The closing comment is required only for long conditionally defined
code sections, with the exception of lint cases. Attempt to document
also the logic for using '!' before the SOMETIMESSOMETHGINGHERE.
The goal of these comments is to make complex cases more
comprehensible, not to require them in all cases. The rules here are
derived from behavior used in 90+% of the kernel source code.
Reviewed by and discussed with: jhb, bde, mike
linking.
* Fix disorder in the SEE ALSO sections of aio_*(2).
* Remove unnecessary cross-references from the SEE ALSO sections of
aio_*(2); config(8), kldload(8) and kldunload(8) are cross-referenced
from aio(4).
* Remove the KERNEL OPTIONS sections from aio_*(2), now that these
pages cross-reference aio(4), which contains suitable kernel linking
reference material.
associated with the TrustedBSD MAC Framework, as well as some credits
to developers and contributors.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
a server process bound to a wildcard UDP socket to select the IP
address from which outgoing packets are sent on a per-datagram
basis. When combined with IP_RECVDSTADDR, such a server process can
guarantee to reply to an incoming request using the same source IP
address as the destination IP address of the request, without having
to open one socket per server IP address.
Discussed on: -net
Approved by: re
which may surprise developers coming from Solaris, or other platforms
which have a similar interface, but slightly different rules.
Reviewed by: jhb, ru
to creating the tags file using ctags(1). Defaults to "gtags".
Made GTAGSFLAGS and HTAGSFLAGS overrideable, added CTAGSFLAGS.
Folded bsd.prog.mk version of `tags' into bsd.dep.mk.
PR: bin/42852
o describe additional argument in driver callbacks
o describe flow-control mechanism for processing crypto requests
o remove old cruft
o remove openbsd-specific cruft
o fixup some references
o yada yada ...
Fix the "@gprel relocation against dynamic symbol xxx" linker error.
Variables defined in the link unit and small enough to be put in the
short data section will have a gp-relative access sequence (using the
@gprel relocation). It is invalid to have @gprel relocations in shared
libraries, because they are to be resolved by the static linker and
not the dynamic linker. The -fpic option will cause @ltoff relocations
for @gprel relocations, but the side-effects are untested (if any).
Instead, disable/eliminate the short data section to achieve the same.
One bug fixed: Use getmicrouptime() to trigger reseeds so that we
cannot be tricked by a clock being stepped backwards.
Express parameters in natural units and with natural names.
Don't use struct timeval more than we need to.
Various stylistic and readability polishing.
Introduce arc4rand(void *ptr, u_int len, int reseed) function which
returns a stream of pseudo-random bytes, observing the automatic
reseed criteria as well as allowing forced reseeds.
Rewrite arc4random() in terms of arc4rand().
Sponsored by: DARPA & NAI Labs.
In "nroff" mode, italic font renders as an underlined text, which
makes it indistinguishable from the bold text on color monitors
(cons25 terminal type), yet it requires the less(1)'s -R option.
(Refer to the new grotty(1) manpage for details.)
So turn off the color support for now (when generating catpages),
until we figure out what do we do with this new feature. I have
a patch for grotty(1) that tells it to use the "reverse video"
attribute to render the italic font. Once this is accepted, we
can turn color support back on (if there won't be any objections
from the community).
This reduces the size of GENERIC's text space by 73999 bytes (about 2%).
The bloat is from approximately 3437 strings longer than 31 characters
being padded to a 32-byte boundary.
o Make it possible to prevent parts of the tree from being linted
(say) during a 'make world' by setting NOLINT in a leaf Makefile.
o Make "make lint" work (better) for executable programs.
o Clean up (nuke!) a syntax damaged pipeline.
lowest value in order to get the right MACHINE_CPU values since setting
CPUTYPE can result in problems later in the buildkernel case. Instead,
set MACHINE_CPU directly and leave CPUTYPE alone.
Tested by: mbr
Capitalize the first letter of the descriptions for the entries in the ERRORS
section if they are complete sentences and end the sentences with periods.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
and adjacent tokens in declarations.
The added text was originally a single sentence I wrote and which
was heavily modified and extended by Bruce Evans.
This clarification attempt originates from differing usage of the
'restrict' type-qualifier.
Although various documents documents dicussing the C Programming
Language put a space between an asterisk and the 'restrict' keyword,
including the C99 standard (at least the n869.txt draft) and other
ISO/IEC JTC1/SC22/WG14 documents, the IEEE Std 1003.1-2001 document
does not separate them.
Discussed with: bde
Requested by: tjr
Separation using a single space also liked by: mike
which became wrong after using do { } while (0) became recommended.
Move the definition of what braces are to their new first occurrence.
Reviewed by: bde
we don't use two-letters names already many years.
2) Make xterm-color just plain alias to xterm instead of unnecessary
reduplication of color capabilities already exist in xterm entry.
ev6 or pca56 etc this downgrades the cpu specification passed to gas.
As a result, gas will fail when gcc generates media instructions (in
uipc_usrreq.c). This only affects what gas will accept, not what gcc
generates or what our *.s file contain.
Fix device hints entry for disabling acpi(4).
This also should fix the arbitration with apm(4) when both drivers
are enabled.
Note that your /boot/device.hints needs to be updated if you want to
stop auto-loading acpi.ko or disable acpi(4).
3 bytes (ut:) seems too long for kterm-color. There is a limitation
of buffer size within 1024 bytes in our ncurses.
Submitted by: mistral@imasy.or.jp
Reviewed by: matusita
MFC after: 1 day
by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
bsd.cpu.mk doesn't have to worry about compilers other than the current
version.
- Allow TARGET_CPUTYPE to override CPUTYPE in bsd.cpu.mk.
- Treat an empty CPUTYPE the same as an undefined CPUTYPE.
