It supports the following Microchip devices:
LAN7430 PCIe Gigabit Ethernet controller with PHY
LAN7431 PCIe Gigabit Ethernet controller with RGMII interface
The driver has a number of caveats and limitations, but is functional.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."
Version : 1.26.2.0
Date : 09/24/2021
====================
FIXES
-----
BASE:
- Added support for SFP+ RJ45 (0x1C).
- Fixing backward compatibility issue with older drivers when multiple
speeds are passed to firmware.
OFLD:
- Do not touch tp_plen_max if driver is supplying tp_plen_max. This
fixes a connection reset issue in iscsi.
ENHANCEMENTS
------------
BASE:
- Firmware header modified to add firmware binary signature.
MFC after: 1 month
Sponsored by: Chelsio Communications
This reverts commit 0f6829488e.
Also it changes the type of md_usr_fpu_save struct mdthread member
to void *, which is what uncovered this trouble. Now the save area
is untyped, but since it is hidden behind accessors, it is not too
significant. Since apparently there are consumers affected outside
the tree, this hack is better than one from the reverted revision.
PR: 258678
Reported by: cy
Reviewed by: cy, kevans, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32060
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
when compiling in amd64 kernel environment with -m32. This is a temporal
workaround for some future proper (but unclear) fix.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
Fix device detach and attach routine. Add required Makefile
to build as a module. Remove entry from GENERIC, since now
it can be loaded automatically.
Tested on EspressoBin.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31581
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
ib_uverbs_flow_resources_free() is declard in two header files in
upstream OFED. Disable the warning to avoid introducing diffs to fix
the build on GCC 9.
While here, fix the ibcore module to disable the same warnings
disabled in OFED_CFLAGS.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31943
Notable upstream pull request merges:
#11312 Temporarily use root credentials to mount snapshots in .zfs
#12246 arc: Drop an incorrect assert
#12443 Fixed data integrity issue when underlying disk returns error
to zfs
#12522 Compressed receive with different ashift can result in incorrect
PSIZE on disk
#12535 Verify embedded blkptr's in arc_read()
#12541 Allow sending corrupt snapshots even if metadata is corrupted
Obtained from: OpenZFS
OpenZFS commit: 4a1195ca50
Fix device detach and attach routine. Add required Makefile
to build as a module. Remove entry from GENERIC, since now
it can be loaded automatically.
Tested on EspressoBin.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31581
Fix device detach and attach routine. Add required Makefile
to build as a module. Remove entry from GENERIC, since now
it can be loaded automatically.
Tested on EspressoBin.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31581
Fix detach routine.
Driver was tested on EspressoBin.
Remove it from GENERIC, since now it can be loaded automatically.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31580
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Delegate RSS related functionality into separate .c/.h files in
preparation for the full RSS support.
While at it, reorder functions and remove prototypes for ones with
internal linkage.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Notable upstream pull request merges:
#12022 Fix endianness issues with zstd
#12319 Extend zpool-iostat to account for ZIO_PRIORITY_REBUILD
#12458 Add hole punching support on FreeBSD version 1400032
#12473 Initialize parity blocks before RAID-Z reconstruction benchmarking
#12511 Make 'zpool labelclear -f' work on offlined disks
#12514 FreeBSD: Don't remove SA xattr if not SA znode
Obtained from: OpenZFS
OpenZFS commit: 3b89d9518d
MANA is the new network adapter from Microsoft which will be available
in Azure public cloud. It provides SRIOV NIC as virtual function to
guest OS running on Hyper-V.
The code can be divided into two major parts. Gdma_main.c is the one to
bring up the hardware board and drives all underlying hardware queue
infrastructure. Mana_en.c contains all main ethernet driver code.
It has only tested and supported on amd64 architecture.
PR: 256336
Reviewed by: decui@microsoft.com
Tested by: whu
MFC after: 2 week
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D31150
A module makefile must list all the header files it uses which are
generated at build time from interface definitions (.m files) in its
SRCS list.
Fixes: 5ad6d28cbe ("enetc: Support building the driver as a loadable module.")
A module makefile must list all the header files it uses which are
generated at build time from interface definitions (.m files) in its
SRCS list.
Fixes: 451bcf1b36
Reported by: ian
Notable upstream pull request merges:
#12339 Read past end of argv array in zpool_do_import()
#12365 Fixes in persistent L2ARC
#12383 Fixes for KMSAN reports
#12425 Avoid small buffer copying on write
#12428 Fix unfortunate NULL in spa_update_dspace
#12446 Allow disabling of unmapped I/O on FreeBSD
Obtained from: OpenZFS
OpenZFS commit: f3678d70ff
Modules should list all needed _if dependencies in their makefile otherwise
if one compiles a kernel that didn't compile those files the module won't build.
Fixes: 451bcf1b36
After recent arm64 GENERIC config cleanup the ENETC MDIO
in NXP LS1028A SoC should support being loaded as a module.
Obtained from: Semihalf
Sponsored by: Alstom Group
Function level reset has to be done in attach in order to put the
hardware in a known state before configuring it.
The order of DRIVER_MODULEs was changed to ensure that the miibus driver
is loaded when mii_attach is called.
Obtained from: Semihalf
Sponsored by: Alstom Group
It is found on boards equipped with LS1028A SoC.
802.1q VLAN grouping is supported.
An external MDIO device is used for communicating with PHYs.
The driver is built as a module by default, it is not included
in GENERIC kernel config.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30923
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
Import OpenBSD's syncookie support for pf. This feature help pf resist
TCP SYN floods by only creating states once the remote host completes
the TCP handshake rather than when the initial SYN packet is received.
This is accomplished by using the initial sequence numbers to encode a
cookie (hence the name) in the SYN+ACK response and verifying this on
receipt of the client ACK.
Reviewed by: kbowling
Obtained from: OpenBSD
MFC after: 1 week
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D31138
The vDSO (virtual dynamic shared object) is a small shared library that the
kernel maps R/O into the address space of all Linux processes on image
activation. The vDSO is a fully formed ELF image, shared by all processes
with the same ABI, has no process private data.
The primary purpose of the vDSO:
- non-executable stack, signal trampolines not copied to the stack;
- signal trampolines unwind, mandatory for the NPTL;
- to avoid contex-switch overhead frequently used system calls can be
implemented in the vDSO: for now gettimeofday, clock_gettime.
The first two have been implemented, so add the implementation of system
calls.
System calls implemenation based on a native timekeeping code with some
limitations:
- ifunc can't be used, as vDSO r/o mapped to the process VA and rtld
can't relocate symbols;
- reading HPET memory is not implemented for now (TODO).
In case on any error vDSO system calls fallback to the kernel system
calls. For unimplemented vDSO system calls added prototypes which call
corresponding kernel system call.
Tested by: trasz (arm64)
Differential revision: https://reviews.freebsd.org/D30900
MFC after: 2 weeks
Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.
Fixes
-----
BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
Implement dumping core for Linux binaries on amd64, for both
32- and 64-bit executables. Some bits are still missing.
This is based on a prototype by chuck@.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30019
