which can be used to turn off multicast pfsync support, and enable
the transmission of directed PFSYNC (IP protocol: 240) packets to
a specific "sync peer" host.
PR: conf/111225
Submitted by: Bas van Beek <bas@tobin.nl>
Approved by: mtm, mlaier
MFC after: 2 weeks
tolerance. This driver allows aggregation of multiple network interfaces as
one virtual interface using a number of different protocols/algorithms.
failover - Sends traffic through the secondary port if the master becomes
inactive.
fec - Supports Cisco Fast EtherChannel.
lacp - Supports the IEEE 802.3ad Link Aggregation Control Protocol
(LACP) and the Marker Protocol.
loadbalance - Static loadbalancing using an outgoing hash.
roundrobin - Distributes outgoing traffic using a round-robin scheduler
through all active ports.
This code was obtained from OpenBSD and this also includes 802.3ad LACP support
from agr(4) in NetBSD.
the args for hash32_stre and hash32_strne but there are no consumers in the
base system and openbgpd does not use it which the initial import was for.
Silence on: hackers
unmount jail-friendly file systems from within a jail.
Precisely it grants PRIV_VFS_MOUNT, PRIV_VFS_UNMOUNT and
PRIV_VFS_MOUNT_NONUSER privileges for a jailed super-user.
It is turned off by default.
A jail-friendly file system is a file system which driver registers
itself with VFCF_JAIL flag via VFS_SET(9) API.
The lsvfs(1) command can be used to see which file systems are
jail-friendly ones.
There currently no jail-friendly file systems, ZFS will be the first one.
In the future we may consider marking file systems like nullfs as
jail-friendly.
Reviewed by: rwatson
obtaining and releasing shared and exclusive locks. The algorithms for
manipulating the lock cookie are very similar to that rwlocks. This patch
also adds support for exclusive locks using the same algorithm as mutexes.
A new sx_init_flags() function has been added so that optional flags can be
specified to alter a given locks behavior. The flags include SX_DUPOK,
SX_NOWITNESS, SX_NOPROFILE, and SX_QUITE which are all identical in nature
to the similar flags for mutexes.
Adaptive spinning on select locks may be enabled by enabling the
ADAPTIVE_SX kernel option. Only locks initialized with the SX_ADAPTIVESPIN
flag via sx_init_flags() will adaptively spin.
The common cases for sx_slock(), sx_sunlock(), sx_xlock(), and sx_xunlock()
are now performed inline in non-debug kernels. As a result, <sys/sx.h> now
requires <sys/lock.h> to be included prior to <sys/sx.h>.
The new kernel option SX_NOINLINE can be used to disable the aforementioned
inlining in non-debug kernels.
The size of struct sx has changed, so the kernel ABI is probably greatly
disturbed.
MFC after: 1 month
Submitted by: attilio
Tested by: kris, pjd
Add entries for the six persons listed in the first version of
commit.allow in the old FreeBSD 1 CVS repo.
Correct joergs date, and link him to jkh.
Add my own entry.
Have a look at committers-ports.dot for a start.
Simple command to generate the graph is:
$ dot -T png -o file.png file.dot
Dot can be installed via graphics/graphviz.
Discussed on: -developers
the mutex locked. Also tweak the wording to make it more consistant
between pthread_cond_wait and pthread_cond_tiedwait.
Confirmed with the opengroup's web site that this is a valid return
value. Wording used specifically not that of opengroup's online man
pages.
MFC After: 1 week
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes. Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
argument from a mutex to a lock_object. Add cv_*wait*() wrapper macros
that accept either a mutex, rwlock, or sx lock as the second argument and
convert it to a lock_object and then call _cv_*wait*(). Basically, the
visible difference is that you can now use rwlocks and sx locks with
condition variables using the same API as with mutexes.
This is supposed to be a brief overview of the locking primatives.
It is not yet complete and contains many place-holders for information
I do not know.
The locking is getting so diverse that I've lost track of it all.
We need this page to keep outselves in sync with what the primitives do.
note.. not part of the build yet.
the background fsck indefinitely. This allows the administrator to run
it at a convenient time. To support running it from cron, the
forcestart argument now causes the fsck to start with no delay and all
output to be suppressed.
event. Locking primitives that support this (mtx, rw, and sx) now each
include their own foo_sleep() routine.
- Rename msleep() to _sleep() and change it's 'struct mtx' object to a
'struct lock_object' pointer. _sleep() uses the recently added
lc_unlock() and lc_lock() function pointers for the lock class of the
specified lock to release the lock while the thread is suspended.
- Add wrappers around _sleep() for mutexes (mtx_sleep()), rw locks
(rw_sleep()), and sx locks (sx_sleep()). msleep() still exists and
is now identical to mtx_sleep(), but it is deprecated.
- Rename SLEEPQ_MSLEEP to SLEEPQ_SLEEP.
- Rewrite much of sleep.9 to not be msleep(9) centric.
- Flesh out the 'RETURN VALUES' section in sleep.9 and add an 'ERRORS'
section.
- Add __nonnull(1) to _sleep() and msleep_spin() so that the compiler will
warn if you try to pass a NULL wait channel. The functions already have
a KASSERT to that effect.
interrupt sleeps. Rather, unmasked signals interrupt restarts and can
either interrupt the system call by having it return EINTR in userland or
force the system call to be restarted.
- Don't claim that the mutex is atomically reacquired when a cv_wait
routine returns. There's nothing atomic or magical about the lock
reacquire. The only magic is that we atomically drop the lock by
placing the thread on the sleep queue before dropping the lock.
- Markup sx_unlock() as a function rather than saying it is a macro.
The macro part is an implementation detail, and all the other sx_*lock()
functions are actually macros, too.
- Use the same style as rwlock(9) and mutex(9) to markup sx_assert() and
SX_SYSINIT() with respect to headers and kernel options.
- Add a missing MLINK.
for /tmp and /var. This makes the memory discs swap-backed instead
of malloc-backed. A swap-backed memory disc should not be worse
than a malloc-backed one in any scenario because it will start
touching swap only when needed. OTOH, a malloc-backed disc can
starve limited kernel resources and evenually crash the system.