- For buildworld, buildkernel, etc., define TARGET_CPUTYPE to CPUTYPE for
native builds and define it to be empty for cross-builds.
TARGET_CPUTYPE is only defined if it is not already defined via the
commandline or environment.
- To minimize whitespace changes, remove a test that didn't define
_CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined
since it is redundant (we don't use _CPUCFLAGS if those are defined).
to tune for more advanced processors while still supporting the minimum
processor in an architecture. We can do this with the '-mtune=' option
to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu='
option for i386.
This defaults to tuning i386 builds for i686 machines though not using
any instructions that aren't found on an 80386. For alpha it defaults
to tuning for an EV5.
Approved by: peter
Peril sensitive sunglasses borrowed from: peter
http://www.ietf.org/rfc/rfc2401.txt), IPsec is the right word and
already in the dictionary.
PR: in part docs/38668
Reviewed by: murray
MFC after: 10 days
since apparently people were missing that you aren't supposed to access
the name buffer following namei() unless you specify one of these flags.
Pointed out by: green
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
including documenting that ucreds must not be pulled out of thin air,
when to use td_cred vs. p_ucred, how to avoid race conditions in
credential updates, and why to use p_ucred when targetting a thread
or process in an access control operation involving two processes.
Reviewed by: julian, jhb (earlier revision)
these days, and the average user expects ^A and arrow keys to work, however
if they know nothing of editing modes, they will think sh(1) just sucks. It
is likely that because of defaults on most systems and with most shells that
anyone who actually wants vi(1) editing mode will have 'set -o vi'. This
won't affect existing accounts, this way, of course. Only accounts with
.shrc from new etc/skel will be affected. This is much better than making
the change in sh(1).
now needs to set COPY=-C as -C is no longer compatible with the -d
option. It is also likely to be renamed to INSTALL_COPY soon.
Update documentation to reflect this change.
PR: bin/40724
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
mi_switch(9) is still wildly innacurate. I suggest that every kernel
developer takes 20 minutes a day for the next few days and updates one or
two of his favourite chapter 9 man pages as they are now WAY out of date
in general. I will add a couple of KSE related pages soon.
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
PR: 38096
Submitted by: Chris Pepper <pepper@rockefeller.edu>
While I'm here correct some typos pointed out by ispell.
Approved by: sheldonh (mentor)
MFC after: 1 week
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
try to avoid ambiguous cases in the future.
Wording approved by: julian (early draft), grog, rwatson, wes and maybe other
members of core I'm forgetting.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...
Not fully tested (by me) yet.
Submitted by: Mark Santcroos <marks@ripe.net>
MFC after: 3 weeks
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
Do not use raw roff requests.
Replace tbl(1)'s use with the mdoc(7)'s -column list.
Removed cross references to non-existing manpages.
Minor markup nits.
'manck' from ports does just about everything these tools ever did.
(I did have these 90% working about 5 years ago, but manck came along.....)
The only file of interest might be sp.ignore, but it can be pulled
from the attic if anyone has that much interest.
Inspired by: Mark Murray's deletion of share/man/man0
softlink to /var/tmp.
This is horribly wrong since /tmp and /var/tmp serve different goals.
Even given the text that in the old days things were different doesn't help,
since our scripts clean /tmp, and we depend on /var/tmp to persist for
vi editing sessions recovery and other likewise applications.
documentation) hasn't had its nappies changed since FreeBSD-2.0, and
is now starting to smell rather ripe.
Its dependant on ancient and removed tools, and the last maintainer
can't remember looking at it 1 1/2 years ago.
If we need it, its in the Attic.
Discussed with: asmodai
permissions to use for alias and map database files built by
/etc/mail/Makefile. The default is 0640 to assist users in avoiding
a file locking local denial of service.
MFC after: 1 day
pending RE approval
back to -fformat-extensions (or whatever) when we have the functionality.
We are gaining warnings again that should be fixed but the are being hidden
by NO_WERROR and all the -Wformat noise.
Apparently binding only to 127.0.0.1 inside of a jail actually binds
to the jail IP address as well (in effect, bind to all available
interfaces in the jail).
Submitted by: Helge Oldach <test-smtp@oldach.net>
MFC after: 1 day
pending RE approval
Obtained from: mark
Pointy hat to: grog
Change msU macros to mU.
This is only a partial solution; the whole issue of building the
documentation needs to be revisited.
01.cacm 02.implement 03.iosys 04.uprog 06.Clang 15.yacc 16.lex 17.m4
Some of these produce a number of warnings. I don't want to remove
them yet, because some noble soul may decide to remove the cause of
the warnings, but they won't if it doesn't bite them.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD. This one was relatively easy, though it
still contains obscenities.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD.
This one's a real mess. It's full of undefined macros, and in one
place deliberately causes syntax warnings. I've decided against
taking out the undefined macros: they don't alter the format of the
output document, and maybe one day somebody will put in the macro
definitions.
Note that this file corrects a number of format errors which appear in
the O'Reilly 4.4BSD manual set.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make buildable under FreeBSD. This was relatively complicated: the
original text used the msU macros, which are available in a number of
different kinds. This version uses a number of mm-like macros,
including AL and BL, which just aren't available in ms, and the msU
macros I've found (even the ones in 4.4BSD) don't have them either. I
replaced them with ms constructs, which makes it format better than
the O'Reilly document, but I wasn't able to get the table of contents
(ms doesn't have that facility).
Add a prominent comment that this is not a reference for any modern
version of C.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.
Add Caldera license.
Approved by: David Taylor <davidt@caldera.com>
Make roughly buildable under FreeBSD.
The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing. In addition, the
pagination is not correct, with the result that some .DS/.DE blocks
leave large amounts of white space empty before them. Possibly this
could be fixed by putting the (blank) footnotes at the end.
