Commit graph

15 commits

Author SHA1 Message Date
Justin Hibbits
56c1eafe50 IfAPI: Finish conversion of bnxt(4) to IfAPI.
Sponsored by:	Juniper Networks, Inc.
2023-01-31 15:02:18 -05:00
Sumit Saxena
72e9dbb58c if_bnxt: Remove sysctl node vlan_only which is not being used
Removed sysctl node vlan_only which is not being used after migrating
from l2_set_rx_mask to l2_filter_alloc.

Reviewed by: imp
Differential Revsion: https://reviews.freebsd.org/D36444
2022-11-04 16:26:03 -06:00
Sumit Saxena
6033382aab if_bnxt: Display firmware version along with SIT package version
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36441
2022-11-04 16:18:38 -06:00
Sumit Saxena
8945584f93 if_bnxt: add support for Thor controller
Added support for Thor controller.
Below are the supported operations:

1. IPv4 ping (ICMP)
2. iperf / netperf (IPv4 TCP)
3. Promiscuous (tcpdump)
4. Can achieve 20 Gbps on a 25 G link (Uni-Di)
5. Can achieve 60 Gbps on a 100 G link (Uni-Di)
6. Port level and queue level driver stats.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36438
2022-11-04 16:05:57 -06:00
Sumit Saxena
97315f68fe if_bnxt: update hsi_struct_def.h headers
Updates the drivers to Broadcom's latest:
	HWRM Version 1.10.2.34 using HSI definition version 1.8.4

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36436
2022-11-04 15:58:43 -06:00
Alexander Motin
9895a2073f bnxt(4): Mark sysctls MP-safe.
MFC after:	1 month
2021-09-03 13:51:08 -04:00
Mateusz Guzik
38fc6c1443 bnxt: clean up empty lines in .c and .h files 2020-09-01 21:43:23 +00:00
Ed Maste
aeb665b538 remove extraneous double ;s in sys/ 2020-03-30 16:04:25 +00:00
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Stephen Hurd
6a0dc418a6 Don't populate NVRAM sysctls for VFs
Only the PF allows NVRAM interaction on bnxt devices.

Submitted by:	Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by:	Broadcom Limited
2017-12-19 20:32:45 +00:00
Stephen Hurd
7b79d6d61a bnxt: add support for Flow control setting using sysctl
Created sysctl node dev.bnxt.0.fc with following options.

A. dev.bnxt.0.fc.autoneg
B. dev.bnxt.0.fc.rx
C. dev.bnxt.0.fc.tx

Description:-
dev.bnxt.0.fc: flow ctrl
dev.bnxt.0.fc.autoneg: Enable or Disable Autoneg Flow Ctrl: 0 / 1
dev.bnxt.0.fc.rx: Enable or Disable Rx Flow Ctrl: 0 / 1
dev.bnxt.0.fc.tx: Enable or Disable Tx Flow Ctrl: 0 / 1

Submitted by:	Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by:	shurd, sbruno
Approved by:	sbruno (mentor)
Sponsored by:	Broadcom Limited
Differential Revision:	https://reviews.freebsd.org/D12599
2017-10-24 21:18:50 +00:00
Stephen Hurd
59059cda6a bnxt: Choose better HW LRO defaults for performance
1) Choose correct Firmware options for HW LRO for best performance
2) Delete TBD and other comments which are not required.
3) Added sysctl interface to enable / disable / modify different factors
   of HW LRO.
4) Disabled HW LRO by default to avoid issues with packet forwarding

This allows much better control over the LRO configuration via sysctls, and
uses much better defaults.  Hardware LRO can now be enabled/disabled
independantly from the software LRO, and the tuning parameters are exposed.

manpage updates coming soon.

Submitted by:	Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by:	shurd, sbruno
Approved by:	sbruno (mentor)
Sponsored by:	Broadcom Limited
Differential Revision:	https://reviews.freebsd.org/D12223
2017-09-23 16:59:37 +00:00
Stephen Hurd
47516844a3 Added support for displaying HW port stats using sysctl.
This provides port stats (updated once per second) in
dev.bnxt.X.port_stats for PFs.  VFs do not have access to the port stats.

Submitted by:	Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by:	shurd, sbruno
Approved by:	sbruno (mentor)
Sponsored by:	Broadcom Limited
Differential Revision:	https://reviews.freebsd.org/D11914
2017-09-08 18:03:34 +00:00
Sean Bruno
5a1813ecc1 bnxt: Implement interrupt coalescing options using sysctl.
Submitted by:	 bhargava.marreddy@broadcom.com
Differential Revision:	https://reviews.freebsd.org/D11702
2017-07-25 15:33:34 +00:00
Stephen Hurd
d933e97f9d New driver for Broadcom NetXtreme-C and NetXtreme-E devices.
This driver uses the iflib framework supporting Broadcom
25/50Gbps devices.

Reviewed by:	gallatin, wblock
Approved by:	davidch
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	Broadcom Limited
Differential Revision:	https://reviews.freebsd.org/D7551
2016-11-15 20:35:29 +00:00