Reflect the change in the rc.conf(5) manpage. Also stop telling
lies there about softupdates: it does not waste disc space, it
just can delay its freeing.
Suggested by: many
PR: kern/87255
MFC after: 1 week
<sys/extattr.h> to <ufs/ufs/extattr.h>. Move description
of extended attributes in UFS from man9/extattr.9 to
man5/fs.5.
Note that restore will not compile until <sys/extattr.h>
and <ufs/ufs/extattr.h> have been updated.
Suggested by: Robert Watson
While here, remove Xrefs to all other wlan drivers except the Intel ones,
these often get confused. Also remove pointers to the old ipw and iwi webpages,
they don't include any useful information that's not in the manpages yet.
Reviewed by: flz, ru
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.
Reviewed by: mlaier, sam
Permitted by: Intel (via Andrew Wilson)
MFC after: 1 month
o uniform the driver_intr_t parameter name to 'ithread'
o delete any reference to INTR_FAST
o document a bit the difference between the filter and ithread
argument
Reviewed by: mdoc-police (ru)
- the issues with wakeup_one are due to address space clashes between
unrelated groups of threads.
- sleep() was removed in FreeBSD 2.2.
- date the page today, not 4 days ago.
- replace grammatically correct "woken" with "woken up" for
consistency with the function name.
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF. Set to BPF_D_IN to see only incoming packets on the
interface. Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface. Set to BPF_D_OUT to see only outgoing
packets on the interface. This setting is initialized to BPF_D_INOUT
by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.
- BIOCFEEDBACK sets packet feedback mode. This allows injected packets
to be fed back as input to the interface when output via the interface is
successful. When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication. This flag is initialized to
zero by default.
Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.
Reviewed by: rwatson
attribute. Also define some macros to manipulate one of these
structures. Explain their use in the extattr.9 manual page.
The next step will be to make a sweep through the kernel replacing
the old pointer manipulation code. To get an idea of how they would
be used, the ffs_findextattr() function in ufs/ffs/ffs_vnops.c is
currently written as follows:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eap, u_char **eac)
{
u_char *p, *pe, *pn, *p0;
int eapad1, eapad2, ealength, ealen, nlen;
uint32_t ul;
pe = ptr + length;
nlen = strlen(name);
for (p = ptr; p < pe; p = pn) {
p0 = p;
bcopy(p, &ul, sizeof(ul));
pn = p + ul;
/* make sure this entry is complete */
if (pn > pe)
break;
p += sizeof(uint32_t);
if (*p != nspace)
continue;
p++;
eapad2 = *p++;
if (*p != nlen)
continue;
p++;
if (bcmp(p, name, nlen))
continue;
ealength = sizeof(uint32_t) + 3 + nlen;
eapad1 = 8 - (ealength % 8);
if (eapad1 == 8)
eapad1 = 0;
ealength += eapad1;
ealen = ul - ealength - eapad2;
p += nlen + eapad1;
if (eap != NULL)
*eap = p0;
if (eac != NULL)
*eac = p;
return (ealen);
}
return(-1);
}
After applying the structure and macros, it would look like this:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eapp, u_char **eac)
{
struct extattr *eap, *eaend;
eaend = (struct extattr *)(ptr + length);
for (eap = (struct extattr *)ptr; eap < eaend; eap = EXTATTR_NEXT(eap)){
/* make sure this entry is complete */
if (EXTATTR_NEXT(eap) > eaend)
break;
if (eap->ea_namespace != nspace ||
eap->ea_namelength != length ||
bcmp(eap->ea_name, name, length))
continue;
if (eapp != NULL)
*eapp = eap;
if (eac != NULL)
*eac = EXTATTR_CONTENT(eap);
return (EXTATTR_CONTENT_SIZE(eap));
}
return(-1);
}
Not only is it considerably shorter, but it hopefully more readable :-)
want an equivalent of DELAY(9) that sleeps instead of spins. It accepts
a wmesg and a timeout and is not interrupted by signals. It uses a private
wait channel that should never be woken up by wakeup(9) or wakeup_one(9).
Glanced at by: phk
transition to mbuma (FreeBSD 5.3) and the fact that mbufs are now limited
almost entirely to packet storage, with straight UMA zones being used for
most other network data types.
Apart from minor cleanup of the text, it should document
in reasonable detail what the status of the code is.
RELENG_6 has some minor differences there in the way automatic
loading/unloading is handled, but hopefully this should be
fixed by MFC time.
The examples come from Max Laier and Sam Leffler.
MFC after: 1 week
Note: This also deprecates "NO" as a way to specify an empty list of
interfaces for gif_interfaces.
PR: conf/104884
Submitted by: nork
Harassed by: brd
Discussed with: brooks, dougb
The patch from the PR was a little outdated w/regards to the
Vodafone vendor string.
PR: kern/106033
Submitted by: Volker Werth <volker_AT_vwsoft.com>
MFC in: 3 days
Make devfs cloning a sysctl/tunable which defaults to on.
If devfs cloning is enabled, only the super-user may create
tun(4)/tap(4)/vmnet(4) instances. Devfs cloning is still enabled by
default; it may be disabled from the loader or via sysctl with
"net.link.tap.devfs_cloning" and "net.link.tun.devfs_cloning".
Disabling its use affects potentially all tun(4)/tap(4) consumers
including OpenSSH, OpenVPN and VMware.
PR: 105228 (potentially also 90413, 105570)
Submitted by: Landon Fuller
Tested by: Andrej Tobola
Approved by: core (rwatson)
MFC after: 4 weeks
world order:
mount -t linsysfs linsys /compat/linux/sys
instead of mount_linsysfs. Now that 6.X requires mount_linsysfs to
work. This is why there is a mount_linsysfs in 6.X and not in -current.
Prompted by: ru
Reviewed by: ru, rodrigc
NetBSD version is a feature-to-feature re-implementation of GNU
gzip using the freely-redistributable zlib and this version is
expected to be mostly bug-to-bug compatible with the GNU
implementation.
- Because this is a piece of mature code and we want to make
changes so it is added directly rather than importing to
src/contrib.
- Connect newly added code to src/usr.bin/ and rescue/rescue
build.
- Disconnect the GNU gzip code from build for now, they will
be eventually removed completely.
