Under certain conditions on certain versions of Hyper-V, the RNDIS
rxfilter is _not_ zero on the hypervisor side after the successful
RNDIS initialization, which breaks the assumption of any following
code (well, it breaks the RNDIS API contract actually). Clear the
RNDIS rxfilter explicitly, drain packets sneaking through, and drain
the interrupt taskqueues scheduled due to the stealth packets.
Reported by: dexuan@
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10230
Synthetic keyboard is the only supported keyboard on GEN2 Hyper-V.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10196
The tsec_error_intr_locked() is called with the global lock owned (e.g.
the transmit and the receive lock are both owned). We must not call
tsec_receive_intr_locked() while owning the transmit lock. The normal
receive interrupt takes care that frames are received, this is none of
the business of the error interrupt.
Submitted by: Sebastian Huber <sebastian.huber_AT_embedded-brains.de>
Use a method similar to the if_dwc driver. Use a wmb() before the flags of the
first transmit buffer of a frame are written.
Group transmit/receive structure members for better cache efficiency.
Tested on P1020RDB. TCP transmit throughput increases from 60MiB/s to
90MiB/s.
Submitted by: Sebastian Huber <sebastian.huber_AT_embedded-brains.de>
Timeout is now effectively a boolean rather than a time-remaining. This was
missed in r316478, but included in the original patch (mis-merged with a manual
merge).
The status indicators are not set immediatly after a command. Discard
the first value.
Unlock the PHY mutex after a timeout in tsec_init_locked().
Tested on the P1020RDB.
Submitted by: Sebastian Huber <sebastian_DOT_huber_AT_embedded-brains_DOT_de>
mode. This works around bugs in at least 2 Intel BIOSes for our
subsequent setting of the DAC back to 8-bit mode. The bug caused dark
(mostly 1/4-intensity) colors for all except the first setting to a
VESA graphics mode (including for settings to the current mode).
Remove restoration (with less bits) of the palette in vesa_unload()
after resetting the DAC to 6-bit mode. Depend on the BIOS to keep
the palette consistent with the DAC for the simpler reset case like
we do everywhere else in places that are actually important.
Setting the video mode should reset everything to defaults, although
we usually don't want that. Even the buggy BIOSes set the DAC to the
default 6-bit mode, and set the palette to a default that matches the
DAC. We don't undo the reset for most things, but we do undo it for
the DAC (more precisely, we change to an 8-bit DAC if possible, and
this is the only way that we set to an 8-bit DAC; it is accidental
that if the DAC was in 8-bit mode from a previous mode switch then
setting it to 8-bit mode is an undo). The buggy BIOSes are confused
by our setting of the DAC to 8-bit mode in the "undo" case. They
should multiply palette entries by 4 to match, but they actually leave
all palette entries except #2 (green) and #248-255 (unused) untouched.
Green is mysteriously scaled from 0x2a to 0x6a, and #248-255 are scaled
correctly.
Our support for the 8-bit DAC had almost no effect except to enable
bugs. Syscons barely supports 16 colors, so it doesn't benefit much
from having a palette with 16 million colors instead of only 256K.
Applications can manage the palette using FBIO_{GET,SET}PALETTE, but
the palette managed by this is only used in the less interesting modes
(text and non-truecolor graphics modes up to 8 bits wide), and the
kernel loses the changes on any mode switch (including to another vt
in a different mode).
Improve existing BGX detection and adjust it to support both
new and older ThunderX firmwares. Match BGX FDT nodes by name
and reg. Match PHY instances by qlm-mode and name.
Tested on Firmware Version: 2016-09-30 09:12:11
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D9863
position. Especially the screen size, and potentially everything except
the input state and attributes. Do this by changing the cursor position
setting method to a general syncing method.
Use proper constructors instead of copying to create kernel terminal
contexts. We really want clones and not new instances, but there is
no method for cloning and there is nothing in the active instance that
needs to be cloned exactly.
Add proper destructors for kernel terminal contexts. I doubt that the
destructor code has every been reached, but if it was then it leaked the
memory of the clones.
