Both "product" and "build" ordering are rampant in /usr/src. This document
is not indented to be as strict as style(9) as historically BSD hasn't been
as consistent about Makefile as C code. Also there are too many variations,
exceptions and allowances in out existing Makefile style to be strict.
However there is a general level of consensus on what the general BSD style
of our Makefiles is. This manpage documents that "smell".
o Give the proper spelling for WARNS.
o Clarify using NO_WERROR.
o Embelish -D after -I verbage.
o Document preference of ${.ALLSRC} & ${.TARGET} vs. $< & $@.
Based on: brucification
various functions of the card. Be pedantically careful to use 'station
firmware' when talking about the version of Prism firmware.
As always, word-smithing welcome.
MFC-After: Tom Rhodes wakes up and notices :-)
and other localized keys.
MFC candidate pending re@ approval.
Contributed by: Gruppo Utenti FreeBSD Italia (www.gufi.org)
No-reply-from: ache
MFC after: 3 days
Always use sys/conf/kern.mk when building kernel/modules.
<bsd.kern.mk> is only preserved for sys/boot/pc98/boot2
for now, but this will be fixed. If there are other
users of <bsd.kern.mk>, please let me know.
Reminded by: bde
o Expand on MAC policy enforcement on network interfaces
o Add cross-references to su(1) and setfsmac(8) where appropriate
o Comment out mmap revocation sysctls as they are a bit too experimental
o Add the standard BUGS section
Prompted by: rwatson
Sponsored by: DARPA, Network Associates Laboratories
labels"
o Remove the ++ compartment range notation example as this has not yet
been merged into CVS.
o Include a "Runtime Configuration" section listing all of the relevant
sysctl knobs for this policy.
Sponsored by: DARPA, Network Associates Laboratories
Obtained from: TrustedBSD Project
another subsection, but I'm not quite sure where yet. Right now it's just
the configurable bits.
- Move the label format off into another subsection to match other labeling
policy man pages.
- Make the sample range label look like the form specified.
Sponsored by: DARPA, Network Associates Laboratories
Obtained from: TrustedBSD Project
More work likely needs to happen. This describes things better than
the old "this man page intentionally left blank" style man page that
I'd committed previously.
Nitpickers: comb nits and commit!
freen: imputed typo in original wordlist. I can find no evidence for this
being an actual English word, not even in the OED.
freend: archaic spelling of `friend'. In a modern document, it is far
more likely that this appears as a typo or a dialect word than it does
under the original meaning, so remove it as not to cause false negatives
for spelling checkers.
with vnode interlocks held.
Emphasize that users need to be careful with malloc flags versus mbuf
flags.
Remove stale portion in vnode.9 about v_tag. We don't have it anylonger.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
* Fix a bug where devices weren't cleaned up on close(): CAM_REQ_CMP != 0
user:
* Increase timeout in usermode to CAM_TIME_INFINITY. The initiator is in
charge of timeouts and the value was in ms, not seconds.
* Bring two debugging printfs under the debug flag
* Clean up man page to show increased testing on isp(4)
Submitted by: gibbs (bugfixes)
"Network Associates Labs" in the copyright notice.
o Remove clause #3 in the license terms.
o Remove the line break from my name.
Sponsored by: DARPA, Network Associates Laboratories
my fingers are getting tired. Here is a new manual page, 'development',
which describes a very powerful, generic, exportable development environment
suitable to developers, sysops, admins, and anyone at all who is
maintaining more the one FreeBSD box. I have used this type of environment
for many years and have had to make virtually no changes to it for all that
time.
MFC after: 3 days
o Correct the range of compartments (1..256 instead of 0..255)
o Use the correct name for "Network Associates Laboratories"
MFC Candidate.
Sponsored by: DARPA, Network Associates Laboratories
Reviewed by: Adam Migus <adam@migus.org>
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
solution is worked out to clarify more specific compartment-related
cases.
