constant controlling expressions: in particular, removing #if 0 sections
is considered "rude". This commit changes the default so that such
things are passed through unchanged, and the old behaviour can be had
with the -k "kill konsts" flag.
Suggested by: markm
MFC after: 3 weeks
variable natively. It should allow you to use any sysctl mib set, but due
to limitations of what I can do with macros, right now it's limited to two,
which is all this program used anyway.
Sponsored by: Bright Path Solutions
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
intent of the Standard.
- Make getconf able to distinguish between configuration variables which
are entirely unknown and those which are merely not defined in the
compilation environment. The latter now get a more appropriate
"undefined\n" result rather than a diagnostic. This may not be
exactly right, but it's closer to the intent of the Standard than
the previous behavior.
- Support ``programming environments'' by validating that the environment
requested with the `-v' flag is the one-and-only execution environment.
(If more environments are supported for some platforms in the future,
multiple getconf(1) executables will be required, but a simple edit in
progenv.gperf will enable automatic support for it.) Document POSIX
standard programming environments.
- Add all of the 1003.1-2001 configuration variables. FreeBSD does not
support all of these (including some that are mandatory); getconf will
later be fixed to break the world should a required variable not be
defined.
As a result of all these changes, gperf is no longer adequate. Keep the
overall format and names of the files for now, to preserve revision history.
Use an awk script to process the .gperf files into C source, which does a
few things that gperf, as a more general tool, cannot do. The keyword
recognition function is no longer a perfect hash function.
This may obviate the need for gperf in the source tree.
- Add a small compile-time regression test to break the build if any of the
.gperf files declare conflicting token sets. (gperf itself would have done
this for the simple case of duplicate tokens in the same input file.)
sbsize. Also, correct the format string in getopt(3) usage to reflect
that -b takes an argument, and correct another case of RLIMIT_SBSIZE
having been forgotten.
whois.apnic.net. To properly receive hints for recursive IP searches,
we convert a buffer to lowercase before searching for magic words.
PR: 42834
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de> (mostly)
X-MFC-After: re approval
gperf's behavior as we ever actually needed here. This generates
a much-less-efficient keyword recognizer, but it's not like that matters
in this application. Makefile changes coming once this passes the world
test.
variable length arguments to a macro. Bump version as this makes DEBUG
statements *always* go to stderr rather than sometimes stdout. There are
a few stragglers, which I will take care of as soon as I can. Mostly these
relate to the need-for-death-of some of the remote job code.
Nearby stylistic nits and XXX added/fixed where appropriate.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
file so that we have a chance of using gcore on non-i386 platforms. Use
linker sets to reduce the registration glue. Remove md-sparc.c, we do not
have an a.out sparc32 port. aoutcore.c was repocopied from gcore.c.
mode, and be more accurate about identifying begin lines so that spurious
ones don't have to be manually edited out, and be more forgiving about
errors so that -c mode is more useful.
is a symbolic link in the PATH pointing back to /usr/bin/perl.
Change WARNS from 6 to 5 to account for the fact that sys/time.h,
included from sys/stat.h, produces a warning when compiled with
-pedantic.
PR: bin/42418
Reviewed by: roberto
1) Include arpa/inet.h for ntohs.
2) Constness fixes.
3) Fix shadowing except for "sin" which shouldn't be in scope.
4) Remove register keyword.
5) Add missing initialsers to user defined structs.
5) Make prototype of netname6 globally visable.
6) Use right macros for printing syncache stats (even though entrie isn't
a word).
Add some constness to avoid some warnings.
Remove use register keyword.
Deal with missing/unneeded extern/prototypes.
Some minor type changes/casts to avoid warnings.
Reviewed by: md5
which fails the make tests (doesn't understand ${notdef:U}) and therefore
fails on __FBSDID in usr.bin/make/*. -DBOOTSTRAPPING is no help here since
this is before we are using the new share/mk/* files, and it would conflict
with the builtin -DBOOTSTRAPPING support later.. so use a different flag.
- Note that the USA has no King.
- Unify spelling "US", not "U.S.".
- Remove USSR holiday (anniversary of the revolution).
- Don't remove claim that the Federal Republic of Germany was founded
in 1953 (22 September). Somebody should clarify if something
reallly did happen on that day.
in USA, not the world first.
Add dates for women's votes in New Zealand.
Add dates for women's votes and rights to political office in South
Australia.
this particular GNU flag. It changes into the given directory for the
operation in question. This just goes into said directory at the time of
parsing the argument for getopt(3).
