Don't keep duplicate files in the files list just to
mark the device as "known" later. XXX: Since the
device list isn't unique (there can be two "device foo"
directives, as this the case with LINT+DEFAULTS), we
have to traverse it all to mark all copies of the same
device as "used", but this is not worse than it was.
proxy for hosts that are reachable through the same interface the
request came in from. This feature is mainly for hosts reachable
through some P2P link, e.g. the gif(4) tunnel.
when printing swapinfo output, rather than (total), as that is (strictly
speaking) more accurate.
Pointed out by: Rob <spamrefuse at yahoo dot com>
MFC after: 3 days
result in abort() beeing called. This is because there is a limit of
the number of groups in the RPC which is 16. When the actual number of
groups is too large it results in xdr_array() returning an error which,
in turn, authunix_create() handles by just calling abort().
Fix this by passing only the first 16 groups to authunix_create().
we're reading response headers. (Handle it as a connection-killing
error, rather than entering an infinite loop reading zero bytes.)
Reported by: simon
Discovered thanks to: A not-very-transparent transparent HTTP proxy.
MFC after: 3 days
given prefix is also used recursively for the dependency packages,
if any. If the -P flag appears after any -p flag on the
command line, it overrides it's effect, causing pkg_add to use the
given prefix recursively.
PR: bin/75742
Submitted by: Frerich Raabe <raabe AT kde DOT org>
MFC after: 3 days
into the contrib directory are still necessary for some of the Makefiles,
because the C-sources there use non-canonical includes ("" includes) to get
at the header files.
Clarify that it is not like the shlib versions, and not like param.h's
__FreeBSD_version/osreldate either.
When config(8) was actively changing a while back, the interface between
config and the build system (eg: /sys/conf/files.* and Makefile.*) was
changing rapidly. configvers is a version number of that interface.
User specified config files do not have a version number. The decision
about whether a user supplied config file is syntactically valid or not
belongs to the parser and sanity checks, not an arbitary number.
are synonymous, but ensure seems slightly closer and does not have the
connotation of buying insurance.
Reported by: Jason McIntyre <jmc at kerhand dot co dot uk>
directory before the specified config file. This is implemented by
opening DEFAULTS as stdin if it exists, and if so resetting stdin to the
actual config file when DEFAULTS is fully parsed via yywrap(). In short,
this lets us create DEFAULTS kernel configs in /sys/<arch>/conf that can
enable certain options or devices by default and allow users to disable
them via 'nooptions' or 'nodevice' rather than having to create kludge
NO_FOO options.
Requested by: scottl
Reviewed by: scottl
because it sets the floppy controller parameters, which requires O_RDWR.
Specifically, the FD_SOPTS ioctl requires this, and the code errors out
and aborts if it can't do it. Among other things, it is changing the
FDOPT_NOERRLOG flag. Broken in 6.0 as well.
to set the floppy controller parameters, but that requires that the
device node be open in O_RDWR mode now. I think it is broken in 6.0 as
well. This line looks like a stray anyway.
the start of the section headers has to take into account the fact
that the image_nt_header is really variable sized. It happens that
the existing calculation is correct for _most_ production binaries
produced by the Windows DDK, but if we get a binary with oddball
offsets, the PE loader could crash.
Changes from the supplied patch are:
- We don't really need to use the IMAGE_SIZEOF_NT_HEADER() macro when
computing how much of the header to return to callers of
pe_get_optional_header(). While it's important to take the variable
size of the header into account in other calculations, we never
actually look at anything outside the non-variable portion of the
header. This saves callers from having to allocate a variable sized
buffer off the heap (I purposely tried to avoid using malloc()
in subr_pe.c to make it easier to compile in both the -D_KERNEL and
!-D_KERNEL case), and since we're copying into a buffer on the
stack, we always have to copy the same amount of data or else
we'll trash the stack something fierce.
- We need <stddef.h> to get offsetof() in the !-D_KERNEL case.
- ndiscvt.c needs the IMAGE_FIRST_SECTION() macro too, since it does
a little bit of section pre-processing.
PR: kern/83477
the parent's signal mask. Once daemon() forked, signals would be ignored
in the child thread. While I'm here, check the return value of daemon().
This fixes termination in the daemon case (bug introduced in last commit).
Noticed by: Frederik Lindberg
status. Add a thread that waits for events on the named pipe instead of
polling the line status via apm or the ACPI sysctl. Additionally, use
robust error handling in case devd goes away or we temporarily can't set
a frequency (i.e., passive cooling has preempted our setting).
Later, this should be improved so that if adaptive control is not being used,
we will block while waiting for AC line events, saving a little CPU.
Submitted by: Frederik Lindberg <fli+freebsd-current/shapeshifter.se>
specified. The result is that the package will be listed with a '?'
as if it was not found within the INDEX file, so fix this behaviour.
* Remove trailing spaces.
PR: bin/87136
Submitted by: Sean Farley <sean-freebsd at farley dot org>
MFC after: 3 days
the pointer slowly wandering away on its own in an annoying way when the mouse
isn't physically moved.
PR: bin/83970
Submitted by: Lena -at- lena.kiev.ua
X-MFC after: 6.0-RELEASE
files fetched, FreeBSD release level) is transmitted to the portsnap
server when portsnap is run, but that this information is only used
anonymously and in aggregate.
core. This bug was made visible by a recent change to the audio/timidity++
port, which now has itself as a run dependency.
Reported by: Emil Mikulic, Andreas Klemm
when the base system is not compiled with NO_BIND set. Before we start
searching for mirrors, make sure that host(1) can be found, and if it
doesn't exist then fallback to the A record instead of the SRV records.
Submitted by: Luca Morettoni
linked process was exec()'ed, and map samples in that address range
into the appropriate buckets in the runtime loader's profile.
Improve a few comments.
MFC after: 3 days
Apologies to everyone who has run portsnap in 7.0-CURRENT since
Tuesday; if there is a file "/.portsnap.INDEX" on your system, you can
delete it (or even better, move it to /usr/ports/.portsnap.INDEX).
Big pointy hat to: cperciva
Reported that things weren't working properly: Aleksander Fafula
of the form "REFUSE foo" in portsnap.conf will result in parts of the
tree matching "^foo" being (a) not extracted by "portsnap extract", (b)
not updated by "portsnap update", and (c) not having any patches or new
ports downloaded by "portsnap fetch" or "portsnap cron". The example
shown in portsnap.conf demonstrates ignoring all the language categories.
As mentioned in portsnap.conf.5, the use of an imcomplete ports tree is
not officially supported; but this is something which many users have
requested, so I'm adding it anyway.
PR: bin/85619 (but not the patch provided therein)
MFC after: 1 month
Note, that when cron(8) cannot create pidfile, it'll exit. I didn't
changed this behaviour, but its better to ignore errors other than
EEXIST, so daemon can be started on systems where /var/ file system
doesn't support locking (like NFS without rpc.lockd(8)).
- Use pool.ntp.org servers where possible, thanks to
Chuck Swiger <cswiger at mac dot com> .
- Update list of Swedish NTP servers, thanks to
Fredrik Lindberg <fli+freebsd-current at shapeshifter dot se> .
PR: bin/75479
MFC after: 1 day
Trim trailing whitespace and comments before parsing, and skip empty lines.
Skip subvendor / subdevice entries (which start with two tab characters).
Change the scanf() format string to match any amount and type of whitespace
between the device ID and the description text.
MFC after: 3 weeks
1. Provide larger /, /var, and /tmp partitions (the last increase was
in 2001, and we now have both larger hard drives and more space-hungry
software.)
2. If there is enough space available, allocate extra space to /var
sufficient to store a crash dump.
On systems where harddrivesize > 3 * RAMsize + 10GB, the default sizes
will now be as follows:
swap RAMsize * 2
/ 512 MB
/tmp 512 MB
/var 1024 MB + RAMsize
/usr the rest (8GB or more)
On systems where harddrivesize > RAMsize / 8 + 2 GB, the default sizes
will be in the following ranges, with space allocated proportionally:
swap RAMsize / 8 -- RAMsize * 2
/ 256 MB -- 512 MB
/tmp 128 MB -- 512 MB
/var 128 MB -- 1024 MB
/usr 1536 MB -- 8192 MB
On systems with even less disk space, the existing behaviour is not
changed.
Approved by: re (kensmith)
MFC after: 1 day
(or once people stop arguing about colours of paint)
in sysctl_jail_list(). Because of this, jls(8) could enter into
an endless loop. The strange thing is, that we can call jls(8) while
the other one is in loop and it will succeed - SYSCTL_OUT() will
not return ENOMEM there.
Maybe SYSCTL_OUT() returns first ENOMEM, because there is no memory,
but is marking some memory range as wired even on failure and another
SYSCTL_OUT() calls are not going to succeed, because process exceeds
limit of wired memory? ENOVMCLUE.
Anyway. Fix jls(8) to ignore ENOMEM and retry only 4 times.
Submitted by: Niklas Saers
PR: kern/79245
MFC after: 3 days
missing from ${WORKDIR}/files/.
This bug was caused by the astonishing interaction of "return" and
pipelines; in the following code, the "return" does not exit the
function, but instead exits the subshell which was spawned for the last
element of the pipeline; consequently, the output produced is "foo".
foo() {
echo bar | while read baz; do
if [ ${baz} = "bar" ]; then
return 1
fi
done
echo foo
}
Reported by: simon
"portsnap fetch update" or "portsnap -I cron update". They will be
executed in the order that they appear, and duplicates are not removed
(so "portsnap fetch fetch fetch fetch" is meaningful, albeit rather
silly).
Requested by: Roman Divacky
change the permissions. Failures are still recorded.
This allows mtree to do a generally better job of things when uid != 0.
Sponsored by: ActiveState/Sophos
Partially submitted by: neilw at ActiveState dot com
Reviewed by: neilw at ActiveState dot com
MFC after: 3 weeks
from the port number (if any exists). This unbreaks
env HTTP_PROXY="http://localhost:3128/" portsnap fetch
While I'm here, list both the host and the port in the error message
output if getaddrinfo() fails, since either of them could be responsible
for the failure.
than what we already have" message. [1]
When operating with the undocumented --debug option, replace "xargs
phttpget" with "xargs -t phttpget", since that might conceivably help
debugging.