Submitted by: dcs
Sponsored by: DARPA, Network Associates Labs
Approved by: re (blanket)
o None: Stub policy
o Seeotheruids: The "see processes and sockets owned by other users" policy
o Test: Debugging policy
Standardize the SYNOPSIS and HISTORY sections.
Update SEE ALSO sections.
it, so don't suggest it. It's likely going away soon also, so avoid
believing it's supported.
Suggested by: Sean Kelly <smkelly@zombie.org>
Approved by: re
that we do MP on more than just i386, and add some cross-references.
This is far from a perfect update, but at least it's a start. More
will no doubt follow.
Reviewed by: jhb
Approved by: re
o Biba: A data integrity policy
o BSD Extended: Support for the firewall-like access controls (ugidfw(8))
o MLS: Multi-level security, a confidentiality policy
(These files originally lived in src/share/man/man9)
Approved by: re (blanket)
Sponsored by: DARPA, Network Associates Labs
Obtained from: TrustedBSD Project
This mostly consists of functionality to serialize accesses to
the two ATA channels (which can also be used to "fix" certain
PCI based controllers).
Add support for Acard controllers.
Enable the ATA driver in PC98 GENERIC, and add device hints.
Update man page with latest support.
The PC98 core team has kindly provided me with a PC98
machine that made this all possible, thanks to all that
contributed to that effort, without that this would
probably newer have been possible..
Approved by: re@
the file system initial labeling policy exists in userland, and is
fed into setfsmac(1). This is based on the old LOMAC PLM.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
The /usr/bin/perl wrapper isn't solving many of the problems it was
imported to deal with. There are limitations to it that don't have a
clear "fix".
Reviewed by: markm, kris
Extorted approval from: re(jhb)
Revert to using the .Tn POSIX and .Tn ANSI instead of \*[Px] and \*[Ai]
strings; using these strings is unsafe in troff mode, as they include a
change in a font size.
Approved by: re
for the -static flag instead when constructing LIBPAM.
(This fixes false warnings from ``make checkdpadd -DNOSHARED'' in
lib/libpam/modules/.)
Submitted by: bde, ru
Approved by: re
device ppc
and
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
in /boot/device.hints to configure the ppc device.
Reviewed by: trhodes, ru
Approved by: re@ (rwatson)
This code allows a user program to enable target mode on a SIM and
then emulate any number of devices (disks, tape drives, etc.) All
decisions about device behavior (UA, CA, inquiry response) are left
to the usermode program and the kernel driver is merely a conduit
for CCBs. This enables multiple concurrent target emulators, each
using its own backing store and IO model.
Also included is a user program that emulates a disk (RBC) using a
file as a backing store. This provides functionality similar to
md(4) at the CAM layer.
Code has been tested on ahc(4) and should also work on isp(4) (and
other SIMs that gain target mode support). It is a complete rewrite
of /sys/cam/scsi_target* and /usr/share/examples/scsi_target.
Design, comments from: gibbs
Supported by: Cryptography Research
Approved by: re
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.
We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)
Not yet linked to the build
Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>
Approved by: re
NAI.
Add cautionary notes on the experimental status of the MAC Framework
in FreeBSD 5.0.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Replace ARC4 with SHA2-512.
Change lock-structure encoding to use random ordering rather for obscurity.
Encrypt lock-structure with AES/256 instead of AES/128.
Change kkey derivation to be MD5 hash based.
Watch for malloc(M_NOWAIT) failures and ditch our cache when they happen.
Remove clause 3 of the license with NAI Labs consent.
Many thanks to "Lucky Green" <shamrock@cypherpunks.to> and "David
Wagner" <daw@cs.berkeley.edu>, for code reading, inputs and
suggestions.
This code has still not been stared at for 10 years by a gang of
hard-core cryptographers. Discretion advised.
NB: These changes result in the on-disk format changing: dump/restore needed.
Sponsored by: DARPA & NAI Labs.
largely submitted by bde. Return our exemption of the #ifdef lint
comments since the exemption is intended to handle a particularly
common current case without mandating change. Improve language and
spelling, and slightly clarify the notions associated specifically
with #elif.
