After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.
MFC-After: 1 week
Sponsored by: Metify Inc.
Sponsored by: Klara Inc.
Add initialization for new Huawei 4G E3372_NCM, E3372v153_NCM,
E5573Cs322_NCM, E5573Cs322_ECM, and E5573Cs322_ACM.
Remove now-obsolete Huawei 3G E3131 init sequence. These devices are
obsolete, share IDs with new devices and the 3G networks are shutdown.
These old devices work correctly via the 4G code while still allowing
the shared IDs to work differently for the new devices.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Some devices have CDC_CM descriptors that would point us to
the wrong interfaces. Add a quirk to ignore those (prefering the
CDC_UNION descriptor effectively)
Reviewed by: manu
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37942
To avoid data loss, make sure both the receive and transmit data toggles
get reset, before trying to read or write any data.
MFC after: 1 week
Sponsored by: NVIDIA Networking
To avoid issues starting any USB transfers before the open
function is complete.
Differential Revision: https://reviews.freebsd.org/D36391
MFC after: 1 week
Sponsored by: NVIDIA Networking
Some controllers like the XHCI(4) loose track of the data toggle value when
USB receive transfers are cancelled at close. This in turn can lead to to
data loss after the next open.
To avoid data loss, make sure both the receive and transmit data toggles
get reset, before trying to read or write any data.
Differential Revision: https://reviews.freebsd.org/D36391
Submitted by: Dave Baukus <daveb@spectralogic.com>
MFC after: 1 week
Sponsored by: NVIDIA Networking
Seems like a copy-paste error, or at least this made more sense when the
sio(4) driver still existed. This modifies the debug port name displayed
at boot, but otherwise has no functional change.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33278
After switching the dongle to the Huawei alternate mode(modem mode)
with usb_modeswitch the serial interfaces had all of their ids set to
0xFF.
After modifying umodem to work with that it attached successfully and
I've managed to configure device with standard AT commands to get
internet connection.
folder, only keeping the zero length packet API introduced in sys/dev/usb
after more reports of USB serial devices not supporting ZLPs.
Reported by: mav@
MFC after: 1 week
Sponsored by: NVIDIA Networking
port devices. If it gets eaten it is fine. Many USB device side implementations
don't properly support the clear endpoint halt command and if they do, data is lost
because the transmit FIFO is typically reset when this command is received.
Tested by: jmg
MFC after: 1 week
Sponsored by: NVIDIA Networking
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Code changes in this commit were obtained from straight from OpenBSD's
uplcom.c with almost no modification, the list of chip names and USB
IDs was obtained from Linux.
Differential Revision: https://reviews.freebsd.org/D27952
Submitted by: tomli_tomli.me (Yifeng Li)
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Enable this for the NovAtel OEMv2 GPS receiver.
Not fixed: The receiver shows up as "<Interface 0>" in the device
tree, because that is literally what the descriptor-string is.
Reviewed by: hselasky@
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
