Add more values to the ieee80211_min_mpdu_start_spacing enum with
two missing given we do not know how they are called. Also update
the reference while here.
Add struct ieee80211_hdr_3addr and correct the comment on the
ieee80211_hdr to match the one in net80211 to avoid future confusion.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Implement pcie_capability_set_word() using the already available
read/write functions.
Also define the completion timeout disable value to our PCI one.
Both needed by a driver update.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D35250
from fast one as dmabuf does not run callbacks from critical sections
since drm-kmod 5.7.
Consumers which requires fair irq_work like drm-kmod 5.4 must #define
LKPI_IRQ_WORK_USE_FAST_TQ somewhere in source file before linux/irq_work.h
inclusion to enable old behavior.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35052
in linux/irq_work.h as irq_work structure contains full version of
llist_node rather than reference to it.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35052
Kthread worker is a single thread workqueue which can be used in cases
where specific kthread association is necessary, for example, when it
should have RT priority or be assigned to certain cgroup.
This change implements Linux v4.9 interface which mostly hides kthread
internals from users thus allowing to use ordinary taskqueue(9) KPI.
As kthread worker prohibits enqueueing of already pending or canceling
tasks some minimal changes to taskqueue(9) were done.
taskqueue_enqueue_flags() was added to taskqueue KPI which accepts extra
flags parameter. It contains one or more of the following flags:
TASKQUEUE_FAIL_IF_PENDING - taskqueue_enqueue_flags() fails if the task
is already scheduled to execution. EEXIST is returned and the
ta_pending counter value remains unchanged.
TASKQUEUE_FAIL_IF_CANCELING - taskqueue_enqueue_flags() fails if the
task is in the canceling state and ECANCELED is returned.
Required by: drm-kmod 5.10
MFC after: 1 week
Reviewed by: hselasky, Pau Amma (docs)
Differential Revision: https://reviews.freebsd.org/D35051
Lock must be released rather than acquired around mi_switch call.
MFC after: 1 week
Reviewed by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D35048
This implementation uses the concurrency kit, CK, API directly which is
suitable for use with EPOCH(9) and RCU under FreeBSD.
No functional change intended.
The initial "linux/hash.h" code was obtained from DragonFlyBSD via
FreeBSD's drm-kmod in ports.
Differential Revision: https://reviews.freebsd.org/D35162
Reviewed by: bz@ and markj@
MFC after: 1 week
Sponsored by: NVIDIA Networking
Disable preemption in seqlock write sections when using the _irqsave
variant. This ensures that a writer can't be preempted and subsequently
starved by a reader running in a callout handler on the same CPU.
This fixes occasional display hangs seen when using the i915 driver.
Tested by: emaste, wulf
Reviewed by: wulf, hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35021
Implement skb_copy() with omissions of fragments and possibly other fields
for now. Should we hit frags at any point a log message will let us know.
For the few cases we need this currently this is enough.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
While it is currently unclear if we will have to defer work in
dev_kfree_skb_irq() to call dev_kfree_skb().
We only have one caller which seems to be fine on FreeBSD by calling
it directly for now.
While here shortcut skb_put()/skb_put_data() saving us work if there
are no adjustments to do.
Also adjust the logging in skb_is_gso() to avoid getting spammed by it.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Add ALIGN_DOWN as rounddown2() along ALIGN() which is implemented as
roundup2().
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: manu, hselasky (now with less ())
Differential Revision: https://reviews.freebsd.org/D34844
dev_alloc_skb() comapred to alloc_skb() reserves some headroom
at the beginning of the skb which is used by drivers.
Split the code for the two cases and reserve NET_SKB_PAD space,
which should at least be 32 octets.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Move io_mapping_create_wc to .c because it encodes the size of struct
io_mapping so we move this from the client module to the linuxkpi
module.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34776
lkpi_pcim_iomap_devres_find encodes the size of struct pcim_iomap_devres
in the code, so move from .h to .c to move from client driver to
linuxkpi module.
Sponsored by: Netflix
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34775
pci_alloc_irq_vectors encodes the size of struct msix_entry
into its code. Move from .h to .c to move this knowledge from
client modules to linuxkpi module.
Sponsored by: Netflix
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34774
Both pci_request_region and _lkpi_pci_iomap encode the size of struct
pci_mmio_region into their code. Move from .h to .c files to move that
knowledge from the client drivers into the linuxkpi module.
Sponsored by: Netflix
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34773
lkpi_pci_devres_get_alloc encodes the struct pci_devres into its
code. Move from .h file to .c file to move this knowledge into linuxkpi
module.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34772
Move cdev_alloc into linux_compat.c since it encodes the size of struct
linux_cdev into the client modules otherwise.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34771
class_create encodes the size of struct class into the generated
code. Move from .h file to .c file to move this knowledge from the
client modules that call this into the linuxkpi module.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34769
device_create_groups_vargs encodes the size of struct device. Move
definition from .h to .c to move this size into the linuxkpi module
rather than encoding it in all client driver modules.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34768
kobject_create knows the size of struct kobject. Move it to
linux_compat.c so this knowledge is confined to the loadable module and
not the clients.