Noticed by: simon [1]
fast, lightweight, and generally good way for users to keep their
ports trees up to date.
This is version 0.9.4 from the ports tree (sysutils/portsnap) with
the following changes:
1. The experimental pipelined http code is enabled. No seatbelts
in -CURRENT. (^_^)
2. The working directory has moved from /usr/local/portsnap to
/var/db/portsnap (as discussed on -arch two days ago).
3. Portsnap now fetches a list of mirrors (distributed as DNS SRV
records) and selects one randomly. This should help to avoid the
uneven loading which plagues the cvsup mirror network.
4. The license is now 2-clause BSD instead of 3-clause BSD.
5. Various incidental changes to make portsnap fit into the base
system's build mechanics.
X-MFC-After: 6.0-RELEASE
X-MFC-Before: 5.5-RELEASE
X-MFC-To: RELENG_6, RELENG_5, ports
discussed on: -arch and several other places
"yes please" from: simon, remko, flz, Diane Bruce
thinks this is a great idea: bsdimp
Hopes he didn't forget any files: cperciva
it is running during installations. The vsystem() function does get
used after this happens (e.g. if you manually configure the network
interface and ask it to enable the interface) so it needs to be a
little smarter about whether it uses /stand/sh or /bin/sh.
MFC after: 3 days
a card is ejected). wpa_supplicant requires that internal events
for interfaces coming+going include a name but after an interface
is removed you cannot use if_indextoname to map the interface index
in the RTM_IFINFO (or RTM_IFANNOUNCE) msg to an interface name.
Instead record the interface index in the driver-private data area
and use that to filter msgs from the routing socket. This insures
that when we have a message to process we know the interface name.
The end result is that we can now dispatch an "interface removed"
event that is understood when notified than an interface went away
(where previously the event dispatched was ignored because the
interface name was unrecognized).
This change also insures we only process events for our interface.
The only downside is that we can no longer wait for an interface
to arrive as we need to map the interface name to an index at
startup. This is not important as wpa_supplicant should be launched
by devd and not include a separate mechanism for doing interface
discovery.
MFC after: 3 days
Rate units are mA/mW, not mAh/mWh. Get full battery status and time
remaining from ACPIIO_BATT_GET_BATTINFO instead of BST.
PR: bin/83672
MFC after: 2 days
-o Show the origin recorded on package generation instead of the
package name.
-O Only list packages whose registered origin is origin.
Based on PR: bin/78640
Submitted by: Marcus Grando <marcus at corp dot grupos.com.br>, flz
on -current by Ben Kaduk <minimarmot@gmail.com>.
Add a hack of my own to allow the user to supply the paths to the INF and
SYS files on the command line.
- file(1) does not recognize UTF-16 encoded .INF file:
netbc564.inf: MPEG ADTS, layer I, v1, 96 kBits, 32 kHz, Stereo
Use egrep(1) to match two strings, i. e., `Signature' and `Class=Net'.
- Fix linking failure. Generate a temporary Makefile to emluate
official kernel module build process.
- Some minor typo/style fixes.
Reviewed by: obrien
section on "make world". The old link still works fine, but all the
hyperlinks of the referenced document are broken; the same links
work find if /doc/en_US.ISO8859-1 is used instead of plain /doc to
reach the online Handbook copy.
vertical virtual scrolling. This also respects -U for the distance.
PR: bin/82762
Submitted by: Eric Kjeldergaard <kjelderg -at- gmail.com>
MFC after: 1 month
o Slightly change KBADDKBD and KBRELKBD ioctl() interface. Instead of passing
keyboard index pass keyboard_info_t structure with populated 'kb_unit' and
'kb_name' fields. Keyboard index is not very user-friendly and is not very
easy to obtain. Keyboard driver name and unit, on the other hand, is much
more user friendly and known almost all the time;
o Move definition of keyboard_info_t structure up;
o Teach kbdcontrol(1) how to attach/detach keyboards to/from the keyboard
multiplexor;
o Update kbdcontrol(1) man page and document new functionality.
To attach/detach keyboard to/from keyboard multiplexor one needs to use
keyboard device name (i.e. ukbd0).
MFC after: 1 week
it about the lease file location and not invoking it with the (non-existant)
'-r' option. Releasing leases works vastly different now, so this isn't
needed.
Submitted by: sam
Approved by: re
o use proper api for setting/deleting keys instead of depending
on key indices
o check mac address to decide whether a key is unicast or group/global
o check set_tx on key set to decide whether a group/global key should
also be marked as default
o explicitly set IEEE80211_KEY_GROUP flag for group keys instead of
depending on kernel auto-add kludge
With the above changes static wep key handling works.
Reviewed by: avatar
Approved by: re (scottl)
of USB2 "duplicate" psuedo busses, it is not at all uncommon for machines
to have more than 4 USB busses nowadays.
PR: bin/81533
Submitted by: Darren Pilgrim dmp at bitfreak dot org
Approved by: re (scottl)
MFC after: 1 week
how to convert these to gprof(1) flat profiles. Augment description
for the '-g' option.
Remove superfluous quotes around a macro argument, bump document date [1].
Reminded by: ru [1]
Approved by: re (blanket hwpmc)
- pmcstat(8) gprof output mode fixes:
lib/libpmc/pmclog.{c,h}, sys/sys/pmclog.h:
+ Add a 'is_usermode' field to the PMCLOG_PCSAMPLE event
+ Add an 'entryaddr' field to the PMCLOG_PROCEXEC event,
so that pmcstat(8) can determine where the runtime loader
/libexec/ld-elf.so.1 is getting loaded.
sys/kern/kern_exec.c:
+ Use a local struct to group the entry address of the image being
exec()'ed and the process credential changed flag to the exec
handling hook inside hwpmc(4).
usr.sbin/pmcstat/*:
+ Support "-k kernelpath", "-D sampledir".
+ Implement the ELF bits of 'gmon.out' profile generation in a new
file "pmcstat_log.c". Move all log related functions to this
file.
+ Move local definitions and prototypes to "pmcstat.h"
- Other bug fixes:
+ lib/libpmc/pmclog.c: correctly handle EOF in pmclog_read().
+ sys/dev/hwpmc_mod.c: unconditionally log a PROCEXIT event to all
attached PMCs when a process exits.
+ sys/sys/pmc.h: correct a function prototype.
+ Improve usage checks in pmcstat(8).
Approved by: re (blanket hwpmc)
- Remove mention of an unimplemented option.
- Clarify the behavior of pmcstat when logging PMCs are
requested, but no log output file is specified.
- Add a cross-reference to pmclog(3).
- Bump document date.
Reviewed by: ru
Submitted by: ru [1]
Approved by: re (blanket hwpmc)
avoid the confusing error message about the line being too long). This
change uses fgetln to detect the right conditions, but the fixed-width
line buffer is kept because too many other places in the program make
assumptions about its maximum width.
Approved by: re (scottl)
function as @comment has. But will be valid only for files and not
for md5 sums, rcsid's and comments in the future.
Submitted by: flz
Approved by: re@ (scottl)
method of executing commands remotely. There are no rexec clients in
the FreeBSD tree, and the client function rexec(3) is present only in
libcompat. It has been documented as "obsolete" since 4.3BSD, and its
use has been discouraged in the man page for over 10 years.
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
of NTP hosts, if ntpdate_hosts is unset or empty.
PR: conf/79712
Submitted by: Tsurutani Naoki <turutani@scphys.kyoto-u.ac.jp>
mdoc text by: Matteo Riondato <rionda@gufi.org>
o reorg driver to consolidate state setup in the associate method
o add set_auth_alg method
o cleanup interface state on deinit
o change associate to use revised MLME ioctl api so we can support
ap_scan=2 methodology
o cleanup associate to support WEP and no cipher cases
o s/__FUNCTION__/__func__/
from the locally installed package. When this modifier is specified
pkg_create(8) will also create package files for all packages on
which that locally installed package depends.
MFC after: 5 days
24, and 32 bit modes. To use that, syscons(4) must be built with
the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a.
vesa.ko) must be either loaded, or be compiled into the kernel.
Do not return EINVAL when the mouse state is changed to what it already is,
which seems to cause problems when you have two mice attached, and
applications are not likely obtain useful information through the EINVAL
caused by showing the mouse pointer twice.
Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is
the video mode number from the vidcontrol -i mode output. Also, revert the
video mode if something fails.
Obtained from: DragonFlyBSD
Discussed at: current@ with patch attached [1]
PR: kern/71142 [2]
Submitted by: Xuefeng DENG <dsnofe at msn com> [1],
Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
additional argument that allows us to specify a timeout, like we do for
the subsequent clnt_call() calls.
Submitted by: Jeremie Le Hen <jeremie@le-hen.org>
MFC after: 3 weeks
- Remove keyword 'continue' for more indepth error reporting
on each line
- WARNS 6 Clean
Submitted by: Liam J. Foy <liamfoy@dragonflybsd.org>
MFC after: 1 week
docs. Last I heard, Harlan Stenn was considering using FreeBSD's
pages as a starting point for the ISC NTP distribution's own pages.
If that happens, everyone wins and these can go away, to be replaced
by imported versions in contrib/ntp.
-I Use only the index file for determining if a package is out of
date. This is much faster than using the version number from a
port's Makefile, at the expense of potentially giving an incor-
rect result if the index file is out of date.
Without this option, the index file is only consulted if "make -V PKGNAME"
cannot be used.
Approved by: portmgr (krion)
catch all transient errors. This fixes situations where transient
error conditions such as network interfaces losing carrier signals
or the system running out of mbufs would result in the permanent
removal of forwarding syslog messages.
MFC after: 1 week
connections to Bluetooth HID device. As soon as Bluetooth HID device
is powered off (or goes out of RF range) the stack will terminate both
connections. File descriptors for both connections will become active
on next select(2) call. Because bthidd(8) processes file descriptors
in order, it will detect descriptor for one of the closed connections
first and kill the session. However, there is still a second (active)
descriptor that used to point to the same session. bthidd(8) used to
assert() if it cant find session by file descriptor, which was wrong.