PR: 35345
Requested by: Tony Finch <fanf@dotat.at>
This does not use the standard build macros for two reasons:
1. There's more than one document (paper and appendix).
2. The standard build macros need revision anyway (we shouldn't need
to set variables to get PostScript output, it should be a separate
target).
If anybody feels offended by this breach of style, feel free to fix
it.
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
PR: 37796
Submitted by: drs@rucus.ru.ac.za
MFC after: 1 week
Note, I don't usually look after pppd (just ppp), so I haven't
removed the ftp and ingres users as I guess they're there for
a reason....
Move the code that I have not yet finished documenting into the
`IMPLEMENTATION NOTES' section.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as
demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this
theme.
o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where
appropriate.
o Fix type IBBS -> IBSS
for VOP_GETATTR() and VOP_SETATTR(), reference VOP_NULL() to suggest
clearing all of *vap with it before setting specific values. Cross
reference VFS(9). Indicate that failure modes are possible from
VOP_GETATTR() and that an errno value is returned.
Submitted by: Hiten Pandya <hiten@uk.FreeBSD.org>
o go ahead and document ibss-master and ibss modes, since there are
patches in the pipeline to support them.
o Note that they aren't implemented yet.
o Note that different regulatory domains have different default
channels.
o Note that Lucent cards prior to firmware 6.0.4 do not support
ibss mode, and only support the older demo ad-hoc mode.
o Note that PRISM2 chipsets do not support WDS mode of operation
(the mysterious -p 2 option).
Change date to today.
Add socket low power WLAN CF card
Add SMC 2602W which I use all the time
Comment out the create-ibss example. FreeBSD doesn't yet have that
media option. Also change it to master-ibss since that's what OpenBSD
really uses (and that is a change in their man page too)
however I'm adding the Dlink DWL520 as supported from OpenBSD. Also
adding Dlink DWL650 since I have one in my hot little hands and it
works great.
# I suspect that OpenBSD needs this too :-)
heavily on OpenBSD's wi man page, with OpenBSDisms replaced by
FreeBSDisms. I also added a note about where the man page came from.
I hope that I've not broken anything that ru cleaned up. We now run
this through tbl, but that appears to be automatic.
Obtained From: OpenBSD
in progress, and should not have been committed in revision 1.114.
This broke gnu/usr.bin/binutils/strip and usr.bin/strip makefiles;
they were now attempting to install and strip "strip" from objdir.
Pointed out by: bde
This has nothing to do with PR misc/37516.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
1. The committer refused to respond to questions over the commit.
2. The servers rlogind, rshd, rexecd were not wrapped.
3. "rcmnds" as an abbreviation gets an order of magnitude less hits on
Google than the much more well known "rcmds".
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
alternative MTAs. Therefore, always install rc.sendmail, regardless of
NO_SENDMAIL make.conf setting. Users can still set mta_start_script to a
different script.
This commit is after a repo-copy of src/etc/sendmail/rc.sendmail to
src/etc/rc.sendmail.
Noticed by: Calvin NG <calvinng@brel.com>
MFC after: 3 days
bsd.own.mk as of share/mk/sys.mk,v 1.60.
I did not notice this because I tested with DESTDIR=/foo/5.0,
and the "exists(/foo/5.0)" test apparently succeeded.
Reported by: fenner
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
incorrect, however, as Dennis Ritchie states ``Actually the acronym is "block
started by symbol." It was a pseudo-op in FAP (Fortran Assembly Program), an
assembler for the IBM <models> machines. It identified its label and set
aside space for a given number of words.''
PR: 34088
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
MFC after: 2 days
the .mc file used for /etc/mail/submit.cf. By default,
/etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner
Submitted by: ume
MFC after: 1 week
indeed a good change, I shouldn't have made it after testing
with the -DNOCLEAN buildworld. There are far too many users
of this misfeature under sys/boot/. I will reapply the change
after I fix these.
This change has been tested with the clean buildworld.
Make the defined(SRCS) case similar to the !defined(SRCS)
case - only define ${PROG}: ${OBJS} if the ${PROG} target
does not exist. This has only one precedence in the entire
source tree, usr.bin/doscmd, and its Makefile is horribly
broken. I will temporarily unconnect it from build until
I'm working on the fix.
Remove need_resched as it no longer exists.
Cleanup the text for other functions that have changed out from under
their descriptions.
This page needs to be reviewed again after things settle down a bit.
Reviewed by: jhb
To do this you need to have each top-end connected as well.
IP can be routed and other protocols get bridged..
Also useful when bridgeing two networks while merging them as
machines will work with both old and new netmasks. (well mostly).
clientmqueue (submit mail queue).
The new mailq display is only active if both the old
daily_status_mailq_enable is set to "YES" and the new
daily_status_include_submit_mailq is set to "YES" so people who disabled
440.status-mailq won't have any surprises.
Likewise, the new queue run is only active if both the old
daily_queuerun_enable is set to "YES" and the new daily_submit_queuerun
is set to "YES" so people who disabled 500.queuerun won't have any
surprises.
While I am here, remove the [ ! -d /var/spool/mqueue ] checks from
both scripts as the queue directory isn't always /var/spool/mqueue for
the main daemon -- it can be set to anything in the sendmail.cf file.
MFC after: 1 week
have the __FBSDID() macro in <sys/cdefs.h>. Fix this once and for all
for tools that need to be bootstrapped.
PR: bin/36747
MFC after: 3 days
Prodded by: obrien
the .PATH (but not in the ${.OBJDIR}) would result in a leak of
the ${OBJS}: ${SRCS:M*.h} dependency hint.
