Use of compiler builtin ffs/ctz functions will result in optimized
instruction sequences when possible, and fall back to calling a function
provided by the compiler run-time library. We have slowly shifted our
platforms to take advantage of these builtins in 60645781d6 (arm64),
1c76d3a9fb (arm), 9e319462a0 (powerpc, partial).
Some platforms still rely on the libkern implementations of these
functions provided by libkern, namely riscv, powerpc (ffs*, flsll), and
i386 (ffsll and flsll). These routines are slow, as they perform a
linear search for the bit in question. Even on platforms lacking
dedicated bit-search instructions, such as riscv, the compiler library
will provide better-optimized routines, e.g. by using binary search.
Consolidate all definitions of these functions (whether currently using
builtins or not) to libkern.h. This should result in equivalent or
better performing routines in all cases.
One wart in all of this is the existing HAVE_INLINE_F*** macros, which
we use in a few places to conditionally avoid the slow libkern routines.
These aren't easily removed in one commit. For now, provide these
defines unconditionally, but marked for removal after subsequent
cleanup.
Removal of the now unused libkern routines will follow in the next
commit.
Reviewed by: dougm, imp (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40698
Add support for GPIO internal pull up/down configuration on RPi4 family.
BCM2711 SoC on 4th generation Raspberry Pi changed the way to configure
its GPIO pins' internal pull up/down resistors. NetBSD already have
support for this change, and port it to FreeBSD is trivial.
This patch, based on the NetBSD commit adds the appropriate method for
BCM2711 and now we can properly configure the GPIO pins' pull status.
PR: 256372
Reviewed by: mhorne
Obtained from: NetBSD bb88cfa64ad8
Pull Request: https://github.com/freebsd/freebsd-src/pull/746
The sysentvec sv_imgact_try was used by kern_exec() to allow
non-native ABI to fixup shell path according to ABI root directory.
Since the non-native ABI can now specify its root directory directly
to namei() via pwd_altroot() call this facility is not needed anymore.
Differential Revision: https://reviews.freebsd.org/D40092
MFC after: 2 month
The Barndinfo emul_path was used by the Elf image activator to fixup
interpreter file name according to ABI root directory. Since the
non-native ABI can now specify its root directory directly to namei()
via pwd_altroot() call this facility is not needed anymore.
Differential Revision: https://reviews.freebsd.org/D40091
MFC after: 2 month
This avoids bloating the kernel image when MAXCPU is large.
A follow-up patch for kgdb and other kernel debuggers is needed since
the stoppcbs symbol is now a pointer. Bump __FreeBSD_version so that
debuggers can use osreldate to figure out how to handle stoppcbs.
PR: 269572
MFC after: never
Reviewed by: mjg, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39806
After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
This existing helper function is preferable to the hand-rolled
calculation of the kstack bounds.
Make some small style improvements while here. Notably, rename every
instance of "r", the return address, to "ra". Tidy the includes in the
affected files.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39909
TI support is in a sad state for years.
We haven't been able to keep up with all the breaking changes that
upstream do in the DTS. This requires a lot of new drivers to handle the
new buses that they create and all the new clocks that they expose.
Keep the code for now in case somebody is interested in reviving this
platform but stop bloating GENERIC with code that don't work.
Reviewed by: imp, mmel
MFC after: never
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D39843
There is now assertion which requires all memory allocations of positive size.
Negative and zero-sized allocations lead to panic, so plug them off.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D39846
This was needed before INTRNG was in place and handling the push of
curthread->td_intr_frame. Since INTRNG now handles this, there is no
longer and need for playing around with the frame inside IPI interrupts.
This was needed when intr_ipi_dispatch() was called by hardware-specific
IPI interrupt routines which didn't save the trap frame. Now all ARM
interrupts pass through INTRNG which will have already saved the trap
frame and disabled preemption.
Remove the conditional trapframe/argument passing to the handlers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37938
When vm_map_remove() is called from vm_swapout_map_deactivate_pages()
due to swapout, PKRU attributes for the removed range must be kept
intact. Provide a variant of pmap_remove(), pmap_map_delete(), to
allow pmap to distinguish between real removes of the UVA mappings
and any other internal removes, e.g. swapout.
For non-amd64, pmap_map_delete() is stubbed by define to pmap_remove().