While I'm here fix a couple of typos in parser.y
Reported by: Eric Anderson anderson AT centtech DOT com
MFC after: 3 days
the same time.
Fix if_ndis_pccard.c so that it sets sc->ndis_dobj and sc->ndis_regvals.
Correct IMPORT_SFUNC() macros for the READ_PORT_BUFFER_xxx() routines,
which take 3 arguments, not 2.
This fixes it so that the Windows driver for my Cisco Aironet 340 PCMCIA
card works again. (Yes, I know the an(4) driver supports this card natively,
but it's the only PCMCIA device I have with a Windows XP driver.)
Have pmcstat(8) and pmccontrol(8) use these APIs.
Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).
Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.
Bug fixes:
- (x86 class processors) Fix a bug that prevented an RDPMC
instruction from being recognized as permitted till after the
attached process had context switched out and back in again after
a pmc_start() call.
Tighten the rules for using RDPMC class instructions: a GETMSR
OP is now allowed only after an OP ATTACH has been done by the
PMC's owner to itself. OP GETMSR is not allowed for PMCs that
track descendants, for PMCs attached to processes other than
their owner processes.
- (P4/HTT processors only) Fix a bug that caused the MI and MD
layers to get out of sync. Add a new MD operation 'get_config()'
as part of this fix.
- Allow multiple system-mode PMCs at the same row-index but on
different CPUs to be allocated.
- Reject allocation of an administratively disabled PMC.
Misc. code cleanups and refactoring. Improve a few comments.
the NTP server list.
The servers are by Internet Multifeed Co., and connected to their
IX service JPNAP. It would be a good NTP server for machines in Japan.
See also http://www.jst.mfeed.ad.jp/ for more details (Japanese only).
Reviewed by: nork
When adding users from a preformatted file, do not exit
silently when empty lines or lines starting with a '#'
are encountered - ignore them instead.
- Fix a spelling error in a comment.
PR: bin/80058
here on in, if_ndis.ko will be pre-built as a module, and can be built
into a static kernel (though it's not part of GENERIC). Drivers are
created using the new ndisgen(8) script, which uses ndiscvt(8) under
the covers, along with a few other tools. The result is a driver module
that can be kldloaded into the kernel.
A driver with foo.inf and foo.sys files will be converted into
foo_sys.ko (and foo_sys.o, for those who want/need to make static
kernels). This module contains all of the necessary info from the
.INF file and the driver binary image, converted into an ELF module.
You can kldload this module (or add it to /boot/loader.conf) to have
it loaded automatically. Any required firmware files can be bundled
into the module as well (or converted/loaded separately).
Also, add a workaround for a problem in NdisMSleep(). During system
bootstrap (cold == 1), msleep() always returns 0 without actually
sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for
the NIC's firmware to come to life, and fails to load if NdisMSleep()
doesn't actually delay. As a workaround, if msleep() (and hence
ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead).
This is not really the right thing to do, but we can't really do much
else. At the very least, this makes the Intel driver happy.
There are probably other drivers that fail in this way during bootstrap.
Unfortunately, the only workaround for those is to avoid pre-loading
them and kldload them once the system is running instead.
attempt to clear its pending jobs list, as this could trigger another
signal, and cause an infinite recursion. What yppush_exit() tests
in order to determine whether to flush pending jobs is the
yppush_joblist chained list, so this is what needs to be cleared
in that case (not the yppush_jobs counter).
Reviewed by: audit@ (no objection)
MFC after: 2 weeks
allows us to specify the machine_arch as well as machine. If
specified then a second link will be made, similar to machine, from
$MACHINE_ARCH to $S/$MACHINE_ARCH/include.
This is for ports where MACHINE != MACHINE_ARCH (pc98 today, others in
the future?).
Reviewed by: arch@, nyan@
sha512, I did not do that since it is not entirely clear where "the one
true place" to hold their implementations is going to be. Sha256 is
different since mtree already links against libmd.
Make recommended procedure for integrity checking in the manpage
consistent.
Fix a bug with -f spec1 -f spec2 comparison, which prevented
test/tes03.sh from running successfully.
Reviewed by: phk, cperciva
fields that got added to it recently-ish. While here document
what each of the fields is based on discussion with portmgr@.
Patch from: murray (slightly adapted)
MFC after: 1 day
format, with humanize_number(3).
- Move the common parts of the code that prints the sizes for a single
swap device and the total to a single function to avoid repeating
the humanize_number() stuff all over the place.
- Change the type of CONVERT() from intmax_t to int64_t, since this
makes calling humanize_number() easier but cast the values to
intmax_t before printing them, to make use of the %jd format that
printf() supports.
- Document the new -h flag in the manpage and bump its date.
Approved by: pjd
Useful tips: brooks
MFC after: 2 weeks
Currently implemented are most things related to states and interfaces, todo
are address tables and altq. I've tried to keep this roughly in sync with a
project implementing this for net-snmpd.
Reviewed by: harti, dhartmei
MFC after: 1 month
This allows us to:
- perform scatter gather operations without using temporary files,
- create non-linear pipelines, and
- implement file views using symbolic links.
File view idea by: Vassilios Karakoidas
Portalfs pointer by: John Ioannidis
MFC after: 1 month
cojunction with -C and is used by /etc/rc.d/newsyslog.
I forgot that this was in my perforce tree and not my running system and
thus committed a non-working newsyslog script.
Reported by: des
Pointy hat: brooks
with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
While version 4 entries are architecture-independent, we
also store old (version 3) entries in native byte order.
Also, the hash itself is created in a native byte order.
With this change, pwd_mkdb(8) can be used to cross-build
*pwd.db files for another architecture.
Tested on: i386, amd64, alpha, sparc64
with moderate IO going on, system usage can hover around 65-77% even
though it would benefit from higher performance. Typically, only truly
idle systems pass the 90% mark so only demote then.
Also, add conditional code to allow different invokations for objcopy
depending on whether we're compiled on an i386 arch or amd64 arch, so
that we can produce x86-64 object files on amd64.
Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx)
deserves a big thanks for submitting initial patches to make it
work. I have mangled his contributions appropriately.
The main gotcha with Windows/x86-64 is that Microsoft uses a different
calling convention than everyone else. The standard ABI requires using
6 registers for argument passing, with other arguments on the stack.
Microsoft uses only 4 registers, and requires the caller to leave room
on the stack for the register arguments incase the callee needs to
spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall
and _fastcall, all routines on Windows/x86-64 uses the same convention.
This unfortunately means that all the functions we export to the
driver require an intermediate translation wrapper. Similarly, we have
to wrap all calls back into the driver binary itself.
The original patches provided macros to wrap every single routine at
compile time, providing a secondary jump table with a customized
wrapper for each exported routine. I decided to use a different approach:
the call wrapper for each function is created from a template at
runtime, and the routine to jump to is patched into the wrapper as
it is created. The subr_pe module has been modified to patch in the
wrapped function instead of the original. (On x86, the wrapping
routine is a no-op.)
There are some minor API differences that had to be accounted for:
- KeAcquireSpinLock() is a real function on amd64, not a macro wrapper
around KfAcquireSpinLock()
- NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole
NDIS_BUFFER API a bit to accomodate this.
Bugs fixed along the way:
- IoAllocateMdl() always returned NULL
- kern_windrv.c:windrv_unload() wasn't releasing private driver object
extensions correctly (found thanks to memguard)
This has only been tested with the driver for the Broadcom 802.11g
chipset, which was the only Windows/x86-64 driver I could find.
properly initialized, that happens when lpc is called from a tty.
Without this change, it's possible to get SIGSEGV simply doing:
echo "..:" | lpc
Reported by: Wojciech A. Koszek <dunstan at freebsd czest pl>
PR: 77462 (patch rewritten by myself)
MFC After: 1 week
entry having stepping value of zero can cause crontab to hang there,
and if the main crontab is being changed in this way, then cron(8)
will keep spining.
Obtained from: OpenBSD [src/usr.sbin/cron/entry.c,v 1.17]
PR: 68683 (my own, but forgot to commit it...)
MFC After: 1 week
o Use SYSCTL_IN() macro instead of direct call of copyin(9).
Submitted by: ume
o Move sysctl_drop() implementation to sys/netinet/tcp_subr.c where
most of tcp sysctls live.
o There are net.inet[6].tcp[6].getcred sysctls already, no needs in
a separate struct tcp_ident_mapping.
Suggested by: ume
nodes from (N + 1) to 1, where N is the number of
nodes in the system.
- Implement "ls -l" which runs the "show" command for
each node.
In collaboration with: glebius
behaviour of chflags within a jail. If set to 0 (the default), then a
jailed root user is treated as an unprivileged user; if set to 1, then
a jailed root user is treated the same as an unjailed root user.
This is necessary to allow "make installworld" to work inside a jail,
since it attempts to manipulate the system immutable flag on certain
files.
Discussed with: csjp, rwatson
MFC after: 2 weeks
Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can
simulate driver stacking.
In Windows, each loaded driver image is attached to a DRIVER_OBJECT
structure. Windows uses the registry to match up a given vendor/device
ID combination with a corresponding DRIVER_OBJECT. When a driver image
is first loaded, its DriverEntry() routine is invoked, which sets up
the AddDevice() function pointer in the DRIVER_OBJECT and creates
a dispatch table (based on IRP major codes). When a Windows bus driver
detects a new device, it creates a Physical Device Object (PDO) for
it. This is a DEVICE_OBJECT structure, with semantics analagous to
that of a device_t in FreeBSD. The Windows PNP manager will invoke
the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT
and the PDO.
The AddDevice() function then creates a new DRIVER_OBJECT structure of
its own. This is known as the Functional Device Object (FDO) and
corresponds roughly to a private softc instance. The driver uses
IoAttachDeviceToDeviceStack() to add this device object to the
driver stack for this PDO. Subsequent drivers (called filter drivers
in Windows-speak) can be loaded which add themselves to the stack.
When someone issues an IRP to a device, it travel along the stack
passing through several possible filter drivers until it reaches
the functional driver (which actually knows how to talk to the hardware)
at which point it will be completed. This is how Windows achieves
driver layering.
