The <sys/socket.h> is not supposed to declare NULL, according to POSIX.
Our implementation complies with that, meaning that we need to make sure
that CMSG_*() doesn't use it.
data (headers). Historically the size of the headers was not checked
against the socket buffer space. Application could easily overcommit the
socket buffer space.
With the new sendfile (r293439) the problem remained, but a KASSERT was
inserted that checked that amount of data written to the socket matches
its space. In case when size of headers is bigger that socket space,
KASSERT fires. Without INVARIANTS the new sendfile won't panic, but
would report incorrect amount of bytes sent.
o With this change, the headers copyin is moved down into the cycle, after
the sbspace() check. The uio size is trimmed by socket space there,
which fixes the overcommit problem and its consequences.
o The compatibility handling for FreeBSD 4 sendfile headers API is pushed
up the stack to syscall wrappers. This required a copy and paste of the
code, but in turn this allowed to remove extra stack carried parameter
from fo_sendfile_t, and embrace entire compat code into #ifdef. If in
future we got more fo_sendfile_t function, the copy and paste level would
even reduce.
Reviewed by: emax, gallatin, Maxim Dounin <mdounin mdounin.ru>
Tested by: Vitalij Satanivskij <satan ukr.net>
Sponsored by: Netflix
wraps sendmsg(2) and recvmsg(2) into batch send and receive operation.
The goal of this implementation is only to provide API compatibility
with Linux.
The cancellation behaviour of the functions is not quite right, but
due to relative rare use of cancellation it is considered acceptable
comparing with the complexity of the correct implementation. If
functions are reimplemented as syscalls, the fix would come almost
trivial. The direct use of the syscall trampolines instead of libc
wrappers for sendmsg(2) and recvmsg(2) is to avoid data loss on
cancellation.
Submitted by: Boris Astardzhiev <boris.astardzhiev@gmail.com>
Discussed with: jilles (cancellation behaviour)
MFC after: 1 month
up to now.
The new sendfile is the code that Netflix uses to send their multiple tens
of gigabits of data per second. The new implementation features asynchronous
I/O, when I/O operations are launched, but not awaited to be complete. An
explanation of why such behavior is beneficial compared to old one is
going to be too long for a commit message, so we will skip it here.
Additional features of new syscall are extra flags, which provide an
application more control over data sent. The SF_NOCACHE flag tells
kernel that data shouldn't be cached after it was sent. The SF_READAHEAD()
macro allows to specify readahead size in pages.
The new syscalls is a drop in replacement. No modifications are required
to applications. One can take nginx binary for stable/10 and run it
successfully on head. Although SF_NODISKIO lost its original sense, as now
sendfile doesn't block, and now means something completely different (tm),
using the new sendfile the old way is absolutely safe.
Celebrates: Netflix global launch!
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
Relnotes: yes
ever used. It didn't go into stable/10, neither was documented.
It might be useful, but we collectively decided to remove it, rather
leave it abandoned and unmaintained. It is removed in one single
commit, so restoring it should be easy, if anyone wants to reopen
this idea.
Sponsored by: Netflix
were primarily used to size the sysctl name list macros that were removed
in r254295. A few other constants either did not have an associated
sysctl node, or the associated node used OID_AUTO instead.
PR: ports/184525 (exp-run)
This is still under a bit of flux, as the final API hasn't been nailed
down. It's also unclear whether we should define the two new types in the
header or not - it may allow bad code to compile that shouldn't (ie,
since uintX's are defined, the developer may not include sys/types.h.)
Reviewed by: peter, imp, bde
Sponsored by: Netflix, Inc.
The accept4() function, compared to accept(), allows setting the new file
descriptor atomically close-on-exec and explicitly controlling the
non-blocking status on the new socket. (Note that the latter point means
that accept() is not equivalent to any form of accept4().)
The linuxulator's accept4 implementation leaves a race window where the new
file descriptor is not close-on-exec because it calls sys_accept(). This
implementation leaves no such race window (by using falloc() flags). The
linuxulator could be fixed and simplified by using the new code.
Like accept(), accept4() is async-signal-safe, a cancellation point and
permitted in capability mode.
* MSG_NOSIGNAL is in POSIX.1-2008.
* MSG_NOTIFICATION (SCTP) is not in POSIX.
* PRU_FLUSH_* (SCTP) are not in POSIX.
* bindat()/connectat() are not in POSIX.
Discussed with: rrs (PRU_FLUSH_*)
This change allows creating file descriptors with close-on-exec set in some
situations. SOCK_CLOEXEC and SOCK_NONBLOCK can be OR'ed in socket() and
socketpair()'s type parameter, and MSG_CMSG_CLOEXEC to recvmsg() makes file
descriptors (SCM_RIGHTS) atomically close-on-exec.
The numerical values for SOCK_CLOEXEC and SOCK_NONBLOCK are as in NetBSD.
MSG_CMSG_CLOEXEC is the first free bit for MSG_*.
The SOCK_* flags are not passed to MAC because this may cause incorrect
failures and can be done later via fcntl() anyway. On the other hand, audit
is expected to cope with the new flags.
For MSG_CMSG_CLOEXEC, unp_externalize() is extended to take a flags
argument.
Reviewed by: kib
int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen);
int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen);
which allow to bind and connect respectively to a UNIX domain socket with a
path relative to the directory associated with the given file descriptor 'fd'.
- Add manual pages for the new syscalls.
- Make the new syscalls available for processes in capability mode sandbox.
- Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on
the directory descriptor for the syscalls to work.
- Update audit(4) to support those two new syscalls and to handle path
in sockaddr_un structure relative to the given directory descriptor.
- Update procstat(1) to recognize the new capability rights.