Obtained from: bde
This is NOT YET CONVERTED TO -current.
This node is a source for preprogrammed packets at a known rate for testing.
I will convert it to -current "in place" but will MFC teh original
pre-conversion variant as that is what is originally submitted.
Man page my me, info from Dave's README.
Submitted by: Dave Chapeskie <dchapeskie@SANDVINE.com>
Obtained from: Sandvine inc.
MFC after: 1 week
Abuse .for so that the variable expansion works inside the N modifier.
This won't be a simple abuse with the next version of bsd.doc.mk
which will support multi-value PRINTERDEVICE.
Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.
Only create _stamp.extra when necessary.
Get rid of SOELIMPP and OBJS.
Use Groff version of soelim(1); we need its -I option
for the following to work.
Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.
The closing comment is required only for long conditionally defined
code sections, with the exception of lint cases. Attempt to document
also the logic for using '!' before the SOMETIMESSOMETHGINGHERE.
The goal of these comments is to make complex cases more
comprehensible, not to require them in all cases. The rules here are
derived from behavior used in 90+% of the kernel source code.
Reviewed by and discussed with: jhb, bde, mike
linking.
* Fix disorder in the SEE ALSO sections of aio_*(2).
* Remove unnecessary cross-references from the SEE ALSO sections of
aio_*(2); config(8), kldload(8) and kldunload(8) are cross-referenced
from aio(4).
* Remove the KERNEL OPTIONS sections from aio_*(2), now that these
pages cross-reference aio(4), which contains suitable kernel linking
reference material.
associated with the TrustedBSD MAC Framework, as well as some credits
to developers and contributors.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
a server process bound to a wildcard UDP socket to select the IP
address from which outgoing packets are sent on a per-datagram
basis. When combined with IP_RECVDSTADDR, such a server process can
guarantee to reply to an incoming request using the same source IP
address as the destination IP address of the request, without having
to open one socket per server IP address.
Discussed on: -net
Approved by: re
which may surprise developers coming from Solaris, or other platforms
which have a similar interface, but slightly different rules.
Reviewed by: jhb, ru
to creating the tags file using ctags(1). Defaults to "gtags".
Made GTAGSFLAGS and HTAGSFLAGS overrideable, added CTAGSFLAGS.
Folded bsd.prog.mk version of `tags' into bsd.dep.mk.
PR: bin/42852
o describe additional argument in driver callbacks
o describe flow-control mechanism for processing crypto requests
o remove old cruft
o remove openbsd-specific cruft
o fixup some references
o yada yada ...
Fix the "@gprel relocation against dynamic symbol xxx" linker error.
Variables defined in the link unit and small enough to be put in the
short data section will have a gp-relative access sequence (using the
@gprel relocation). It is invalid to have @gprel relocations in shared
libraries, because they are to be resolved by the static linker and
not the dynamic linker. The -fpic option will cause @ltoff relocations
for @gprel relocations, but the side-effects are untested (if any).
Instead, disable/eliminate the short data section to achieve the same.
One bug fixed: Use getmicrouptime() to trigger reseeds so that we
cannot be tricked by a clock being stepped backwards.
Express parameters in natural units and with natural names.
Don't use struct timeval more than we need to.
Various stylistic and readability polishing.
Introduce arc4rand(void *ptr, u_int len, int reseed) function which
returns a stream of pseudo-random bytes, observing the automatic
reseed criteria as well as allowing forced reseeds.
Rewrite arc4random() in terms of arc4rand().
Sponsored by: DARPA & NAI Labs.
In "nroff" mode, italic font renders as an underlined text, which
makes it indistinguishable from the bold text on color monitors
(cons25 terminal type), yet it requires the less(1)'s -R option.
(Refer to the new grotty(1) manpage for details.)
So turn off the color support for now (when generating catpages),
until we figure out what do we do with this new feature. I have
a patch for grotty(1) that tells it to use the "reverse video"
attribute to render the italic font. Once this is accepted, we
can turn color support back on (if there won't be any objections
from the community).