Sponsored by: Netflix
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D34767
Variants of for_each_sg/for_each_sg_dma_page but they operate on sgtable
structs.
Needed by drm v5.10
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Cleanup some debugging. Rename the global variable to be less
generic. Hide all debugging behind #ifdef for now and turn off.
Rename the debugging sysctl so we can start adding more to the
subtree.
There is a need to change that wildly grown infrastructure into
something more homogenic soon but this should do for 13.1.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
In skb_queue_splice_init() we set a next value and then used that new
value to further update the remaining linking rather than the original
value. Introduce another temporary variable 'n' to hold the original
value and use that.
While here rename q and h to from and to as otherwise it was too
confusing to read.
Also initialize skb->prev and skb->next to point to skb itself if
for nothing else at least to aid debugging.
Reported by: phk (panic in iwl_txq_reclaim)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
If we need to resched it takes the lock, resched, release the lock
and returns 1, otherwise simply returns 0.
Needed by drm v5.9
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34620
Allow drivers to query the "upstream PCI bridge".
Currently we point back to ourselves on pdev->bus->self rather than
to the parent PCI bridge.
We keep this as status-quo with an extra comment and only on-demand
allocate a pci_dev for the parent bridge if we are asked for in
pci_upstream_bridge().
When releasing the pci_dev we check if pdev->bus->self has changed
and call pci_dev_put() to release the reference count on the parent
bridge as well.
This code moves pci_is_root_bus() higher up in pci.h but no functional
change there.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: hselasky, (jhb some earlier)
Thanks to: wulf for handling drm-kmod
Differential Revision: https://reviews.freebsd.org/D34305
Implement MODULE_PNP_INFO() support in LinuxKPI for the Linux
MODULE_DEVICE_TABLE.
This will allow us to auto-load LinuxKPI PCI drivers (drm-kmod do
not currently as they attach to vgapci0 which in turn grabs the PCI
to my understanding) and make any loading from loader or kld_list in
rc.conf unnecessary; see devmatch(8) for more information.
We need to ensure there is a DRIVER_MODULE() (or probably just
a DECLARE_MODULE but that makes not much difference) before the
MODULE_PNP_INFO (which we otherwise would not need).
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: imp, hselasky, manu
Differential Revision: https://reviews.freebsd.org/D26651
Add bsd_probe_return which a driver can set in their 'struct pci_driver'
definition to set a driver-sepcific LinuxKPI pci return value.
This is helpful in case of multiple drivers with overlapping IDs,
such as iwlwifi(4) and iwm(4).
Contrary to an earlier version we now assume 0 is not BUS_PROBE_SPECIFIC
(which no driver should really return these days) but the bss initialized
value (bsd_probe_return unset) and we will return BUS_PROBE_DEFAULT.
Suggested by: jhb
Reviewed by: jhb
Reviewed by: hselasky, imp (earlier versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-MFC: new struct members need to go to the end for stable/13
Differential Revision: https://reviews.freebsd.org/D33915
Add dummy MODULE_IMPORT_NS() used by an updated iwlwifi.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34349
DECLARE_FLEX_ARRAY can be used inside a structure. On FreeBSD due to
-Wgnu-variable-sized-type-not-at-end this yields an error. Use [0]
instead of [] to overcome this.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34350
Add new defines, struct members, and (stub) functions needed for an
updated iwlwifi. Most of the defines are for rfkill or HE.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Implement dma_sync_single_for_{cpu,device} translating the Linux
DMA_ flags to BUS_DMASYNC_ combinations. Make map_single/unmap_single*
functions call the respective sync function. Apply the same logic to
the scatter-gather list map/unmap functions.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D32255
This contain mmap_read_lock, mmap_read_unlock and mmap_write_lock_killable
which are abstraction around down_read, up_read and down_write_killable.
Note that in Linux 5.8 mmap_sem was renamed to mmap_lock.
We might want to do the same at some point but some drivers still uses
the old mmap locking API.
Reviewed by: bz
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34297
This simply set the brightness of a backlight device.
Needed by drm-kmod v5.8
Reviewed by: bz, emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34285
This returns the wait queue based on the object but in LinuxKPI
we only have one waitqueue for this.
Reviewed by: hselasky, bz
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34250
Add and sort in more defines needed by newer drivers.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34293
Various updates to skbuff for new/updated drivers and some housekeeping:
- update types and struct members, add new (stub) functions
- improve freeing of frags.
- fix an issue with sleeping during alloc for dev_alloc_skb().
- Adjust a KASSERT for skb_reserve() which apparently can be called
multiple times if no data was put into the skb yet.
- move the sysctl from linux_8022.c (which may be in a different module)
to linux_skbuff.c so in case we turn debugging on we do not run into
unresolved symbols. Rename the sysctl variable to be less conflicting
and update debugging macros along with that; also add IMPROVE().
- add DDB support to show an skbuff.
- adjust comments/whitespace.
