Provide the following sysctl statistics in order to stay aligned with
the Linux driver:
* rx_ring.csum_good
* tx_ring.unmask_interrupt_num
Also rename the 'bad_csum' statistic name to 'csum_bad' for alignment.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In order to use `ena_global_lock` in sysctl context, it must be kept
outside the driver instance's software context, as sysctls can be called
before attach and after detach, leading to lock use before sx_init and
after sx_destroy otherwise.
Solve this issue by turning `ena_global_lock` into a file scope
variable, shared between all instances of the driver and associated
sysctl context, and in turn initialized/destroyed in dedicated
SYSINIT/SYSUNINIT functions.
As a side effect, this change also fixes existing race in the reset
routine, when simultaneously accessing sysctl exposed properties.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
If LLQ is being used, `ena_tx_ctx.meta_valid` must stay enabled. This
fixes netmap support on latest generation ENA HW and aligns it with the
core driver behavior.
As netmap doesn't support any csum offloads, the
`adapter->disable_meta_caching` value can be simply passed to the HW.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Delegate RSS related functionality into separate .c/.h files in
preparation for the full RSS support.
While at it, reorder functions and remove prototypes for ones with
internal linkage.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
ENA silently assumed that ena_up, ena_down and ena_start_xmit routines
should be called within locked context. Driver's logic heavily assumes
on concurrent access to those routines, so for safety and better
documentation about this assumption, the locking assertions were added
to the above functions.
The assertion was added only for the main steps (skipping the helper
functions) which can be called from multiple places including the kernel
and the driver itself.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Stay aligned with the Linux driver by adding the following logs:
* inform the user about retrying queue creation
* warn on non-empty ena_tx_buffer.mbuf prior to ena_tx_map_mbuf
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Check for ENA_FLAG_TRIGGER_RESET inside a locked context in order to
avoid potential race conditions with ena_destroy_device. This aligns the
reset task logic with the Linux driver.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
All ena_com_prepare_tx errors other than ENA_COM_NO_MEM are fatal and
require device reset.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In case of Low-latency Queue, one small enough descriptor can be pushed
directly to the ENA hw, thus saving one fragment. Check for this
condition before performing collapse.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Since we take a lock when we enter the ioctl, we need to set driver_mtx
in the pps structure so it can be dropped while sleeping during a call
to timepps_fetch() with a non-zero timeout (PPS_CANWAIT feature).
MFC After: 5 days
Sponsored by: Netflix
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D31763
We can now set promisc and allmulti modes.
Filtering of given multicast addresses is not supported.
Changing the mode is done by sending a command described in:
"USB CDC Subclass Specification for Ethernet Devices v1.2, section 6.2.4".
This means that at least in theory this feature should work with all
modems that are using this driver.
This fixes Huawei E3372h-320 running new firmware in "HiLink" mode.
Previously it would reset a few seconds after its mode was changed
with "usb_modeswitch".
Setting RX filter to default value at the end of attach function
fixed that.
Sponsored by: Stormshield
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D31766
MFC after: 2 weeks
Reviewed by: hps
We do this when creating md(4) devices, in kern_mdattach_locked(), but
not when resizing the provider. Apply the same policy when resizing, as
many GEOM classes do not expect to deal with providers for which
pp->mediasize % pp->sectorsize != 0.
Reported by: syzkaller
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
If we can't allocate more MSI-X vectors, accept using single shared.
If we can't allocate any MSI-X, try to allocate 2 MSI vectors, but
accept single shared. If still no luck, fall back to shared INTx.
This provides maximal flexibility in some limited scenarios. For
example, vmd(4) does not support INTx and can handle only limited
number of MSI/MSI-X vectors without sharing.
MFC after: 1 week
After switching the dongle to the Huawei alternate mode(modem mode)
with usb_modeswitch the serial interfaces had all of their ids set to
0xFF.
After modifying umodem to work with that it attached successfully and
I've managed to configure device with standard AT commands to get
internet connection.
After MTU is updated we might start using allocating RX buffers from different pool. (MJUM9BYTES vs MCLBYTES)
Because of that we need to update the RX buffer size in hardware.
Previously it was done only when the interface was up, which is incorrect since MTU can be changed at any time.
Differential revision: https://reviews.freebsd.org/D31724
Sponsored by: Stormshield
Obtained from: Semihalf
MFC after: 2 weeks
Reviewed by: wma
Set domain number to device unit.
Some boards have multiple RCs handled by different drivers,
this ensures that there are no collisions with ofw_pcib.