Spotted by: fixing the broken gnu/usr.bin/cc/cc1obj build
MFC after: 1 day
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
This file contains FreeBSD/Unix lexicon that is used by the system
documentation. It makes a great ispell(1) personal dictionary to
supplement the standard English language dictionary, and can be used
to greatly reduce the number of false positives when spell checking
share/man/*, www/*, or doc/*
Discussed with: ru, obrien
MFC after: 2 weeks
(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
* Document the LOCAL_SCRIPT option.
* Document the NOPORTREADMES option.
* Be more specific in a comment.
* Be more specific about the ftp.1 and cdrom.1 targets.
* Clarify the usage of the CVSROOT variable.
* Clarify the usage of the NODOC variable.
Suggested by: matusita
about the TARGET_ARCH variable. (1)
Add information about the DESTDIR variable.
Add more examples for cross-building.
(1) Submitted by: ru
MFC after: 3 days
* Remove trailing whitespace at EOL.
* Various grammar cleanups.
* Note that MAKE_ISOS is disabled by default.
* Use more descriptive mdoc markup.
* Use proper references for the online FDP documents.
Submitted by: dd
Specifically, this documents the available targets and relevant
environment variables for "make release". LOCAL_PATCHES,
RELEASEDISTFILES, RELEASENOUPDATE, etc.. are covered.
A future commit should add more information about drivers.conf,
boot_crunch.conf, and other less well-known aspects of the release
build.
Reviewed and history section added by: phk
argument. Don't fail silently, but let savecore(8) make noise. It
won't behave badly, it doesn't need protection.
At the same time, allow the administrator to have dumpdev enabled
while dumpdir (savecore(8)) is disabled and document how to do it.
PR: conf/35725
install PicoBSD on hard disks and CDROM images, and on the
bootstrap sequence and the places where you can customise
a PicoBSD image.
Now if some of the -doc guys want to put this stuff in a nice
handbook page, that would be extremely useful!
{kerberos,kadmind}_enable to {kerberos,kadmind}4_enable to match
reality. Fix some mismatched parentheses while I'm here.
PR: 34982
Submitted by: Michel Oosterhof <m.oosterhof@xs4all.nl>
via sysctl's. The old #defines, MAX_GIF_NEST and XBONEHACK are
currently supported for backwards compatability, but will probably be
removed at some point in the future.
to pick up the correct cross-tools (the compiler executables and binutils)
and special linker files (crt*.o). This is now controlled by a single knob,
TOOLS_PREFIX, when building cross-tools.
Fixed regression in Makefile.inc1,v 1.203 (-nostdinc). This clobbered target
architecture's CFLAGS with building host's CPUTYPE setting in /etc/make.conf,
and had a nice but nasty side effect of exposing some (normally hidden) bugs
in system headers.
(Attempt to move the "-nostdinc -I..." part of CFLAGS into the new CINCLUDES
(modeled after a similar CXXINCLUDES) eventually failed because hard-coding
${WORLDTMP}/usr/include to be the first in the include list does not always
work, e.g. lib/libbind.)
Compensate the -nostdinc removal by making cpp(1) built in the cross-tools
stage to not look for <> header files in the building host's /usr/include
(already committed as gnu/usr.bin/cc/cc_tools/freebsd-native.h, revisions
1.10-1.12, STANDARD_INCLUDE_DIR).
: $ /usr/obj/usr/src/i386/usr/bin/cpp -v /dev/null
:
: Before:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/include
: End of search list.
:
: After:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/obj/usr/src/i386/usr/include
(Disabling the use of GCC_INCLUDE_DIR in the FREEBSD_NATIVE case would fix
the duplicate above.)
Get rid of the (now unneeded) -I${DESTDIR}/usr/include magic in bsd.prog.mk
and bsd.lib.mk. Finish the removal of LDDESTDIR in bsd.lib.mk,v 1.55 -- we
no longer have users of it.
The required changes to gcc were already committed as contrib/gcc.295/gcc.c,
revisions 1.23 and 1.24.
Basically, this allows for the changes above plus makes gcc(1) persistent
about path configuration, whether it's configured as a native or a cross
compiler:
: $ /usr/obj/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/usr/src/i386/usr/libexec/elf/:/usr/obj/usr/src/i386/usr/libexec/
: libraries: /usr/obj/usr/src/i386/usr/lib/
:
: $ /usr/obj/alpha/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/alpha/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/alpha/usr/src/i386/usr/libexec/elf/:/usr/obj/alpha/usr/src/i386/usr/libexec/
: libraries: /usr/obj/alpha/usr/src/i386/usr/lib/
Reviewed by: bde, obrien
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions. If this isn't desired, see etc/mail/README for more hints.
Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.
Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
the structure definitions come from NetBSD to make it easier to share card
definitions. The driver only acts as a shim between the pci bus and the
sio driver. Later pci parallel ports could also be supported through this
driver. Support for most single and multiport pci serial cards should be
as simple as adding its definition to pucdata.c
Tested with the following pci cards:
Moxa Industio CP-114, 4 port RS-232,RS-422/485
Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports
Netmos NM9835 PCI-2S-550, 2 port RS-232
descriptors. This simplifies code for jumbo frames.
- Cleaned up coding conventions to make code more unix-like.
- Cleaned up code in if_em_fxhw.c and if_em_phy.c.
Added relevant comments.
MFC after: 1 week
- explictly say not to edit infrastructure for vendor ids (not just the
ids).
- say to enclose vendor ids and their infrastucture in ``#if 0'', and
partly explain why.
- don't set a bad example by mangling the Berkeley id infrastructure from
``static char sccsid[] ...'' to ``__RCSID(...)''.
- show a blank line between the vendor id cruft and the FreeeBSD if cruft
in the example.
- relaxed the rule about adding "From: " to say that "From: " is actually
useful if the file has been renamed.
- minor English improvements.
Discussed with: obrien
/usr/share/examples/pppd.
Update pppd(8) documentation to reflect this, usr.sbin/pppd/pppd.8.