Submitted by: Rachel Hestilow <rachel@jerkcity.com>
really a problem with utmp/wtmp, but takes the same approach as who(1).
Reviewed by: knu (mentor), mini, silence on -audit
Approved by: knu (mentor), mini
mail filters), the /usr/bin/perl dummy fails since it assumes that the
installed package could be reached via the existing $PATH. Also,
since we are obviously looking for a perl installed by a package, we
should make sure that at least the default package bindir is being
searched.
it complains that it can't do it because the filesystem is readonly.
Assume that when the user has a readonly /dev that they don't care if
login can't change the permissions/flags. While this does break a few
things like msgs, we'll assume that the user setting up the read only
system knows what they are doing.
All this change does is to stop the complaint when the file system is
read only. It also adds comments as to why EROFS and EOPNOTSUPP are
ignored.
This allows one to have a read-only / w/o a /dev MFS and have a
relatively warning-free existence. /etc/rc still complains when it
can't chown/chflags/chmod things, but that's easy to ignore/tweak.
Reviewed by: roberto, phk
Sponsored by: Timing Solutions
via bde. atatat@NetBSD.org made basically the same change in their
version, so bring over their CVS Id which I neglected last time.
Obtained from: bde, Andrew Brown <atatat@NetBSD.org>
the specified time. Previously, rsh could potentially hang indefinitely
at this point even when a timeout was set, for example if the server
accepts the connection and then never sends any reply.
PR: bin/20042
Submitted by: Keith White <Keith.White@site.uottawa.ca>
MFC after: 1 week
1. Update the code to the latest from NetBSD, which includes:
* A new command line option to suppress stat(2) errors
* Output is now done via stdio
* Fixes for bitwise OR'ing of letters
2. Andrew from NetBSD merged in our own Johan's readlink patches.
3. Andrew also merged in some brucifications.
I made some small contributions to the header cleanup, and tried
to generally improve the overall style(9)'ishness. I also documented
the new -q option and added the *LINKS to the Makefile.
All responsibility for mistakes in merging the contributions
from the above is mine.
Obtained from: Andrew Brown <atatat@NetBSD.org>, bde, johan
kill login shell on either "suspend/fg" or "stop $$/fg" for tcsh. Since
this bug occurse on -stable too, it is not kernel threads bug.
Submitted by: David Xu <bsddiy@yahoo.com>
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
holiday on 6 August. Since this claim isn't dependent on the weekday,
I have my strong doubts about the other locations too, but I can't
confirm, so I'm leaving them in.
depend on namespace pollution in <signal.h>. (truss shouldn't be
using timevals anyway, since it was implemented long after timevals
were obsoleted by timespecs.)
1) Define _KERNEL while including sys/time.h to get some function prototypes.
2) Add prototypes and ANSIify definitions.
3) Constness changes.
4) Remove register keyword.
5) Actually return a sensible value from main.
6) Make fread_tail take a void * instead of a char *.
7) Avoid a signedness warning by casting to a size_t. Should be safe
enough 'cos we also check for nonnegativity.
8) Be extra chummy with sigset_t rather than passing a struct to printf
and pretending it is an int.
those of us who want to figure out how old Jim Mock is, but only want to
type 'calendar -f calendar.freebsd'. This is done in a way that should
be totally backwards compatible with no noticable differences, at all.
Reviewed by: mux
MFC after: 4 weeks
we use in sublte ways with relative paths. Until they can be resolved,
back out these changes and put a big comment about why using realpath is
busted.
Approved by: jmallett
MFC After: 100 millifortnights
behaviour of obtaining the affected terminal has changed.
- Refer to the user's terminal instead of the current
terminal session.
- Tell the reader what the utility does when it is invoked
without arguments.
Submitted by: johan
non-default but reasonable values of hz this member overflowed,
breaking NFS over UDP.
Also, as long as I'm plowing up struct sockbuf ... Change certain
members from u_long/long to u_int/int in order to reduce wasted
space on 64-bit machines. This change was requested by Andrew
Gallatin.
Netstat and systat need to be rebuilt. I am incrementing
__FreeBSD_version in case any ports need to change.
xstrdup. There is a crash() function that do cleaning before exiting the
program. The new functions are wrappers that make use of crash() in case
of allocation failure. warn, exit -> err.
Reviewed by: alfred
standard (and easier to define away with support in cdefs.h).
Also convert two function-like macros to static inline functions
for lint and the debugger.
implement any of the useless POSIX-required ``regular shell builtin''
utilities, saving one frag and one inode each. The script moves to
usr.bin/alias which is alphabetically the first of these commands.
- As before, inetd support support is turned of per default.
