Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.
MFC-After: 1 week
Sponsored by: Metify Inc.
Sponsored by: Klara Inc.
Polling is currently only implemented in the xhci pci attachment.
Adding it to dwc3 doesn't make it much uglier, and supporting it can be
useful for confirming that hardware's otherwise functional when
interrupts are apparently not firing.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D38816
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
- remove Huawei 3G E3131 (E3131_INIT):
- frees up 0x1505/0x14fe shared IDs => product is EOL (since...)
- 3G networks are shutdown/scheduled
- E3131 devices will still work the same via scsi_huawei_eject2
- new 4G devices will switch & report correctly now
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Switch the now added E5573Cs322_ECM (0x14db) as well per default to NCM.
With this patch we default all devices to simple NCM mode to avoid the
problem and get a consistent reliable behavior. No matter what firmware
version and provider mix are involved.
Rationale:
Even the bigger SOC shows under complex load in ECM (double-nat) mode
the same performance drop from 25Mbit to 2Mbit Line Speed, similar to E3372h.
Reason: Thermal problems (reported via serial debug interface in ACM Mode)
after 2-3 minutes load.
Fix the root cause and bundle a working firmware is out of reach because
Huawei sells the same hardware, different (crippled) firmware versions
at different price points in different markets as strategy.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Add initialization for new Huawei 4G E3372_NCM, E3372v153_NCM,
E5573Cs322_NCM, E5573Cs322_ECM, and E5573Cs322_ACM.
Remove now-obsolete Huawei 3G E3131 init sequence. These devices are
obsolete, share IDs with new devices and the 3G networks are shutdown.
These old devices work correctly via the 4G code while still allowing
the shared IDs to work differently for the new devices.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Some devices have CDC_CM descriptors that would point us to
the wrong interfaces. Add a quirk to ignore those (prefering the
CDC_UNION descriptor effectively)
Reviewed by: manu
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37942
The Windows Dev Kit 2023 has an if_ure NIC with custom vendor and
procuct IDs. Add them to the driver.
Tested by: Robert Clausecker <fuz@fuz.su>
Obtained from: OpenBSD
Sponsored by: Arm Ltd
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2 places: first is
the IFLA_OPERSTATE, which stores state per RFC2863.
The second is an IFF_LOWER_UP interface flag. As many applications rely
on the latter, reserve 1 bit from if_flags, named as IFF_NETLINK_1.
This flag is mapped to IFF_LOWER_UP in the netlink headers. This is done
to avoid making applications think this flag is actually
supported / presented in non-netlink outputs.
* Add flag change notifications, by hooking into rt_ifmsg().
In the netlink model, notification should include the bitmask for the
change flags. Update rt_ifmsg() to include such bitmask.
Differential Revision: https://reviews.freebsd.org/D37597
of various keyboard drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
Keyboard grabbing is disabled in KDB and during panics.
MFC with: 4a0db5e292
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
of psm(4), ums(4) and sysmouse(4) drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
MFC after: 2 weeks
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
We shouldn't force USB2 only based on if we have an external PHY.
The internal PHY register tell us what link speed we can acheive
and we need to force USB2 only if it cannot do USB3.
This is only available after revision 0x290A of the dwc3 IP.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37394
Fixed: 1331c0f44b ("Add support for RockChip RK356X to DWC3 driver.")
Sponsored by: Beckhoff Automation GmbH & Co. KG
We need to enable some quirks based on the version so read it.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37393
Sponsored by: Beckhoff Automation GmbH & Co. KG
Usually dwc3 needs a glue node that contain the SoC specific clocks/resets.
For some reason the RK3328 DTS doesn't have this glue node and the clocks
are specified in the dwc3 node directly.
The bindings says that it is allowed but doesn't specified some strict names
for them.
Add a specific case for RK3328 based on the compatible string.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37392
Sponsored by: Beckhoff Automation GmbH & Co. KG
To avoid data loss, make sure both the receive and transmit data toggles
get reset, before trying to read or write any data.
MFC after: 1 week
Sponsored by: NVIDIA Networking
The SAN interceptors simply take a bus_space_tag_t, so we're
dropping qualifiers here. const semantics with a ptr typedef mean we'd
have to drop or change the bus_space_tag_t abstraction used in the SAN
sanitizers in order to make a compatible change there, which likely
isn't worth it.
Reviewed by: andrew, markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D36764