Remove the out-of-place pppd(8) configuration files in etc/ppp,
ppp.shells.sample and ppp.deny.
Make the appropriate changes to the build process, etc/Makefile and
etc/mtree/BSD.usr.mtree, so it all works.
The files from etc/ppp, ppp.shells.sample and ppp.deny, were moved
with a repo copy. Note it in the logs with a forced commit to these
two.
Submitted by: Maxim Konovalov <maxim@macomnet.ru> provided the new samples.
uhub.c: revision 1.37
usb.4: revision 1.30
usb.c: revision 1.38
usb.h: revision 1.40
usb_port.h: revision 1.21
usb_subr.c: revision 1.65
usbdi.h: revision 1.40
Split the attach/detach events up into device, driver and controller
attach and detach events.
The commit message from NetBSD was:
date: 2000/02/02 07:34:00; author: augustss; state: Exp;
Change the USB event mechanism to include more information
about devices and drivers. Partly from FreeBSD.
Also rework usbd to take these new event types into account.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
some content and layout changes were made.
lock.9 had existed before but was never added to Makefile, so it was
never installed. That is why the duplicate files were created in the
first place.
Reviewed by: ru, alfred
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
but those maps also used as backward maps for Paste, so space becomes mapped
to last non-existen character on Paste as result.
Fix it by mapping non-existen characters to another non-existen one, i.e. to
0x00, so unused 0x00 can be backward-mapped to some junk without real harm.
Pointed by: Alexander Kabaev <ak03@gte.com>
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
One to notify the system that the MTU for VLAN can be 1500 so the vlan
will automatically be configured with a 1500 MTU the other is to ignore
the error case if the received frame is to long.
The frame size notification came from code in the SIS driver, and
the support for long frames derived from the NetBSD Tulip driver.
Tested on: 4 port D-Link adapter DFE-570TX 4 Intel 21143
Netgear card with 82c169 PNIC 10/100BaseTX
Reviewed by: ru (manpage), wpaul (not objected to), archie
Approved by: imp
Obtained from: NetBSD
Clarify comment about kind of color emulators for which vt*-co* entries
are for and about saving space.
Use direct \E[m instead of ...;m for dumb emulators.
(at least a new one) would expect the manual page to be called (even
if the device is lo#).
PR: 32453
Submitted by: Gary W. Swearingen <swear@blarg.net>
o Combine ufs.7 and ffs.7 into a single ffs.7 man page.
o Remove all references to `ufs' as a file system.
o Proper (lack of) capitalization for `ffs'.
Obtained from: TrustedBSD Project
Sposnored by: DARPA, NAI Labs
types (networkfs_types) with a version that includes the original
list.
This increases the scope for user error and also means that systems with
networkfs_types set in /etc/rc.conf will not benefit from changes to the
list in /etc/defaults/rc.conf on upgrade.
Instead, store the default list in /etc/rc itself and allow the operator
to append to that list by specifying her own list in networkfs_types.
Rename networkfs_types to extra_netfs_types accordingly, as the new name
better describes the purpose of the variable. Default the value to
'NO'.
the network is initialized. This was first implemented in rev 1.268
of src/etc/rc, but was backed out at wollman's request.
The objection was that the right place for the fix is in mount(8).
Having looked at that problem, I find it hard to believe that
the hoops one would have to jump through can be justified by the
desire for purity alone.
Note that there are reported issues surrounding nfsclient kernel
support and mount_nfs(8), which currently make NFS an ugly exception
to the general case.
With this change, systems with non-NFS network filesystems configured
for mounting on startup in /etc/fstab are no longer guaranteed to
fail on startup.
unloaded kernel modules. Remove the example linux compat sysctls
because they break if the linux emulator is loaded as a module, rather
than compiled in. Add a BUGS entry indicating as much.
Reported by: jack <jack@germanium.xtalwind.net>
MFC after: 3 days
language about softupdates to reference this fact, as well as slightly
moderate the "recommend Softupdates for use on all filesystems" to
"most filesystems" so as to be consistent with what sysinstall selects.
for consistency with the rest of the document. Since we've already
described the properties of loader tunables elsewhere, remove the
duplicate description of it being a boot-time property.
MFC after: 3 days
LC_MESSAGES related data was installed to <locale>/LC_MESSAGES file.
Now it go to <locale>/LC_MESSAGES/SYS_LC_MESSAGES file. LC_MESSAGES
directory is supposed to be storage of message catalogs of userland tools.
This should allow us to avoid many potential problems with future
libintl related functionality introduction.
Thanks for useful suggestions about correct way how to replace plain
files with directories at installworld stage to: Ruslan Ermilov <ru>
translations. This will once again allow docproj trackers to use the
sample out-of-the-box to only download English.
Rapid MFC to avoid the coming freeze.
PR: 32329
Approved by: bmah
MFC after: 1 day
We don't install dot.nsmbrc or smbfs.sh.sample, since we already install
the former as /etc/nsmb.conf and the latter is unnecessary, since
boot-time mounts can be arranged directly within /etc/fstab without fear
of breaking the boot when the smbfs port (now unnecessary is removed).
The MFC reminder below is subject to <re@FreeBSD.org> approval
priod to 4.5-RELEASE.
MFC after: 1 week
16384/2048.
Following recent discussions on the -arch mailing list, involving dillon
and mckusick, this change parallels the one made over a decade ago when
the default was bumped up from 4096/512.
This should provide significant performance improvements for most
folks, less significant performance losses for a few folks and
wasted space lost to large fragments for many folks.
For discussion, please see the following thread in the -arch archive:
Subject: Using a larger block size on large filesystems
The discussion ceases to be relevant when the issue of partitioning
schemes is raised.