Code for inetd can be made with -I.
- Support for ``transport monitors'' and the NLSPROVIDER env
variable is still there , even if their use is not clear in
non TLI stream based systems like Free-/NetBSD. It can be activated
with -P.
- There are a few corrections in rpcgen.1 and usage function to conform
to the code. Added and documented -P
- I removed the #ifdefs checks for Free-/NetBSD since we are the only
ones who use this code. MaxOS X may have the same limitations as
we have, so this code will correctly build for them.
- Generate correct cflags.
Submitted by: mbr, Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
PR: bin/29175, misc/27816
is only defined after <bsd.prog.mk> is included, and .if make(1)
conditionals are evaluted on the first pass.
Spotted by: Michael Bretterklieber <mbretter@jawa.at>
This is basically a ``C compilation'' of the former whereis.pl file,
employing the same algorithms, and aiming at being mostly
UI-compatible to the old (legally tainted) 4.3BSD whereis(1). In
comparision, the 4.4BSD-Lite version is just another variant of
which(1) only, where in particular the option to search for source
directories is sorely missing.
While i was at it, i added two more options which i contemplated doing
long since. -x will suppress the run of locate(1) to find sources
that could not be found otherwise, potentially saving a lot of time
(but obviously, risking to not find some sources that are well hidden
in the tree). -q will omit the leading name of the query, so in
particular, you can now do something like:
cd `whereis -qs ls`
I'd explicitly like to thank johan for his review which was quite a
bit more than an average review, including sending me a lot of diffs.
Reviewed by: johan
alphas:
.../elf2aout.c:130: warning: cast increases required alignment of
target type
The warning is about casting ((char *)e + phoff) to a struct pointer,
where e is aligned but phoff might be garbage, so I think the warning
should be emitted on most machines (even on i386's, alignment checking
might be on) and the correct fix would involve validation phoff before
using it.
don't use spaces at the beginning of a line where tabs are normally
used (the worst thing was that half of this file was right (tabs) and
half was wrong (spaces), making for painful reading).
Reviewed by: /sbin/md5, diff -b
(1.12) since the introductions as a common EU currency. Anyway, since
the rate now seems to stabilize just around 1.00, fix up our value
here.
MFC after: 1 day
comsat:
only send two bell charecters if S_IXGRP is set and S_IXUSR is not.
biff:
add new option 'b' to set S_IXGRP.
PR: 10931
Submitted by: Andrew J. Korty <ajk@purdue.edu>
Approved by: sheldonh (mentor)
MFC after: 1 month
the new content size fits into the sbuf, instead of assuming
that allocating twice the old size is enough.
- Use memmove(3) rather than strcpy(3) to copy overlapping
strings.
PR: bin/39930
OpenBSD's implementation lacks -p, and we don't want to
support the option now, only to lose it if/when we later
switch to OpenBSD's implementation.
This functionality is provided by which(1).
Approved by: sheldonh (mentor)
need to know. Instead, check when we are trying to match a "$" address.
This does not change the way sed processes regular files, but makes it behave
more sensibly when used interactively.
PR: 40101
MFC after: 2 weeks
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
This corrects a problem whereby xargs could not walk the environment table
to count the amount of space it used, and treated it as if it were empty.
This problem was introduced in rev 1.15.
MFC after: 2 days
for remaining arguments, rather than checking for *argv being a boolean truth.
Instead of using an empty case to check for -f- to mean "read stdin", and have
stdin reopned otherwise, use a FILE* for the mbox, and assign it to stdin when
we mean to use stdin, otherwise fopen(3). Kill `register' qualifier.
files. The traditional behaviour, 'basename string .suffix', is preserved,
however a suffix may now also be specified via a getopt(3) option, -s, such
that if it is specified in that way, all string arguments follow. There is
also a new flag, -a, which allows a user to say "yes, please basename(3) on
all arguments". Update manual to reflect this unobtrusively.
Reviewed by: obrien
projects/sccs/sccs/, to accompany projects/sccs/sccscmds, and help will
be dying shortly.
These programs will not be a part of 5.0-RELEASE, at least not in their
current form. They'll either end up in src/contrib or ports.
Submitted by: obrien
* add missing Ar macro for one instance of limitflags
* fix indentation problem (not perfect, but then this is one _very_
awkward manpage mark up properly)
(see 'zsh exits upon ^C' thread). This may be temporary be he's been
running it for a year without incident so we should be golden with it.
Approved by: des
enabled, the string '/to:y' will match strings in the To, Cc, and Bcc
header fields. Whereas, '/To:y' will match only the To field. Edit the
manpage and a code comment to indicate the correct behavior.
