With clang 15, the following -Werror warning is produced:
sys/dev/vt/vt_core.c:2129:15: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
vt_mouse_paste()
^
void
This is because vt_mouse_paste() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/netmap/if_re_netmap.h:179:8: error: variable 'n' set but not used [-Werror,-Wunused-but-set-variable]
u_int n;
^
The 'n' variable appears to have been a debugging aid that has never
been used for anything, so remove it.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
In file included from sys/dev/pms/freebsd/driver/ini/src/agtiapi.c:70:
sys/dev/pms/RefTisa/tisa/sassata/common/tdsatypes.h:346:13: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
volatile NvmdResponseSet;
~~~~~~~~ ^
int
The NvmdResponseSet member is effectively only used as a boolean in the
pms(4) driver, so it could be a single bit. But to avoid changing the
semantics at all in this unmaintained driver, simply declare it as a
volatile int.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/dev/hwpmc/hwpmc_mod.c:4805:6: error: variable 'nfree' set but not used [-Werror,-Wunused-but-set-variable]
int nfree;
^
sys/dev/hwpmc/hwpmc_mod.c:4804:6: error: variable 'ncallchains' set but not used [-Werror,-Wunused-but-set-variable]
int ncallchains;
^
The 'nfree' and 'ncallchains' variables were used in KASSERTs, but these
were removed due to refactoring in d9f1b8dbf2. Remove the variables
since they no longer serve any purpose.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/hwpmc/hwpmc_mod.c:2462:33: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
pmc_thread_descriptor_pool_drain()
^
void
This is because pmc_thread_descriptor_pool_drain() is declared with a
(void) argument list, but defined with an empty argument list. Make the
definition match the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/hwpmc/hwpmc_x86.c:245:18: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
pcm_md_initialize()
^
void
This is because pcm_md_initialize() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/dev/hwpmc/hwpmc_logging.c:1228:18: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
pmclog_initialize()
^
void
sys/dev/hwpmc/hwpmc_logging.c:1277:16: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
pmclog_shutdown()
^
void
This is because pcmlog_{initialize,shutdown}() are declared with (void)
argument lists, but defined with empty argument lists. Make the
definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/firewire/fwohci.c:2762:23: error: variable 'pcnt' set but not used [-Werror,-Wunused-but-set-variable]
int len, plen, hlen, pcnt, offset;
^
The 'pcnt' variable is eventually used only in an #if 0'd block,
obviously meant for debugging. Ensure that 'pcnt' is only declared and
used when COUNT_PACKETS is defined, so the debugging can be easily
turned on later, if desired.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/ocs_fc/ocs_cam.c:2556:11: error: variable 'count' set but not used [-Werror,-Wunused-but-set-variable]
uint32_t count;
^
The 'count' variable seems to be a left-over from some debugging code
that no longer exists, and can be removed without any functional change.
MFC after: 3 days
In the extremely unlikely case that the iommu_gas_map_region() call in
bus_dma_iommu_load_ident() failed, we would attempt to unmap the failed
entry twice, first in iommu_gas_map_region(), and a second time in the
caller. Once is enough, and twice is problematic because it leads to a
second RB_REMOVE call on the same tree node. Like it or not, RB_TREE
does not handle that possibility.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35869
With clang 15, the following -Werror warning is produced:
sys/dev/alc/if_alc.c:3441:6: error: variable 'prog' set but not used [-Werror,-Wunused-but-set-variable]
int prog;
^
The 'prog' variable seems to be a left-over from some debugging code
that no longer exists, and can be removed without any functional change.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35831
With clang 15, the following -Werror warnings are produced:
sys/dev/nvd/nvd.c:150:9: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
nvd_load()
^
void
sys/dev/nvd/nvd.c:166:11: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
nvd_unload()
^
void
This is because nvd_load() and nvd_unload() are declared with a (void)
argument list, but defined with an empty argument list. Make the
definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/mwl/if_mwl.c:3445:8: error: variable 'ix' set but not used [-Werror,-Wunused-but-set-variable]
u_int ix;
^
Here, 'ix' is a variable that is only used when debugging. Mark the
variable as potentially unused, to suppress the warning.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/dev/mfi/mfi.c:3698:6: error: variable 'timedout' set but not used [-Werror,-Wunused-but-set-variable]
int timedout;
^
sys/dev/mfi/mfi.c:3742:6: error: variable 'timedout' set but not used [-Werror,-Wunused-but-set-variable]
int timedout = 0;
^
Here, 'timedout' are variables that are only used when debugging,
requiring #if 0 statements to be modified. Mark the variables as
potentially unused, to suppress the warnings.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/malo/if_malo.c:1573:8: error: variable 'ix' set but not used [-Werror,-Wunused-but-set-variable]
u_int ix;
^
Here, 'ix' is a variable that is only used when MALO_DEBUG is defined.
Mark the variable as potentially unused, to suppress the warning.
