Only i386 and amd64 provide a non-trivial __getcontextx(). Use a common
trivial implementation in gen/ for other architectures, rather than
copying the file to each MD subdirectory.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1472
cancellation-handling code in the libthr. Translate some syscalls
into their more generic counterpart, and remove translated syscalls
from the table.
List of the affected syscalls:
creat, open -> openat
raise -> thr_kill
sleep, usleep -> nanosleep
pause -> sigsuspend
wait, wait3, waitpid -> wait4
Suggested and reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
(or loading a dso linked to libthr.so into process which was not
linked against threading library).
- Remove libthr interposers of the libc functions, including
__error(). Instead, functions calls are indirected through the
interposing table, similar to how pthread stubs in libc are already
done. Libc by default points either to syscall trampolines or to
existing libc implementations. On libthr load, libthr rewrites the
pointers to the cancellable implementations already in libthr. The
interposition table is separate from pthreads stubs indirection
table to not pull pthreads stubs into static binaries.
- Postpone the malloc(3) internal mutexes initialization until libthr
is loaded. This avoids recursion between calloc(3) and static
pthread_mutex_t initialization.
- Reinstall signal handlers with wrapper on libthr load. The
_rtld_is_dlopened(3) is used to avoid useless calls to sigaction(2)
when libthr is statically referenced from the main binary.
In the process, fix openat(2), swapcontext(2) and setcontext(2)
interposing. The libc symbols were exported at different versions
than libthr interposers. Export both libc and libthr versions from
libc now, with default set to the higher version from libthr.
Remove unused and disconnected swapcontext(3) userspace implementation
from libc/gen.
No objections from: deischen
Tested by: pho, antoine (exp-run) (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In r228193 the test of CONNPRIV have been moved to before the _usleep
and send in vsyslog(). When syslogd restarts, this would prevent the
message being logged after the disconnect/connect dance for
scenario #1.
PR: 194751
Submitted by: Peter Creath <pjcreath+freebsd gmail com>
Reviewed By: glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D1227
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
in a separate word from the _count. This does not permit both items to
be updated atomically in a portable manner. As a result, sem_post()
must always perform a system call to safely clear _has_waiters.
This change removes the _has_waiters field and instead uses the high bit
of _count as the _has_waiters flag. A new umtx object type (_usem2) and
two new umtx operations are added (SEM_WAIT2 and SEM_WAKE2) to implement
these semantics. The older operations are still supported under the
COMPAT_FREEBSD9/10 options. The POSIX semaphore API in libc has
been updated to use the new implementation. Note that the new
implementation is not compatible with the previous implementation.
However, this only affects static binaries (which cannot be helped by
symbol versioning). Binaries using a dynamic libc will continue to work
fine. SEM_MAGIC has been bumped so that mismatched binaries will error
rather than corrupting a shared semaphore. In addition, a padding field
has been added to sem_t so that it remains the same size.
Differential Revision: https://reviews.freebsd.org/D961
Reported by: adrian
Reviewed by: kib, jilles (earlier version)
Sponsored by: Norse
previous seek location was 0. Without this, readdir() would see
dd_loc of zero and call getdirentries() which would start reading
entries at the current seek location of the directory ignoring the
first batch of entries. Also, rewinddir() should always seek so that
it reads the directory from the beginning to get updated entries.
PR: 192935
Reported by: iron@mail.ua
MFC after: 3 days
requires the return value of telldir() to equal the value passed to
seekdir(). The current seekdir code with SINGLEUSE enabled breaks
this case as each call to telldir() allocates a new cookie. Instead,
remove the SINGLEUSE code and change telldir() to look for an existing
cookie for the directory's current location rather than always creating
a new cookie.
CR: https://phabric.freebsd.org/D490
PR: 121656
Reviewed by: jilles
MFC after: 1 week
after an intervening call to rewinddir() is undefined, so reclaim any
pending telldir() cookies in the directory when rewinddir() is called.
CR: D459
Reviewed by: jilles
MFC after: 1 week
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
Obtained from: OpenBSD
MFC after: 5 days
- In the unionfs case, opendir() and fdopendir() read the directory's full
contents and cache it. This cache is not refreshed when rewinddir() is
called, so rewinddir() will not notice updates to a directory. Fix this
by splitting the code to fetch a directory's contents out of
__opendir_common() into a new _filldir() function and call this from
rewinddir() when operating on a unionfs directory.
- If rewinddir() is called on a directory opened with fdopendir() before
any directory entries are fetched, rewinddir() will not adjust the seek
location of the backing file descriptor. If the file descriptor passed
to fdopendir() had a non-zero offset, the rewinddir() will not rewind to
the beginning. Fix this by always seeking back to 0 in rewinddir().
This means the dd_rewind hack can also be removed.
While here, add missing locking to rewinddir().
CR: https://phabric.freebsd.org/D312
Reviewed by: jilles
MFC after: 1 week
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
actual file storing the semaphore object is different from the file
created on the first open. Store the file st_dev and st_ino members
of the struct stat in the semaphore structure on open, and compare
them with the attributes of the opened file to detect unlink and
re-creation.
This fixes an issue of sem_unlink(3) failing to flush the named entry
in the semaphore list for the current or remote process, making
sem_unlink(3) not correctly operating if the unlinked semaphore is
still opened.
Reported by: Joris Giovannangeli <joris@giovannangeli.fr>
PR: standards/189353
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pointer for the login name (result). Make sure to handle that
case properly. Improve robustness by checking namelen and then
nul-terminating the provided buffer to simplify subsequent logic.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Make fts_open(3) treat an empty pathname like any other pathname that cannot
be lstatted because of [ENOENT].
It is rather confusing if rm -rf file1 "" file2 does not remove file1 and
file2.
PR: bin/187264
MFC after: 2 weeks
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
If rare conditions such as concurrent conflicting manipulation of the
filesystem occur, fts_read() frees the current FTSENT without adjusting
the pointers in the FTS accordingly. A later fts_close() then frees the
same FTSENT again.
Reported by: pho
Tested by: pho
MFC after: 1 week
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
As a result, the kernel needs to process shorter pathnames if fts is not
changing directories (if fts follows symlinks (-L option to utilities), fts
cannot open "." or FTS_NOCHDIR was specified).
Side effect: If pathnames exceed PATH_MAX, [ENAMETOOLONG] is not hit at the
stat stage but later (opendir or application fts_accpath) or not at all.
Even though not all race conditions can be fixed if the 'e' option is not
used, still fix some race conditions using pipe2():
* Prevent both ends of the pipe from leaking to a concurrent popen().
* Prevent the child process's end of the pipe from leaking to any concurrent
fork and exec.
This change also simplifies the code.
This ensures strerror() and friends continue to work correctly even if a
(non-PIE) executable linked against an older libc imports sys_errlist (which
causes sys_errlist to refer to the executable's copy with a size fixed when
that executable was linked).
The executable's use of sys_errlist remains broken because it uses the
current value of sys_nerr and may access past the bounds of the array.
Different from the message "Using sys_errlist from executables is not
ABI-stable" on freebsd-arch, this change does not affect the static library.
There seems no reason to prevent overriding the error messages in the static
library.