Project Evil now simulates most of this. if_ndis now has a modevent
handler which will use MOD_LOAD and MOD_UNLOAD events to drive the
creation and destruction of DRIVER_OBJECTs. (The load event also
does the relocation/dynalinking of the image.) We don't have a registry,
so the DRIVER_OBJECTS are stored in a linked list for now. Eventually,
the list entry will contain the vendor/device ID list extracted from
the .INF file. When ndis_probe() is called and detectes a supported
device, it will create a PDO for the device instance and attach it
to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call
our NdisAddDevice() handler to create the FDO. The NDIS miniport block
is now a device extension hung off the FDO, just as it is in Windows.
The miniport characteristics table is now an extension hung off the
DRIVER_OBJECT as well (the characteristics are the same for all devices
handled by a given driver, so they don't need to be per-instance.)
We also do an IoAttachDeviceToDeviceStack() to put the FDO on the
stack for the PDO. There are a couple of fake bus drivers created
for the PCI and pccard buses. Eventually, there will be one for USB,
which will actually accept USB IRP.s
Things should still work just as before, only now we do things in
the proper order and maintain the correct framework to support passing
IRPs between drivers.
Various changes:
- corrected the comments about IRQL handling in subr_hal.c to more
accurately reflect reality
- update ndiscvt to make the drv_data symbol in ndis_driver_data.h a
global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it.
- Obtain the softc pointer from the miniport block by referencing
the PDO rather than a private pointer of our own (nmb_ifp is no
longer used)
- implement IoAttachDeviceToDeviceStack(), IoDetachDevice(),
IoGetAttachedDevice(), IoAllocateDriverObjectExtension(),
IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(),
IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(),
IoInitializeIrp()
- fix a few mistakes in the driver_object and device_object definitions
- add a new module, kern_windrv.c, to handle the driver registration
and relocation/dynalinkign duties (which don't really belong in
kern_ndis.c).
- made ndis_block and ndis_chars in the ndis_softc stucture pointers
and modified all references to it
- fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they
work correctly with the new driver_object mechanism
- changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver()
(which is now deprecated)
- used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines
instead of kludged up alloc/free routines
- added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
utility:
The tcpdrop command drops the TCP connection specified by the
local address laddr, port lport and the foreign address faddr,
port fport.
Obtained from: OpenBSD
Reviewed by: rwatson (locking), ru (man page), -current
MFC after: 1 month
xt_rtaddr member of SVCXPRT structure. This allows to use IPv6
address stored in "struct sockaddr_storage" in "struct netbuf".
- Output the reason of getnameinfo() error.
Reviewed by: alfred
- Constify structure members that should not be changed
during process.
- Apply static where needed
- signed/unsigned madness
- Bump WARNS?= levels from 2 to 6
(this is a diff reduction for a subsequent commit against these
Makefile's)
any pending RADIUS transaction. Use this before sending RAD_STOP RADIUS
messages so that we definitely ``stop'' the session.
It was discovered that sometimes when the link timed out, we got lucky
enough to have an un-ACK'd RADIUS accounting transaction in progress,
resulting in the RAD_STOP message failing to send.
Original report found on: A russion news group
Text translated by: glebius
Tested by: Alexey Popov llp at iteranet dot com
MFC after: 7 days
measurements suggest that higher degrees of parallelism for large
numbers of clients help performance substantially.
Submitted by: Eric Anderson <anderson at centtech dot com>
- Use foo(void) instead of foo().
- Use static where applicable.
- Apply more const's when passing parameters
- signed/unsigned madness
- Avoid namespace collision by adding underscores.
- For 64-bit architectures, use %zx instead of %x
when necessary.
- When storing constants, use const instead of
variable.
- Bump WARNS?= from 2 to 6
That should fix the problem with invalid PSM returned from bthidcontrol.
Pointy hat goes to me.
PR: misc/76107
Submitted by: Hiroyuki Aizu < aizu at navi dot org >
MFC after: 1 day
fdcontrol/fdcontrol.c:
- Add const constraint to an intermediate value
which is not supposed to be changed elsewhere.
fdread/fdread.c:
- Use _devname in favor of devname to avoid name
conflicit.
- -1 is less than any positive number so in order
to get the block to function, we should get the
block a little earlier.
- Cast to remove signed when we are sure that a
return value is positive, or is compared with
an positive number (tracknumber of a floppy
disk is not likely to have UINT_MAX/2 anyway)
fdread/fdutil.c:
- Use more specific initializer
fdwrite/fdwrite.c:
- Use static on format_track since it's not
referenced in other places.
- Use const char* to represent string constant.
Bump WARNS accordingly.
This example caused me to incorrectly believe that you must use the
generic device nodes when you can in fact use either. It's often better
to use the driver specific node.
device is involved, (e.g. plugin a hub with multiple devices
already attached to it)
Submitted by: Naoyuki Tai <ntai@smartfruit.com>
PR: 43993
MFC in: 1 week
so remove argc and argv from main() argument.
At the same time, user and tt is not likely to be changed during
execution so mark them const.
This commit should guarantee nologin to pass WARNS=6.
Tested on: i386
MFC After: 1 month
parameter 2 in chmod(2), which is a mode_t (and in turn a __uint_16_t),
it's more likely that it should be defined as an unsigned variable.
This commit should make newsyslog WARNS=6 clean, but don't bump the knob
until I have a universe build.
MFC After: 1 month
for calculating the job number for a job based on the control-file name.
We might receive cf-files named by other implementations of lpr, where
the job number shown by lpq would not match the job number that other
commands expected for the same name.
This also uses a newer algorithm for determining a job number, to avoid
problems caused when a control-file is named using an IP address, instead
of the hostname.
This also moved the declaration if isowner() from lp.h to rmjob.c. When I
went to change the parameters, I noticed that rmjob.c was the only source
file which uses it.
MFC after: 2 weeks
control-file for each print job. This is partially because the previous
checks still let through some characters which would cause trouble for
other applications which try to process the resulting userid -- such as
accounting programs.
But the main reason is to handle the case where some remote host sends a
print job where the given userid is an uppercase-version of the real userid.
For that case, lpd will now check for uppercase letters in the userid. If
there are any, it will check to see if the given userid (with the uppercase
letters) is a valid one. If it is *not* valid, then lpd will change the
userid to all-lowercase right when the job is received.
MFC after: 2 weeks
than a colon, so don't allow whitespace in program names. To be
consistent with hostnames, don't allow whitespace in the program
name specifiers in syslog.conf either.
(The first change is by Markus from the PR, the second is mine.)
PR: 68691
Submitted by: Markus Oestreicher <m.oe@x-trader.de>
MFC after: 3 weeks
disk. This is main reason why sysinstall presents SCSI CDROM to
available disks in Fdisk/Label menu. In addition, adding a blank
SCSI CDROM to the menu generates floating point exception in sparc64.
Disk_Names() just extracts sysctl "kern.disks". Why GEOM treats SCSI
CDROM as a disk is beyond me and that should be investigated.
For temporary workaround, ignore SCSI CDROM device.
PR: sparc64/72962
Tested by: R. Tyler Ballance < tyler AT tamu DOT edu>
MFC after: 1 week
the file will be created with the right access, if the call to open()
does create it. Also fix the other call to umask() to turn off
"write others", just as a matter of general safety.
PR: 74418
MFC after: 4 days
sure the data file has been completely transfered before starting to
print it. This is needed because some implementations of lpr will send
the control-file for a print job before sending the matching data-files,
and that can cause problems if the receiving host is a busy print-server.
MFC after: 2 weeks
This allows LCP ECHOs to be enabled independently of LQR reports.
Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.
PR: 74821
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over the 32 bit limit, so reoganise
things to allow a bunch more options.
Go to version 3.4.1 so that any compatability problems can be identified.
units (as specified in _BIF). (noted by Bruno Ducrot)
o In looking in the standard, if the cap numbers are 0xffffffff, then acpi
is reporting unknown for that field. Report unknown numbers properly.
o Update the state to reflect charging, discharging and critical.
my patches for this information. Commit my more complete version.
This version isn't complete yet, since some details aren't handled
right just yet.
Poaching by: phk
hence bump it to 6.
Note that the last commit message was not quite accurate. While the
assumption exists in the code, it's not possible to have an
uninitialized p there because if lflag is set when username is NULL
then execution would be terminated earlier.
- Allow the upload directory to be optional. If the upload directory
field is cleared to the empty string then no directory will be created.
- Don't create a bin/ subdirectory in ftp's home dir containing ls(1) and
date(1) as ftpd(8) no longer requires it.
- Create a pwd.db file in etc/ instead of a passwd file.
- Ignore NIS compat entries in /etc/group and /etc/master.passwd when
building the anonymous files.
PR: bin/60662
Submitted by: Olafur Osvaldsson oli at isnic dot is
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
http://www.securityfocus.com/archive/1/379450
This patch is based on dillon's patch on DragonFlyBSD, which is in
turn derived from OpenBSD's src/usr.sbin/pppd/cbcp.c,v 1.6.
Obtained from: OpenBSD via DragonFlyBSD
Encouraged by: nectar
This commit does not affect the code generated, as proven by md5'ing
resulting binaries.
Bump WARNS accordingly.
Compiled on: sparc64, ia64, i386
Reviewed by: alfred (but blame me if anything goes wrong :-)
syslog(3) if we are a priveleged program (sshd, su, etc.).
- Make syslogd open an additional socket /var/run/logpriv, with 0600
permissions.
- In libc, try to use this socket.
- Do not loop forever if we are using this socket (partial backout of 1.31)
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
MFC after: 1 month
remove limit for 20 sockets.
- Add possibility to specify file mode for sockets created with '-l'.
- Check that socket name in '-l' is absolute.
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
the implementation of the following feature in revision 1.4:
- Install Makefile.yp as /var/yp/Makefile.dist and link it to
/var/yp/Makefile only if /var/yp/Makefile doesn't already exist.
Suggested by Peter Wemm.
The actual code was only symlinking when no /var/yp/Makefile.dist
existed, i.e., never.
Since we can only override the DSDT, a custom ASL dumped previously that
contained SSDTs would result in lots of multiple definition errors.
A longer-term fix involves adding the ability to override SSDTs to ACPI-CA.
MFC after: 3 days
Disable some code which magics minor numbers into card/port numbers.