MFC after: 3 days
We periodically ingest entropy from pollable entropy sources, but only
8 bytes at a time and only occasionally enough to feed all of Fortuna's
pools once per second. This can result in Fortuna remaining unseeded
for a nontrivial amount of time when there is no entropy passed in from
the boot loader, even if RDRAND is available to quickly provide a large
amount of entropy.
Detect in random_sources_feed if we are not yet seeded, and increase the
amount of immediate entropy harvesting we perform, in order to "fill"
Fortuna's entropy pools and avoid having
random: randomdev_wait_until_seeded unblock wait
stall the boot process when entropy is available.
This speeds up the FreeBSD boot in the Firecracker VM by 2.3 seconds.
Approved by: csprng (delphij)
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D35802
The Korean keyboard has two keys, the Korean/Chinese and the
Korean/English toggles, that generate scancodes 0xF1 and 0xF2
(respectively) when pressed, and nothing when released. They do not
repeat.
As Hanyong/Hancha keys are generally greater than 0x80, which is
generally considered a release key, add extra preceding press key event
to generate press/release pair.
Swap Hanyong/Hancha key codes to match reality.
Reported by: Warioburn <warioburn@yahoo.co.jp>
PR: 265260
MFC after: 1 week
With clang 15, the following -Werror warnings is produced:
sys/dev/fb/fbd.c:205:9: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
fbd_list()
^
void
This is because fbd_list() is declared with a (void) argument list, but
defined with an empty argument list. Make the definition match the
declaration.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/dev/cxgbe/t4_tracer.c:234:18: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
t4_tracer_modload()
^
void
sys/dev/cxgbe/t4_tracer.c:243:20: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
t4_tracer_modunload()
^
void
This is because t4_tracer_modload() and t4_tracer_modunload() are
declared with a (void) argument list, but defined with an empty argument
list. Make the definitions match the declarations.
MFC after: 3 days
U+276E Heavy Left-Pointing Angle Quotation Mark Ornament
U+276F Heavy Right-Pointing Angle Quotation Mark Ornament
U+276F is used by zprezto (zsh config package).
For the normal font I used the bold font glyphs for U+003C < and
U+003E >. The bold font glyphs are new.
PR: 232494
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
As in the past Dimitar Zhekov provided a copy of Terminus under a BSD
license for use by our console.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is not completely exhaustive, but covers a large majority of
commands in the tree.
Reviewed by: markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35583
debugnet provides the network stack for netgdb and netdump. Since it
must operate under panic/debugger conditions and can't rely on dynamic
memory allocation, it preallocates mbufs during boot or network
configuration. At that time, it does not yet know which interface
will be used for debugging, so it does not know the required size and
quantity of mbufs to allocate. It takes the worst-case approach by
calculating its requirements from the largest MTU and largest number
of receive queues across all interfaces that support debugnet.
Unfortunately, the bge NIC driver told debugnet that it supports 1,024
receive queues. It actually supports only 2 queues (with 1,024 slots,
thus the error). This greatly exaggerated debugnet's preallocation,
so with an MTU of 9000 on any interface, it allocated 600 MB of memory.
A tiny fraction of this memory would be used if netgdb or netdump were
invoked; the rest is completely wasted.
Reviewed by: markj, rlibby
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D35845
Clang 15 warns:
sys/dev/cxgbe/cudbg/cudbg_lib.c:2949:6: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
int i = 0;
^
Apparently 'i' was meant as the current retry counter, but '1' was used
in the while loop comparison instead, making the loop potentially
infinite, if 'busy' never gets reset.
MFC after: 3 days
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D35834
Clang 15 warns:
sys/dev/cxgb/cxgb_sge.c:1290:21: error: variable 'txsd' set but not used [-Werror,-Wunused-but-set-variable]
struct tx_sw_desc *txsd = &txq->sdesc[txqs->pidx];
^
It appears 'txsd' is a leftover from a previous refactoring (see
3f345a5d09), but is no longer used for anything, and can be removed
without any functional change.
MFC after: 3 days
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D35833
With clang 15, the following -Werror warning is produced:
sys/dev/agp/agp.c:910:16: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
agp_find_device()
^
void
This is because agp_find_device() is declared with a (void) argument
list, and defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
Eliminate the unroll_entry field from struct iommu_map_entry, shrinking
the struct by 16 bytes on 64-bit architectures.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35769
On x86 systems, the debug.late_console tunable makes it possible to set
up the console before we call pmap_bootstrap. (The tunable is turned
on by default; setting late_console=0 results in consoles being probed
early.)
Unfortunately this is not compatible with using the ACPI SPCR table to
find the console, since consulting ACPI tables requires mapping memory
addresses. As such, we skip the call to uart_cpu_acpi_spcr from
uart_cpu_x86 in the !late_console case.
Reviewed by: imp
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D35794
The hw and ifp of a vsi will be NULL if such ixl_vsi is allocated
for a VF. When ixl_reconfigure_filters called, it is trying to
access vsi->ifp and hw->mac.addr and therefore is casuing panic.
This commit add checks to determine if vsi is a VF by checking
if vsi->hw is NULL, before adding IXL_VLAN_ANY filter (which
is already in a VF vsi's filter list) and VLAN filters.