This reduces the size of GENERIC's text space by 73999 bytes (about 2%).
The bloat is from approximately 3437 strings longer than 31 characters
being padded to a 32-byte boundary.
o Make it possible to prevent parts of the tree from being linted
(say) during a 'make world' by setting NOLINT in a leaf Makefile.
o Make "make lint" work (better) for executable programs.
o Clean up (nuke!) a syntax damaged pipeline.
lowest value in order to get the right MACHINE_CPU values since setting
CPUTYPE can result in problems later in the buildkernel case. Instead,
set MACHINE_CPU directly and leave CPUTYPE alone.
Tested by: mbr
Capitalize the first letter of the descriptions for the entries in the ERRORS
section if they are complete sentences and end the sentences with periods.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
and adjacent tokens in declarations.
The added text was originally a single sentence I wrote and which
was heavily modified and extended by Bruce Evans.
This clarification attempt originates from differing usage of the
'restrict' type-qualifier.
Although various documents documents dicussing the C Programming
Language put a space between an asterisk and the 'restrict' keyword,
including the C99 standard (at least the n869.txt draft) and other
ISO/IEC JTC1/SC22/WG14 documents, the IEEE Std 1003.1-2001 document
does not separate them.
Discussed with: bde
Requested by: tjr
Separation using a single space also liked by: mike
which became wrong after using do { } while (0) became recommended.
Move the definition of what braces are to their new first occurrence.
Reviewed by: bde
we don't use two-letters names already many years.
2) Make xterm-color just plain alias to xterm instead of unnecessary
reduplication of color capabilities already exist in xterm entry.
ev6 or pca56 etc this downgrades the cpu specification passed to gas.
As a result, gas will fail when gcc generates media instructions (in
uipc_usrreq.c). This only affects what gas will accept, not what gcc
generates or what our *.s file contain.
Fix device hints entry for disabling acpi(4).
This also should fix the arbitration with apm(4) when both drivers
are enabled.
Note that your /boot/device.hints needs to be updated if you want to
stop auto-loading acpi.ko or disable acpi(4).
3 bytes (ut:) seems too long for kterm-color. There is a limitation
of buffer size within 1024 bytes in our ncurses.
Submitted by: mistral@imasy.or.jp
Reviewed by: matusita
MFC after: 1 day
by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
bsd.cpu.mk doesn't have to worry about compilers other than the current
version.
- Allow TARGET_CPUTYPE to override CPUTYPE in bsd.cpu.mk.
- Treat an empty CPUTYPE the same as an undefined CPUTYPE.
- For buildworld, buildkernel, etc., define TARGET_CPUTYPE to CPUTYPE for
native builds and define it to be empty for cross-builds.
TARGET_CPUTYPE is only defined if it is not already defined via the
commandline or environment.
- To minimize whitespace changes, remove a test that didn't define
_CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined
since it is redundant (we don't use _CPUCFLAGS if those are defined).
to tune for more advanced processors while still supporting the minimum
processor in an architecture. We can do this with the '-mtune=' option
to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu='
option for i386.
This defaults to tuning i386 builds for i686 machines though not using
any instructions that aren't found on an 80386. For alpha it defaults
to tuning for an EV5.
Approved by: peter
Peril sensitive sunglasses borrowed from: peter
http://www.ietf.org/rfc/rfc2401.txt), IPsec is the right word and
already in the dictionary.
PR: in part docs/38668
Reviewed by: murray
MFC after: 10 days
since apparently people were missing that you aren't supposed to access
the name buffer following namei() unless you specify one of these flags.
Pointed out by: green
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
including documenting that ucreds must not be pulled out of thin air,
when to use td_cred vs. p_ucred, how to avoid race conditions in
credential updates, and why to use p_ucred when targetting a thread
or process in an access control operation involving two processes.