- Provide two new src.conf(5) knobs, WITHOUT_BZIP2_SUPPORT and
WITHOUT_BZIP2.
Tested by: kris (full exp-7 pointyhat build)
Approved by: core (importing a 4-clause BSD licensed file)
Approved by: re (adding new utility during -HEAD code slush)
Point out that FreeBSD libc has compat stubs for GNU glibc NSS
modules which access NSDB_PASSWD/NSDB_GROUP, but not NSDB_HOSTS;
based on painful experience porting nss_mdns.
Reviewed by: ru
and add a list of known-working PCI devices.
- For consistency throughout this man page also talk about C-Bus and
ISA adapters rather than cards.
- Add missing .Tn.
- Mention ifconfig(8) along with listing selectable media types.
- Add/un-comment hardware notes for the newly supported 'lebuffer'
variants (the transition from P/N 501-1860 to 501-1869 isn't a typo).
passed unmodified to gcc. Therefore, "prescott" should be used for Prescott,
Nocona, Core and Core 2 CPUs when building 32-bit code, and "nocona" should
be used for Prescott, Nocona and Core 2 CPUs when building 64-bit code.
MFC after: 3 weeks
Approved by: gnn
Add a new function hashinit_flags() which allows NOT-waiting
for memory (or waiting). The old hashinit() function now
calls hashinit_flags(..., HASH_WAITOK);
Document my recent changes to rc.subr(8):
- there is $required_modules now;
- $required_* are checked before invoking a custom start method, too.
MFC after: 1 month
behave as expected.
Also:
- Return an error if WD_PASSIVE is passed in to the ioctl as only
WD_ACTIVE is implemented at the moment. See sys/watchdog.h for an
explanation of the difference between WD_ACTIVE and WD_PASSIVE.
- Remove the I_HAVE_TOTALLY_LOST_MY_SENSE_OF_HUMOR define. If you've
lost your sense of humor, than don't add a define.
Specific changes:
i80321_wdog.c
Don't roll your own passive watchdog tickle as this would defeat the
purpose of an active (userland) watchdog tickle.
ichwd.c / ipmi.c:
WD_ACTIVE means active patting of the watchdog by a userland process,
not whether the watchdog is active. See sys/watchdog.h.
kern_clock.c:
(software watchdog) Remove a check for WD_ACTIVE as this does not make
sense here. This reverts r1.181.
- Move mentionings of required drivers to the SYNOPSIS where they belong
- Remove cruft (XiG, sheesh) from the EXAMPLES section and re-arrange things to make
somewhat more sense
- Fix an Xref to manpage from ports to mention the corresponsing port
- Remove commented out HISTORY section header
MFC after: 3 days
revision 1.199
date: 2004/09/24 08:30:57; author: phk; state: Exp; lines: +0 -1
Remove the cdevsw() function which is now unused.
(the log is wrong, it was really devsw that was removed).
# we really need to actually document the functions in sys/conf.h as well
# as things like d_open...
Remove reference to mount_fdescfs(8), since mount(8) calls nmount()
directly to mount an fdescfs filesystem, instead of forking an
external mount_fdescfs program.
which allows to use it with different kinds of locks. For example it allows
to implement Solaris conditions variables which will be used in ZFS port on
top of sx(9) locks.
Reviewed by: jhb
want to confuse people at the very beginning.
Sync TOC/paragraph numbers in the text.
Requested by: Benedikt Stockebrand during his talk at EuroBSDCon 2006
Reviewed by: gnn
privilege for threads and credentials. Unlike the existing suser(9)
interface, priv(9) exposes a named privilege identifier to the privilege
checking code, allowing more complex policies regarding the granting of
privilege to be expressed. Two interfaces are provided, replacing the
existing suser(9) interface:
suser(td) -> priv_check(td, priv)
suser_cred(cred, flags) -> priv_check_cred(cred, priv, flags)
A comprehensive list of currently available kernel privileges may be
found in priv.h. New privileges are easily added as required, but the
comments on adding privileges found in priv.h and priv(9) should be read
before doing so.
The new privilege interface exposed sufficient information to the
privilege checking routine that it will now be possible for jail to
determine whether a particular privilege is granted in the check routine,
rather than relying on hints from the calling context via the
SUSER_ALLOWJAIL flag. For now, the flag is maintained, but a new jail
check function, prison_priv_check(), is exposed from kern_jail.c and used
by the privilege check routine to determine if the privilege is permitted
in jail. As a result, a centralized list of privileges permitted in jail
is now present in kern_jail.c.
The MAC Framework is now also able to instrument privilege checks, both
to deny privileges otherwise granted (mac_priv_check()), and to grant
privileges otherwise denied (mac_priv_grant()), permitting MAC Policy
modules to implement privilege models, as well as control a much broader
range of system behavior in order to constrain processes running with
root privilege.
The suser() and suser_cred() functions remain implemented, now in terms
of priv_check() and the PRIV_ROOT privilege, for use during the transition
and possibly continuing use by third party kernel modules that have not
been updated. The PRIV_DRIVER privilege exists to allow device drivers to
check privilege without adopting a more specific privilege identifier.
This change does not modify the actual security policy, rather, it
modifies the interface for privilege checks so changes to the security
policy become more feasible.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
POSIX advice to just ignore the operation and return 0.
We already handle this case in kern_rename(), but don't give bad example -
the source is not removed.
to WITH_CDDL.
This option enables building code that is licensed under Sun's CDDL.
The DTrace code is licensed that way, so by default it will get built
unless the WITHOUT_CDDL option is used.
There is another build toggle, NO_CTF, which turns off execution of
ctfconvert and ctfmerge in sys.mk, but this can't be implemented as
WITH_/WITHOUT because bsd.own.mk isn't included in all Makefiles and
sys.mk is included automatically by make.
* USB HID Usage Tables, V1.12
* USB Monitor Control Class Specification, V1.0
* USB Usage Tables for HID Power Devices, V1.0
* USB Device Class Definition for Physical Devices, V1.0
* USB HID Point of Sale Usage Tables, V1.02
- Fix spelling of 'Microsoft'
- Bring the so called Microsoft page, in line with the style of the rest of
the file.
