- Rename vxfoo() functions to vx_foo() to improve readability and
consistency with other drivers.
- Prefix most the softc members with 'vx_' (the other members already had
the prefix).
- Switch to using callout_init_mtx() and callout_*() rather than
timeout() and untimeout().
- Add some missing calls to if_free() in some failure cases in vx_attach().
- Use if_printf() and remove the unit number from the softc.
- Remove uses of the 'register' keyword and spls.
- Add locked variants of vx_init() and vx_start().
- Add a mutex to the softc and lock it in various appropriate places.
- Setup the interrupt handler last during attach.
Tested by: imp
MFC after: 1 week
if (foo);
bar();
to:
if (foo)
bar();
Really, really nasty bug and a very nice catch of mine.
Unfortunately, I'll not become a hero of the day, because the code is
commented out.
- Don't keep the SPDIF state in the driver private struct since it
can be overriden by hand with pciconf(8), query it when needed instead.
Regarding the locking I let Ariff explain it himself:
---snip---
About the locking, that is what I'm intended to do since the beginning.
The reason I'm not putting that along since my first patchset was
because several people especially from amd46 camp reported that it cause
lots of LORs, which is weird considering that I've never encounter such
in a pretty much strict locking environment (i386). However, since our
previous discussion with Pyun YongHyeon about strict locking, I've
decided to bring it back for all the affected drivers, not just for
es137x. It turns out that the root of the problem was within dsp.c
during device open, which has been fixed since dsp.c revision 1.84.
---snip---
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
code which may help.
People with a ich compatible soundcard which want to help out should
change the "#if 1" to a "#if 0" and try if the soundcard still works.
Reports about working or not-working soundcards with this change to
multimedia@ please.
PR: 73987
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
can be compiled as loadable modules.
Reviewed by: bde
o Add support for Tamarack TC5299J + MII found on SMC 8041TX V.2
and corega PCCCCTXD
o Add support for ISA/PCI RTL80[12]9 chips
o Improve support for the ax88790 based
o minor code movement
Submitted by: (#2) David Madole
instead of an int. No other FreeBSD architecture does this. Patch over
this problem in the lmc driver. While I'm here, correct a mistake with
DEVICE_POLLING.
- Don't bzero the softc first thing in attach.
- Cleanup error handling in attach() to avoid lots of duplication.
- Don't initialize the callout handle twice.
MFC after: 3 days
interface polling, compiles on 64-bit platforms, and compiles on NetBSD,
OpenBSD, BSD/OS, and Linux. Woo! Thanks to David Boggs for providing this
driver.
Altq, sppp, netgraph, and bpf are required for this driver to operate.
Userland tools and man pages will be committed next.
Submitted by: David Boggs
sampling rate between playback and recording. This can be
disabled / enabled via kernel hints
(hint.pcm.<unit>.fixed_rate=0/4000-48000) or sysctl
hw.snd.pcm<unit>.fixed_rate=0/4000-48000). Default to 48khz
fixed rate. [1]
* Basic cleanup. *_es1371x_* -> *_es137x_*.
* Some locking fixes. [2]
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Discussed with: yongari [2]
See also: http://lists.freebsd.org/pipermail/freebsd-multimedia/2005-September/002758.html [1]
Reported by: Jos Backus <jos at catnook.com> [1]
* General spl* cleanup. It doesn't serve any purpose anymore.
* Nuke sndstat_busy(). Addition of sndstat_acquire() /
sndstat_release() for sndstat exclusive access. [1]
sys/dev/sound/pcm/sound.c:
* Remove duplicate SLIST_INIT()
* Use sndstat_acquire() / release() to lock / release the entire
sndstat during pcm_unregister(). This should fix LOR #159 [1]
sys/dev/sound/pcm/sound.h:
* Definition of SD_F_SOFTVOL (part of feeder volume)
* Nuke sndstat_busy(). Addition of sndstat_acquire() /
sndstat_release() for exclusive sndstat access. [1]
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
LOR: 159 [1]
Discussed with: yongari [1]
* Added codec id for CMI9761.
* feeder_volume *whitelist* through ac97_fix_volume()
sys/dev/sound/pcm/ac97.h:
* Added AC97_F_SOFTVOL definition.
sys/dev/sound/pcm/channel.c:
* Slight changes for chn_setvolume() to conform with OSS.
* FEEDER_VOLUME is now part of feeder building process.
sys/dev/sound/pcm/mixer.c:
* General spl* cleanup. It doesn't serve any purpose anymore.
* Main hook for feeder_volume.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested by: multimedia@
- WEP TX fix:
The original code called software crypto, ieee80211_crypto_encap(),
which never worked since IEEE80211_KEY_SWCRYPT was never flagged due to
ieee80211_crypto_newkey() assumes that wi always supports hardware based
crypto regardless of operational mode(by virtue of IEEE80211_C_WEP).
This fix works around that issue by adding wi_key_alloc() to force
the use of s/w crypto. Also if anyone ever decides to cleanup ioctl
handling where key changes wouldn't cause a call to wi_init() every time,
we'll need wi_key_alloc() to DTRT.
In addition to that, this fix also adds code to wi_write_wep() to force
existing keys to be switched between h/w and s/w crypto such that an
operation mode change(sta <-> hostap) will flag IEEE80211_KEY_SWCRYPT
properly.
- WEP RX fix:
Clear IEEE80211_F_DROPUNENC even in hostap mode. Quote from Sam:
"This is really gross but I don't see an easy way around it.