I think we will have to parse this from the device name in the future,
but I need to confer with peter@ about this.
Put sicontrol back in the build.
Troublespotter: dwhite
NO_BIND_DNSSEC, NO_BIND_ETC, NO_BIND_NAMED, and NO_BIND_UTILS.
2. Make creation of directories in /usr/include that are only needed
in the WITH_BIND_LIBS case conditional.
Reviewed by: ru, des
with this configuration, but Ruslan tells me that I was probably mistaken,
and on retest the .5 pages are being installed just fine.
Therefore reverse the MAN[58] change in favor of the more modern syntax.
Submitted by: ru
1. Install man files and links for the lwres library.
2. Fix the path in various files to say /etc/namedb/ instead of just /etc.
3. Correctly install the conf file man pages for named and rndc.
but have a knob (WANT_BIND_LIBS) to build and install them in /usr/lib
and /usr/include. Rumors are that this may be useful at a later point,
let's see.
What this really means is that all BIND libraries are now internal to
buildworld (by default, unless WANT_BIND_LIBS is defined), and linked
statically into various BIND executables.
While here, removed redundant -I's from CFLAGS in lib/bind makefiles.
Sponsored by: des
OK'ed by: dougb
loop to avoid an incorrect display of the nologin path twice.
PR: 71786
Submitted by: Andrew Hayden <andrew.hayden@gmail.com>
Reviewed by: mtm
MFC after: 3 days
POSIX threads libraries are not available. Add crypto support if
the crypto libraries are available. Build dnssec-{keygen,signzone}
if crypto is available.
Submitted by: (in part) dougb@
This adds a safebelt that prevents users to mark more than
one "active" partitions, which will lead to a unbootable
machine, especially in multi-boot configurations.
PR: bin/71404
MFC After: 3 days
Approved by: murray (mentor)
$ crontab -e
[Add an entry with an error in the crontab file.]
crontab: errors in crontab file, can't install
Do you want to retry the same edit? yes
[Exit the editor without any changes.]
crontab: no changes made to crontab
[Entry is lost.]
Now crontab will loop until the error is fixed, or the
user answers no.
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.
Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
remaining consumers to have the count passed as an option. This is
i4b, pc98/wdc, and coda.
Bump configvers.h from 500013 to 600000.
Remove heuristics that tried to parse "device ed5" as 5 units of the ed
device. This broke things like the snd_emu10k1 device, which required
quotes to make it parse right. The no-longer-needed quotes have been
removed from NOTES, GENERIC etc. eg, I've removed the quotes from:
device snd_maestro
device "snd_maestro3"
device snd_mss
I believe everything will still compile and work after this.
concensus seems to be that is best left for doing post-install.
Discussed on: freebsd-current@
Tested with: make release
Approved by: re@
MFC after: 3 days
Previously, it would recognize it as a valid shell only
if the basename (nologin) was specified. Now, it will
recognize both the basename and the full path.
NOTE: The full path as adduser(8) understands it is /usr/sbin/nologin.
There is a symlink, /sbin/nologin, but that's deprecated and
only there for backwards compatibility.
relocation is not sufficient for ELF relocatable object format
modules, since accessing the module metadata involves following
pointers between different ELF sections.
This allows kldxref to correctly build linker.hints on the amd64
platform.
to get used to the fact that Perl is no longer part of the base system.
It is practically impossible to install any useful package and not get
Perl automatically pulled in as a dependency. So the typical user will
get their Perl.
This change greatly reduces the amount of manual labor in building the
miniinst.iso in release building.
Centralize the fdctl_wr() function by adding the offset in
the resource to the softc structure.
Bugfix: Read the drive-change signal from the correct place:
same place as the ctl register.
Remove the cdevsw{} related code and implement a GEOM class.
Ditch the state-engine and park a thread on each controller
to service the queue.
Make the interrupt FAST & MPSAFE since it is just a simple
wakeup(9) call.
Rely on a per controller mutex to protect the bioqueues.
Grab GEOMs topology lock when we have to and Giant when
ISADMA needs it. Since all access to the hardware is
isolated in the per controller thread, the rest of the
driver is lock & Giant free.
Create a per-drive queue where requests are parked while
the motor spins up. When the motor is running the requests
are purged to the per controller queue. This allows
requests to other drives to be serviced during spin-up.
Only setup the motor-off timeout when we finish the last
request on the queue and cancel it when a new request
arrives. This fixes the bug in the old code where the motor
turned off while we were still retrying a request.
Make the "drive-change" work reliably. Probe the drive on
first opens. Probe with a recal and a seek to cyl=1 to
reset the drive change line and check again to see if we
have a media.
When we see the media disappear we destroy the geom provider,
create a new one, and flag that autodetection should happen
next time we see a media (unless a specific format is configured).
Add sysctl tunables for a lot of drive related parameters.
If you spend a lot of time waiting for floppies you can
grab the i82078 pdf from Intels web-page and try tuning
these.
Add sysctl debug.fdc.debugflags which will enable various
kinds of debugging printfs.
Add central definitions of our well known floppy formats.
Simplify datastructures for autoselection of format and
call the code at the right times.
Bugfix: Remove at least one piece of code which would have
made 2.88M floppies not work.
Use implied seeks on enhanced controllers.
Use multisector transfers on all controllers. Increase
ISADMA bounce buffers accordingly.
Fall back to single sector when retrying. Reset retry count
on every successful transaction.
Sort functions in a more sensible order and generally tidy
up a fair bit here and there.
Assorted related fixes and adjustments in userland utilities.
WORKAROUNDS:
Do allow r/w opens of r/o media but refuse actual write
operations. This is necessary until the p4::phk_bufwork
branch gets integrated (This problem relates to remounting
not reopening devices, see sys/*/*/${fs}_vfsops.c for details).
Keep PC98's private copy of the old floppy driver compiling
and presumably working (see below).
TODO (planned)
Move probing of drives until after interrupts/timeouts work
(like for ATA/SCSI drives).
TODO (unplanned)
This driver should be made to work on PC98 as well.
Test on YE-DATA PCMCIA floppy drive.
Fix 2.88M media.
This is a MT5 candidate (depends on the bioq_takefirst() addition).
This gets us the info we need on systems which have proprietary tables that
don't match the standard. For instance, an AMI system has a table of type
"OEMB" with an invalid checksum.
Tested by: Maxim Maximov <mcsi_at_mcsi.pp.ru>
MFC after: 1 day
callers. These ioctls attempted to enable and disable the ACPI
interpreter at runtime. In practice, it is not possible to boot with
ACPI and then disable it on many systems and trying to do so can cause
crashes, interrupt storms, etc. Binary compatibility with userland is
retained.
MFC after: 2 days
and explicitly mention SSDT when we talk about the DSDT so that people
don't have to guess whether it includes the SSDT.
While here, touch date.
Pointed out by: le@
Decrease log severity to debug if a protocol is not supported by the
kernel (rpcbind checks /etc/netconfig if a protocol is available).
This avoids "rpcbind: cannot create socket for tcp6" messages
at startup on IPv4-only kernels.
use it, only those with FCode. Add references to dc(4), gem(4) and hme(4)
for obtaining further information about such devices presently supported
by FreeBSD.
- Correct the HISTORY section. There was an eeprom(8) utility in 4.4BSD and
early versions of FreeBSD 2.x.
- Add an AUTHORS section.
now include the contents if any SSDT table as well. This makes use
of the property that one can concatenate the body of SSDT tables to
the DSDT, updating the DSDT header (length and checksum) and end up
with a larger and valid DSDT table. Hence, this also works with -f.
Reviewed by: njl@
contents of /usr/src/rescue. Until now, the files were shipped with
releases but sysinstall would ignore them (resulting in a non-buildable
source tree).
Sanity checked by: jhb
Specifically, change the second level menu title from 'Country' to
'Country or Region', since e.g. Hong Kong is not a country.
Submitted by: Xin LI <delphij@frontfree.net>
another process already has /dev/snp0 open, the snp(4) will return
EBUSY, in which case watch will try to open /dev/snp1..9. Currently
watch does not check errno to see if the failure was a result of EBUSY.
This results in watch making futile attempts to open snp0..snp9 even
though devices may not exist or the caller does not have permissions
to access the device.
In addition to this, it attempts to setup the screen for snooping even
though it may not ever get an snp device.
So this patch does two things
1) Checks errno for EBUSY, if open(2) fails for another reason
print that reason and exit.
2) setup the terminal for snooping after the snp descriptor has
been obtained.
Approved by: bmilekic (mentor)
install of Postfix fails since Postfix 1 is picked from INDEX instead
of Postfix 2.
The problem is that the package_add function matches multiple Postfix
packages and then installs a "random" version (the last one found in
INDEX). This does not occur with a CD-ROM install since there is only
one Postfix package on the CD-ROM.
The correct solution to this would be to check the origin field from
INDEX instead of the package name, but due to the way sysinstall is
made that is not trivial, so instead work around the problem by
hard-coding the Postfix major and minor revision (for the current
stable version) to install directly into the package_add call.
PR: misc/65426
Reported by: Harold Kachelmyer <bugs@princessharold.net>
Approved by: trhodes
or 'env MAKEOBJDIRPREFIX=... make' depending on the setting of
MAKEOBJDIRPREFIX in the environment. In any case this line kills the
original value of ${MAKE}. When during buildworld a new make is built (as
is the case during the upgrade) this causes a wrong make to be picked up
(the first one in the path). Use the same technique as Makefile.inc1:
create a MAKEENV variable and a CRUNCHMAKE that calls ${MAKE} with that
MAKEENV prefixed. Use CRUNCHMAKE instead of MAKE throughout the generated
makefile. This leaves the original ${MAKE} undisturbed.
some confusion as to how large the EFI system partition should be,
but 100MB seems to be either the maximum, the minimum or the default
size, so make the EFI partition 100MB.
global variables. On ia64, save a pointer to the efi chunk as well.
o At the same time, change checkLabels() to define these globals instead
of having the caller of checkLabels() pass addresses to variables for
these. Change the two callers correspondingly.
o Spent a bit more time adjusting try_auto_label() to prepate for having
the EFI partition created on ia64.
o Remove efi_mountpoint(). The EFI chunk is now available without having
to iterate over the disks and chunks to find it every time we need it.
o On ia64, now that the root chunk is globally available, set the
vfs.root.mountfrom tunable in loader.conf. This avoids that one cannot
boot into FreeBSD after an install. The kernel cannot find the root
device without a little help...