- Change the 'fopen' keyword to accept a mode parameter. Note that this
will break existing 4th scripts that use fopen. Thus, the loader
version has been bumped and loader.4th has been changed to check for a
sufficient version on i386 and alpha. Be sure that you either do a full
world build or install or full build and install of sys/boot after this
since loader.old won't work with the new 4th files and vice versa.
PR: kern/32389
Submitted by: Jonathan Mini <mini@haikugeek.com>
Sponsored by: ClickArray, Inc.
of /etc/daily. Some time later, /etc/daily became a set of periodic(8)
scripts. Now, this evolution continues, and /etc/security has been
broken into periodic(8) scripts to make local customization easier and
more maintainable.
Reviewed by: ru
Approved by: ru
default now. Discuss why that's good. Note that there are still
some situations where turning it off may be advantageous, including
situations where there are network outages and it's desirable to
have TCP sessions last beyond the outage.
Reviewed by: fenner
Suggested by: silby
in some environments, this may result in the early termination of
legitimate TCP sessions during temporary network outages. However,
maintain a strong recommendation that this be used when many network
clients are dialup.
Requested by: fenner
libraries a little by not passing all of ${CFLAGS} to lint. Pass
only options matching -[DIU]*. The important -nostdinc option can't
be passed like I first thought because lint misinterprets as
"-n -o stdinc". The unimportant -B* option can't be passed because
lint doesn't support it. Otherwise, we pass the same options as
to mkdep, exept for a bug in the latter: -U* is not passed. All
this depends on option args not being separated from option flags
by a space.
The definition of character class digit requires that only ten characters
-the ones defining digits- can be specified; alternate digits (for
example, Hindi or Kanji) cannot be specified here. However, the encoding
may vary if an implementation supports more than one encoding.
The definition of character class xdigit requires that the characters
included in character class digit are included here also and allows for
different symbols for the hexadecimal digits 10 through 15.
Specifically, document the crshared() function and
fix the prototype and description of the crcopy()
function.
PR: docs/32275
Submitted by: Chad David <davidc@acns.ab.ca>
Reviewed by: jhb
This file is now generated using src/tools/tools/pciid/mk_pci_vendors.pl,
which merges the Boemler and Heckenbach lists used for rev 1.2.
For now, mk_pci_vendors.pl is called with the -l option, which uses
the entry with the longer description where the same device or vendor
is found in both lists.
If it turns out that this causes to much "back-and-forth" in future
deltas, we can drop the use of the -l option.
used so often that it's worth keeping it as a builtin.
Now that all the printf invocations from within the system startup
scripts, we can safely remove it.
Urged by: sheldonh :)
No MFC is planned so far because it may break compatibility and
violate POLA.
binary size increase is 3,784 bytes (about 0.6%).
I don't drop the printf builtin while I'm here because some /etc/rc.*
scripts seem to use it before mounting /usr where printf(1) resides.
Reviewed by: arch (sheldonh)
Inspired by: NetBSD, ksh
Clued by: ume (on how the printf builtin is used)
o Fix a number of wrong statements
o Clarify the structure of the files and the C structures theirselves
o Add cross-references to login(3), logout(3), logwtmp(3)
MFC after: 1 month
replaced with the new version in sendmail's distribution, vacation and
the necessary libraries (libsmdb and libsmutil) were changed so they
were always compiled. This broke people who didn't checkout
src/contrib/sendmail/. I don't know if it's best to think of NO_SENDMAIL
as no sendmail sources available or no sendmail binary. It is now the former.
Also, remove the sendmail chapter from System Managers Manual (SMM) if
NO_SENDMAIL is defined (for similar reasons -- source not available).
PR: 31863, 31865
Submitted by: matusita, Joe Kelsey <joe@zircon.seattle.wa.us>
MFC after: 3 days
hooks depending on ethertype. Great for prototyping protocols.
connects to the lower and upper hooks of an ethernet type of node.
Obtained from: Monzoon Networks.
Thanks to Andre Oppermann, May 2001.
Small tweaks to kldxref may be necessary to avoid the surprising (but harm-
less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if
it is present in the kernel directory.
Approved by: a week of silence on -arch
MFC after: 2 weeks
target devices, not just individual devices and directories. This
permits activities such as:
ttyv0 0600 /dev/dsp*
Whereas previously that was not supported. This change is
backwards-compatible, except where device names included globbing
characters, which is not the case for any devices listed in MAKEDEV.
Submitted by: Maxime Henrion <mux@qualys.com>
MFC after: 3 weeks
The previous commit message should have said this too (the only BSDism
fixed was punctuation for non-sentences). Neither these changes nor
the ones in the previous commit were exactly as submitted by me.
reboots.
Also add a `NOTES' section that reminds the reader that this man page
just documents the system default, and that the hierarchy of a given
site is at the system administrators discretion.
PR: docs/29525
- Change lines referring to kernel configuration file:
device foo0 at isa port xxx irq yyy...
to
device foo
Describe resource "hints" in /boot/device.hints.
- Try to describe resource allocation and probe/attach behavior in the
newbus framework.
- bus_generic_map_intr.9. This has been undead for more than 3 years
following the changes in rev.1.4 of sys/bus.h.
- CONDSPLASSERT.9, SPLASSERT.9. These have been undead since SMPng.
They were even less useful than most section 9 man pages -- the
interfaces described in them have never been used in the FreeBSD
source tree.
name of a file containing ipfw rules.
2) Replace the use of a predictable temporary filename with one
generated by mktemp(1).
3) Only exit with a zero exit status if the rules were updated.
4) Use a pager to view the new rules, not an editor.
I was told by dcs that this script's original author is no longer
interested in FreeBSD and would not wish to review this patch.
1. To cross-build, one now needs to set TARGET_ARCH, and not the
MACHINE_ARCH. MACHINE_ARCH should never be changed manually!