(erj's Note: The SR-IOV flows need revisiting; this will help
prevent panics for now)
Reviewed by: krzysztof.galazka@intel.com, erj@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35649
This is in preparation for removal of OBJT_DEFAULT. In particular, it
is now cheap to check whether an OBJT_SWAP object has any swap blocks
allocated, so the benefit of having a separate OBJT_DEFAULT type is
quite marginal, and the OBJT_DEFAULT->SWAP transition is a source of
bugs.
Reviewed by: alc, hselasky, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35779
Merge lowermatch and uppermatch into find_space. Eliminate uppermatch
recursion. Merge match_insert into match_one and eliminate some
redundant calculation. Move some initialization out of find_space and
into map (and out from under a lock).
Reviewed by: kib (previous version), alc
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D35440
The original interface created by wtap is named "wlan%d", which is the
same as the name of the vap created by wlan(4) and cause ifconfig(8)
may output like this:
wlan0:
parent interface: wlan0
Rename the interface created by wtap(4) to "wtap%d" to avoid confusing.
Reviewed by: adrian
Sponsored by: Google, Inc. (GSoC 2022)
Differential Revision: https://reviews.freebsd.org/D35751
18db96dbfd introduced a use-after-free bug
in the error handling of the IPMICTL_RECEIVE_MSG ioctl.
Reported by: Coverity (CID 1490456) (via vangyzen)
Differential Revision: https://reviews.freebsd.org/D35605
New functions take lock and give lock after operation.
Removed locking and unlocking within other methods,
to prevent from recursive locking on non recursive lock.
Tested on EspressoBin.
Reviewed by: mw
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D35656
Minor version update which improves styling of a printouts, fixes
the KASAN and KMSAN kernel builds and LLQ reconfiguration after the
device reset.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
After the device reset, the LLQ configuration descriptor wasn't passed
to the hardware. On a 6-generation AWS instances (like C6gn), it is
required to pass the LLQ descriptor after the device reset, otherwise
the hardware will be missing the LLQ configuration resulting in
performance degradation.
This patch reconfigures the LLQ each time the ena_device_init() is
called. This means that the LLQ descriptor will be passed during the
initial configuration and after a reset.
The ena_map_llq_mem_bar() function call was moved before the
ena_device_init() call, to make sure that the mem bar is available.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In most places, the req_id is printed first, and the qid is printed as a
second. To align the driver, one printout was reworked and the print
order of those variables was changed.
Suggested by: rpokala
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Split the current FDT-only implementation up into an FDT and an
ACPI part reusing and sharing as much code as possible (thanks mw!).
This makes the Synopsis XHCI root hubs attach correctly on SolidRun's
HoenyComb instead of just the generic XHCI root and this means we
are also doing proper chip setup and applying the quirk needed there [1].
There is one problem with ACPI attachment in that it uses the generic
XHCI PNP ID. So we need to do extra checks in order to not claim
all xhci, which means we check for a known quirk to be present
in acpi_probe. Long term this isn't scaling and this was discussed
in SolidRun's Discord Channel in 2021 with the intend that "jnettlet"
will take this to a steering committee. Since then ACPI has kind-of
become a technology non grata (due to not getting changes into Linux
timely) so it is unclear if this will ever happen. If there will be
further hardware with dwc3/ACPI we should go and make sure this problem
gets solved.
[1] 24698f90b7/Silicon/NXP/LX2160A/AcpiTables/Dsdt/Usb.asl
Reviewed by: manu, mw
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D32256
Some command definitions were forced to use DB_FUNC in order to specify
their required flags, CS_OWN or CS_MORE. Use the new macros to simplify
these.
Reviewed by: markj, jhb
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35582
During the review of 09cdf4878c we
switched from cached registers to reading them as needed.
One read of the two reads was moved after the softreset got triggered
and as a result returned 0 rather than the proper register value.
Moving the read before the softreset gets initiated seems to make
things work again and xhci.c no longer complains about
"Controller does not support 4K page size.".
MFC after: 10 days
X-MFC with: 09cdf4878c
Pointy hat to: bz
The two implementations for the pca9548 switch and the pca9547 mux
seemed close enough so we can put them together and with a bit more
abstraction add pca9540 support.
While here apply a bit of consistency in variable and driver naming and
use device_has_property instead of the FDT-only OF_ variant.
This disconnects pca9547 from the build but does not yet delete it.
MFC after: 2 weeks
Reviewed by: mmel (earlier version), avg
Differential Revision: https://reviews.freebsd.org/D35701
rman_fini assumes rman_init has been called successfully. Clean up
init faulure by only calling rman_fini when rman_init has succeeded.
While here add ofw_pcib_fini that can be used by a sub-class to clean
up.
Reviewed by: bz, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35681
When accessing a register directly from etherswitchcfg one must specify
a register group(e.g. registers of portN) and the register offset within
the group. The latter is passed as the 5 least significant bits.
Extract the former by dividing the register address by 32, not by 5.
Approved by: mw(mentor)
Obtained from: Semihalf
Sponsored by: Stormshield
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35672