- Remove NetBSD version string as it doesn't reflect reality any longer
Approved by: emax (mentor)
- s/ip.forwarding/net.inet.ip.forwarding/ to match reality [1]
Approved by: keramida (mentor), trhodes (mentor)
MFC after: 5 days
Submitted by: Tom McLaughlin via #bsddocs
: revision 1.13
: date: 2002/04/03 15:44:53; author: phk; state: Exp; lines: +0 -5
: Initial deorbit burn for the undocumented and unused d_boot[01]
: fields of struct disklabel.
:
: Sponsored by: DARPA and NAI Labs.
: ----------------------------
: revision 1.15
: date: 2002/05/12 20:49:33; author: phk; state: Exp; lines: +1 -3
: Retire the bogus uses of the disklabel field d_sbsize and begin to
: initialize it to zero so we don't have to have everbody and their
: aunt including FFS specific header files.
:
: Sponsored by: DARPA & NAI Labs.
(the group of watchpoint commands, and the `reset' command).
NetBSD has sorted everything alphabetically, but I think we would have
too many commands for that if all commands were actually documented
here, so this commit moves towards alphabetical order in several sections:
- section for pure ddb (non-"show") commands. Now contains the watchpoint
commands and is mostly in "logical" order.
- section for pure ddb "show" commands
- similarly for auxilary commands. Most of these are currently missing
here.
- Add entries in the uscanner.4 man page (along with missing 3500).
PR: usb/100957 [1], usb/100992 [2]
Submitted by: Jim Teresco <terescoj@teresco.org> [1],
Walter C. Pelissero <walter.pelissero@iesy.net> [2]
MFC after: 3 days
default. Grepping through src shows only gnu/usr.bin/groff which doesn't
use it in src build and OpenSSH for which this was a NOOP.
Discussed with: des, ru
Approved by: ru
unsuspecting users.
- Add a comment in NOTES about experimental status of SCHED_ULE.
- Make warning about experimental status in sched_ule(4) a bit
stronger.
Suggested and reviewed by: dougb
Discussed on: developers
MFC after: 3 days
this for 'initiator id'- this is a stopgap until a sparse map is
added.
Make compat defines for offset format (FreeBSD 5 or less).
Add no-asyncio flag. There's some breakage with ASYNC I/O that every
now and then drops us into an infinite loop. This also then does
a fallback to no-asyncio if the AIO option isn't loaded/compiled into
the kernel.
A number of other chanes to try and track some breakage.
- Change variable name to 'error', as this is what is mostly used for
functions that return an error.
- Add mutex(9) to the SEE ALSO section.
- Bump the date.
I don't really like the example code. I'd prefer symmetry where possible, eg.
mtx_lock(&example_lock);
error = example(NULL, EXAMPLE_ONE);
mtx_unlock(&example_lock);
if (error != 0)
return (error);
But I'll leave it as it is for now.
Reviewed by: simon
Frames, mention the one chip that does not support them (obtained from
the driver README)
- Mention TSO and the chips that do not support it (provided by pdeuskar)
- Do not refer to the README for VLAN support, building and installing
the driver
asserts and makes binaries smaller. The binaries also become
repeatable again. As it was, without this md5's of binaries built
with different paths differed.
# Where do I document this?
and LOADER_TFTP_SUPPORT options into the world section since boot
blocks are built as part of the world.
- Document BOOT_PXELDR_ALWAYS_SERIAL and BOOT_PXELDR_PROBE_KEYBOARD
options of pxeboot(8).
MFC after: 3 days
- Talk about supported chips rather than supported cards as the majority
of the hardware supported by gem(4) is on-board.
- "the .Nm driver"
- Sort the list of supported chips alphabetically.
- Sun GEM aren't used on-board though, so don't claim they'd be.
- Add a CAVEATS section informing that Sun GEM cards aren't supported
so far.
MFC after: 1 day
in order to simplify matters for people who are looking for a video
card supported by FreeBSD/sparc64.
- Add Sun PGX to the list of known working cards.
MFC after: 1 day
audit record size at run-time, which can be used by the user
process to size the user space buffer it reads into from the audit
pipe.
Perforce change: 105098
Obtained from: TrustedBSD Project
override NM in Makefiles when, for example, cross compiling and have
that value be used by lorder. NM normally isn't defined, so we pass a
null value to lorder. lorder says 'NM=${NM-nm}' which causes it to
pickup the default value.
that it is not possible to use Fast IPsec in conjuction with KAME IPsec
- add available kernel options to ipsec(4)
- add reference for fast_ipsec(4) to ipsec(4)
Reviewed by: trhodes (mentor), keramida (mentor)
Approved by: keramida (mentor)
certain conditions. I haven't been able to find a better solution yet:
- Set a two read-only variables (${prefix} and ${etcdir}). This is
especially useful when using /etc/rc.d scripts with third-party
software installed from ports.
- Fix rc.d/sshd to work with openssh from ports using ${etcdir}
instead of hardcoded /etc.
- Reflect prefix/etcdir changes in rc.subr.8.
src/etc/rc.d/sshd: rev 1.9 -> 1.10
src/etc/rc.subr: rev 1.51 -> 1.52
src/share/man/man8/rc.subr.8: rev 1.11 -> 1.12
Approved by: cperciva (mentor)
despite the interface link status.
Add dhclient_flags_iface and background_dhclient_iface rc.conf options.
(where iface is a specific interface). These can be used to give
interface specific flags to dhclient.
Reviewed by: brooks@
of C in which the program or library is written.
Note that this is *not* intended to be used across the whole tree. It
is intended to be used for individual libraries or programs which use
specific language features which the compiler must know about in order
to produce correct warnings at high WARNS levels.
MFC after: 1 month
before tagging them. This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum. This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b. It's controlled by sysctl net.link.vlan.soft_pad.
Idea by: az
MFC after: 1 week
- Added check of dirs used by example generator
- Fixed path for ${s}/conf/files.FOO and include it via files
directive from config file
- Changed kernel configuration example with the driver: it is
not produced by copying Generic but by including it
- KDB is added to config (for DDB)
- Added module building instead and fixed kernel building
Reviewed by: julian@
- Store the Ethernet header in node softc.