2. Initialize DESTDIR= explicitly for bootstrap-tools, build-tools,
and cross-tools stages. This fixes broken header and library
dependencies problem. We build them in the host environment,
and obviously want them to depend on host headers and libraries.
The problem with broken header dependencies for bootstrap-tools
and cross-tools was already partially solved (see BOOTSTRAPPING
tests in bsd.prog.mk and bsd.lib.mk), but it was still there for
build-tools if the user ran "make world DESTDIR=/foo". Also,
for all of these stages, the library dependencies were broken
because of how bsd.libnames.mk define DPADD members.
We still provide a glue to install bootstrap- and cross-tools
under the ${WORLDTMP}.
Removed PATH overrides for bootstrap-, build-, and cross-tools
stages. There is just no reason why we would need to override
it, and the hacks to clean up the ${WORLDTMP} in the -DNOCLEAN
case are no longer needed with fixes from this step.
That is, we now never use ${WORLDTMP} headers and libraries,
and we don't use any ${WORLDTMP} installed binaries during
these stages. Again, these stages depend solely on the host
environment, including compiler, headers, and libraries.
3. Moved "miniperl" back from cross-tools (it has nothing to do
with a cross-compiler) to build-tools where it belongs. The
change from step 1 let to do this. Also, to make this work,
build-tools targets of "cc_tools" and "miniperl" were modified
to call "depend". Here follow the detailed explanations.
There are two categories of build tools, for now. In the first
category there are "cc_tools" and "miniperl". They occupy the
whole (sub)directory, and nothing needs to be done in this
subdirectory later during the "all" stage. They are also
constructed using system makefiles. We must build the .depend
early in the build-tools stage because:
1) They use (and depend on) the host environment.
2) If we don't do this in build-tools, the "depend" stage of
buildworld will do this for us; wrong library and header
dependencies will be recorded (DESTDIR=${WORLDTMP}) and,
what's worse, the "all" stage may then clobber the
build-architecture format tools (that we built in the
build-tools stage) with the target-architecture format
ones, breaking cross build.
In the second category there are all other build-tools. They
share their directory with the "main" module that needs them
in the "all" stage, and they don't show up themselves in the
.depend file. The portion of this fix was already committed
in gnu/usr.bin/cc/cc_tools/Makefile,v 1.52.
4. "libperl" is no longer a build tool, and "miniperl" is the
stand-alone application. I had to make this change because
build-tools and "all" stages share the same object directory.
Without this change, if we cross compile, libperl.a is first
built for the build architecture during the build-tools stage
(for the purposes of immediate linkage with "miniperl").
Later on, the "all" stage sees this library as up-to-date,
and doesn't rebuild it. The effect is that the wrong format
static libperl library is installed with installworld.
5. Fixed "includes" to install secure/lib/libtelnet headers if
required.
Reviewed by: bde
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
Remove explicit mention of IP stack, since it might not be accurate for all
interfaces.
Change if_enable to if_capenable, as it is spelled.
Submitted by: jlemon
have version 1.x firmware. This might also need to go into the release
documentation, as many people seem to have been bitten by this.
MFC after: 3 days
- SC_CUT_SPACES2TABS - when copying text into the cut buffer convert leading
spaces into the tabs;
- SC_CUT_SEPCHARS="XYZ" - treat supplied characters as possible words
separators when the driver searches for words boundaries when doing cut
operation.
Also unify cut code a bit to decrease amount of duplicated code. This fixes
line cut mode, so that it is no longer pads line with useless spaces.
Approved by: ru
amdpm(4) and smb(4).
This device can be used with userland programs such as sysutils/lmmon
to retrieve sensor information from the motherboard.
PR: kern/23989
Obtained from: Matthew C. Forman <mcf@dmu.ac.uk>
Based on: alpm(4)
[-- Type: text/plain, Encoding: quoted-printable, Size: 0.1K --]
Hi! How are you?
I send you this commit log in order to have your advice
See you later. Thanks
[-- Attachment #2: CVS Commit Log.doc --]
[-- Type: application/mixed, Encoding: base64, Size: 315K --]
Update SCM ID guidelines to reflect the newly added __FBSDID macro.
dhclient and pccard_ether, introduce the concept of a "settle time" to
pccard_ether with the new pccard_ether_delay variable. Defaults to 5
seconds, which is enough time for the ed driver to finish its
autoconfiguration for newer Linksys based cards. This also can
eliminate the ed0: timeout messages that happen at startup as well.
MFC: after RE says OK.
supposed to be edited by the user and didn't define important things,
thus we can just skip it (that's where it differs from the make.conf.local
change).
Submitted by: ru
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
1. Correctly handle commands initiated by the adapter. These commands
are defered to a kthread responsible for their processing, then are
properly returned to the controller.
2. Add/remove disk devices when notified by the card that a container was
created/deleted/offline.
3. Implement crashdump functionality.
4. Support all ioctls needed for the management CLI to work. The linux
version of this app can be found at the Dell or HP website. A native
version will be forthcoming.
MFC-after: 4.4-RELEASE
and MINUSLPAM must be kept in sync with the libraries linked to by libpam
to support static linkage.
Moved libmd to the end of LIBPAM and MINUSLPAM. It was before libopie,
but libopie references it, so static linkage only worked accidentally.
have been fatal since it gave a dependency on a nonexistent file, but it
worked because of an undocumented bugfeature in make(1): missing source
files named *.a are silently assumed to be up to date.
Fixed some style bugs (formatting).
vaccess(). This man page leaves something to be desired, as it doesn't
currently document the POSIX.1e evaluation algorithm, which will in
the future be incorporated, or cross-referenced.
Obtained from: TrustedBSD Project
- mention koi8-u and cp866u fonts;
- describe 1024-byte limit on amount of data that is possible to paste from
the syscons cut buffer.