- removed "Option string values" section and divided up amongst mail
options and environment section
- expanded environment section
- rearranged mail options
- added default values to the mail options for clarification
Reviewed by: ru
instead add the newline when the pattern space is printed. Make the `G' and
`H' commands add a newline to the space before the data, remove bogus
addition of newline from `x' command.
PR: 29790, 38195
consts, ANSIfication of functions, proper use of __FBSDID() and so on.
This commit is non-functional from a code-execution perspective, but
pr(1) now compiles WARNS=6 clean.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
seen (somewhat) in NetBSD. This catches a few extra recursion cases that
could be hidden by expanding a NIL variable causing an existing variable to
be returned (which caused infinite looping and climbing memory usage in at
least one case).
Obtained from: NetBSD (in principle)
executes in the usage() message and manual page. Use "utility" instead of
"command" in both places to emphasise that shell builtins etc. will not work,
and to be consistent with the terminology used by POSIX.
PR: 39210
Submitted by: Danny J. Zerkel <dzerkel@columbus.rr.com>
MFC after: 1 week
- original version of code worked incorrectly when more than one
input files were specified - it was moving the last line from the 1st file
to be the first line of the 2nd, last line of the 2nd to be the first
line of the 3rd and so on;
- use mmap()->write() to create temporary file instead of
malloc()->read()->write(), which was not only slower, but also did not
bother to free allocated memory once backup file was created, potentially
leading to memory exhausting when regex is applied to a big file or a large
number of small ones.
-W is like -A (number of days in the future to consider, but also
specifies that we don't want special treatment at weekends.
-F changes our notion of "Friday" (the day before the weekend).
Arguably, calendar(1) is broken to have special treatment of weekends
by default, but this method maintains POLA.
of ReadMakefile as __unused, it's there because this function is used by
the abstracted list interface which normally deals with item handlers which
take two arguments. Add a missing static prototype.
/usr/src has to carefully watch the Perl port to keep this in sync.
But this is the only way I am allowed to fix the mozzila build
(and other USE_PERL5 ports).
1) It breaks uniq for real life languages when "substitute" directive used in
the collating table.
2) It breaks uniq usage in tool chain with other localized utilities which
use collate.
3) To follow LC_COLLATE it is directly allowed for uniq
by POSIX P1003.1 Draft7 (7.3.2). It means that rev 1.19 gains no additional
POSIX conformance.
supplied rather than arbitrarily larger widths. This (almost) guarantees
that no columns will be truncated (routing table additions between the
width calculation and display passes may create a row with column widths
larger than those calculated).
Sponsored by: NTT Multimedia Communications Labs
not change the code to always do the "GNU" thing, as it's possible people
rely on BSD m4(1) traditionally resetting comment characters in case of no
arguments to the changecom function.
PR: bin/17480 (I think this satisfies the problem report)
are down. Avoid trying to send RPCs to the pidXXX@machine names
used in the special amd(8) mounts.
PR: bin/6183
Submitted by: Petr Lampa <lampa@fee.vutbr.cz>
was initiated at the last character of the line buffer, the Wrong
Thing was done and sed barfed by interpreting the following NUL byte
as a digit. Instead, pull up the next buffer and record that the "\"
was last seen.
than triggering a usage(). Allow -R and -I to be specified in any order, and
thus change how -R checks for -I not being given and triggering a usage().
Partially requested by: gad
The uuidgen command, by means of the uuidgen syscall, generates one
or more Universally Unique Identifiers compatible with OSF/DCE 1.1
version 1 UUIDs.
From the Perforce logs (change 11995):
Round of cleanups:
o Give uuidgen() the correct prototype in syscalls.master
o Define struct uuid according to DCE 1.1 in sys/uuid.h
o Use struct uuid instead of uuid_t. The latter is defined
in sys/uuid.h but should not be used in kernel land.
o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid()
to kern_uuid.c for use in the kernel (currently geom_gpt.c).
o Rename the non-standard struct uuid in kern/kern_uuid.c
to struct uuid_private and give it a slightly better definition
for better byte-order handling. See below.
o In sys/gpt.h, fix the broken uuid definitions to match the now
compliant struct uuid definition. See below.
o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change.
A note about byte-order:
The standard failed to provide a non-conflicting and
unambiguous definition for the binary representation. My initial
implementation always wrote the timestamp as a 64-bit little-endian
(2s-complement) integral. The clock sequence was always written
as a 16-bit big-endian (2s-complement) integral. After a good
nights sleep and couple of Pan Galactic Gargle Blasters (not
necessarily in that order :-) I reread the spec and came to the
conclusion that the time fields are always written in the native
by order, provided the the low, mid and hi chopping still occurs.
