upstream/opnsense-src
1
0
Fork 0
mirror of https://github.com/opnsense/src.git synced 2026-04-04 17:05:14 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
219451 commits 29 branches 223 tags 2.1 GiB
Commit graph

11 commits

Author SHA1 Message Date
Navdeep Parhar
c88fa71928 cxgbe(4): Update T4, T5 and T6 firmwares to 1.16.26.0. Changelog for 
all public firmwares for all chips since the last release (1.15.37.0)
follows (it's a straight copy-paste from the Release Notes for the
12/30/2016 Unified Wire release on Chelsio's website).

T6 Firmware
++++++++++++

Version : 1.16.26.0
Date    : 12/28/2016

Fixes
-----

BASE:
- Max number of egress and control queues adjusted to accomodate
  co-processor mode queues.
- Fixed intermittent DDR3/4 ECC errors.
- Fixed a traffic stall when ETS BW is configured as 0%.
- Max number of ethctrl queue in VF set to 1.

ETH:
- Added a new config file option 'speed' under port section to set the
  port speed.  Use only when auto negotiation is off.
- FEC option removed from firmware config file. cxgbtool can be used to
  change the fec setting.
- CPL_TX_TNL_LSO cpl handling added in ETH_TX_PKT_VM handler. This fixes
  large tunnel tcp packet support for VxLAN.

Version : 1.16.22.0
Date    : 12/05/2016

Fixes
-----

BASE:
- fw_port_type updated in fw API to match kernel.org definitions.
- Saved power by disaling unused MAC lanes.
- Configures correct power bin.
- Enhanced DDR4 performance.
- Enabled interrupts.
- Fixed an issue where filter rule for 'unicast hash' is not working.

ETH:
- Disabled auto negotiation by default because most of 100G switches do
  not support AN as of today.
- Fixed flow control not getting disabled problem.
- Fixed an issue where port0 doesn't come up sometimes.
- Fixed 10G link not coming up issue.
- Fixed an issue with promiscuous mode when dcbx disabled.

OFLD:
- Fixed a connection stuck issue when abort is received during out of tx
  pages backpressure.

ENHANCEMENTS
------------

BASE:
- Added inline TLS mode support.

Version : 1.16.12.0
Date    : 11/11/2016

ENHANCEMENTS
------------

BASE:
- Added T6 support.
- Added T6 1G/10G/25G/40G/100G link speeds.
- Added T6 co-processor mode crypto support.
- Added facility to increase link AN+AEC timeout.

OFLD:
- Added support for all T5 offload protocols except FCoE.

iSCSI:
- iscsi completion moderation enabled.

=======================================================================

T5 Firmware
++++++++++++

Version : 1.16.26.0
Date    : 12/28/2016

FIXES
-----

BASE:
- Max number of ethctrl queue in VF set to 1.

Version : 1.16.22.0
Date    : 12/05/2016

FIXES
-----

BASE:
- Fixed an issue where filter rule for 'unicast hash' is not working.

ETH:
- Fixed an issue with promiscuous mode when dcbx disabled.

ENHANCEMENTS
------------

ETH:
- Added 40G-KR support.

Version : 1.16.12.0
Date    : 11/11/2016

FIXES
-----

BASE:
- Fixed multiple issues related with VFs FLR processing.
- Fixed channel assignment based on number of ports in adapter.
- Fixed a crash when VM having PF assigned as passthrough mode is
  rebooted.
- Handled 2nd HELLO command from the same PF without seeing BYE from the
  same PF and if that is the only PF.
- A warning is printed in firmware log if PCI-E cookie generation is
  enabled in serial initialization file.
- Fixed multiple issues related with Filtering.
- Enabled DSGL memory write for iscsi and rdma.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
  and VPD version numbers.
- Fixed an issue where LVDS output was not getting enabled using vpd.

DCBX:
- Fixed DCBX CEE Incorrect class to pririty mapping.
- Fixed incorrect interpretation of DCBX IEEE PFC.

ETH:
- Adjusted the link related delay timings according to the QSFP spec.
- Improved 40G link bringup time with few switches.

OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
  firmware fatal error.

FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.

ENHANCEMENTS
------------

BASE:
- Added 10G KR/KX support.
- Added T540-BT adapter support.
- Added 4 new rss key modes for PFs and VFs.

OFLD:
- Added new WR FW_RI_FR_NSMR_TPTE_WR to improve fast MR write
  performance in RDMA.

Version : 1.16.5.0
Date    : 10/26/2016

FIXES
-----

BASE:
- Fixed multiple issues where FLR from multiple VFs can cause firmware
  crash.
- Fixed channel assignment based on number of ports in adapter.
- Fixed the HELLO command master force api to handle the 2nd HELLO
  correctly without getting BYE from the PF driver.
- Added facility to retrieve Serial configuration and VPD version. Two
  new FW_PARAMS_CMD[DEV] options added to retrieve these values.
- Fixed multiple issues where FLR from multiple VFs are not completing.
- Added new RSS hash secret key modes.
- Fixed an issue where LVDS output was not getting enabled using vpd.

DCBX:
- Fixed an issue where iscsi tlv is sent incorrectly to host (DCBX CEE).
- Fixed an issue where app priority values are not handled correctly
  in fw (DCBX IEEE).

ETH:
- Adjusts the link related delay timings according to the QSFP spec.
- Changed 2.5G mac speed bit to 25G mac speed bit in fw API.
- Improvement in 40G link bringup time with few switches.

OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
  firmware fatal error.
- Fixed DSGL memory write in T5. Now iwarp and iscsi can use DSGL to do
  memory write.
- Fixed multiple issues in hash filter mode where incorrect protocol
  mask was getting used and affecting hash filter functionality.
- New fastpath WR FW_RI_FR_NSMR_TPTE_WR (with fully populated TPTE) is
  added for small REG_MR operations.

FOiSCSI:
- Fixed an issue in foiscsi recovery path.
- Fixed an issue where foiscsi (in VM in PCIE passthrough mode) didn't
  come up after VM FLR.

ENHANCEMENTS
------------

ETH:
- Implemented 1G/10G KR/KX ability.
- Implemented T540-BT adapter support.

=======================================================================

T4 Firmware
+++++++++++

Version : 1.16.12.0
Date    : 11/11/2016

FIXES
-----

BASE:
- Fixed an issue where reading temperature sesors using ldst command
  causes mailbox timeout.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
  and VPD version numbers.

ETH:
- Fixed DCBX CEE Incorrect class to pririty mapping.

FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.

MFC after:	3 days
Sponsored by:	Chelsio Communications
 2017-01-03 22:05:07 +00:00
Navdeep Parhar
3cbaf64f2e cxgbe(4): Update firmwares from version 1.16.12.0 to 1.16.22.0. 
Obtained from:	Chelsio Communications
MFC after:	3 days
Sponsored by:	Chelsio Communications
 2016-12-06 12:43:07 +00:00
Navdeep Parhar
a10443e8ba cxgbe(4): Include firmware for T6 cards in the driver. Update all 
firmwares to 1.16.12.0.

Obtained from:	Chelsio Communications
MFC after:	3 days
Sponsored by:	Chelsio Communications
 2016-11-30 00:26:35 +00:00
Navdeep Parhar
96807c23ce cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0. 
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release.  Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
   queue was ignored.
 - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Fixed 40G link failures with some switches when auto-negotiation enabled.
 - Fixed to improve on link bring-up time.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where bogus d3hot bits were set causing traffic stall.
 - Fixed an issue where sometimes adapter was not seen after reboot.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.
 - Fixed an issue where link failed to come up after removing twinax cable and
   inserting optical module.

ETH
 - Fixed a link flap issue on T580-CR.

OFLD
 - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.

FOiSCSI
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
   use given inerface.
 - Fixed an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
 - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
  settings.(DCBX IEEE)
 - Fixed an issue where app priority values are not handled correctly in fw.
  (DCBX IEEE)
 - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added new interface to program DCA settings in SGE contexts; allow 32-byte
   IQE size
 - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

OFLD:
 - WR opcode is returned to host in cqe error response.