- Initialize header with dst addr and ethertype in node
constructor method.
- In node connect method send NGM_ETHER_GET_ENADDR message
downwards.
- If received reply from ng_ether(4) store the src addr
in softc.
- Add NGM_PPPOE_SETENDADDR message that allows user to
override the address with whatever he/she wants.
- "Ns No" is redundant, so reduce it to just "Ns";
- use Li to mark up CPU and system power states because here they are
just strings to be typed literally (add more such mark-up as well);
- the best practice of typesetting tells us to use an en-dash to
indicate a closed range; fortunately, groff_char(7) provides such a symbol.
In addition, consistently use a comma between independent clauses
coordinated by a conjunction.
Pointed out by: ru (mark-up part)
MFC after: 3 days
- Fixed path for ${s}/conf/files.FOO and a note that it should be merged into
corresponding file to be able to compile the kernel
- Changed kernel configuration example with the driver: it is not produced by
copying Generic but by including it
- Changed from automatic module building to asking an user if it whants to
Reviewed by: julian@
PowerPC-based Apple's machines and small utility to do it from
userland modelled after the similar utility in Darwin/OSX.
Only tested on 1.25GHz G4 Mac Mini.
MFC after: 1 month
This confused the manual page -> hardware notes perl script somewhat and
resulted in part of the output for the stge(4) entry not to be present
in the hardware notes.
Noticed by: brueffer
- Unicode 4.1 related changes:
- Add definitions for a new range of code points
U+1DC0..U+1DFF "Combining Diacritical Marks Supplement".
- Add U+04F6 and U+04F7 to the Cyrillic range.
- Mark U+034F "Combining Grapheme Joiner" as non-printable.
- Add new combining characters in the range U+0350..U+035F
to the section "Combining Diacritical Marks".
PR: misc/100212 [1]
Submitted by: "J.R. Oldroyd" <<fbsd AT opal.com>>
Reviewed by: "J.R. Oldroyd" <<fbsd AT opal.com>> (revised patch)
Prevent casual modification by requiring hw.acpi.thermal.user_override to
be set first. Fix printing of negative temperatures in the K->C conversion.
Document the remaining thermal sysctls.
MFC after: 3 days
and replace it with a new ntpdate_config variable.
- Document it in defaults/rc.conf and rc.conf.5.
- Document ntpdate_hosts in defaults/rc.conf.
Requested by: Chris Timmons <cwt@networks.cwu.edu>
Approved by: cperciva (mentor, implicit)
MFC after: 1 week
This driver was ported from OpenBSD by Shigeaki Tagashira
<shigeaki@se.hiroshima-u.ac.jp> and posted at
http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html
It was additionally cleaned up by me.
It is still a work-in-progress and thus is purposefully not in GENERIC.
And it conflicts with nve(4), so only one should be loaded.
encryption. There are two functions, a bpf tap which has a basic header with
the SPI number which our current tcpdump knows how to display, and handoff to
pfil(9) for packet filtering.
Obtained from: OpenBSD
Based on: kern/94829
No objections: arch, net
MFC after: 1 month
latter is a PCIe 10/100 chip.
Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to access the EEPROM, we must select 'EEPROM programming'
mode, and then set the EEPROM chip select bit. Previously, we were setting
both bits simultaneously, which doesn't work: they must be set in the
right sequence.
Always obtain the station address from the EEPROM, now that EEPROM
reading works correctly.
Make the TX interrupt moderation code based on the internal timer
optional and turned off by default.
Make the re_diag() routine conditional and off by default. When it is
on, only use it for the original 8169, which was the only device that
that really needed it.
Modify interrupt handling to use a fast interrupt handler and fast
taskqeueue.
Correct the rgephy driver so that it only applies the DSP fixup for
PHY revs 0 and 1. Later chips are fixed and don't need the fixup.
Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
autoneg mode. A couple of the devices don't autoneg correctly unless
configured this way.
of them do that conditionally depending on kldstat. The code is
duplicated all over, but bugs can be uniqie.
To make the things more consistent, introduce a new rc.subr function,
load_kld, which takes care of loading a kernel module conditionally.
(Found this lying for a while in my p4 branch for various hacks.)
- Curitel PC5740 Wireless Modem (Verizon's PCMCIA card)
- Sierra MC5720 Wireless Modem (Built in to Thinkpad X60s)
Bump the date in the uscanner man page for the update some minutes ago.
- Convert to our standard SYNOPSIS layout
- Remove the kld from FILES, it's now mentioned in the SYNOPSIS
- Remove useless .Pp call at eof
MFC after: 3 days
s/myri10ge/mxge/g replacement in the myri10ge files. A few contuation
lines were joined because of the regained columns.
- Hook the mxge driver back to the build.
1.198 of "sys/sys/vnode.h". Remove a cross-reference to a manual
page that never existed.
---------------------------------------------------------------------- CVS:
PR: Fill this in if a GNATS PR is affected by the
change. CVS: Submitted by: Fill this in if someone else sent
in the change. CVS: Reviewed by: Fill this in if someone else
reviewed your modification. CVS: Approved by: Fill this in if
you needed approval for this commit. CVS: Obtained from: Fill
this in if the change is from third party software. CVS: MFC after:
N [day[s]|week[s]|month[s]] CVS: Fill in to get MFC notification
later. (days assumed unless specified) CVS:
---------------------------------------------------------------------- CVS:
Enter Log. Lines beginning with `CVS:' are removed automatically
- K&R -> ANSI prototype [O]
- Do not bother to do free right before exit() or execve() [O]
- Remove some dead code in addarg()
- Make additional parameters specified in mailer.conf(5)
actually work and document the fact. [N]
- Avoid using __progname but instead use getprogname()
and setprogname() to provide more sensible messages. [O, N]
- Update $OpenBSD$ and $NetBSD$ to reflect the fact that we
have sync'ed with their code.
- WARNS=6
Obtained from/Inspired by: OpenBSD [O], NetBSD [N] (partially)
- Remove "device cryptodev" as it is not needed for compiling padlock(4)
into the kernel. Actually it is not advisable, because padlock
instructions can be used directly from userland, so passing the work
through the kernel is a bad idea.
automaticly add it to an Ethernet bridge. This is intended for applications
such as qemu, vmware, openvpn, ... which open tap interfaces and need them
bridged with the hosts network adapter, the user can set up a glob for
interfaces to be automatically added (eg tap*).
