Move legacy privilege masks near to their only user.
Move Huntington definitions to the top of hunt_impl.h to prepare
for moving the remaining EF10 definitions to ef10_impl.h.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6343
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6342
* Add the siba bus phy/mac/bandwidth clock definitions (TGSLOW*)
* Add the PHY-N register gateway (BWN_PHY_N())
* Add the PHY-N TX phystat1 register - we need to actually fill out
more of the PHY encoding information when we assemble a frame.
* Various ancillary stuff
Nothing uses this yet, but I do have CCK/OFDM somewhat working
in 2GHz mode on a PHY-N device.
Obtained from: b43 (definitions)
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
queue was ignored.
- Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Fixed 40G link failures with some switches when auto-negotiation enabled.
- Fixed to improve on link bring-up time.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where bogus d3hot bits were set causing traffic stall.
- Fixed an issue where sometimes adapter was not seen after reboot.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
- Fixed an issue where link failed to come up after removing twinax cable and
inserting optical module.
ETH
- Fixed a link flap issue on T580-CR.
OFLD
- Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.
FOiSCSI
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
use given inerface.
- Fixed an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
- Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
settings.(DCBX IEEE)
- Fixed an issue where app priority values are not handled correctly in fw.
(DCBX IEEE)
- Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added new interface to program DCA settings in SGE contexts; allow 32-byte
IQE size
- Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
OFLD:
- WR opcode is returned to host in cqe error response.
22.2. T4 Firmware
+++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
was ignored.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
FOiSCSI:
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
use given inerface.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
- Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)
FOiSCSI
- Fixes an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================
Obtained from: Chelsio Communications
MFC after: 6 weeks
Relnotes: yes
Sponsored by: Chelsio Communications
NOTE:
The FreeBSD system currently restricts the MAX IO size to MAXPHYS which
in turn is 128KB. We tested the 1MB IO by converting the MAXPHYS to 1MB.
Following is the mail reference:
http://lists.freebsd.org/pipermail/freebsd-scsi/2015-January/006568.html
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: AVAGO Technologies
JBODs. Driver has to sync the JBOD map with firmware and use sequence number
as a reference for JBOD FastPath I/O's.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: AVAGO Technologies
which leads to end being before start and thus a signed extended very large
number of size later on, which kva_alloc() will fail upon and we will panic.
Add the missing call.
Debugged with: andrew
Reviewed by: br, andrew
Sponsored by: DARPA/AFRL
Found: while using virtio with gem5
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6337
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Falcon support has been removed, so this code only supports Siena.
Reviewed by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
It's the same on Medford as Huntington.
Multicast chaining is not always on, even with Medford, as it's not
supported by low latency firmware.
Unlike the Linux driver, we don't need to support virtulization with
firmware released before support for multicast chaining was added.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6319
With multicast chaining, if e.g. a specific multicast filter is
inserted and the multicast mis-match filter is then inserted, both may
match a packet and cause it to be delivered.
Copy the behaviour of the Linux driver, which is to remove the old filters
first, on the basis that customers are more likely to be able to handle
drops than duplicates (see bug49178 comment 4).
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6331
the driver here, so it shouldn't be accessed, let alone written to. Remove
the nearby debug line, it's the only thing that depended on the softc, and
it depended on it in a way that couldn't work in this part of the code.
This fixes some reports of use-after-free and system instability with
DEBUG_MEMGUARD enabled.
Submitted by: Matthew Macy
MFC after: 3 days
Add gpiobus_release_pin as a counterpart for gpiobus_map_pin. Without it
it's impossible to properly release pin so if kernel module is reloaded
it can't re-use pins again
Changes:
Kevin Scott i40e-shared: Save off VSI resource count when updating VSI
Anjali Singhai Jain i40e-shared: Expose some registers to program parser, FD and RSS logic
Eric Joyner ixl: Fix errors in queue interrupt setup in MSIX mode.