Remove freeing of statically allocated memory for the non-kernel terminal
context for the same terminal as the kernel. This is in the nearly
unreachable code. This used to not happen because delicate context
swapping made the user context use the dynamic memory and kernel
context the static memory. I didn't restore this swapping since it
would have been unnatural to have all kernel contexts except 1 dynamic.
The constructor for terminal context has bad layering for reasons
related to the bug. It has to return static memory early before
malloc() works. Callers also can't allocate memory until after the
first constructor selects an emulator and tells upper layers the size
of its context. After that, the cloning hack required the cloning
code to allocate the memory, but for all other constructors it would
be better for the terminal layer to allocate and deallocate the
memory in all cases.
Zero the memory when allocating terminal contexts dynamically.
the thread that deals with socket state changes. This eliminates
various bad races with the ithread.
Submitted by: KrishnamRaju ErapaRaju @ Chelsio (original version)
MFC after: 3 days
Sponsored by: Chelsio Communications
This patch brings 802.1q support for Marvell 88E606x ethernet switches.
Test is done on 88E6065 chip (Aterm WR1200).
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10144
1) They are using wrong tag (Tx) + map (Rx) combination.
2) Rx descriptor is already synchronized in iwn_notif_intr()
3) It's not needed for transmitted data since device does not change
mbuf contents.
Tested with Intel 6205 (amd64), STA mode.
Newer VGAs don't support any mono modes, but bugs in the tables created
2 virtual mono modes (#45 90x43 and #112 80x43) that behaved more
strangely than crashing. 90-column modes are tweaked 80-column ones
and also fail to work on newer VGAs. #45 did crash (hang) on some
hardware.
it to a separate state for each CPU.
Terminal "input" is user or kernel output. Its state includes the current
parser state for escape sequences and multi-byte characters, and some
results of previous parsing (mainly attributes), and in teken the cursor
position, but not completed output. This state must be switched for kernel
output since the kernel can preempt anything, including itself, and this
must not affect the preempted state more than necessary. Since vty0 is
shared, it is necessary to affect the frame buffer and cursor position and
history, but escape sequences must not be affected and attributes for
further output must not be affected.
This used to work. The syscons terminal state contained mainly the parser
state for escape sequences and attributes, but not the cursor position,
and was switched. This was first broken by SMP and/or preemptive kernels.
Then there should really be a separate state for each thread, and one more
for ddb, or locking to prevent preemption. Serialization of printf() helps.
But it is arcane that full syscons escape sequences mostly work in kernel
printf(), and I have never seen them used except by me to test this fix.
They worked perfectly except for the races, since "input" from the kernel
was not special in any way.
This was broken to use teken. The general switch was removed, and the
kernel normal attribute was switched specially. The kernel reverse
attribute (config option SC_CONS_REVERSE_ATTR) became unused, and is
still unusable because teken doesn't support default reverse attributes
(it used to only be used via the ANSI escape sequence to set reverse
video).
The only new difficulty for using teken seems to be that the cursor
position is in the "input" state, so it must be updated in the active
input state for each half of the switch. Do this to complete the
restoration.
The per-CPU state is mainly to make per-CPU coloring work cleanly, at
a cost of some space. Each CPU gets its own full set of attribute
(not just the current attribute) maintained in the usual way. This
also reduces races from unserialized printf()s. However, this gives
races for serialized printf()s that otherwise have none. Nothing
prevents the CPU doing the a printf() changing in the middle of an
escape sequence.
Some code was additionally moved for (future) lock splitting.
Tested with Intel 6205, STA mode.
Differential Revision: https://reviews.freebsd.org/D10106
Do not try to use errno(2) codes here; instead, just return unique
value (1) when radio is disabled via hardware switch and another
one (-1) for any other error in initialization path.
Tested with Intel 6205, STA mode.
This can significantly reduce scan duration thus saving time and power.
EBS failure reported by FW disables EBS for current connection. It is
re-enabled upon new connection attempt on any WLAN interface.
Obtained from: dragonflybsd.git 89f579e9823a5c446ca172cf82bbc210d6a054a4