1,2 and so on.
It specifies the command to be run as Nth after jail startup.
sh(1)-fu by: Dario Freni
PR: conf/97697
MFC after: 2 weeks
Reviewed by: ru@ (man page)
is not interesting, when the driver appeared is. Most people who use this
example leave the manpage appearance date in and the driver date out.
MFC after: 3 days
scripts. These scripts handle vnode backed md(4) devices.
Old ramdisk{,-own} scripts will stay a bit in CVS to allow some time for
migration since variable names have changed (ramdisk_* -> mdconfig_*).
Two new variables have been introduced to be able to populate the md(4)
device once it has been mounted (mdconfig_*_files and mdconfig_*_cmd).
Use should be as easy as:
mdconfig_md0="-t malloc -s 10m"
mdconfig_md1="-t vnode -f /var/foo.img"
See rc.conf(5) for more information and description of the additional
variables.
Approved by: cperciva
text and, as a result, 'FreeBSD' is not visible in apropos output
when security(7) is displayed. Fix this buglet by using a
literal 'FreeBSD' string in .Nd
PR: docs/85986
Submitted by: Matthias Schmidt <schmidtm@mathematik.uni-marburg.de>
MFC after: 1 week
list of Atheros-based cards from ath(4). The online list is
always more up to date, anyway.
This invalidates:
PR: docs/95360
Submitted by: Erik Nordstr:om Andersen <erik@erik-n-andersen.dk>
to device hints was committed. The GENERIC kernel configuration lost
its 'device fd' line at revision 1.260, committed by peter@ on
2000/06/13 22:28:46 UTC.
Delete the reference to 'device fd', to avoid kernel build breakage like
the one described in the PR audit trail.
PR: docs/91448
Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru>
MFC after: 1 week
issue where some global jail_* variables were overriden in the script. [1]
- Change "jid" to "jname" in rc.conf(5), since it's more a jail name than a
jail id. [1]
- Update examples and comments in defaults/rc.conf to advertise new
variables and the fact that some of the jail-specific variables may be made
jail-global. [2]
Reported by: pjd [1], clsung [2]
Approved by: cperciva
X-MFC after: i got sufficient testing from people using rc.d/jail
Updates to historic rules only for: part of Alaska, Algeria, Bulgaria,
Colombia, Easter Island, Italy, Malta, Mexico, Mongolia, Montserrat,
Puerto Rico, Poland, Russia, South Korea, Spain, part of North Dakota,
United Kingdom, Uruguay, Uzbekistan
Updates to current and future rules for: Guatemala, Haiti, Honduras,
part of Indiana, Iran, Nicaragua, Palestinian Territories, Sri Lanka,
Tunisia,
Updates to future rules only for: Canada, Thule AFB in Greenland
particular importance to those living in the Western Hemisphere as
many non-U.S. zones will be changing DST rules next year to match the
U.S.
Obtained from: Arthur David Olson, ftp://elsie.nci.nih.gov/
subdirectories that will be used for removable media mount points (i.e.
mount points for CDs, floppy disks, USB drives, etc.). While the primary
purpose of /media is to provide a location for HAL
(http://www.freedesktop.org/wiki/Software_2fhal) to mount volumes, it could
be used by any application that needs to manage removable media volumes.
Discussed on: arch@
Approved by: mux
MFC after: 1 week
Now ncurses-based programs such as sysinstall and mc will display the
correct font for graphical lines instead of "-" and "+" characters.
Correct two special characters for cons25l1 in termcap: use real
arrows instead of ">>" and "<<".
Add a lot of additional symbols for line drawing which are taken from
the CP437 font.
Almost all of the ACS symbols are now implemented.
PR: conf/90082
Submitted by: Oliver Fromme <olli@secnetix.de>
MFC after: 1 week
pages existed only for the dynamic sysctl interfaces. There's probably
more complete and accurate content, better advice, etc, that could be added
here.
Per scottl's suggest, add a small piece of moralizing text regarding the
fact that sysctl names quickly get embedded in system configuration files,
libraries, third party applications, and even books, so renaming and
removing names after they've been published is a tricky issue.
MFC after: 1 month
- Describe msleep() as the primary sleep function now rather than tsleep()
and describe tsleep() and msleep_spin() as variations.
- Try to make the description of msleep() a bit closer to English
(sentences with actual subjects, etc.)
- Document that a priority of 0 now prevents the thread's priority from
being altered.
- Add a history note for wakeup_one().
working on.
1) Make it possible to configure interfaces with certain characters in
their names that aren't valid in shell variables. Currently supported
characters are ".-/+". They are converted into '_' characters.
2) Replace nearly all eval statements in network.subr with a new
function get_if_var which substitues an interface name (after the
translations above) for "IF" in a variable name.
3) Fix list_net_interfaces() in the nodhcp case.
4) Allow the administrator to specify if dhclient should be started
when /etc/rc.d/netif configures the interface or only by devd.
This can be set on both a per interface and system wide basis.
PR: conf/88974 [1,2], conf/92433 [1,2]
set:
* jail_mount_enable
* jail_devfs_ruleset
* jail_devfs_enable
* jail_fdescfs_enable
* jail_procfs_enable
* jail_fstab
* jail_flags
- Add a jail_interface / jail_<jid>_interface option. An ip alias will be
created (jail_<jid>_ip) on jail_interface or jail_<jid>_interface if set.
This is not a mandatory option.
- Document all missing jail_* options in rc.conf(5).
Approved by: cperciva (mentor)
MFC after: 2 weeks
o Add the scc(4) manpage to the build.
o Update the uart(4) manpage to account for scc(4).
o Update the uart(4) module build to include support for scc(4).
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
do.. This copies only part of the FILES section from sio(4)....
We might want to make tty(4) document the files provided, and have each of
these document the characters that it uses...
Pointed out by: Yasholomew Yashinski
MFC after: 3 days
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
a set of symbol definitions (VERSION_DEF) and symbol mappings
(SYMBOL_MAPS).