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
o Remove the code that creates the boot directory on the EFI file
system after it has been mounted, as well as remove the code
that creates the symlink from /boot -> /efi/boot (*). As a result,
/boot will be extracted onto the root file system.
o Add a function efi_mountpoint() that returns the mount point of
the EFI file system or NULL if no EFI partition is created. This
function is used to both check whether there's an EFI file system
and to return what its mount point is.
o When there's no EFI file system, ask the user if this is what he
or she wants. Since we extract /boot onto the root file system,
we do not actually need an EFI file system for the installation to
work. Whether one wants to install without an EFI partition is
of course an entirely different question. We allow it...
o When we're done installing and need to fix up the various bits
and pieces, check if there's an EFI partition and if yes, move
/boot to /efi/boot and create a symlink /boot -> /efi/boot (*).
This is a much more reliable way to get /boot onto the EFI
partition than creating the symlink up front and hope its being
respected. It so happened that we never had the boot directory
end up on the EFI partition. We make the symlink relative.
(*) /efi is a place holder for the actual EFI mount point of course.
instead of BD_ADDRs
- Convert BD_ADDRs in l2ping(8) output into the human readable names via
bt_gethostbyaddr(3)
- Introduce and document '-n' - numberic output option
Suggested by: Anil Madhavapeddy <anil at recoil dot org>
we'll actually create an EFI partition with a FAT file system instead
of an UFS file system. It also allows us to give a sensible default
mount point for EFI partitions so that people don't have to guess.
This also means that we can now remove new_efi_part(), which did the
same thing as new_part(), except it created a FAT file system. The
function wasn't called when the EFI partition was created from scratch
though, which was the problem. By passing the partition type to the
various functions, we can deal with EFI without having to duplicate
code.
While I'm here, document the existence of the '-l' option, which allows
one to use moused to use psm in some more interesting ways.
Approved by: njl (mentor)
that actually need it. This makes it easier for a platform porter to
find the files that may need tweaking to support whatever MD specific
partitioning is needed. It also helps to prevent that the libdisk API
gets exposed and/or used where it's not needed.
some debug support turned on. It turns out the sections in this driver
binary had relative virtual addresses (RVAs) that were different
from the raw addresses, and it had a .data section where the virtual size
was much larger than the raw size. (Most production binaries produced
with the Microsoft DDK have RVA == PA.)
There's code in the ndiscvt(8) utility that's supposed to handle
the vsize != rsize case, but it turns out it was slightly broken,
and it failed to handle the RVA != RA case at all. Hopefully, this
commit will fix all that.
- Give ndiscvt(8) the ability to process a .SYS file directly into
a .o file so that we don't have to emit big messy char arrays into
the ndis_driver_data.h file. This behavior is currently optional, but
may become the default some day.
- Give ndiscvt(8) the ability to turn arbitrary files into .ko files
so that they can be pre-loaded or kldloaded. (Both this and the
previous change involve using objcopy(1)).
- Give NdisOpenFile() the ability to 'read' files out of kernel memory
that have been kldloaded or pre-loaded, and disallow the use of
the normal vn_open() file opening method during bootstrap (when no
filesystems have been mounted yet). Some people have reported that
kldloading if_ndis.ko works fine when the system is running multiuser
but causes a panic when the modile is pre-loaded by /boot/loader. This
happens with drivers that need to use NdisOpenFile() to access
external files (i.e. firmware images). NdisOpenFile() won't work
during kernel bootstrapping because no filesystems have been mounted.
To get around this, you can now do the following:
o Say you have a firmware file called firmware.img
o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko
o Put the firmware.img.ko in /boot/kernel
o add firmware.img_load="YES" in /boot/loader.conf
o add if_ndis_load="YES" and ndis_load="YES" as well
Now the loader will suck the additional file into memory as a .ko. The
phony .ko has two symbols in it: filename_start and filename_end, which
are generated by objcopy(1). ndis_open_file() will traverse each module
in the module list looking for these symbols and, if it finds them, it'll
use them to generate the file mapping address and length values that
the caller of NdisOpenFile() wants.
As a bonus, this will even work if the file has been statically linked
into the kernel itself, since the "kernel" module is searched too.
(ndiscvt(8) will generate both filename.o and filename.ko for you).
- Modify the mechanism used to provide make-pretend FASTCALL support.
Rather than using inline assembly to yank the first two arguments
out of %ecx and %edx, we now use the __regparm__(3) attribute (and
the __stdcall__ attribute) and use some macro magic to re-order
the arguments and provide dummy arguments as needed so that the
arguments passed in registers end up in the right place. Change
taken from DragonflyBSD version of the NDISulator.
It does survive « make release ».
Uses an upcoming patch from the vendor branch (ntp-stable) of ntp-keygen.
Submitted by: Marius Strobl <marius@alchemy.franken.de>
you've specified a directory. It is intended to be used in building
custom releases over NFS where locking may be unreliable at best and
there is no contention that the locking is designed to arbitrate.
Other uses of this flag are discouraged. Document same in usage and
man page (including the warning about unwise).
Sponsored by: Timing Solutions
(1) use strlcpy instead of strncpy since the use here of the latter
was incorrect.
(2) Move 'N' case into proper sorted order (sorted the same way that
ls sorts its args).
This bring us several things:
- updated drivers
- IPv6 support at last
- ntp-genkeys is replaced by ntp-keygen
- ntptrace is now a script (courtesy of John Hay)
- lots of renamed files from .htm to .html (while I prefer .html, I
find the change a bit gratuitous)
- still no manpages :(
Please test and report.
Commit very much helped by: GNU arch (http://gnuarch.org/)
information being sent to the RADIUS server.
Logging of RADIUS accounting information moves to a ``set log [+-]radius''
level, along with the RADIUS alive info, and the version number is bumped
to 3.2 to reflect this.
Mostly submitted by: alx@sm.ukrtel.net (back in January)
MFC after: 3 weeks
apply the patch of bin/61718 (which should include/elimatate kern/61122 also).
It seems to fix a few annoying bugs.
PR: bin/61718, kern/61122
Submitted by: bg@sics.seohartman@mail.physik.uni-mainz.de
but conveniently, because ncpaddr.ncpaddr_family != AF_INET, the call to
ncpaddr_getip4addr() became a no-op leaving the local address as it was
(defaulting to whatever my hostname resolves to).
PR: 62050
Submitted by: Peter Jeremy <peter.jeremy@alcatel.com.au>
MFC after: 3 days
FFLAG_NEEDSYNC and fsync the file when select() next returns zero. This
dramatically speeds up the process of logging large amounts of data, while
leaving the essential semantics (that data can be expected to be on disk
if we crash) unchanged.
In my tests, this speeds up the rc phase of booting by 18-20%. [1]
YES PLEASE! by: phk [1]
enable the use as a port on older systems
- use absolute paths in all calls to external programs, to account for strange
PATH settings
- use INDEX or INDEX-5 depending on FreeBSD version, to enable the use on
FreeBSD 4.x as a port.
- conditionalize all 4.x/5.x differences on __FreeBSD_version, so that the
pkg_install tools can be kept in sync on 4.x and 5.x
- Bump PKG_INSTALL_VERSION
Reviewed by: portmgr (bento run)
MFC after: 4 weeks
- pkg_info: new flag -j (show the requirements script)
- pkg_info: fix verbose output when used on packages
- better handling of corrupt entries in /var/db/pkg
- differ between corrupt entires and packages not installed
- various small fixes
PR: 56989, 57016, 57029, 26468
- use glob patterns when matching packages by origin
- csh-style {...} choices in glob matching
- pkg_info: new flag -E (list matching package names only)
- pkg_version: new flag -T (test if a given name matches a pattern)
- new flag -X (interpret pattern as an extended regular expression)
PR: 56961
- parse version numbers of ports containing an underscore followed by a number correctly
- handle special strings pl, alpha, beta, pre and rc
PR: 56961
seeing status of mounted file system for jailed processes.
Pass full path of jail's root directory to the kernel. mount(8) utility is
doing the same thing already.
disappearing from the tree. We already were splitting the baby (using
the symbol for the vendor BROADCOM, but not for the device). Use
#defines for both.
the *filename* and not the pid_file(!). Stupid brain-fault on my part.
This could cause a segfault under -neworder if newsyslog had to rotate
multiple files, and later ones had specifed the 'N' flag.
Bug first reported by: le
MFC after: 3 days
-d option was equal to the one already saved and which caused
the pw utility to avoid updating values passed by other options
processed before the -d option in the code path.
Spotted by: Richard Caley <rjc@interactive.co.uk>
processes, and balance that by adding a 10-second delay after all the
processes have been signaled. Also improvement a few messages printed
with `-n' or `-v' processing (mostly signal-related messages).
MFC after: 13 days
files to rotate. The new order will first rotate all files that need
to be rotated, and then send a single signal to each process which
needs to be signaled, and finally it will compress all the files which
were rotated.
This means daemons will be signaled once per run of newsyslog, instead
of once per file rotated. Also, files will be compressed in order of
file-size (smallest to largest). Also, it waits for each file to be
completely compressed before starting the next one (effectively as if
the 'w' flag is specified for all entries in newsyslog.conf). This
avoids the situation of having 10 gzip's going at the same time (each
with a log.0 and a log.0.gz file active), and it also means that file
attributes can be reliably set on files after they are compressed.
NOTE: This commit does define NEWORDER (which you could get rid of if
you really don't trust this), but it does not flip the "-D neworder"
switch. So, at the moment none of these changes happen unless you
request them (perhaps by adding '<debug> neworder' in newsyslog.conf).
PR: bin/25070 inspired some parts of this
Submitted by: parts from bin/25070 done by Helge Oldach
MFC after: 14 days
the newsyslog.conf file. Rename one size-related variable, and move
another one from the stack into conf_entry. Add a routine to change
file-attributes (chown, chmod, chflags), instead of having several
places doing the same sequence of system-calls. A few cosmetic/style
changes.