Reviewed by: julian, jhb (earlier revision)
these days, and the average user expects ^A and arrow keys to work, however
if they know nothing of editing modes, they will think sh(1) just sucks. It
is likely that because of defaults on most systems and with most shells that
anyone who actually wants vi(1) editing mode will have 'set -o vi'. This
won't affect existing accounts, this way, of course. Only accounts with
.shrc from new etc/skel will be affected. This is much better than making
the change in sh(1).
now needs to set COPY=-C as -C is no longer compatible with the -d
option. It is also likely to be renamed to INSTALL_COPY soon.
Update documentation to reflect this change.
PR: bin/40724
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
mi_switch(9) is still wildly innacurate. I suggest that every kernel
developer takes 20 minutes a day for the next few days and updates one or
two of his favourite chapter 9 man pages as they are now WAY out of date
in general. I will add a couple of KSE related pages soon.
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
PR: 38096
Submitted by: Chris Pepper <pepper@rockefeller.edu>
While I'm here correct some typos pointed out by ispell.
Approved by: sheldonh (mentor)
MFC after: 1 week
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
try to avoid ambiguous cases in the future.
Wording approved by: julian (early draft), grog, rwatson, wes and maybe other
members of core I'm forgetting.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...
Not fully tested (by me) yet.
Submitted by: Mark Santcroos <marks@ripe.net>
MFC after: 3 weeks
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
Do not use raw roff requests.
Replace tbl(1)'s use with the mdoc(7)'s -column list.
Removed cross references to non-existing manpages.
Minor markup nits.
'manck' from ports does just about everything these tools ever did.
(I did have these 90% working about 5 years ago, but manck came along.....)
The only file of interest might be sp.ignore, but it can be pulled
from the attic if anyone has that much interest.
Inspired by: Mark Murray's deletion of share/man/man0
softlink to /var/tmp.
This is horribly wrong since /tmp and /var/tmp serve different goals.
Even given the text that in the old days things were different doesn't help,
since our scripts clean /tmp, and we depend on /var/tmp to persist for
vi editing sessions recovery and other likewise applications.
documentation) hasn't had its nappies changed since FreeBSD-2.0, and
is now starting to smell rather ripe.
Its dependant on ancient and removed tools, and the last maintainer
can't remember looking at it 1 1/2 years ago.
If we need it, its in the Attic.
Discussed with: asmodai
permissions to use for alias and map database files built by
/etc/mail/Makefile. The default is 0640 to assist users in avoiding
a file locking local denial of service.
MFC after: 1 day
pending RE approval
back to -fformat-extensions (or whatever) when we have the functionality.
We are gaining warnings again that should be fixed but the are being hidden
by NO_WERROR and all the -Wformat noise.
Apparently binding only to 127.0.0.1 inside of a jail actually binds
to the jail IP address as well (in effect, bind to all available
interfaces in the jail).
Submitted by: Helge Oldach <test-smtp@oldach.net>
MFC after: 1 day
pending RE approval
Obtained from: mark
Pointy hat to: grog
Change msU macros to mU.
This is only a partial solution; the whole issue of building the
documentation needs to be revisited.
01.cacm 02.implement 03.iosys 04.uprog 06.Clang 15.yacc 16.lex 17.m4
Some of these produce a number of warnings. I don't want to remove
them yet, because some noble soul may decide to remove the cause of
the warnings, but they won't if it doesn't bite them.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD. This one was relatively easy, though it
still contains obscenities.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD.
This one's a real mess. It's full of undefined macros, and in one
place deliberately causes syntax warnings. I've decided against
taking out the undefined macros: they don't alter the format of the
output document, and maybe one day somebody will put in the macro
definitions.
Note that this file corrects a number of format errors which appear in
the O'Reilly 4.4BSD manual set.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD. This was relatively complicated: the
original text used the msU macros, which are available in a number of
different kinds. This version uses a number of mm-like macros,
including AL and BL, which just aren't available in ms, and the msU
macros I've found (even the ones in 4.4BSD) don't have them either. I
replaced them with ms constructs, which makes it format better than
the O'Reilly document, but I wasn't able to get the table of contents
(ms doesn't have that facility).