The spec mentions that you "might need to swap bytes if you talk
to a machine that has a different byte-order". The clock sequence
is always written in big-endian order (as is the IEEE 802 address)
because its division is resulting in bytes, making the ordering
unambiguous.
Revision 1.10 Sat Oct 14 17:41:55 2000 UTC by bjh21
Don't core dump with an empty format string. Fixes PR#11218.
Patch supplied by Launey Thomas.
Obtained from: NetBSD
* Ensure we work within the array bounds when parsing command-line options;
* Replace h0h0getopt with getopt(3);
* Use consistent whitespace style in the function declarations.
Revieweded by: dwmalone (mentor)
by failing, since comparing up to the length of the key (0) against the
begin line for a key in the help file will always succeed, and print what
is wholly bogus output.
Print usage() if right before executing the specified command, it comes to be
that *argv is NULL (i.e. a flag was specified without a command being given).
if a given make(1) is feature-compatible with a set of makefiles.
When merged, this will be used to replace the ugly upgrade_checks
hacks in src/Makefile.
Version has the RYYYYMMDDX format, where R is from RELENG_<R> and
X allows for 10 distinguishable changes per day.
Discussed with: bde
function that prints when a botched guarded string operation occurs take
two const arguments.
XXX Should we use strlcat/strlcpy instead and hope for the best?
SUS wants (they want the entire suite of SCCS commands, we don't have them,
but we *had* the frontend, so we can have it again, and now).
Add $FreeBSD$ where appropriate, don't revive PSD.doc/spell.ok.
it, which means that relative paths will be expanded to absolute paths, and
filenames without a path will end up with their absolute path included as
well. This aids tremendously in debugging a build using our make(1) with
multiple Makefile's, such as when there is a syntax error in a file in a
sub-directory as per <bsd.subdir.mk>. Normally we'd end up with just
"Makefile" known about the Makefile in question, which means that an error
would be useless for someone trying to debug their build system, now we
end up with a complete real pathname for the Makefile.
So mostly this is useful in a debugging context, but possibly others too
(I haven't thought of them yet, but they probably are more useful if you
make Dir_FindFile use realpath(3), but that's another story).
Reviewed by: -current
MFC after: 2 weeks
returns, exit gracefully with 0.
This fixes the behavior you see when you specify libc.so. It occurs
because ldd(1) itself is linked with libc.so.
$ ldd /usr/lib/libc.so
/usr/lib/libc.so:
ldd: /usr/lib/libc.so: (null)
/usr/lib/libc.so: exit status 1
Reviewed by: silence of audit@
to using arithmatic to determine buffer sizes to encode into.
Diane Bruce pointed out to me that BSD/OS did MIME too, so I want to match
their output, too, since my decision of 8 output groups was wholly arbitrary.
is wrong, even though our C compiler doesn't understand that exit() eats
control of the program, and as such can sometimes complain that main() reaches
the bottom of its body without an explicit return().
Aside from that, the functional usefulness of changing it is effectively nil,
so back it out.
Submitted by: mike
deprecation warning from the utility and manual page. Since this utility
is required by POSIX, it's not likely to be removed any time soon.
This is leading up to the addition of the P1003.1-2001 -s -A -j -N -t options.
PR: 36783
using sizeof() anyway. Use slightly more consistent (per-file) error
reporting for malloc(3) returning NULL. If "malloc failed" was being printed,
don't use err(3). If a NULL format is being used, use err(3). In one case
errx(3) was being used with strerror(3), so just use err(3).
stdout. Unfortunately, DES mfc'ed this change in 1.15.2.1 (this
part probably should not have been) so it is broken there too.
truss is documented to use stderr, and other implementations use stderr.
Submitted by: Arne Dag Fidjestøl <adf@idi.ntnu.no>
* It now knows about the existence of #elif which would have
caused it to produce incorrect results in some situations.
* It can now process #if and #elif lines according to the
values of symbols that are specified on the command line.
The expression parser is only a simple subset of what C
allows but it should be sufficient for most real-world
code (it can cope with everything it finds in xterm).
* It has an option for printing all of the symbols that might
control #if processing. The unifdefall script uses this
option along with cpp -dM to strip all #ifs from a file.
* It has much larger static limits.
* It handles nested #ifs much more completely.