Add an awk script to generate the version map.
Suggested by: ru
Helped by: ru
Reviewed by: ru
end of a sentence. Ruslan notes that:
* The part about hexadecimal representation was intentional -- node ID
is parsed as the ng_parse_hint32_type, and is represented
(input/output) as a hexadecimal number
* "This value" was more correct, as the alternative name is
"[<value>]:" where <value> is hexadecimal value of the node ID.
* "ID based name" (which is "[<hexid>]:") was correct, and what's now is
incorrect -- node ID (number) cannot be equivalent to a name.
into a separate module. Accordingly, convert the option into a device
named similarly.
Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons.
Suggested by: scottl
Reviewed by: cokane
MFC after: 5 days
More info regarding these nics can be found at http://www.myri.com.
Please note that the files
sys/dev/myri10ge/{mcp_gen_header.h,myri10ge_mcp.h} are internally
shared between all our drivers (solaris, macosx, windows, linux, etc).
I'd like to keep these files unchanged, so I can just import newer
versions of them when the firmware API/ABI changes. This means I'm
stuck with some of the crazy-long #define names, and possibly
non-style(9) characteristics of these files.
Many thanks to mlaier for doing firmware(9) just as I
needed it, and to scottl for his helpful review.
Reviewed by: scottl, glebius
Sponsored by: Myricom Inc.
ENABLE_WPA_SUPPLICANT_EAPOL is no more, now use NO_WPA_SUPPLICANT_EAPOL
to build with only WPA-PSK support.
Reviewed by: ru, bsdimp (basic approach)
MFC after: 1 week
1. Remove a now-spurious NetBSD CVS Id, as we are no longer synching work
2. Remove a now-spurious BEFORE, since ntpdate now REQUIRE's named
3. Replace the call to set rcvar with what that function would output,
and generally reduce indirection ($name -> named) since it's highly
unlikely the name of the named process or service will change any time soon.
4. Resort the order the variables at the top of the file to a more
traditional format, and remove a spurious required_dirs from the top, as it
works better after load_rc_config.
5. We do not want the default reload method with named, so define a simple
but appropriate substitute using rndc. If I were writing this script for
the first time I would not include this at all, since it's preferable to
control a running daemon with rndc to start with, but given that this is
already here, let's do it right. I hope that future generations will
however resist the tempation to add reconfig to extra_commands.
6. By the same token, we want to use rndc to shut down named, but given
that by defining a stop function we lose the "find the process by its
pid file in an emergency" goodness of rc.subr, try to do something useful
in the event that rndc is not available, and keep the user informed.
7. Replace some "test -f" with "test -r" to handle the unlikely event
that the relevant file exists, but is unreadable.
8. Twiddle whitespace in a few areas, remove a spurious blank line,
a bogus double space, and try to do better indenting.
9. Improve generation of the rndc.key file significantly
a. If for some reason a user has an rndc.conf file, assume that they
did that on purpose, and hence know what they are doing, so leave them alone.
b. Introduce a named_uid configuration variable so that the user which owns
the rndc.key file and the user named runs as always match, and is more
easily configurable. This should dramatically reduce problems with rndc.
c. Also test that the rndc.key file size is greater than zero, rather than
simply that the file exists. I have seen at least one user report this exact
problem, and although neither of us is sure where the empty file came from,
the fix is simple, so include it.
d. Rather than try to create an rndc.key file in both /etc/namedb and the
chroot'ed /etc/namedb, assume that they are be the same (which they should
be), and only create the file in the chroot'ed version of the directory.
This partially addresses the problem described in conf/73929, but I have
not yet finished thinking about the PREFIX issue that PR also raises.
As a result of introducing the named_uid knob, the default named_flags
are now empty.
Update defaults/rc.conf and rc.conf(5) to reflect these changes.
But it returned 1.
It fixes the problem reported by many Japanese people that tcsh 6.14
doesn't work correctly with ja_JP.eucJP locale.
PR: conf/79701
Submitted by: Kazuaki Oda <ybbkaz__at__yahoo.co.jp>
Tested by: many people
MFC after: 1 week
to work with ipmitools. It works with other tools that have an OpenIPMI
driver interface. The port will need to get updated to used this.
I have not implemented the IPMB mode yet so ioctl's for that don't
really do much otherwise it should work like the OpenIPMI version.
The ipmi.h definitions was derived from the ipmitool header file.
The bus attachments are done for smbios and pci/smbios. Differences
in bus probe order for modules/static are delt with. ACPI attachment
should be done.
This drivers registers with the watchdod(4) interface
Work to do:
- BT interface
- IPMB mode
This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64
kernel.
I will link this into the build on next week.
Tom Rhodes, helped me with the man page.
Sponsored by: IronPort Systems Inc.
Inspired from: ipmitool & Linux
to "tee" the BSM record stream for the purposes of live monitoring,
intrusion detection, etc. Support for audit pipes will be committed in
the near future.
Obtained from: TrustedBSD Project
was thinking from the pcn(4) perspective instead of the le(4) one when
writing the former version as le(4) supports a superset of the chips
supported by pcn(4) and not the other way round.
kernel audit facility, warnings about the experimental nature of this
implementation, and pointers at a large number of other audit related
man pages.
Obtained from: TrustedBSD Project
rev. 1.77, i.e. remove Am53C974/Am79C970/Am79C974 PCnet-PCI and Am79C970A
PCnet-PCI II.
- Change the entry of the PCnet-Home in the list of supported chips to
match the other ones, i.e. s,PCnet/Home HomePNA,Am79C978 PCnet-Home,.
- s,familly,family
MFC after: 1 day
It detects both: buffer underflows and buffer overflows bugs at runtime
(on free(9) and realloc(9)) and prints backtraces from where memory was
allocated and from where it was freed.
Tested by: kris
specially crafted module. There are several handrolled sollutions to this
problem in the tree already which will be replaced with this. They include
iwi(4), ipw(4), ispfw(4) and digi(4).
No objection from: arch
MFC after: 2 weeks
X-MFC after: some drivers have been converted
cards on the market.
- Remove the entire HARDWARE section. It's superfluous since all
snd_* manual pages have their own HARDWARE sections these days.
Reviewed by: brueffer
update the documentation to reflect that.
