
was to add a busdma sync and unload for the two receive maps.
This bug is significant for certain busdma providers, for example IOMMUs,
where not unloading the maps means that 1) the IOMMU mappings that allow the
NIC to DMA the received packets into host memory stay open indefinitely,
potentially violating a desired security policy, and 2) resources such as
device address space addresses and host memory for bookkeeping are never freed.
Without an IOMMU or bounce buffering enabled for the ixl device, I don't think
adding these calls will have any significant performance impact. With the
IOMMU enabled, I have noticed a performance impact on the receive side, which
is expected.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj@
MFC after: 1 week
Also add some checks for overflow to existing functions.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11533
Previously, GRE packets in IPv6 tunnels would be dropped by IPFW (unless
net.inet6.ip6.fw.deny_unknown_exthdrs was unset).
PR: 220640
Submitted by: Kun Xie <kxie@xiplink.com>
MFC after: 1 week