Obtained from: Semihalf
Reviewed by: wma
Differential revision: https://reviews.freebsd.org/D31508
These sysctls report the maximum data segment lengths supported by an
adapter. These are the values advertised to the remote end during the
login phase.
Sponsored by: Chelsio Communications
This is used for the on-board flash on the HiFive Unmatched board.
Reviewed by: #riscv, jrtc27
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31562
This avoids exceeding a limit in the firmware when using ISO with
jumbo frames.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
These checks were inconsistently applied across the various hwpmc
classes. The condition is already checked by the generic code in
hwpmc_mod.c, so remove them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31388
It is always a good idea. In one case, attempting to allocate N+1 PMCs
from a class with N hardware counters would incorrectly attempt to
allocate from the next class in the list. Without this validation, this
can lead to all kinds of strange behaviour.
Since powerpc_allocate_pmc() is used by both the mpc7xxx and ppc970
classes, add a new global to track which is active (it will never be
both).
Reviewed by: luporl, ray
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31387
This allows one to be able to map the sglist entries passed into the
vq_ring_enqueue_segments() function to the segment indexes used in
the virtqueue.
This function normally gets inlined and may not available via FBT
probes.
Differential Revision: https://reviews.freebsd.org/D31620
When adjusting resources we should write updated window base/limit into
the registers. Without this newly added address range won't be routed
through the bridge properly.
Use MIN()/MAX() against current window base/limit to not shrink it on
the other side if the window is shared by several resources.
Align passed resource start/end to the set window granularity to keep
it properly aligned. Currently this is mostly called by other bridges
having the same window alignment, but it may be change one day.
Reviewed by: jrtc27, jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D31693
Cannon and Comet Lake PCHs have their PMC hidden, so when reading
the ACPI Base Address fails, we assume a default value.
Obtained from: Semihalf
Sponsored by: Stormshield
In implicit mode assignment of slot number and tracking id is performed
automatically on each synchronization requested by device driver.
This is done with creation of intermediate buffer for multitouch events.
This buffer holds untracked events until synchronization is requested by
device driver. It is needed as touch assigment requires
knowledges of all touch positions pushed in current and previous reports.
MFC after: 2 weeks
Touch tracking is a process of assignment of unique trackingID to each
initiated contact on the surface. Keeping the trackingIDs persistent
across multitouch reports requires solving of so called Euclidian
Bipartite Matching problem.
This commit imports EBM-solver implementation based on Dinitz-Kronrod
algorithm to find minimum cost matching between contacts listed in two
consecutive reports.
Obtained from: OpenBSD
MFC after: 2 weeks
with using of unioned anonymous structure.
Access to the same data by using different members of union generally
works despite it is not supported by C specs.
Also add helper function to report entire slot state.
MFC after: 2 weeks
As fuzz has already been applied on multitouch event processing.
This allows to remove existing workaround for double fuzz procesing.
MFC after: 2 weeks
1. Move touch count reporting helpers to utils. They are not multitouch.
2. Use evdev_mt prefix for private multitouch support routines.
3. Use int instead of int32_t where fixed size is not required.
4. Export some internal functions.
This change should be no-op.
MFC after: 2 weeks
As is done in the target, require that DataSN values are consecutive
and in-order. If an out of order Data-In PDU is received, force a
session reconnect. In addition, when a SCSI Response PDU is received,
verify that the ExpDataSN field matches the count of Data-In PDUs
received for this command. If not, force a session reconnect.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D31594
This was an error, we cannot use sbuf_trim(9) in the
ixgbe_sbuf_fw_version function because it also gets called in
the context of sbuf_new_for_sysctl(9). sbuf(9) explains the interaction
with drain functions as used by sbuf_new_for_sysctl(9).
Reviewed by: imp
Fixes: 7660e4ea5c
MFC after: 1 day
Differential Revision: https://reviews.freebsd.org/D31633
Implement kernel support for RFC 5549/8950.
* Relax control plane restrictions and allow specifying IPv6 gateways
for IPv4 routes. This behavior is controlled by the
net.route.rib_route_ipv6_nexthop sysctl (on by default).
* Always pass final destination in ro->ro_dst in ip_forward().
* Use ro->ro_dst to exract packet family inside if_output() routines.
Consistently use RO_GET_FAMILY() macro to handle ro=NULL case.
* Pass extracted family to nd6_resolve() to get the LLE with proper encap.
It leverages recent lltable changes committed in c541bd368f.
Presence of the functionality can be checked using ipv4_rfc5549_support feature(3).
Example usage:
route add -net 192.0.0.0/24 -inet6 fe80::5054:ff:fe14:e319%vtnet0
Differential Revision: https://reviews.freebsd.org/D30398
MFC after: 2 weeks
