vfs.zfs.min_auto_ashift is a sysctl only not a tunable so updated bsdinstall
to use the correct location /etc/sysctl.conf instead of /boot/loader.conf
Reported by: Aaron Caza
Reviewed by: allanjude
MFC after: 2 days
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D11278
- increase arm64 EFI partition to 200M, as x86
- use EFI_BOOTPART_SIZE and EFI_BOOTPART_PATH macros on x86
- increase ZFS EFI partition to 200M
PR: 201898
Reviewed by: allanjude, manu
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11239
If an encrypted install is attempted and fails for any reason, the disk
cannot be erased by the installer because the partition is in use by GELI
At the start of the installation process, all ZFS pools are exported and
all GELI instances are detached, to allow a restarted install to proceed
PR: 210814
Reported by: jonathan
MFC after: 10 days
The pools are exported and reimported in order to write the bootcode
This causes an error when the bootpool is later mounted by common code
The bootpool is now imported with the -N flag to prevent mounting
Reported by: Michael Dexter
MFC after: 5 days
A separate bootpool is used when the selected partition type is MBR
or when the disk is GELI encrypted and a UEFI loader is selected.
BIOS avoids the bootpool by using bootcode and loader that support GELI.
bsdinstall did not remount the bootpool after creating the main pool,
which caused an error when mkdir tried to create /boot/zfs
PR: 210717
Approved by: re (gjb)
Sponsored by: ScaleEngine Inc.
Fix an error where vfs.root.mountfrom was not always set as required
when creating a bootpool. After the recent geliboot changes, it was only
set if the main pool was encrypted.
Also resolve an error where the bootpool was unmounted twice causing
bsdinstall to stop with an error message about the failed command.
Approved by: re (gjb)
Sponsored by: BSDCan Hacker Lounge
Do not set canmount=noauto on the boot environment at create time, because
this causes / to not be mounted, and since the chroot is read only, new
mountpoints cannot be created.
The property is set later, when other properties are adjusted
Reported by: HardenedBSD
Sponsored by: ScaleEngine Inc.
In this configuration, a separate bootpool is not required.
This allows ZFS Boot Environments to be used with GELI encrypted ZFS pools.
Support for GPT+EFI+GELI is planned for the future.
Tested by: Joseph Mingrone, HardenedBSD
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5869
The root file system is mounted early via vfs.root.mountfrom.
The canmount=noauto property only affects the zfs rc.d script.
This ensures that the 'default' BE is not mounted overtop of another BE when
one is selected from the beastie menu
Sponsored by: ScaleEngine Inc.
Installs both pmbr+gptzfsboot as well as boot1.efifat in separate partitions
The resulting system can be booted with either UEFI or BIOS/CSM.
Preference is controlled by the user's firmware boot settings.
This is now the default for zfsboot installs
PR: 208629
Submitted by: Galael LAPLANCHE <ganael.laplanche@corp.ovh.com> (original version)
If a user requested encrypted swap, but 0 sized, it would still be added to fstab
PR: 208630
Submitted by: Ganael LAPLANCHE <ganael.laplanche@corp.ovh.com>
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
If the bootpool does not start at the first sector of the BSD partition
then zfsldr seeks to the wrong offset inside the ZFS vdev label, and is
unable to find zfsboot, so the system does not boot
If 4k alignment is requested, align the BSD partition in the MBR table,
and align the swap and data pool, but the bootpool must start at sector 1
While here, if 4k alignment is requested, disable MBR CHS alignment, as
this results in not-4k aligned partitions.
Reported by: Alex Wilkinson
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
For Lenovo laptops with buggy bios (x220, t420, t520):
Write the 0xee entry into the second slot in the pmbr instead of the first
For some Dell and HP models:
The BIOS gives a warning message when booting in legacy mode from a GPT partitioned disk where the 0xee partition in the pmbr is not flagged active
For models known to have this problem, mark the pmbr active during installation
Use smbios data to identify machines known to be affected by any of the above, and offer the user the option to apply the workaround
In bsdinstall's ufs auto mode (autopart partition wizard):
Allow users to select which type of partition table to use
Keep current defaults: MBR for BIOS, GPT for UEFI
This allows users to choose GPT for legacy boot if they wish
PR: 184910
PR: 194359
Reviewed by: Michael Dexter
Approved by: marcel
MFC after: 3 days
X-MFC-With: r285594
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3091
A variable was misspelled resulting in chmod executing on the installer instead of on the target chroot
PR: 191402
Submitted by: Martin Simmons <martin@lispworks.com>
Approved by: brueffer
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3061
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: imp, kmoore
Discussed on: -current
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
Summary:
Add "GELI Passphrase:" prompt to boot loader.