No functional changes intended for iwlwifi.
Sponsored by: The FreeBSD Foundation (partially)
MFC after: 3 days
This update is for more/newer versions of drivers:
- add and properly place more structs, enums, defines needed by drivers.
- correct types of struct fields.
- make various function arguments const.
- move REG_RULE() macro to its own file regulatory.h and
use macros for calculations.
- add linuxkpi_ieee80211_get_channel() implementation.
- change linuxkpi_ieee80211_ifattach() to return int for error checking.
No intended functional changes for iwlwifi.
Sponsored by: The FreeBSD Foundation (partially)
MFC after: 3 days
Add lockdep_assert_not_held() asserting LA_UNLOCKED as needed by a
driver.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34232
Add a linux/pm_qos.h with three dummy functions and a struct as needed
by a driver and drm-kmod [1] with no intend to support this for the moment.
Submitted by: wulf (drm-kmod bits) [1]
Sponsored by: The FreeBSD Foundation (drm-kmod requested updates)
MFC after: 3 days
Reviewed by: hselasky (earlier version), wulf
Differential Revision: https://reviews.freebsd.org/D34234
Add a definition for UUID_STRING_LEN to uuid.h as needed by a driver.
Also add GUID_INIT for drm-kmod [1].
Submitted by: wulf [1]
MFC after: 3 days
Reviewed by: hselasky (earlier), wulf
Differential Revision: https://reviews.freebsd.org/D34235
Add a beginning of a tracepoint.h implementation to ease porting drivers
making use of this Linux facility.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34236
Add NETIF_F_HW_CSUM to netdev_features.h as needed by a driver.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34233
Add an implementation of kstrtoint_from_user() based on the other
implementations and an attempt at DECLARE_FLEX_ARRAY() which works
for the driver needing it.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34231
Add an initial ethtool.h for a define and a dummy struct for now
needed by drivers.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34229
Add eth_random_addr() and a dummy of device_get_mac_address()
pending OF (FDT) support needed by drivers.
While here remove a white space in random_ether_addr().
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34228
Add ENOMEDIUM, ENOSR, and ELNRNG to linux/errno.h needed by drivers.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34227
Add sizeof_field() to linux/compiler.h needed by a driver.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34226
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
swap parameter is not supported as it is rarely used in Linux kernel
and its implementation will add some preprocessor spaghetti to qsort.
Required by drm-kmod.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33675
compile time assertion on non-NULL pointers. Tests conducted show that
_Static_assert, negative array size method and current code does not
handle pointers well enough. Bit field method solves this problem.
This change is derrived from Linux implementation of BUILD_BUG_ON_ZERO.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33674
They are superseded by PAT and mostly useless nowadays but still can be
used on Pentium III/IV era processors. Unlike drm-kmod version, this one
ignores MTRR if PAT is available that fixes confusing "Failed to add WC
MTRR for [0xXXXX-0xYYYY]: 22; performance may suffer" message often
appearing during drm-kmod initialization process.
MFC after: 1 week
Reviewed by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D33561
efi_enabled(EFI_BOOT) returns true if machine was booted from EFI
Used by drm-kmod and some unported drm drivers like hyperv
MFC after: 1 week
Reviewed by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D33300
Obsolete it usage but keep for a while for drm-kmod 5.4 compatibility
MFC after: 1 week
Reviewed by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D33298
Add more (dummy in case of HE) defines, structs, functions and another
mac80211 function pointer needed to update and support recent drivers.
MFC after: 3 days
Add or extend the already existing *_replace_bits() implementations
using macros as we do for the other parts in the file for
le<n>p_replace_bits(), u<n>p_replace_bits(), and _u<n>_replace_bits().
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D33799
Add a hex2bin() implementation needed by a driver's debugfs code.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D33798
Add 802.11 compat code for mac80211 and to a minimal degree cfg80211.
This allows us to compile and use basic functionality of wireless
drivers such as iwlwifi.
This is a constant work in progress but having it in the tree will
allow others to test and more easy to track changes and avoid having
snapshots no longer applying to branches.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import a netdevice update complementing the last remaining bits of
the old ifnet derived implementation. Along add a (for now) task
based NAPI implementation.
This is the minimal set of chnages which are needed for the initial
support of wireless drivers. The NAPI implementation has an option to
still switch to "direct dispatch" as it had been used by these drivers
before not relying on a deferred context along with some printf tracing.
This has been helpful in the last weeks for debugging and will be
cleaned once we have had broader testing and are sure this is fine as-is.
Should we need a more time-sensitive or load-sensitive response
in the future we can always switch to something more sophisticated.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-Differential Revision: D33075 (abandoned without feedback a while ago)
This is a work-in-progress implementation of sk_buff compat code
used for wireless drivers only currently.
Bring in this version of the code as it has proven to be good enough
to have packets going for a few months.
The current implementation has several drawbacks including the need
for us to copy data between sk_buffs and mbufs.
Do not rely on the internals of this implementation. They are highly
likely to change as we will improve the integration to FreeBSD mbufs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