Reported by: andrew
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D39556
NETLINK is going to replace rtsock and a number of other ioctl/sysctl interfaces.
In-base utilies such as route(8), netstat(8) and soon ifconfig(8)
are being converted to use netlink sockets as a transport between
kernel and userland.
In the current configuration, it still possible have the kernel
without NETLINK (`nooptions NETLINK`) and use the aforementioned
utilies by buidling the world with `WITHOUT_NETLINK` src.conf knob.
However, this approach does not cover the cases when person unintentionally
builds a custom kernel without netlink and tries to use the standard userland.
This change adds `option NETLINK` to the default options for each
architecture, fixing the custom kernel issue.
For arm, this change uses `std.armv6` and `std.armv7` (netlink already in)
instead of DEFAULTS.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D39339
Make a pass at the various nexus implementations, fixing some very minor
style issues, obsolete comments, etc.
The method declaration section has become unwieldy in many respects.
Attempt to tame it by:
- Using generated method typedefs
- Grouping methods roughly by category, and then alphabetically.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D38495
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D39088
There is nothing hdmi related in this interface, it's just a generic interface
for crt controller so rename it.
This also remove the 'hdmi' device used in arm kernel config. 'vt' now controls
if we build this interface (sc(4) isn't supported on arm).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39120
device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm TI devices to some proper name.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39119
device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm IMX devices to some proper name.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39118
It was disconnected 5 years ago in 4573cd3914
("arm: allwinner: Disconnect A10/A20 HDMI driver") as it wasn't working.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39117
All devices are in GENERIC and GENERIC is known to boot on those SoCs.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39090
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39089
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39087
It reference to a non-existant dts file apalis-imx6.dts so unlikekly to compile.
Aldo IMX6 support is in GENERIC so anyone interested in this board should
make it work with GENERIC kernel (if that's not already the case).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39086
The order of the interrupt array doesn't matter. Store the described
interrupts at the start of the array to simplify iterating over them.
Reviewed by: imp, kevans
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39094
To allow bhyve manage the virtual timer while in a guest have FreeBSD
use the virtual timer only when bhyve will be unavailable due to not
starting at EL2 where the hypervisor switcher will run.
Reviewed by: imp, kevans
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39093
Eliminate a redundant resource array allow possible use by bhyve later.
Reviewed by: kevans
Sponsored by: Arm Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37424
We always have it, some languages assume it's present, e.g. go
before 1.20. Enable it by default on arm and arm64.
PR: 269070
Reviewed by: kevans
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39059
Offsets for all of thse can be a bit complicated as not all interrupts
will be present, only phys and virt are actually required, and sec-phys
could optionally be specified before phys. Push idx/name pairs into
a new config struct and maintain the old indices while still getting the
correct timers.
Split fdt/acpi attach out independently and allocate interrupts before
we head into the common attach(). The secure physical timer is also
optional there, so mark it so to avoid erroring out if we run into
problems.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D38911
On arm64 PCI config memory is expected to be mapped with a non-posted
device type. To handle this use the new bus_map_resource support in
arm64 to map memory with the new VM_MEMATTR_DEVICE_NP attribute. This
memory has already been allocated and activated, it just needs to be
mapped.
Reviewed by: kevans, mmel
Differential Revision: https://reviews.freebsd.org/D30079
All drivers are already either in GENERIC or in the other arches LINT
so no need to build this one too.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38851
All drivers are already either in GENERIC or in the other arches LINT
so no need to build this one too.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38850
All drivers are already either in GENERIC or in the IMX51 kernel config
so no need to build this one too.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38849
Specific devices are in LINT so no need to build this one as part
of make universe.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38848
Reviewed by: imp
This file defines a small API to be used by other drivers. If any of
these functions are called before the bcm_dma device has attached we
should handle the error gracefully. Fix a formatting quirk while here.
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D38756
The sdhci_bcm driver attach routine relies on bcm_dma already being
attached, in order to allocate a DMA channel. However, both drivers
attached at the default pass so this is not guaranteed. Newer RPI
firmware exposes this assumption, and the result is a NULL-dereference
in bcm_dma_allocate().
To fix this, use BUS_PASS_SUPPORTDEV for bcm_dma.
PR: 268835
Reviewed by: mhorne
MFC after: 1 week