By doing it we lose the ability to independently drop unencode
frames (and support mixed wep/!wep use). We should really be
setting the EXCLUDE_UNENCRYPTED flag written in wi_write_wep
based on IEEE80211_F_DROPUNENC but with our clearing it we can't
depend on it being set properly."
Reported by: Holm Tiffe <holm at freibergnet dot de>
Submitted by: sam
MFC after: 3 days
o Axe poll in trap.
o Axe IFF_POLLING flag from if_flags.
o Rework revision 1.21 (Giant removal), in such a way that
poll_mtx is not dropped during call to polling handler.
This fixes problem with idle polling.
o Make registration and deregistration from polling in a
functional way, insted of next tick/interrupt.
o Obsolete kern.polling.enable. Polling is turned on/off
with ifconfig.
Detailed kern_poll.c changes:
- Remove polling handler flags, introduced in 1.21. The are not
needed now.
- Forget and do not check if_flags, if_capenable and if_drv_flags.
- Call all registered polling handlers unconditionally.
- Do not drop poll_mtx, when entering polling handlers.
- In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
- In netisr_poll() axe the block, where polling code asks drivers
to unregister.
- In netisr_poll() and ether_poll() do polling always, if any
handlers are present.
- In ether_poll_[de]register() remove a lot of error hiding code. Assert
that arguments are correct, instead.
- In ether_poll_[de]register() use standard return values in case of
error or success.
- Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
poll_switch() goes through interface list and enabled/disables polling.
A message that kern.polling.enable is deprecated is printed.
Detailed driver changes:
- On attach driver announces IFCAP_POLLING in if_capabilities, but
not in if_capenable.
- On detach driver calls ether_poll_deregister() if polling is enabled.
- In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
flag. If there is no, then unlocks and returns.
- In ioctl handler driver checks for IFCAP_POLLING flag requested to
be set or cleared. Driver first calls ether_poll_[de]register(), then
obtains driver lock and [dis/en]ables interrupts.
- In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
If present, then returns.This is important to protect from spurious
interrupts.
Reviewed by: ru, sam, jhb
the softc.
- Use callout_init_mtx() and rather than timeout/untimeout in both rl(4)
and re(4).
- Fix locking for ifmedia by locking the driver in the ifmedia handlers
rather than in the miibus functions. (re(4) didn't lock the mii stuff
at all!)
- Fix some locking in re_ioctl().
Note: the two drivers share the same softc declared in if_rlreg.h, so they
had to be change simultaneously.
MFC after: 1 week
Tested by: several on rl(4), none on re(4)
routing, etc. in a static pci_assign_interrupt() function.
- Add a sledgehammer that allows the user to override the interrupt
assignment of any PCI device via a tunable (e.g. "hw.pci0.7.INTB=5" would
force any functions on the pci device in slot 7 of bus 0 that use B# to
use IRQ 5). This should be used with great caution! Generally, if the
interrupt routing in use provides specific tunables (such as hard-wiring
the IRQ for a given $PIR or ACPI PCI link device), then those should be
used instead. One instance where this tunable might be useful is if a
box has an MPTable with duplicate entries for the same PCI device with
different IRQs.
MFC after: 1 week
the Intel 82371AB PCI-ISA bridge. We now do this all the time for the
!APIC case in the atpic driver. This cuts the raw line count for this
driver by about 40%.
MFC after: 1 week
make function reenterable. In the runtime the race is masked by serializing
of em_process_receive_interrupts() either by interrupt thread, or by
polling. The race can be triggered when polling is switched on or off.
I'm able to suspend/resume my laptop without this change, but then I need
to wait for the watchdog to reset the card.
With this change, it is ready immediately.
Glanced at by: glebius
subdrivers to hook up.
It should probably be rewritten to implement a simple bus to which
the sub drivers attach using some kind of hint.
Until then, provide a couple of crutch functions with big warning
signs so it can survive the recent changes to struct resource.
and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.
Tested on: i386, sparc64, make universe
MFC after: 1 week
control register and AGP bridge seems to be inconsistent with some BIOS.
Instead of relying on BIOS settings, we just take the initial aperture size
and encode them for both miscellaneous control register and AGP bridge.
Some idea was borrowed from agp_nvidia.c.
- Add preliminary ULi M1689 chipset support. The idea was taken from Linux
because hardware and documentation are unavailable. Not tested.
- Add more VIA chipset PCI IDs taken from Linux driver.
Approved by: anholt (mentor)
Tested by: Adam Gregoire <ebola at psychoholics dot org>
Ganael Laplanche <ganael.laplanche at martymac dot com>
K Wieland <kwieland at wustl dot edu>
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
----------------------------
revision 1.27
date: 2005/09/19 03:10:16; author: imp; state: Exp; lines: +3 -2
Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
In fact, this change do nothing for this driver. It is protected from
this by cp_destroy variable. This variable also protects driver from initiation
of any activity from network stack with disabled intr handler with this change
applied.
----------------------------
revision 1.26
date: 2005/09/07 09:53:35; author: obrien; state: Exp; lines: +1452 -1453
Reorder code to not depend on an ISO-C illegal forward extern declaration.
----------------------------
Reason: do not move large functions location without serious reason. The same
could be done by forward function declaration. Please do not enlarge diff
without a reason any more.
Backout if_cp 1.27
----------------------------
revision 1.27
date: 2005/09/19 03:10:16; author: imp; state: Exp; lines: +3 -2
Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
Reason: bad previous commit. Would be restored by next commit.
