ld.bfd requires an R_386_PLT32 relocation for calls to ifuncs
rather than R_386_PC32. (lld permits R_386_PC32.)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D40811
I do not know why this is here but it blocks compilation.
Removing it makes the builtin option the same as the module build
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
Notable upstream pull request merges:
#14654 Pack our DDT ZAPs a bit denser
#14979 Again fix race between zil_commit() and zil_suspend()
#14985 Some ZIO micro-optimizations
#15000 Fix remount when setting multiple properties
#15004 ddt_addref: remove unnecessary phys fill when refcount is 0
#15007 Do not report bytes skipped by scan as issued
#15023 Enable tuning of ZVOL open timeout value
Obtained from: OpenZFS
OpenZFS commit: 009d3288de
OpenZFS tag: zfs-2.2.0-rc1
Notable upstream pull request merges:
#14925 Another set of vdev queue optimizations
#14964 Use big transactions for small recordsize writes
#14999 ZIL: Fix another use-after-free
Obtained from: OpenZFS
OpenZFS commit: a9d6b0690b
This is Broadcom's mpi3mr driver for FreeBSD version 8.6.0.2.0.
The mpi3mr driver supports Broadcom SAS4116-based cards in the 9600
series: 9670W-16i, 9670-24i, 9660-16i, 9620-16i, 9600-24i, 9600-16i,
9600W-16e, 9600-16e, 9600-8i8e.
Initially only available as a module and on amd64/arm64, since that's
how it has been tested to date. Future commits will add it to the kernel
build and may expand the architectures it is supported on.
Co-authored-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Feedback-by: ken (prior versions)
Reviewed-by: imp
RelNotes: yes
Differential-Revision: https://reviews.freebsd.org/D36771
Differential-Revision: https://reviews.freebsd.org/D36772
gVNIC is a virtual network interface designed specifically for
Google Compute Engine (GCE). It is required to support per-VM Tier_1
networking performance, and for using certain VM shapes on GCE.
The NIC supports TSO, Rx and Tx checksum offloads, and RSS.
It does not currently do hardware LRO, and thus the software-LRO
in the host is used instead. It also supports jumbo frames.
For each queue, the driver negotiates a set of pages with the NIC to
serve as a fixed bounce buffer, this precludes the use of iflib.
Reviewed-by: markj
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39873
This lets one use ossl(4) for AES-GCM operations on contemporary amd64
platforms. A kernel benchmark indicates that this gives roughly
equivalent throughput to aesni(4) for various buffer sizes.
Bulk processing is done in aesni-gcm-x86_64.S, the rest is handled in a
C wrapper ported from OpenSSL's gcm128.c.
Sponsored by: Stormshield
Sponsored by: Klara, Inc.
Reviewed by: jhb
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D39967
aes-gcm-avx512.S is generated from OpenSSL 3.1 and implements AES-GCM.
ossl_x86.c detects whether the CPU implements the required AVX512
instructions; if not, the ossl(4) module does not provide an AES-GCM
implementation. The VAES implementation increases throughput for all
buffer sizes in both directions, up to 2x for sufficiently large
buffers.
The "process" implementation is in two parts: a generic OCF layer in
ossl_aes.c that calls a set of MD functions to do the heavy lifting.
The intent there is to make it possible to add other implementations for
other platforms, e.g., to reduce the diff required for D37421.
A follow-up commit will add a fallback path to legacy AES-NI, so that
ossl(4) can be used in preference to aesni(4) on all amd64 platforms.
In the long term we would like to replace aesni(4) and armv8crypto(4)
with ossl(4).
Note, currently this implementation will not be selected by default
since aesni(4) and ossl(4) return the same probe priority for crypto
sessions, and the opencrypto framework selects the first registered
implementation to break a tie. Since aesni(4) is compiled into the
kernel, aesni(4) wins. A separate change may modify ossl(4) to have
priority.
Sponsored by: Stormshield
Sponsored by: Klara, Inc.
Reviewed by: jhb
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D39783
Continue D40356 and switch the remaining parts of mbuf-related
code to the Netlink mbufs.
Reviewed By: gallatin
Differential Revision: https://reviews.freebsd.org/D40368
MFC after: 2 weeks
Hooked to devctl_notify, this allows consumers to received events
by subscribing to a system over a generic netlink protocol
Reviewed by: imp, melifaro
Differential Revision: https://reviews.freebsd.org/D37574
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Import BSD-3-Clause-Clear ath11k driver assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
Add the module build framework but keep disconnected from the
build for now.
The current driver (or rather LinuxKPI) lacks support for some
"qcom" bits needed in order to get things working.
There was interest by various people to enhance support further.
We initially only plan to support PCI parts but it would be great
to further enhance qcom SoC support to run on several (cheap) APs.
The firmware is provided by port net/wifi-firmware-ath11k-kmod.