Add a prominent comment that this is not a reference for any modern
version of C.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing. In addition, the
pagination is not correct, with the result that some .DS/.DE blocks
leave large amounts of white space empty before them. Possibly this
could be fixed by putting the (blank) footnotes at the end.
PR: 35345
Requested by: Tony Finch <fanf@dotat.at>
This does not use the standard build macros for two reasons:
1. There's more than one document (paper and appendix).
2. The standard build macros need revision anyway (we shouldn't need
to set variables to get PostScript output, it should be a separate
target).
If anybody feels offended by this breach of style, feel free to fix
it.
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
PR: 37796
Submitted by: drs@rucus.ru.ac.za
MFC after: 1 week
Note, I don't usually look after pppd (just ppp), so I haven't
removed the ftp and ingres users as I guess they're there for
a reason....
Move the code that I have not yet finished documenting into the
`IMPLEMENTATION NOTES' section.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as
demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this
theme.
o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where
appropriate.
o Fix type IBBS -> IBSS
for VOP_GETATTR() and VOP_SETATTR(), reference VOP_NULL() to suggest
clearing all of *vap with it before setting specific values. Cross
reference VFS(9). Indicate that failure modes are possible from
VOP_GETATTR() and that an errno value is returned.
Submitted by: Hiten Pandya <hiten@uk.FreeBSD.org>
o go ahead and document ibss-master and ibss modes, since there are
patches in the pipeline to support them.
o Note that they aren't implemented yet.
o Note that different regulatory domains have different default
channels.
o Note that Lucent cards prior to firmware 6.0.4 do not support
ibss mode, and only support the older demo ad-hoc mode.
o Note that PRISM2 chipsets do not support WDS mode of operation
(the mysterious -p 2 option).
Change date to today.
Add socket low power WLAN CF card
Add SMC 2602W which I use all the time
Comment out the create-ibss example. FreeBSD doesn't yet have that
media option. Also change it to master-ibss since that's what OpenBSD
really uses (and that is a change in their man page too)
however I'm adding the Dlink DWL520 as supported from OpenBSD. Also
adding Dlink DWL650 since I have one in my hot little hands and it
works great.
# I suspect that OpenBSD needs this too :-)
heavily on OpenBSD's wi man page, with OpenBSDisms replaced by
FreeBSDisms. I also added a note about where the man page came from.
I hope that I've not broken anything that ru cleaned up. We now run
this through tbl, but that appears to be automatic.
Obtained From: OpenBSD
in progress, and should not have been committed in revision 1.114.
This broke gnu/usr.bin/binutils/strip and usr.bin/strip makefiles;
they were now attempting to install and strip "strip" from objdir.
Pointed out by: bde
This has nothing to do with PR misc/37516.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
1. The committer refused to respond to questions over the commit.
2. The servers rlogind, rshd, rexecd were not wrapped.
3. "rcmnds" as an abbreviation gets an order of magnitude less hits on
Google than the much more well known "rcmds".
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
alternative MTAs. Therefore, always install rc.sendmail, regardless of
NO_SENDMAIL make.conf setting. Users can still set mta_start_script to a
different script.
This commit is after a repo-copy of src/etc/sendmail/rc.sendmail to
src/etc/rc.sendmail.
Noticed by: Calvin NG <calvinng@brel.com>
MFC after: 3 days
bsd.own.mk as of share/mk/sys.mk,v 1.60.
I did not notice this because I tested with DESTDIR=/foo/5.0,
and the "exists(/foo/5.0)" test apparently succeeded.
Reported by: fenner
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
incorrect, however, as Dennis Ritchie states ``Actually the acronym is "block
started by symbol." It was a pseudo-op in FAP (Fortran Assembly Program), an
assembler for the IBM <models> machines. It identified its label and set
aside space for a given number of words.''