These should not effect any users. Most of these probably look
pointless, but they are the "insignificant parts" of a much larger
update that I'll be committing soon. Doing these as a separate update
should make that update easier to read.
MFC after: 14 days
that had been written some months ago for other processing. This
should get rid of a few subtle situations where an existing log
file would not exist (for a short time) while it is being rotated.
MFC after: 16 days
about the risks of enabling raw sockets in prisons.
Because raw sockets can be used to configure and interact
with various network subsystems, extra caution should be
used where privileged access to jails is given out to
untrusted parties. As such, by default this option is disabled.
A few others and I are currently auditing the kernel
source code to ensure that the use of raw sockets by
privledged prison users is safe.
Approved by: bmilekic (mentor)
explicitly fsynced after kernel messages are logged. This option
should be syntax compatible with a similar option in Linux syslogd.
I've made some small changes to Pekka's patch, hoepfully I haven't
goofed anything.
PR: 66790
Submitted by: Pekka Savola <pekkas@netcore.fi>
Obtained from: Martin Schulze's syslogd
MFC after: 1 month
Syslogd should ensure that f_file is a valid file descriptor when
f_type is FILE, CONSOLE, TTY and for a PIPE where f_pid > 0. If the
descriptor is closed/invalid then the type should be set to UNUSED
or the pid should be set to 0.
To this end:
1) Don't close(f->f_file) if we can't send a message to a remote
host because the file descriptor used for remote logging is
stored in finet, not in f->f_file. f->f_file is probably
uninitialised, so I guess we usually end up closing fd 0.
2) Don't close PIPE file descriptors if they are invalid.
3) If the call to p_open fails, don't set the pid.
The OpenBSD patches in this area set f_file to -1 after the fd is
closed and then avoids calling close if f_file < 0. I haven't done
this, but it might be a good idea too.
Inspired by: PR 67139/OpenBSD
1) Use strncpy on strings out of utmp.
2) Avoid running off the start of one string while removing white space.
(I've used slightly different code to OpenBSD here.)
3) Ignore trailing spaces in the priority.
PR: 67139
Submitted by: Xin LI <delphij@FreeBSD.org.cn>
Obtained from: OpenBSD
1) Don't check for getopt returning '?', we have a default case.
2) Check if the priority is LOG_KERN correctly - in practice
LOG_KERN is 0, so it makes no difference. OpenBSD fixed a
different nearby bug that we don't have 'cos our definition
of LOG_MAKEPRI is different to OpenBSD's.
Copy a comment from OpenBSD, observing that LOG_KERN is 0.
Inspired by PR: 67139
_PATH_DEV will never change. In the un-likely event that _PATH_DEV
should ever change, watch(8) would have broke because of a
mis-generated device name.
Approved by: bmilekic (mentor)
Pointed out by: Yvan Boily
o getpwnam(3) returns NULL and does not set errno when the user does
not exist. Bail out with "no such user" instead of "Unknown error: 0".
PR: bin/67262
Submitted by: demon (-U flag)
MFC after: 3 weeks
trying to exclude the top end of the range since it should hurt to overlap
by 4 bytes in the off-chance the RSDP signature appears incorrectly at the
very top of our search space.
the value for "unknown" 0xffffffff. The underlying kernel drivers should
be updated to only return 255 but the ABI is used by too many userland
utilities.
Also, make this WARNS 6 compatible.
stored in EEPROM or NVRAM. It's inspired by the NetBSD eeprom(8) and
the SunOS/Solaris eeprom(1M) utilities. Currently, this eeprom(8)
only supports systems equipped with Open Firmware and is only tested
on Sun machines but should work on any platform using Open Firmware.
A bit more specific, eeprom(8) can be used on these systems to do the
same under FreeBSD as can be done using the printenv and setenv
commandos in the boot monitor. One thing that only hardly can be done
using the boot monitor but easily with eeprom(8) is to write a logo
to the "oem-logo" property. eeprom(8) may also be useful to recover
the boot monitor password (in the default configuration only as root,
of course), i.e. when the boot monitor allows you to boot but you
can't alter the configuration because the password is unknown. The
man page may also be a useful reference of the various configuration
variables.
The idea of eeprom(8) is that handlers can be written to add support
for any firmware that stores such configuration in EEPROM or NVRAM;
sort of e.g. eeprom(1M) on Solaris/x86 is used to turn PAE-support
on and off (stored in a file then, not hardware). In FreeBSD, a
candidate for this would be a handler for the EFI boot environment
for FreeBSD/ia64.
eeprom(8) uses some code from NetBSD (eeprom.c and the base for
eeprom.8), the handler for the Open Firmware /options node
(ofw_options.[c,h]) was written using ofw_util.[c,h] from ofwdump(8).
Reviewed by: ru (slightly earlier version of the man page)
- Make the code use the new OFIOCMAXVALUE instead of defining the maximum
length of property values locally.
- Move the application specific parts from ofw_util.c to ofwdump.c in
order to make ofw_util.c more library-like. While ofw_dump_properties()
could be made non-specific to ofwdump(8) it's currently optimized for
use in ofwdump(8) and making it a library-like function would just
complicate the code unnecessarily.
- Minor clean-up in ofw_util.c, e.g. make its use of getopt(3) the way
it's described in style(9), make its usage() static, etc.
- Add a comment in ofw_util.c about why it doesn't call usage() when
neither the "-a" option nor a node-name where given.
- Add ofw_optnode() and ofw_setprop(), helper functions for the
OFIOCGETOPTNODE and OFIOCSET ioctls respectively, to ofw_util.[c,h].
- Be consistent with the use of 'const' in ofw_util.[c,h] and add 'const'
to the function arguments that are acutally const but weren't declared
as such.
- Mark WARNS=6 clean.
Approved by: tmm
installation as far as most people are concerned but both 'Standard' and
'Select' begin with S and 'Select' is winning. This makes it so 'Select'
is not select-able using a keystroke but that is probably for the best
and the text on the screen adequately describes how to move back and forth
between 'Select' and 'Exit'.
Adapted from work by: josef@
PR: i386/37999
MFC after: 1 week
. forward declare all static functions
. add a couple of redundant parens in return statements where they've
been missing
. remove the space after exit since it's a function
the maximum amount of time jitter for root and other users, respectively.
Before starting a job, cron(8) will sleep a random number of seconds,
from 0 to the amount specified. This can help to smooth down load spikes
when a lot of jobs are to start at the beginning of a particular minute
(e.g., the first minute of an hour.)
PR: bin/66474
Submitted by: Dmitry Morozovsky <marck <@> rinet.ru>
where the RSD PTR can actually occur. According to section 5.2.2
of the ACPI spec, we only consider two regions for the base address:
1. EBDA (0x0 - 0x3FF)
2. High memory (0xE0000 - 0xFFFFF)
I don't know whether this fixes any actual problems but is more correct.
levels by which they are used. On a typical production setting (no
debug or filter logging) this will save an open/read/close system
call sequence per packet, approximately halving the system overhead
and reducing the overall overhead by 38%.
dd bs=1k count=512 if=/usr/share/dict/web2 |
ssh ppp-linked-host dd of=/dev/null
# time original-ppp -nat -foreground connection
Working in foreground mode
Using interface: tun0
2.822u 2.404s 2:00.31 4.3% 392+496k 8+18io 3pf+0w
# time new-ppp -nat -foreground connection
Working in foreground mode
Using interface: tun0
2.082u 1.173s 1:26.06 3.7% 379+450k 0+18io 0pf+0w
MFC after: 3 weeks
- Don't look for partitions inside a FreeBSD chunk on ia64 when mounting
the filesystems just before the chroot and install.
- Write entries out to /etc/fstab for filesystems that aren't inside a
FreeBSD chunk, but are a top-level chunk under the disk.
rarpd clobbered any AF_INET information already configured for a given
interface name, so interfaces with more than one IP address made rarpd
listen only for the last address out of all IP aliases.
I changed this, so that AF_LINK information is always collected first
(to ensure the interface name gets its link-layer address associated),
but while looking for AF_INET addresses, the configuration is cloned
if there has already been one IP address seen for that interface name.
Thus, rarpd now effectively listens on all subnets.
MFC after: 1 week
o mention that the acctfile has to exist for accton to work [1]
o add reference to acct.5
PR: 65071 [1] (slightly modified)
Submitted by: Marc Silver <marcs@draenor.org>
X-MFC after: re approval
pass function arguments and results.
Hopefully no functional changes except fixing a couple of
bugs which could cause endless loops if an ioctl() on an
interface would fail.
Remove global variables in favour of local ones.
Fix indentation of a couple of switch statements.
Overall, this program badly need cleaning up, as it relies
on information passed around through global variables.
Note: bthidd(8) is still not complete. Need to commit kernel
support (a-la Linux /dev/input) to feed HID events into kernel.
Also need to write bthidd(8) and bthidd.conf(5) man pages.
present in ndp(8).
The vendor branch import uses a _U_ macro to apply the GCC 'unused' attribute
to the rcs ids embedded in each source file. Teach ndp about this.
Removing the -compact option passed to .Bl macro to avoid useless .Pp macros;
Adding a missing period;
Using .Xr with .Nd since makewhatis(1) has no support for cases where the Xref is absent.
Informed by: ru
* `pkg_info -flags' needs either `-a' or a package name. [1]
* Add -Q option to manual page.
* Update `usage:' to match the manual page.
PR: misc/64786 [1]
Reviewed by: ru
MFC after: 3 days
tied to nfsd(8), exports is the configuration file users will most
likely need to configure when dealing with a NFS server.
Submitted by: Florian Hars <hars@bik-gmbh.de>
PR: docs/64714
MFC after: 3 days
exactly the same as patch from the PR, which also exited if the
config file was missing. I didn't use Jeff's patch because I was
worried that some people might start inetd, create the config file
and then HUP inetd.
PR: 60806
Submitted by: Jeff Ito <jeffi@rcn.com>
MFC after: 2 weeks
addresses. For arch's with 64-bit longs, this is a nop, but for i386 this
allows sysinstall to properly handle disks and filesystems > 1 TB.