22.2. T4 Firmware
+++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
   was ignored.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.

FOiSCSI:
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
   use given inerface.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
 - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)

FOiSCSI
 - Fixes an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================

Obtained from:	Chelsio Communications
MFC after:	6 weeks
Relnotes:	yes
Sponsored by:	Chelsio Communications
 2016-05-13 17:38:59 +00:00
Navdeep Parhar
dd991bd5a1 cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0. 
These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire
v2.12.0.2 for Linux" release.  Changes since last release are listed in the
"Release Notes" accompanying the beta release and are copy-pasted here as well.

The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll
MFC this (after 2 months) only if it ends up in a GA release.

================================================================================
================================================================================

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.15.28.0
Date    : 02/29/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
   queue was ignored.
 - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
 - Fixed an issue in watchdog which was causing VM bring-up failure after
   reboot.
 - Fixed 40G link failures with some switches when auto-negotiation enabled.
 - Fixed to improve on link bring-up time.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where bogus d3hot bits were set causing traffic stall.
 - Fixed an issue where sometimes adapter was not seen after reboot.
 - Fixed an issue where iWARP was crashing in conjunction with traffic
   management.
 - Fixed an issue where link failed to come up after removing twinax cable and
   inserting optical module.

OFLD
 - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.

FOiSCSI
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
   use given inerface.

ENHANCEMENTS
------------

BASE:
 - Added new interface to program DCA settings in SGE contexts; allow 32-byte
   IQE size
 - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

OFLD:
 - WR opcode is returned to host in cqe error response.

================================================================================
================================================================================

22.2. T4 Firmware
+++++++++++++++++

Version : 1.15.28.0
Date    : 02/29/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
   was ignored.
 - Fixed an issue in watchdog which was causing VM bring-up failure after
   reboot.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where iWARP was crashing in conjunction with traffic
   management.

FOiSCSI:
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
   use given inerface.

ENHANCEMENTS
------------

BASE:
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

================================================================================

Obtained from:	Chelsio Communications
MFC after:	2 months
Sponsored by:	Chelsio Communications
 2016-03-01 02:36:50 +00:00
Navdeep Parhar
d94b89b915 cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The 
changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste
from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0
release on the website).

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.14.4.0
Date    : 08/05/2015
================================================================================

FIXES
-----

BASE:
- Fixes a potential data path hang by properly programming PMTX congestion
  threshold settings.
- Fixes a potential initialization error when accessing a configuration file
  stored on the flash.
- Fixes a regression where SGE resources can be miss-sized if iWARP is disabled.

ETH:
- Fixes a timing issue that would prevent CR4 links from coming up with some
  switches.

FOFCoE:
- Defers fcoe linkdown mailbox command handling till LOGO is sent.
- Updates vlan prio for all outstanding IOs during dcbx update.

ENHANCEMENTS
------------

BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.

ETH:
- Enhances segmentation offload to include VxLAN and Geneve.
- Adds PTP support.
- Adds new interface to allow the driver to query the VI rss table base
  addresses.
- Allows the driver to program the SGE ingrext contxt CongDrop field.

OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
  and rcv scale factors.

iSCSI:
- Adds support for iscsi segmentatation offload (ISO).
- Adds support for iscsi t10-dif offload.

FOiSCSI:
- Sets FORCE_BIT for cut through processing for FOiSCSI.

FOFCoE:
- Adds support for FCoE BB6.
- Improves WRITE performance.

================================================================================
================================================================================

Version : 1.13.32.0
Date    : 03/25/2015
================================================================================

FIXES
-----

BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
   negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
   adapter configurations)
- Fixes config file based PL_TIMEOUT register programming

ETH:
- Fixes a potential EO UDP SEG header corruption
- Fixes an issue where 1000Base-X was not enabled correctly when using QSA
   modules

OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1

FOFCoE:
- Fixes fcoe xchg leaks in linkdown/peer down path
- Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse
- Fixes fw crash by clearing fcf flowc during bye

FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.

