Commit graph

12 commits

Author SHA1 Message Date
Toomas Soome
c9296b3227 loader: F_READ/F_WRITE should be checked against masked flag
The work to make it possible to avoid bcache via using F_NORA modifier did
miss the fact that not all loader platforms are using the bcache, and so
it is possible the modifier is not cleared, as bcache strategy function is
not used.

For fix, we make sure the checks are dont with masked flag.

This patch does fix boot for platforms which do not use bcache.

Reported by:	emaste
Reviewed by:	emaste
Differential Revision:	https://reviews.freebsd.org/D10422
2017-04-18 18:07:54 +00:00
Toomas Soome
b91aad35da loader: remove open_disk cache
As we provide the disk size verification and correction via disk_ioctl
and disk state provided by disk_open(), we can not share the partition
state in disk_devdesc structure. Also the sharing does make a lot of sense
with ufs, as only one partition is open at any given time, but zfs pools
do keep the disk devices open.

To make sure we do get the correct information about the open device,
just remove the cache.

Reviewed by:	allanjude, smh
Approved by:	allanjude (mentor)
Differential Revision:	https://reviews.freebsd.org/D9757
2017-03-16 12:04:43 +00:00
Toomas Soome
c12dbfe608 loader: Implement disk_ioctl() to support DIOCGSECTORSIZE and DIOCGMEDIASIZE.
Need interface to extract information about disk abstraction,
to read disk or partition size depending on the provided argument
and adjust disk size based on information in partition table.

The disk handle from disk_open() has d_offset field to point to
partition start. So we can use this fact to return either whole disk
size or partition size. For this we only need to record partition size
we get from disk_open() anyhow.

In addition, this will also make it possible to adjust the disk media size
based on information from partition table. The problem with disk size is
about some BIOS systems reporting bogus disk size for 2+TB disks, but
since such disks are using GPT partitioning, and GPT does have information
about disk size (alternate LBA + 1), we can use this fact to record disk
size based on partition table.

This patch does exactly this: implements DIOCGSECTORSIZE and DIOCGMEDIASIZE
ioctl, and DIOCGMEDIASIZE will report either disk media size or partition size.

Adds ptable_getsize() call to read partition size in bytes from ptable pointer.
Updates disk_open() to use ptable_getsize() to update mediasize value.

Implements GPT detection function to update ptable size (used by
ptable_getsize()) according to alternate lba (which is location of backup copy
of GPT header table).

Reviewed by:	allanjude
Approved by:	allanjude (mentor)
Differential Revision:	https://reviews.freebsd.org/D8594
2017-02-06 08:26:45 +00:00
Toomas Soome
151139ad9e loader: disk/part api needs to use uint64_t offsets
The disk_* and part_* api is using 64bit values for media size and
offsets. However, the current api is using off_t type, which is signed
64-bit int.

In this context the signed media size does not make any sense, and
the offsets are used to mark absolute, not relative locations.

Also, the data from GPT partition table and some other sources is
already using uint64_t data type, so using signed off_t can cause sign
issues.

Reviewed by:	imp
Approved by:	imp (mentor)
Differential Revision:	https://reviews.freebsd.org/D8710
2017-02-01 20:10:56 +00:00
Toomas Soome
1ecc859193 dosfs support in libstand is broken since r298230
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.

This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.

The analysis of the issue and the backout patch is provided by Mikhail Kupchik.

PR:		214423
Submitted by:	Mikhail Kupchik
Reported by:	Mikhail Kupchik
Reviewed by:	bapt, allanjude
Approved by:	allanjude (mentor)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D8644
2016-12-30 19:06:29 +00:00
Toomas Soome
77d81a4dab lsdev device name section headers should be printed by dv_print callback.
lsdev command does walk over devsw list, prints list element name and
will use dv_print() callback to print the device list.
Unfortunately this approach will add unneeded noise when there are no
particular devices detected.

To remove "empty" device section headers, the dv_print() callback
should print the header instead.

In addition, fixed dv_print callback for md module.

Reviewed by:	imp
Approved by:	imp (mentor)
Differential Revision:	https://reviews.freebsd.org/D8551
2016-11-19 08:54:21 +00:00
Toomas Soome
cbd6713146 Loader paged/pageable data is not always paged.
This change does modify devsw dv_print() to return the int value,
enabling walkers to interrupt the walk on non zero value from dv_print().

This will allow the pager_print actually to stop displaying data on
user input, and additionally pager is used in various *dev_print callbacks,
where it was missing.

For test, lsdev [-v] command should display data by screenfuls and should
stop when the key 'q' is pressed on pager prompt.

Reviewed by:	allanjude
Approved by:	allanjude (mentor)
Differential Revision:	https://reviews.freebsd.org/D5461
2016-11-08 06:50:18 +00:00
Allan Jude
87ed2b7f5a A new implementation of the loader block cache
The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.

Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.

Submitted by:	Toomas Soome <tsoome@me.com>
Reviewed by:	delphij (previous version), emaste (previous version)
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D4713
2016-04-18 23:09:22 +00:00
Zbigniew Bodek
bbcfaa4eb8 Implement simple ops for umass_disk
The initial IOCTL implementation supports reading disk physical
geometry.
Two additional functions were added. They allow reading/writing raw
data to the disk (default partition).

Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4143
2015-11-27 18:17:53 +00:00
Zbigniew Bodek
09a37b41c5 Do not zero memory in umass_detach
The detach function is called very often, for example from
get_capacity function. We don't want to loose any pointers
here, so disable detaching for umass driver.

Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4141
2015-11-27 18:16:10 +00:00
Hans Petter Selasky
70d843035e Export structure(s) properly.
Sponsored by:	DARPA, AFRL
2014-05-30 14:05:31 +00:00
Hans Petter Selasky
6eda7f75c1 Add support for USB mass storage to libusbboot.
Sponsored by:	DARPA, AFRL
2014-05-30 13:10:49 +00:00