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: (your name[s] here)
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
Test Plan:
Drop a head copy of check-password.4th into /boot and then apply the patch
(only the patch to /boot/check-password.4th is required; no other changes are
required but you do have to have a HEAD copy of check-password.4th to
apply the patch).
NB: The rest of your /boot files can be up to 2 years old but no older.
NB: The test won't work unless your kernel has the following change
https://svnweb.freebsd.org/base?view=revision&revision=273489
Now, put into /boot/loader.conf:
geom_eli_passphrase_prompt="YES"
and reboot.
You should be prompted for a GELI passphrase before the menu (if enabled),
just after loading loader.conf(5).
NB: It doesn't matter if you're using GELI or not. However if you are using
GELI and a sufficiently new enough release (has SVN r273489) and you entered
the proper passphrase to mount your GELI encrypted root device(s), you should
notice that the boot process did not stop (you went from loader all the way to login).
Reviewers: cperciva, allanjude, scottl, kmoore
Subscribers: jkh, imp
Differential Revision: https://reviews.freebsd.org/D2105
Previously we used gnop(8) to fake 4K sector size disks but ZFS now has a
sysctl to control this when creating new top level vdev's so use that
instead.
Differential Revision: D566
MFC after: 1 month
Sponsored by: Multiplay
ZFS property canmount=off so that /var/db/pkg and other such directories
are part of the / dataset, and only /var/mail, /var/log, and /var/crash
are excluded from the ZFS boot environment (beadm).
PR: 193971
Approved by: jmg
MFC after: ASAP
Relnotes: yes
Sponsored by: ScaleEngine Inc.
an embedded newline appearing within the options string surrounded by
double-quotes. Rework the logic that goes into setting dataset options on
the root pool dataset while we're here -- added two new variables (which
can be altered via scripting) ZFSBOOT_POOL_CREATE_OPTIONS and also
ZFSBOOT_BOOT_POOL_CREATE_OPTIONS for setting pool/dataset attributes at
the time of pool creation. The former is for setting options on the root
pool (zroot) and the latter is for setting options on the optional separate
boot pool (bootpool) implicitly enabled when using either GELI or MBR. The
default value for the root pool variable (ZFSBOOT_POOL_CREATE_OPTIONS) is
"-O compress=lz4 -O atime=off" and the default value for separate boot pool
variable (ZFSBOOT_BOOT_POOL_CREATE_OPTIONS) is NULL (no additional options
for the separate boot pool dataset).
Reviewed by: allanjude
MFC after: 7 days
X-MFC-with: r266107-266109
It starts off being used to track the grammar for the number of disks
(singular vs plural) and then it is reused as the list of available disks.
Replace the variable with disks_grammar and move 'disk' and 'disks' to
msg_ vars so they can be translated in the future.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Set compress=lz4 for the entire pool, removing it from the individual
datasets
Remove exec=no from /usr/src, breaks the test suite.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
encryption for swap, and optional gmirror for swap (which can be combined)
Submitted by: Allan Jude <freebsd@allanjude.com>
Requested By: roberto
Sponsored By: ScaleEngine Inc.
MFC after: 2 weeks
GEOM support (thereby adding GEOM support to the disk selection
menu of bsdinstall(8)'s `zfsboot' module updated herein).
MFC after: 1 week
X-MFC-with: 264840
that the slightly older dialog(1) requires --separate-output when using the
--checklist widget to force response to produce unquoted values (whereas in
stable/10 --checklist widget without --separate-output will only quote the
checklist labels in the response if the label is multi-word (contains any
whitespace).
Since these enhancements (see revisions 263956 and 264437) were developed
originally on 10, the --separate-output option was omitted. When merged to
stable/9, we (Allan Jude) and I found during testing that the "always-
quoting" of the response was causing things like struct interpolation to
fail (`f_struct device_$dev' would produce `f_struct device_\"da0\"' for
example -- literal quotes inherited from dialog(1) --checklist response).
To see the behavior, execute the following on stable/9 versus stable/10:
dialog --checklist disks: 0 0 0 da0 "" off da1 "" off
Check both items and hit enter. On stable/10, the response is:
da0 da1
On stable/9 the response is:
"da0" "da1"
If you use the --separate-output option, the response is the same for both:
da0
da1
So applying --separate-output on every platform until either one of two
things occurs 1) dialog(1,3) gets synchronized between stable/9, higher or
2) we drop support for stable/9.
MFC after: 3 days
Reviewed by: Allan Jude