- Document the new capability rights in cap_rights_limit(2).
Sponsored by: The FreeBSD Foundation
Discussed with: rwatson, jilles, kib, des
socket protocol number. This is useful since the socket type can
be implemented by different protocols in the same protocol family,
e.g. SOCK_STREAM may be provided by both TCP and SCTP.
Submitted by: Jukka A. Ukkonen <jau iki fi>
PR: kern/162352
Discussed with: bz
Reviewed by: glebius
MFC after: 2 weeks
on extended and extensible structs if_msghdrl and ifa_msghdrl. This
will allow us to extend both the msghdrl structs and eventually if_data
in the future without breaking the ABI.
Bump __FreeBSD_version to allow ports to more easily detect the new API.
Reviewed by: glebius, brooks
MFC after: 3 days
If various checks are omitted, the CMSG_NXTHDR macro expands to
(struct cmsghdr *)((char *)(cmsg) + \
_ALIGN(((struct cmsghdr *)(cmsg))->cmsg_len))
Although there is no alignment problem (assuming cmsg is properly aligned
and _ALIGN is correct), this violates -Wcast-align on strict-alignment
architectures. Therefore an intermediate cast to void * is appropriate here.
There is no workaround other than not using -Wcast-align.
MFC after: 2 weeks
you tag a socket with an uint32_t value. The cookie can then be
used by the kernel for various purposes, e.g. setting the skipto
rule or pipe number in ipfw (this is the reason SO_USER_COOKIE has
been implemented; however there is nothing ipfw-specific in its
implementation).
The ipfw-related code that uses the optopn will be committed separately.
This change adds a field to 'struct socket', but the struct is not
part of any driver or userland-visible ABI so the change should be
harmless.
See the discussion at
http://lists.freebsd.org/pipermail/freebsd-ipfw/2009-October/004001.html
Idea and code from Paul Joe, small modifications and manpage
changes by myself.
Submitted by: Paul Joe
MFC after: 1 week
include file, and include this where the previous duplicate definitions were.
Static program checkers like FlexeLint rightfully take a dim view of
duplicate definitions, even if they currently are identical.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco
referencing the files VM pages are returned from the network stack,
making changes to the file safe.
This flag does not guarantee that the data has been transmitted to the
other end.
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
1. CMSG_NXTHDR(mhdr, cmsg) is supposed to dereference cmsg and return
the next header in the chain. If cmsg is NULL it should return
the first header, behaving essentially like CMSG_FIRSTHDR().
2. inet6_rth_(space|init|add) should do basic checking on their input
to verify that the number of headers (segments) is
between 0 and 127 inclusive.
MFC-After: 1 month
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
VM pages into mbufs as it can -- up to the free send socket buffer space.
The outer loop then drops the whole mbuf chain into the send socket buffer,
calls tcp_output() on it and then waits until 50% of the socket buffer are
free again to repeat the cycle. This way tcp_output() gets the full amount
of data to work with and can issue up to 64K sends for TSO to chop up in
the network adapter without using any CPU cycles. Thus it gets very efficient
especially with the readahead the VM and I/O system do.
The previous sendfile(2) code simply looped over the file, turned each 4K
page into an mbuf and sent it off. This had the effect that TSO could only
generate 2 packets per send instead of up to 44 at its maximum of 64K.
Add experimental SF_MNOWAIT flag to sendfile(2) to return ENOMEM instead of
sleeping on mbuf allocation failures.
Benchmarking shows significant improvements (95% confidence):
45% less cpu (or 1.81 times better) with new sendfile vs. old sendfile (non-TSO)
83% less cpu (or 5.7 times better) with new sendfile vs. old sendfile (TSO)
(Sender AMD Opteron 852 (2.6GHz) with em(4) PCI-X-133 interface and receiver
DELL Poweredge SC1425 P-IV Xeon 3.2GHz with em(4) LOM connected back to back
at 1000Base-TX full duplex.)
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
and other applications to query the state of the stack regarding the
accept queue on a listen socket:
SO_LISTENQLIMIT Return the value of so_qlimit (socket backlog)
SO_LISTENQLEN Return the value of so_qlen (complete sockets)
SO_LISTENINCQLEN Return the value of so_incqlen (incomplete sockets)
Minor white space tweaks to existing socket options to make them
consistent.
Discussed with: andre
MFC after: 1 week
- Add unp_addsockcred() (for LOCAL_CREDS).
- Add an argument to unp_connect2() to differentiate between
PRU_CONNECT and PRU_CONNECT2. (for LOCAL_CONNWAIT)
Obtained from: NetBSD (with some changes)
SIGPIPE signal for the duration of the sento-family syscalls. Use it to
replace previously added hack in Linux layer based on temporarily setting
SO_NOSIGPIPE flag.
Suggested by: alfred
to do a window update to the peer (thru an ACK) from soreceive()
itself. TCP will do that upon return from the socket callback.
Sending a window update from soreceive() results in a lock reversal.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
define NULL. This means we cannot use NULL in the definition of CMSG_NXTHDR.
So replace NULL with 0.
PR: kern/60309
Submitted by: Jeff King <peff-freebsd@peff.net>
them to behave the same as if the SS_NBIO socket flag had been set
for this call. The SS_NBIO flag for ordinary sockets is set by
fcntl(fd, F_SETFL, O_NONBLOCK).
Pass the MSG_NBIO flag to the soreceive() and sosend() calls in
fifo_read() and fifo_write() instead of frobbing the SS_NBIO flag
on the underlying socket for each I/O operation. The O_NONBLOCK
flag is a property of the descriptor, and unlike ordinary sockets,
fifos may be referenced by multiple descriptors.