There have also been many style improvements: KNF; ANSI function
definitions; all global stuff moved to the top of the file; use
stdbool instead of h0h0bool; const-correctness; err(3) instead
of fprintf(stderr, ...); enum instead of #define; commentary.
I used NetBSD's unifdef as the basis of this since it has received
the most attention over the years.
PR: 37454
Reviewed by: markm, dwmalone
Approved by: dwmalone (mentor)
MFC after: 3 weeks
marker. Exit non-zero if we cannot open one of the input files. Update
standards conformance and exit status statements in manual page.
PR: 36130
Approved by: mike
mktemp(3). It would be amazingly unlikely, but the former method
could result in a symlink attack. A better solution would use
${TMPDIR}, though.
o Make sed not overwrite old backup files with no warning.
the requested utility. This is how nice(1) traditionall behaved,
and the behaviour required by SUSv3 and POSIX.2 UPE.
Submitted by: Peter Avalos <pavalos@theshell.com> (partially)
Reviewed by: mike
Replace "command" with "utility" in the manual page & source to be more
consistent with the terminology used in the standard, and to hint that
shell builtin commands won't work.
Submitted by: Peter Avalos <pavalos@theshell.com> (partially)
Approved by: mike
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
indicates that not everything worked as expected. Exit non-zero if we
timed out while transmitting or receiving a file or if the file did
not exist, etc.
MFC After: 3 days (re@ willing)
environment variable that specifies the name of the strip(1)
program to use. The envvar is "STRIPBIN". The more natural
choice would be "STRIP", but that one is taken already.
Perl for such things. The key difference to Perl is that a backup extension
*MUST* be specified, because on one hand it isn't recommended to have options
which optionally take a parameter, and on the other hand, it'd be slightly
unpleasent to implement proper handling for that.
The difference between this and the version posted to developers@ is that it
does handle multiple files in argv after the getopt(3) handling "correctly",
in that the inplace editing-specific code has been moved out to a function,
and that function is used beyond the first file in our linked list.
This option has been documented as FreeBSD-specific in the manpage.
Reviewed by: developers@ (got feedback from: des, fanf, sobomax, roberto,
obrien)
MFC after: 1 week
Write status information to stdout instead of stderr.
Exit status when an error occurs musn't be 1, that is reserved for
indicating that messages are disabled.
These changes bring mesg(1) up to SUSv3 conformance.
Reviewed by: mike
back on (and count_win is recreated).
- Create info_win as the same size for all invocations.
PR: 37552
Submitted by: Mark Valentine <mark@thuvia.demon.co.uk>
MFC after: 1 week
the prompt in their native language.
Also make the prompt fit what POSIX asks for (?...).
This should not affect use of -p with yes(1) [as every locale I know of matches
'y' as YESEXPR as well], but that's what -t is for anyway. -p is meant to be
really used interactively.
Submitted by: tjr, jmallett
out the parse loop to a seperate function, and move local variables around as
is needed. To keep the state of some variables and keep from having huge arg
lists to functions, make a bunch global.
Change use of err(3) in situations where malloc(3) will be setting errno to
errx(3) since assuming malloc(3) sets errno is non-portable, and provides no
more useful information in the context of FreeBSD.
Submitted by: bde (err/errx), Carl Schmidt <cschmidt@slackerbsd.org> (some
of the movement of the input loop to a function)
Approved by: src/tools/regression/usr.bin/xargs
argument list to NULL, to terminate the arguments passed
to execvp(2).
Thanks to: bde (for pointing out some missing parens)
And with apologies to Ozzy Osbourne:
On his way to dinner
It took him by surprise
When an email from bde
Said his code was full of lies
Style (indentation)
And his bracing were all wrong
He casted to size_t
When he should have cast to long
I don't mind
Single letter identifiers
Unwrapped Line
Over 80 chars
Far over 80 chars
Who can we get to send diffs
We need Bruce D. Evans
Shows you comparason to his
We need Bruce D. Evans again
s1 was 0 length, and replstr was 0 length, etc., we would end up subtracting
one from zero and seeing if it was greater than the size_t (unsigned) var
maxsize... This would cause us to return a string consisting of essentially
only match, which is not the right behaviour if we have 0 length inpline.
it. It handles everything (right now) that needs done before run(), except
the -J case, because while that would be easy, I don't quite understand -J.
Reviewed by: src/tools/regression/usr.bin/xargs
it easier to understand. Making it easy to understand isn't all that easy,
so litter the code with comments so some other poor soul can come along some
day and work on this if they see fit to do so. Avoid calling strlen(3) to
check for a nil-string, when we can just check for *str=='\0'.