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Shannon Nelson i40e-shared: don't use AQ calls from clear_hw
Eric Joyner ixl: Use rx ctl read/write functions instead of register accesses in certain places.
Shannon Nelson i40e-shared: add adminq commands for rx ctl registers
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Jeremiah Kyle i40e-shared: Corrected function name in comment block
Deepthi Kavalur i40e-shared: correcting a HW capability display info
Shannon Nelson i40e-shared: fixups for (Linux) upstream consistency
Eric Joyner ixl: Only stop firmware's LLDP agent on older firmware versions.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Fix compile error when IXL_DEBUG is defined.
Eric Joyner ixl: Fix taskqueues created in init() not being freed in stop().
Eric Joyner ixl: Add additional debug sysctls, for Tx and Rx queue stats.
Eric Joyner ixl: Enable dynamic itr by default.
Eric Joyner ixl: Edit spacing, comments, function signatures (to conform to style(9)).
Eric Joyner ixl: Check for errors when tearing down msix interrupts.
Eric Joyner ixl: Remove unnecessary register reads/writes.
Eric Joyner ixl: Remove admin queue interrupt enable from general interrupt enable.
Eric Joyner ixl: Update switch config after teardown/reset flow in init().
Eric Joyner ixl: Add additional admin queue error code output to admin queue call errors.
Eric Joyner ixl: Don't destroy i40e spinlock if it's already uninitialized.
Shannon Nelson i40e-shared: clean event descriptor before use
Anjali Singhai Jain i40e-shared: When in promisc mode apply promisc mode to Tx Traffic as well
Kevin Scott i40e_shared: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit
Eric Joyner ixlv: Fix IXL_DEBUG compile issue.
Eric Joyner ixlv: Attempt to fix panic/other issues when rapidly unloading/loading driver.
Eric Joyner ixl/ixlv: Revert m_collapse() in ixl_xmit() to m_defrag().
Deepthi Kavalur i40e_shared: Trace logging HW capabilities
Eric Joyner ixlv: Correctly unlock/relock around init() call in vc_completion().
Eric Joyner ixl: Stop preventing changing flow control mode for CR4 media.
Eric Joyner ixl: Set IPv6 TCP offload flag when doing TSO.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Add more error messages/checks to ixl_vsi_assign_msix().
Eric Joyner ixl/ixlv: Clarify a comment about descriptors.
Eric Joyner ixl/ixlv: Improve i40e_debug() implementation.
Eric Joyner ixl/ixlv: Remove unused ASSERT() macro; move struct around.
Eric Joyner ixl: Set initial advertised speed value in init_locked().
Eric Joyner ixl: Fix flow control sysctl value being stored when new value is invalid.
Eric Joyner Edit comments and spacing.
Carolyn Wyborny i40e-shared: Add functions to blink led on Coppervale PHY
Eric Joyner ixl: Re-do interrupt setup.
Eric Joyner ixl: Remove VFLR task setup from legacy flow.
Eric Joyner ixl: Shutdown/setup HMC when handling an EMPR reset.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Kiran Patil i40e-shared: APIs to Add/remove port mirroring rules
Shannon Nelson i40e-shared: add VEB stat control and remove L2 cloud filter
Eric Joyner ixl: Update NVM version information shown.
Eric Joyner ixl: Remove empty else block.
Eric Joyner ixl: Slightly re-work ixl_init_msix().
Eric Joyner ixl: Remove duplicate queue enablement.
Shannon Nelson i40e-shared: implement the API function for aq_set_switch_config
Eric Joyner ixl: Update nvm version string shown in sysctl.
Eric Joyner ixl/ixlv: Changes to PF/VF minor version checking/handling.
Eric Joyner ixlv: Reduce maximum wait time for responses to VF AQ messages.
Eric Joyner ixl/ixlv: Edit comments, comment out code, and edit spacing.
Eric Joyner ixl: Print log message when SR-IOV init is successful.
Eric Joyner ixl: Add Tx Flow Control filter from main PF VSI.