Given the lack of full license texts on most files this is
imported under the draft policy for handling SPDX files (D29226)
and with approval for BSD-3-Clause-Clear. [1]
Approved by: core (jhb, 2023-05-11) [1]
MFC after: 2 months
Notable upstream pull request merges:
#11680 Add support for zpool user properties
#14145 Storage device expansion "silently" fails on degraded vdev
#14405 Create zap for root vdev
#14659 Allow MMP to bypass waiting for other threads
#14674 Miscellaneous FreBSD compilation bugfixes
#14692 Fix some signedness issues in arc_evict()
#14702 Fix typo in check_clones()
#14715 module: small fixes for FreeBSD/aarch64
#14716 Trim needless zeroes from checksum events
#14719 vdev: expose zfs_vdev_max_ms_shift as a module parameter
#14722 Fix "Detach spare vdev in case if resilvering does not happen"
#14723 freebsd clone range fixes
#14728 Fix BLAKE3 aarch64 assembly for FreeBSD and macOS
#14735 Fix in check_filesystem()
#14739 Fix data corruption when cloning embedded blocks
#14758 Fix VERIFY(!zil_replaying(zilog, tx)) panic
#14761 Revert "ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()"
#14774 FreeBSD .zfs fixups
#14776 FreeBSD: make zfs_vfs_held() definition consistent with declaration
#14779 powerpc64: Support ELFv2 asm on Big Endian
#14788 FreeBSD: add missing vop_fplookup assignments
#14789 PAM: support the authentication facility
#14790 Revert "Fix data race between zil_commit() and zil_suspend()"
#14795 Fix positive ABD size assertion in abd_verify()
#14798 Mark TX_COMMIT transaction with TXG_NOTHROTTLE
#14804 Correct ABD size for split block ZIOs
#14806 Use correct block pointer in block cloning case.
#14808 blake3: fix up bogus checksums in face of cpu migration
Obtained from: OpenZFS
OpenZFS commit: d96e29576c
Also adds fixups and cleanups:
- apply the child's mode/speed
- implement suspend/resume support
- use RF_SHAREABLE interrupts
- use bus_delayed_attach_children since the transfer can use interrupts
- add support for newly added spibus features (cs_delay and flags)
Operation tested on Broadwell (Wildcat Point) MacBookPro12,1.
Attachment also tested on Kaby Lake (Sunrise Point) Pixelbook.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D29249
Import ISC-licensed ath10k driver assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
Import support to redirect fwlogs to kernel messages
from https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/389075
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
Any other native driver using BUS_PROBE_DEFAULT will attach
ignoring this one by default given bsd_probe_return is set
to a lower priority.
Add the module build framework.
We only support PCI parts.
The firmware is provided by port net/wifi-firmware-ath10k-kmod.
Given the lack of full license texts on most files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (emaste, 2022-04-08) [1]
MFC after: 2 months
Import common ISC-licensed athk parts assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
The only modification should be for FreeBSD module
handling in main.c.
Add the module build framework unconnected to the
build for now.
These files will be shared by ath1?k drivers.
MFC after: 2 months
Add files needed by ath1?k drivers to linuxkpi/linuxkpi_wlan.
This contain (skeleton) implementations of what is needed to
compile but specifically mhi/qmi/qrtr will need more work for
ath11k.
MFC after: 2 months
These are the changes since the last update (copy-pasted from the
release notes for Chelsio Unified Wire v3.18.0.0):
====================
Version : 1.27.3.0
Date : 04/07/2023
Fixes
-----
BASE:
- Fixed a hang if module eeprom reads gives invalid data.
- KR backlplane no-fec link problem fixed.
OFLD:
- iscsi ddp errors fixed.
- iwarp connection abort in rare cases causing NIC traffic hang fixed.
ENHANCEMENTS
------------
BASE:
- Cisco GLC-TE 1G modules support added.
====================
Version : 1.27.1.0
Date : 12/02/2022
Fixes
-----
BASE:
- memwrite dsgl cannot be used for T5.
OFLD:
- Enabled FCoE in SO adapters.
- TOE-TLS crash fixed.
- iscsi hang fixed.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add DPAA2 console support for MC and AIOP (latter untested) for FDT
systems. ACPI systems are prepared but need some proper bus function
in order to get the address from MC (and likely a file splitup then).
This will come at a later stage once other ACPI/FDT bus parts are
cleared up.
The work was originally done in July 2022 and finally switched to
bus_space[1] lately to be ready for main.
Suggested by: andrew [1]
Reviewed by: dsl
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D38592
dtrace_instr_size() is needed by the forthcoming RISC-V port of kinst,
as well as by libdtrace in D38825 for both amd64 and RISC-V.
Reviewed by: markj, mhorne
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39489
Only build MAC/veriexec modules when MK_VERIEXEC is yes or we
are building all modules.
Add VERIEXEC knob to kernel __DEFAULT_NO_OPTIONS
Reviewed by: sjg
Obtained from: Juniper Networks, Inc.
This changes intends to reduce the bar to the kernel unit-testing by
introducing a new kernel-testing framework ("ktest") based on Netlink,
loadable test modules and python test suite integration.
This framework provides the following features:
* Integration to the FreeBSD test suite
* Automatic test discovery
* Automatic test module loading
* Minimal boiler-plate code in both kernel and userland
* Passing any metadata to the test
* Convenient environment pre-setup using python testing framework
* Streaming messages from the kernel to the userland
* Running tests in the dedicated taskqueues
* Skipping or parametrizing tests
Differential Revision: https://reviews.freebsd.org/D39385
MFC after: 2 weeks