Approved by: src/tools/regression/usr.bin/xargs/
same on Alpha and lint(1) pointed that out.
lint(1) on the same architecture pointed out how silly a cast to (u_int) to
malloc(3)'s argument was. Change that to size_t.
use of replstr and lack of Iflag), and add -R, which when given with
-I controls the number of arguments on which replacement will be done.
Some people happen to think it's idiotic to limit to 5 arguments, so
let the user override it if they like.
corrupt memory. Simplifies the code in one or two places, also removes some
code that looks like it was bogus or incomplete.
Update strnsubst to have one or two extra conditions which maybe would make
it more efficient, or at least more versatile. This is likely a no-op.
- When an error occurs processing one file, we must continue to process
the remaining files.
- Convert trailing whitespace to tabs as appropriate.
- Align backspace handling with what the verification suite expects.
Reviewed by: mike
Exit with nonzero status if a conversion failed.
Play nice if used as a shell builtin (currently disabled).
Submitted by: bde (partially)
Approved by: mike
1. The committer refused to respond to questions over the commit.
2. The servers rlogind, rshd, rexecd were not wrapped.
3. "rcmnds" as an abbreviation gets an order of magnitude less hits on
Google than the much more well known "rcmds".
to the way expand(1) allows. This brings unexpand(1) up to SUSv3 conformance,
and it now passes all relevant parts of the GNU textutils test suite.
PR: 35621
Reviewed by: mike
processing them.
- \c escape to immediately stop output (similar to echo's \c)
- \0NNN should be allowed for octal character escapes (instead of just \NNN)
- %b conversion, which is like %s but interprets \n \t etc. inside the
string is missing.
And I may not be any poet, but in lieu of an in-tree regression test:
ref5% ./printf '%s%b%b%c%s%d\n' 'PR' '\0072' '\t' '3' '56' 0x10
PR: 35616
Submitted by: tjr
MFC after: 1 week
Cast sizeof() to (int), as it's being compared against an int, not a size_t.
If i is changed to a size_t, it means the logic must be slightly changed later
in the flow, where --i is checked to be >= 0. I am not sure I want to make a
logic change to account for clearing up a warning, when an aesthetic one will
keep from modifying the logic.
Other harmless casts, that I think I've made in the right directions.
Make gpbc() an inline function, rather than an obfuscated macro, make its
scratch space local, rather than global. The previous macro used a dirty
hack (logical AND in place of a conditional) which would lead GCC to throw
a fit (rightly so) as the logical check, as well as the incrementation of
a variable, were not used for anything.
const'ify a few places where gcc3 yells. xstrdup() some global consts in
places where we xstrdup() when not using consts, but tried to assign them
to non-consts before.
Don't use execv(2) if we don't have the kind of arguments it wants.
Reviewed by: asmodai obrien tjr
Submitted by: tjr (a gcc3 build log)
Merge xargs(1) with that of xMach.
Bring in xargs(1) changes to add -L and -I as per the Single Unix Specification
version 3. Proper exit status numbers are implemented, and the manual page has
been updated to reflect reality.
The code has been ANSIfied, and a new file has been added to xargs(1) to do the
substring substitution as SUSv3 requires.
Traditional behaviour should not be affected, use of -J should be deprecated
in favor of the more portable -I (though -J has been left, for now).
Submitted by: me, tjr (the exit status stuff)
Obtained from: xMach
$FreeBSD$ identifiers, and fix initialisation to stderr to happen in a function
as stderr is not the same in CURRENT as in OpenBSD.
Reviewed by: obrien
- ifdefs around vendor sccsid were left reversed after switching to
__FBSDID().
- vertical whitespace after some of the non-FALLTHROUGH cases was lost.
- too much vertical whitespace before prototypes.
- don't use unusual indentation for 39 lines of declarations when only 2
of the lines benefit from it.
- don't use __DECONST(). This was the one use of it in the tree, and it
was just wrong. It was used to hide the warning about tgetnum() having
the wrong prototype (missing a `const') due to libncurses being
misconfigured. libncurses has been fixed, so the original code now
compiles cleanly with WARNS=4.
option (try to break at word bounaries) for SUSv3 conformance.
Partially based on the NetBSD version, with the following changes:
- style(9)
- break on <blank>s, not spaces, per POSIX (and GNU)
- when looking for last space on line, search backwards instead of
forwards; less comparisons needed this way.
- use LINE_MAX macro instead of a magic number and a comment saying it is
LINE_MAX.
PR: 36245
Reviewed by: mike
Obtained from: NetBSD (partially)
to be emitted as per the C preprocessor. It updates the manual page in
regards to standards accordingly.