Eric Joyner ixlv: Add extra error message when ixlv_get_vf_config times out.
Eric Joyner ixl: Assign current MOCS optics the XLPPI media type.
Eric Joyner ixl: Remove conditional wait after link status event.
Eric Joyner ixl: Add line break and remove extraneous return statement.
Eric Joyner ixl: Allow 40G speeds in the advertise_speed sysctl.
Eric Joyner ixl: Add "CRC enable" field to link_status sysctl output.
Eric Joyner ixl: Move sbuf.h include out of IXL_DEBUG* defines.
Eric Joyner ixl: Move remaining debug sysctl funcs to IXL_DEBUG_SYSCTL define.
Eric Joyner ixl: Add cases for all remaining media types in shared code to media_status().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Shannon Nelson i40e-shared: set shared bit for multicast filters
Piotr Raczynski i40e-shared: Bump AQ minor version for FVL/FPK
Eric Joyner ixl: Remove call to i40e_aq_set_mac_config() in init path.
Eric Joyner ixl: Always add interface mac address to driver+hw filter list.
Eric Joyner ixl: Edit comments.
Eric Joyner ixl: Add more descriptive sysctl help messages.
Eric Joyner ixl: Report more info in link_status sysctl.
Eric Joyner ixl: Flip set_aq_phy_int_mask mask bits.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return.
Eric Joyner ixl: Print message when hardware sends GRST interrupt.
Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue.
Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs.
Eric Joyner ixl: Fix spaces in a couple messages.
Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES.
Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code
Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct
Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type
Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct
Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters
Shannon Nelson i40e-shared: AQ Add set_switch_config
Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands
Shannon Nelson i40e-shared: AQ thermal sensor control struct
Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features
Shannon Nelson i40e-shared: add a little more to an NVM update debug message
Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem
Eric Joyner i40e-shared: Add prototypes for private NVM write functions
Eric Joyner ixl/ixlv: Remove unused define from ixl.h.
Eric Joyner ixl: Add handling of EMP reset for nvm update purposes.
Eric Joyner ixl: Move addition of device sysctls to separate function.
Eric Joyner ixl: Fix up a couple error messages in ixl_attach().
Eric Joyner ixl: Update the hardware resource allocation debug sysctl.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl: Remove HP device IDs.
Jesse Brandeburg i40e-shared: add small bit of debug
Mitch Williams i40e-shared: check for stopped admin queue
Mitch Williams i40e-shared: set aq count after memory allocation
Jesse Brandeburg i40e-shared: remove forever unused ID
Eric Joyner ixl: Fix bug where RSS does not hash to more than 16 queues.
Shannon Nelson i40e-shared: define function capabilities in only one place
Eric Joyner ixl: Change spacing, comments, and a single error message.
Eric Joyner ixl: Save admin queue phy interrupt mask as a define.
Eric Joyner ixl: Move callout_reset() to later in init_locked(), and stop clearing OACTIVE in driver flags.
Eric Joyner ixl: Add new reset+build flow to init() if it detects that the admin queue is stopped.
Eric Joyner ixl: Return EACCES instead of EPERM when an nvmupdate command fails.
Eric Joyner ixl: Remove KX_A device ID.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Helin Zhang i40e_shared: Fix compilation error - pointer-arith
Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug
Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement
Jesse Brandeburg i40e-shared: remove useless assignments
Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames
Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib
Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command
Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define.
Eric Joyner ixl: Remove extra aq_get_link_info() call in attach().
Eric Joyner ixl: Modify a couple error messages in attach() to be more informative.
Eric Joyner ixl: Add i40e_get_link_status() call to init_locked().
Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop().
Eric Joyner ixl: Add extra comments around link ITR code.
Eric Joyner ixl: Attempt to enhance link event handling.
Eric Joyner ixl: Style, spacing, and comment changes.
Eric Joyner ixl: Add I40E_NVM_ACCESS definition.
Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver.
Eric Joyner ixl: Don't strip out nvm update support from the driver anymore.
Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