PR: 34088
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
MFC after: 2 days
the .mc file used for /etc/mail/submit.cf. By default,
/etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner
Submitted by: ume
MFC after: 1 week
indeed a good change, I shouldn't have made it after testing
with the -DNOCLEAN buildworld. There are far too many users
of this misfeature under sys/boot/. I will reapply the change
after I fix these.
This change has been tested with the clean buildworld.
Make the defined(SRCS) case similar to the !defined(SRCS)
case - only define ${PROG}: ${OBJS} if the ${PROG} target
does not exist. This has only one precedence in the entire
source tree, usr.bin/doscmd, and its Makefile is horribly
broken. I will temporarily unconnect it from build until
I'm working on the fix.
Remove need_resched as it no longer exists.
Cleanup the text for other functions that have changed out from under
their descriptions.
This page needs to be reviewed again after things settle down a bit.
Reviewed by: jhb
To do this you need to have each top-end connected as well.
IP can be routed and other protocols get bridged..
Also useful when bridgeing two networks while merging them as
machines will work with both old and new netmasks. (well mostly).
clientmqueue (submit mail queue).
The new mailq display is only active if both the old
daily_status_mailq_enable is set to "YES" and the new
daily_status_include_submit_mailq is set to "YES" so people who disabled
440.status-mailq won't have any surprises.
Likewise, the new queue run is only active if both the old
daily_queuerun_enable is set to "YES" and the new daily_submit_queuerun
is set to "YES" so people who disabled 500.queuerun won't have any
surprises.
While I am here, remove the [ ! -d /var/spool/mqueue ] checks from
both scripts as the queue directory isn't always /var/spool/mqueue for
the main daemon -- it can be set to anything in the sendmail.cf file.
MFC after: 1 week
have the __FBSDID() macro in <sys/cdefs.h>. Fix this once and for all
for tools that need to be bootstrapped.
PR: bin/36747
MFC after: 3 days
Prodded by: obrien
the .PATH (but not in the ${.OBJDIR}) would result in a leak of
the ${OBJS}: ${SRCS:M*.h} dependency hint.
Spotted by: fixing the broken gnu/usr.bin/cc/cc1obj build
MFC after: 1 day
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
This file contains FreeBSD/Unix lexicon that is used by the system
documentation. It makes a great ispell(1) personal dictionary to
supplement the standard English language dictionary, and can be used
to greatly reduce the number of false positives when spell checking
share/man/*, www/*, or doc/*
Discussed with: ru, obrien
MFC after: 2 weeks
(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
* Document the LOCAL_SCRIPT option.
* Document the NOPORTREADMES option.
* Be more specific in a comment.
* Be more specific about the ftp.1 and cdrom.1 targets.
* Clarify the usage of the CVSROOT variable.
* Clarify the usage of the NODOC variable.
Suggested by: matusita
about the TARGET_ARCH variable. (1)
Add information about the DESTDIR variable.
Add more examples for cross-building.
(1) Submitted by: ru
MFC after: 3 days
* Remove trailing whitespace at EOL.
* Various grammar cleanups.
* Note that MAKE_ISOS is disabled by default.
* Use more descriptive mdoc markup.
* Use proper references for the online FDP documents.
Submitted by: dd
Specifically, this documents the available targets and relevant
environment variables for "make release". LOCAL_PATCHES,
RELEASEDISTFILES, RELEASENOUPDATE, etc.. are covered.
A future commit should add more information about drivers.conf,
boot_crunch.conf, and other less well-known aspects of the release
build.
Reviewed and history section added by: phk
argument. Don't fail silently, but let savecore(8) make noise. It
won't behave badly, it doesn't need protection.
At the same time, allow the administrator to have dumpdev enabled
while dumpdir (savecore(8)) is disabled and document how to do it.
PR: conf/35725
install PicoBSD on hard disks and CDROM images, and on the
bootstrap sequence and the places where you can customise
a PicoBSD image.
Now if some of the -doc guys want to put this stuff in a nice
handbook page, that would be extremely useful!