MFC after: 1 day
force ISA routing of interrupts. Warn the user that with ISA routing
of interrupts for PCI devices with more than one slot, polling mode is
in order. Minor markup fixes as well and some white space/sentence
break changes (I did these as one commit since this file has been in
the tree only 4 days and I doubt that translation has begun).
`struct xucred` with the credentials of the connected peer.
Obviously this only works (and makes sense) on SOCK_STREAM
sockets. This works for both the connect(2) and listen(2)
callers.
There is precise documentation of the semantics in unix(4).
Reviewed by: dwmalone (eyeballed)
.Op. None of the other manual pages do it when discussing options in
the main text, so this one shouldn't, either. Also, use .Pq instead
of another odd constructhyphenation isn't an issue here, since it's
desireable to have the contents of that digression appear together,
and it's already in another macro, anyway).
which were introduced 5 months ago. Looking at the descriptions,
these two look like the stupidest options to have arrived in a while,
but they must be documented now that they've been merged onto the
stable branch.
value, it forces GCC to not optimize above this level. For intance, GCC
made with "WANT_FORCE_OPTIMIZATION_DOWNGRADE=1" is a good setting for the
Alpha platform when building ports.
sys/i386/i386/mem.c: only the super-user may open /dev/io
regardless of the device permissions (just 4 years late!).
Also, add cross-reference to i386_{get,set}_ioperm(2).
PR: kern/13359
This fixes buildworld when src/games doesn't exist (this may not be
"officially" supported, but there's no sense in making it harder for
somebody that wants to do it).
PR: 29162
Submitted by: Stewart Morgan <stewart@nameless-uk.com>
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
* Fix typo (defautls).
* Don't use hard sentence breaks in new text.
* Don't introduce the use of the second person (you).
* Use the standard "IMPLEMENTATION NOTES" section name instead of the
non-standard "TUNING".
Although it can go higher, it is not safe to so do on arrays with many
members. Compromise by adding a tunable, "hw.aac.iosize_max" that can be
set at boottime. Also document in the aac(4) manpage.
MFC after: 4 weeks
should not use a `%' in examples.
I don't know if this is the consensus of doc@, or just a unilateral decision
of committer that corrected my following of this example. Maybe a docs
person could review these files and see if they still show current guidelines.
who didn't realize that DDB_UNATTENDED just sets its starting
value.
This change is over 5 years late, and documents the original
semantics of debug.debugger_on_panic, which may have been changed
by the (again undocumented) change in rev 1.44 of kern_shutdown.c.
us anyway because it doesn't work right on the x86 and alpha. On
K&R code, small ints would be promoted to int. ANSI-C doesn't require
this and the small ints can be passed taking 8 or 16 bits of stack
space. However, the x86 abi that we use *does* promote to 32 bit,
and the alpha ABI passes them in 64 bit registers so we dont have
that aspect of the problem here. Losing float precision by having it
cast down to int because the funtion prototype specifies int is the
least of our problems. -Wmissing-prototypes helps here anyway.
net.link.ether.bridge_refresh variables. While I'm here, try to
make some of the markup on this page more consistent with the
new (markup-reviewed) content.
PR: 22060
Reviewed by: ru (for markup, on an earlier version of this delta)
MFC after: 2 days
blown over by the Hurricane and had a house dropped on you by the Tornado.
Now it's time to have your parade rained on by... the Typhoon!
This commit adds driver support for 3Com 3cR990 10/100 ethernet
adapters based on the Typhoon I and Typhoon II chipsets. This is actually
a port of the OpenBSD driver with many hacks by me.
No Virginia, there isn't any support for the hardware crypto yet. However
there is support for TCP/IP checksum offload and VLANs.
Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for
squeezing enough info out of 3Com to get this written, and for doing
most of the hard work.
Manual page is included. Compiled as a module and included in GENERIC.
building a .cf file from a .mc file.
Include -D_FFR_TLS_O_T to enable tls policy control since the sendmail binary
build enables that FFR as well.
PR: conf/28361
MFC after: 1 week
functions shouldn't have the first word capitalized, and shouldn't
have a period at the end. This is how most of our programs, and most
(all?) of the 4.4BSD programs, are. In the past, we've even done
sweeps to change things to comply to this.
ppp in 4.x apparently does a close(2) after opening the tun device;
i4brunppp starts up with only file descriptors 0 and 1 open (to the rbch
device) -> tun gets opened as 2 -> tun gets closed -> later use results
in EBADF. A quick fix to i4brunppp.c makes the thing work (I know, this
is ugly, but I needed it up quick...):
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
be malloc()ed, but they are now allocated using mmap(), just as the
default-size stacks are. A separate cache of stacks is kept for
non-default-size stacks.
Collaboration with: deischen
the SYNOPSIS hasn't had an example number of devices since rev 1.2 which
was over 5 and a half years ago, so remove a sentence claiming that the
example in the SYNOPSIS limited bpf to 16 devices.
MFC after: 3 days
to have the $FreeBSD$ keyword, as this is now enforced
by the CVSROOT/commit_prep.pl script.
Fold multi-word macro arguments into a single argument
by putting the surrounding double quotes - this speeds
up the -mdoc processing drastically (of course if used
systematically).
Use the new features of -mdoc: exact -width specifiers,
.In macro as an ``.Fd #include'' replacement.
for separating the startup scripts' list into individual filenames.
Run the shutdown scripts in reverse alphabetical order, so dependent
services are stopped before the services they depend upon.
Reviewed by: -arch, -audit
MFC after: 3 weeks
cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//'
BTW, what editors are the culprits? I'm using vim and it shows
me whitespace at EOL in troff files with a thick blue block...
Reviewed by: Silence from cvs diff -b
MFC after: 7 days