PR: docs/86090
Submitted by: Lowell Gilbert <freebsd-bugs-local at be-well dot ilk point org>
MFC after: 3 days
MFC to: RELENG_5, RELENG_6
same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey
and hw.syscons.kbd_reboot respectively.
Apologies to the submitter for taking so long to commit this simple
change.
PR: kern/72728
Submitted by: Luca Morettoni <morettoni at libero dot it>
MFC After: 3 days
I couldn't find the ID for the EG1064 anywhere in our sources
so I removed the reference for now.
Pointed out by: Robert Huff <roberthuffi at rcn dot com> [1]
Reviewed by: simon
restored when its removed from the bridge.
At the moment we only clear IFCAP_TXCSUM. Since a locally generated packet on
the bridge may be sent out any one or more interfaces it cant be assumed that
every card does hardware csums. Most bridges don't generate a lot of traffic
themselves so turning off offloading won't hurt, bridged packets are
unaffected.
Tested by: Bruce Walker (bmw borderware.com)
MFC after: 5 days
the names of directories to include in the base ldconfig script.
This will eliminate the need for each port to install its own
boot script which does nothing but ldocnfig a given directory.
This code was developed by flz (ports committer), discussed on
freebsd-rc@, and modified slightly by me.
Submitted by: flz
Reviewed by: brooks
function in years.
- Change the 'ident' paramters to 'wchan' to match <sys/systm.h>.
- Use 'otherwise' in place of 'else' in one place so that this reads like
English rather than C.
- Document the new msleep_spin() function.
- Add history notes for msleep() and msleep_spin().
USB device drivers use to talk to USB devices. This is probably
still a bit rough and it does not yet include the functions specific
to HID, ethernet, hubs, host controller drivers, task threads or
debugging.
Lose pointers to where these files were two major releases ago.
PR: docs/90370
Submitted by: Daniel Feenberg <feenberg at nber dot org>
Harassed by: Daniel Gerzo <danger at rulez dot sk>
variable ("YES" vs. "NO") and be more precise and intuitive on what is
actually allowed/restricted by this variable ("UNIX/IP/route sockets"
vs. "TCP/IP protocols").
MFC after: 3 days
ETHERTYPE_IPV6 frames. Change this to be a sysctl knob so that is able to still
bridge non-IP packets if desired.
Also return early if all pfil_* sysctls are turned off, the user obviously does
not want to filter on the bridge.
2005 when another one comes out. This one, even ADO hopes will be the
last of the year.
Obtained from: Arthur Olson, ftp://elsie.nci.nih.gov/pub/tzdata2005r.tar.gz
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.
Obtained from: NetBSD
MFC after: 2 weeks
by default, so add a new knob that is on by default, and check that
knob in start_precmd so that it can run even if cleaning /tmp is
not enabled. This has the advantage of not violating POLA, while
still allowing the user to disable this behavior if they wish (for
example on a server that will never run X).
to light by the PR. Specifically, convert these three scripts
into good rc.d citizens, making sure that their functionality
is preserved, but the rc.d framework rules are not broken.
Add support for cleanvar as a regular rc.d script in the
default rc.conf, and document this in the man page.
Add a descriptive comment to rc.conf that regarding the
three emulation/compatibility services provided by abi
so users will not be confused by these services not having
their own startup scripts.
PR: conf/84574
Submitted by: Alexander Botero-Lowry
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
as part of rc. Doing this, and the sourcing of rc.subr after we have
determined if we are booting diskless (and correspondingly run
rc.initdiskless if necessary) are safe, and actually allow fewer files
to be needed on the diskless box. This also allows variables from
the configuration to be available to rc itself, such as ...
Add a variable to rc.conf, early_late_divider, which designates the
script which separates the early and late stages of the boot process.
Default this to mountcritlocal, and add text to etc/defaults/rc.conf,
rc.conf(5) and diskless(8) which describes how and why one might want
to change this.
Reviewed by: brooks
ago. Document the real behavior of bus_dma_tag_create, bus_dmamap_load,
and other functions. Also document their arguments and return values.
MFC After: 3 days
now that all that stuff has been abstracted out of the disk drivers with
GEOM.
- Reference bsdlabel(8) rather than disklabel(8).
Ok'd by: phk, scottl (1)
Submitted by: Björn König (2)
refers to and add extra '#' comment characters at the beginning of two
lines that started with TABs, to avoid warnings like:
"/etc/make.conf", line 128: Unassociated shell command "# If set, you might need to adopt your"
"/etc/make.conf", line 129: Unassociated shell command "# nsswitch.conf(5) and remove `nis' entries."
PR: misc/89423
Submitted by: Scot W. Hetzel
- Remove the description of how to build a module.
- Remove the description of how to patch the sources.
- Refer to the polling(4) manpage on how to enable the polling mode.
- Tidy up markup.
bsd.incs.mk, and use it when installing 32-bit compat libraries
on amd64. This causes it to *not* overwrite native headers with
i386 versions, which was the case with <fenv.h> and <vgl.h>.
PR: amd64/83806
Prodded by: bde
MFC after: 1 week
more IPv4 address from a ranged list in CIRD notation:
ipv4_addrs_ed0="192.168.0.1/24 192.168.1.1-5/28"
In the process move alias processing into new ipv4_up/down functions to
more toward a less IPv4 centric world.
Submitted by: Philipp Wuensche <cryx dash freebsd at h3q dot com>
The following repo-copies were made (by Mark Murray):
sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c
sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h
share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
Use . instead of ${.OBJDIR}.
Move DEFSDIR and BMIBSDIR under the resp. .if clauses so that they
get defined only if DEFS and BMIBS are defined.
Submitted by: ru
use in-tree as well as for 3rd party modules. This file is more or less
what was in usr.sbin/bsnmpd/modules/Makefile.inc with some modifications
and omissions. Usage examples can be found under usr.sbin/bsnmpd/modules/*.
Idea by: phk
Reported by: scottl
I'm not very fond of using the non-standard lockf(1) here, but I
have no better idea at the moment. NetBSD uses ln(1) to create a
lock file, but this approach can result in a deadlock if make is
interrupted, leaving an orphaned lock file.