ENHANCEMENTS
------------

BASE:
- Adds support for VFs on PFs 4 to 7
- Adds support for QPs/CQs on any physical and virtual function

ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
- Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables)

OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software

FOISCSI:
- Adds IPv6 support for foiscsi. Keeps backward compatibility with
   old foiscsi drivers which doesn't support ipv6.

FOFCoE:
- Added fcoe debug support in flowc dump

================================================================================
================================================================================

Version : 1.12.25.0
Date    : 10/22/2014
================================================================================

FIXES
-----

BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Fixes an issue where the link would intermittently fail to come up
- Fixes an issue where adapters with an external PHY couldn't run at 100Mbps
- Fixes an issue where active optical cables were not recognized
- Fixes link advertising issues on T520-BT (speed and pause frames) that would
  cause the link to negotiate unexpected settings
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested

ETH:
- Fixes NVGRE Segmentation Offload network header generation.

DCBX:
- Fixes an issue where some settings were not being sent to the switch
  correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
  FW
- Fixes a firmware crash on DCBX APP information request before link up

FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT

ENHANCEMENTS
-------------

BASE:
- Adds link partner settings reporting when available
- Adds QSA support (in conjunction with QSA VPD)
- Adds T520-BT LED support
- Reports NOTSUPPORTED for modules with an unhandled identifier

DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs

FOiSCSI:
- Add support for multiple iSCSI DDP client
- Sends DHCP renew request when lease expires

================================================================================

22.2. T4 Firmware
+++++++++++++++++

Version : 1.14.4.0
Date    : 08/05/2015
================================================================================

FIXES
-----

BASE:
- Fixes a potential initialization error when accessing a configuration file
  stored on the flash.
- Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and
  register dumps could result in errors.

ETH:
- Fixes an issue that sometimes prevented the link from coming up in CR adapters.

ENHANCEMENTS
------------

BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.

ETH:
- Adds new interface to allow the driver to query the VI rss table base
  addresses.

OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
  and rcv scale factors.

================================================================================
================================================================================

Version : 1.13.32.0
Date    : 03/25/2015
================================================================================

FIXES
-----

BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
    negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
    adapter configurations)
- Fixes config file based PL_TIMEOUT register programming

ETH:
- Fixes a potential EO UDP SEG header corruption

OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1

FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.

ENHANCEMENTS
------------

ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE

OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software

================================================================================
================================================================================

Version : 1.12.25.0
Date    : 10/22/2014
================================================================================

FIXES
-----

BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested

DCBX:
- Fixes an issue where some settings were not being sent to the switch
  correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
  FW
- Fixes a firmware crash on DCBX APP information request before link up

FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT

ENHANCEMENTS
------------

BASE:
- Adds link partner settings reporting when available
- Firmware now reports NOTSUPPORTED for modules with an unhandled identifier

DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs

FOiSCSI:
- Adds support for multiple iSCSI DDP clients
- Sends DHCP renew request when lease expires

================================================================================

Obtained from:	Chelsio Communications
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
 2015-08-05 19:45:11 +00:00
Navdeep Parhar
c7dbd80213 cxgbe(4): Update T4 and T5 firmwares to 1.14.2.0. 
Obtained from:	Chelsio Communications
MFC after:	3 days
 2015-07-14 08:02:05 +00:00
Navdeep Parhar
88998d7afc Improve compliance with style.Makefile(5). 
MFC after:	2 weeks
 2014-08-01 01:30:16 +00:00
Navdeep Parhar
327235b3d6 cxgbe(4): Update the bundled T4 and T5 firmwares to versions 1.11.27.0. 
Obtained from:	Chelsio
MFC after:	3 days
 2014-06-22 23:40:20 +00:00
Navdeep Parhar
48d05478bf cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0 2013-10-14 21:25:07 +00:00
Navdeep Parhar
f72b68a1bf - Include the T5 firmware with the driver. 
- Update the T4 firmware to the latest.
- Minor reorganization and updates to the version macros, etc.

Obtained from:	Chelsio
MFC after:	1 day
 2013-07-03 23:52:15 +00:00