PR: standards/36075
Submitted by: tjr
Reviewed by: mike
MFC after: 1 week
Updated the kmemzones logic such that the ks_size bitmap can be used as an
index into it to report the size of the zone used.
Create the kern.malloc sysctl which replaces the kvm mechanism to report
similar data. This will provide an easy place for statistics aggregation if
malloc_type statistics become per cpu data.
Add some code ifdef'd under MALLOC_PROFILING to facilitate a tool for sizing
the malloc buckets.
With rev 1.7 one cannot build src/bin/sh -- because make fails to create
the buildtools before trying to use them. Actually it does compile the
buildtools into .o's before trying to use them, but not all the way into
binaries.
Since then we have living with a GPL'ed find(1) due to grabbing getdate.y
from src/contrib/cvs and its user of the GPL'ed xtime.h. I don't even want
to think about how this could have affected people using our source base.
Would it have been too much trouble to do then what I did now?
Copied getdate.y (public domain) to usr.bin/find and change to use
standard system headers. find(1) now compiles simply with out having
to go to extra effort to do so.
Pointed hat to: phk
Build fixed on: gcc 3.1 using platforms
1) Add missing initialisers.
2) Avoid shadowing rcswhich.
3) Use intmax_t and %j for printing rather than quad_t and %q.
4) Don't modify a variable twice between sequence points.
make installed) in gnu/usr.bin/groff/src/preproc/eqn (which, being a
build tool itself, is built with the original make during buildworld).
The problem seems to be that in str_concat(), the string is not
terminated when the length of the second string is 0.
This apparently can happen during null suffix rule processing.
Submitted by: tmm
to unsigned long long.
Don't be too overzealous with the printing of ks_calls in the total
statistics, cut back from 20 to 13 positions to print (which should last
a couple of years easily (20 digits is enough for 3168 years of calls at a
measly billion (10^9) calls per second.)).
Submitted by: bde
substitution expressions in the form `s,[fooexp],[barexp],;...' treated
as invalid when the third `,' is (_POSIX2_LINE_MAX * N)-th character in
the line.
MFC after: 2 weeks
test if failsafe memory allocation fails, it can't. perror -> warn. Use
failsafe memory allocation provided.
Use .Pa and .Ar. Uppercase (first letter) programname after dot.
breakage with ioctl.c. The .depend file should track dependencies
just fine, and the worst we can have is to miss new ioctls.
But I still think it's a good idea to have -DNOCLEAN build produce
the same ioctl.c as it would without -DNOCLEAN.
Prodded for a long time by: bde
make sense to me) and change the printf argument from %8ld to %20llu to
accompany the printing of the totals.
Realigned the header printed above it as well.
PR: 32342
Submitted by: ryan beasley <ryanb@goddamnbastard.org>
Reviewed by: jeff, Tim J Robbins
not have setprogname(3) and getprogname(3), and we need to build
lint(1) as a cross-tool to bootstrap. Versions from lib/libc/gen
can't be compiled either.
PR: bin/36747
specified, and then the first part of the pattern space is deleted, when
there are two or more input lines, as this results in subtraction of one from
an unsigned integral value of '0'. That bogus value is used in one case
for a loop (that will run far too many times in this case) and a function to
search for a value within a specified range of memory, however now the range
of memory is obscenely large and a segmentation fault will occur. This is
fixed by checking for and appropriately handling a nil pattern space as if
the specified search in memory failed, as indeed it obviously will with nil
pattern space.
Submitted by: Tim J. Robbins <tim@robbins.dropbear.id.au>
PR: bin/34813
Reviewed by: mike
MFC after: 1 day
dependencies in the machine/* headers to make it explode when -U__GNUC__
is specified by lint. Not to mention that lint is passing undocumented
(illegal?) args to cpp and that seems to upset gcc-3.1 now.
Specifically, -Wp,-CC. -Wp,-C is documented and legal though.
2) Cast ifdef_level to a size_t before comparing it to a ratio of size_ts.
Ifdef_level should always be positive.
3) Complete prototype for chfont.
4) Cast some ptrdiff_ts to ints before using as a field width.
5) Avoid shadowing a local variable p with another local variable p.
2) Move a break outside a #if block to keep gcc3 from seeing a "default:"
at the end of a block.
3) Fix some format warnings. Some remain which can be fixed more easily
when we have a full C99 printf.
Make usage message match the man page. (Missing -o, -h doesn't depend on -d).
PR: 36470
Submitted by: Gary W. Swearingen <swear@blarg.net>
MFC after: 1 week