Changes from the original patch include:
- Use d_addr_t rather than inventing a blkcnt type based on int64_t.
- Use strtoimax() rather than strtoull() to parse d_addr_t's from config
files.
- Use intmax_t casts and %jd rather than %llu to printf d_addr_t values.
Tested on: i386
Tested by: kuriyama
Submitted by: julian
MFC after: 1 month
o Add a -D option to not attempt to create the home directory.
o Treat the /nonexistent home directory specially. It means the user has
no home directory and it should not be created.
o Update Copyright year and my email.
/sbin to /usr/sbin. A symlink from /sbin/nologin -> /usr/sbin/nologin
is created for compatibility purposes.
This will probably not cause any problems, but anyone who is doing
anything particularly unusual with nologin(8) or shells in general might
be well advised to check that everything still works.
Bikesheds on: cvs-all, current
/sbin/nologin for compatibility purposes. Also, remove the NO_NOLOGIN_LOG
option; we don't need to worry about conserving space as much on the /usr
partition.
Note that usr.sbin/nologin is not yet hooked up to the build.
- Add DECL wrappers to libgeom.h.
- Rename structure members in libgeom.h to use a lg_ prefix for member
names. This is required because a few structures had members named
'class' which made g++ very unhappy.
- Catch gstat(8) and gconcat(8) up to these API changes.
Reviewed by: phk
This adds the former ports registered groups: proxy and authpf as well as
the proxy user. Make sure to run mergemaster -p in oder to complete make
installworld without errors.
This also provides the passive OS fingerprints from OpenBSD (pf.os) and an
example pf.conf.
For those who want to go without pf; it provides a NO_PF knob to make.conf.
__FreeBSD_version will be bumped soon to reflect this and to be able to
change ports accordingly.
Approved by: bms(mentor)
data buffering issue that corrupts files if two pw(8)'s run at the
same time as well as changing pw(8) so it uses the same locking
mechanism as PAM, vipw(8), pwd_mkdb(8), etc.
PR: bin/23501
Submitted by: Alex Kapranoff <alex (at) kapran (dot) bitmcnit (dot) bryansk (dot) su>
Approved by: rwatson (mentor)
MFC after: 5 days
records with time==0 get "the time of the last valid record", while records
where time goes backwards (compared to the previous record) are skipped.
Also prints a message saying how many records were changed or skipped due
to these checks. Check was inspired by a simpler check in OpenBSD's version.
This is all meant to sidestep problems that Tillman Hodgson noticed with 'ac'
when running sparc64 with 64-bit time_t's. The real problem is whatever is
creating wtmp records with ut_time==0, of course, but I have not yet figured
out what is doing that.
Reviewed by: no screams from freebsd-sparc64 or bde
MFC after: 2 weeks
so the program compiles without errors or warnings when DEBUG is defined on
sparc64 with 64-bit time_t's. Also have debug statements include the year
when printing records from a different year than 'now'. Also print out a
special timestamp in debug statements when ut_time==0.
Reviewed by: freebsd-sparc, bde
MFC after: 2 weeks
they want to delete '*'. It turns out that there is one valid case where
this might happen, installing to an empty DESTDIR.
Patch submitted by: schweikh
if_ndis.c has been split into if_ndis_pci.c and if_ndis_pccard.c.
The ndiscvt(8) utility should be able to parse device info for PCMCIA
devices now. The ndis_alloc_amem() has moved from kern_ndis.c to
if_ndis_pccard.c so that kern_ndis.c no longer depends on pccard.
NOTE: this stuff is not guaranteed to work 100% correctly yet. So
far I have been able to load/init my PCMCIA Cisco Aironet 340 card,
but it crashes in the interrupt handler. The existing support for
PCI/cardbus devices should still work as before.
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
done inside of chroot(2) to chrootdir. Added to help with sysinstall(8)
support of install to alternate root but possibly useful for setting up
jails, etc.
No objection from: portmgr@
Style(9) abuse due to: entire program violates style(9)
Approved by: rwatson (mentor)
libexec/ftp-proxy - ftp proxy for pf
sbin/pfctl - equivalent to sbin/ipf
sbin/pflogd - deamon logging packets via if_pflog in pcap format
usr.sbin/authpf - authentification shell to modify pf rulesets
Bring along some altq headers used to satisfy pfctl/authpf compile. This
helps to keep the diff down and will make it easy to have a altq-patchset
use the full powers of pf.
Also make sure that the pf headers are installed.
This does not link anything to the build. There will be a NO_PF switch for
make.conf once pf userland is linked.
Approved by: bms(mentor)
generic watchdoc(9) interface.
Make watchdogd(8) perform as watchdog(8) as well, and make it
possible to specify a check command to run, timeout and sleep
periods.
Update watchdog(4) to talk about the generic interface and add
new watchdog(8) page.
nologin(8), this causes a considerable (100K) increase in the binary size,
so I've added a NO_LOGIN_LOG option which disables this.
While I'm here, s/sizeof(MESSAGE)/sizeof(MESSAGE) - 1/, in order to
avoid writing the string-terminating zero byte.
No complaints from: -current
Approved by: rwatson (mentor)
This is the second of two commits; bring in the userland support to finish.
Teach libipsec and setkey about the tcp-md5 class of security associations,
thus allowing administrators to add per-host keys to the SADB for use by
the tcpsignature_compute() function.
Document that a single SPI must be used until such time as the code which
adds support to the SPD to specify flows for tcp-md5 treatment is suitable
for production.
Sponsored by: sentex.net
hostname rather than an IP. The code was copying the pointer to the
IP address instead of the IP address itself. The bug has existed
ever since ypset was first imported in 1994.
PR: bin/62550
Submitted by: aardvark@saintaardvarkthecarpeted.com
MFC after: 1 week
loading on a particular version of Windows. For example, a .INF file
for a Windows 2000 driver may have an empty [foo.NT.5.1] section which
will be ingored on Win2K (whose .INF parser won't look for sections
decorated with .NT.5.1) in favor of a [foo] section. Likewise, a
WinXP file will have an empty [foo] section which will be ignored in
favor of [foo.NT.5.1].
The problem is, we can handle both Win2K and WinXP drivers, and we
don't want to exclude either one.
As a workaround, we try to pretend we are WinXP by default and search
for sections decorated with .NT.5.1, but if we don't turn up any records,
we assume that maybe we're being fooled by a sabotaged .INF file and
make one more pass looking for undecorated sections instead.
This allows us to parse the .INF files for both the Win2K and the WinXP
Centrino wireless drivers.
I'd give anything for 5 minutes alone in a room with whoever wrote
Microsoft's .INF file parser. Just 5 minutes. That's all.
for storing the "diff -n" output. Some files (eg ports/INDEX,v) are too
big nowadays to fit on the stack.
Submitted by: Stephen Montgomery-Smith <stephen@math.missouri.edu>
if the line doesn't match ^<%d>, then treat it as a regular kernel
printf line. Previously if a kernel printf message started with "<"
it would be interpreted as a log message, often with LOG_EMERG
level. This was triggered by some printfs in sys/dev/aic7xxx/, and
can also happen with the partial lines that result if syslogd cannot
keep up with the rate of arrival of kernel messages.
Reviewed by: dwmalone
MFC after: 1 week
their lines.
Properly discard PCMCIA device declarations. I plan to support
PCMCIA cards, but they don't work yet, and it appears some .INF files
declare both PCI and PCMCIA device instances.
instead of creating them by hand and storing them in the CVS tree. Add
gensnmptree to the bootstrap tools (it is used to generated these files).
This simplifies the update procedure.
Submitted by: ru
return for getopt() and comparing to -1, ditto with fgetc() and EOF,
and using the kg_nice value from <sys/user.h>
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Reviewed by: obrien, bde (a while back)
Tested lightly on: ppc, i386, make universe
life easier" patch: I doubt this will affect anyone else, but the FreeBSD
Update build code was getting very confused by this.
Approved by: rwatson (mentor)
PR: bin/61087
Extend libsdp(3) API to allow service registration and removal.
Fix uninitialized variable bug in sdpcontrol(8).
Reviewed by: imp (mentor)
No objection: ru
- Unify the conditional assignments section so that architectural
exclusions come first, then options and !options, sorted by the
option name, also in directory order, then architecture specific
sections, sorted by the architecture name, with i386 being a
traditional exception.
Prodded by: bde
keys, don't just do a substring match on "Ndi\Params". Instead, check
explicitly for strings that begin with "Ndi\Params". Why? Because it's
possible to create your own keys with different paths, like
"PROSetNdi\NdiExt\Params" which is what Intel does in their PRO/1000
driver's .INF file.
SRCS to teach make(1) that many .c sources are dependent on it.
This fixes parallel (-j) builds and makes it possible to build
individual .o files separately.
While here, removed PROG from CLEANFILES -- it's taken care of
already by bsd.prog.mk.
When an NFS server is port-scanned nfsd sometimes exits. This has
happened 3 times the last few weeks.
Nfsd has been written to exit when accept(2) fails. Unfortunately
accept can sometimes make a "normal" return with errno ECONNABORTED
and in this case nfsd exits prematurely.
Solution:
Check for ECONNABORTED (and also EINTR, since nfsd uses signals)
and continue.
Submitted by: Bjoern Groenvall <bg@sics.se>
PR: 61084
sequence when machine is started without attached USB mouse. Only do
repeated attempts to re-open device if the usb module has been actually
loaded. Also fix broken logic in doing delays between open attempts - do
delays between attempts, not after each attempt.
Due to previous behaviour being very annoying for notebook owners this
is a good 5.2 MFC candidate.
MFC after: 2 days
very useful .dot files of your netgraph(4) to quickly visualize the
nodes, hooks and edges. An example of this can be found here:
http://people.freebsd.org/~green/sample-netgraph-dot.ps
If anyone would like to refine the output further, please do so.
In fdformat.c a closing parenthesis is at the wrong place. Instead of
adding sizeof _PATH_DEV + 1 to the length of argv[optind], the length of the
string starting (sizeof _PATH_DEV + 1) characters after argv[optind]'s
beginning (accessing junk memory if we jump over the terminating null
character) is passed to malloc().
PR: bin/60026
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
the NTx86 section decoration).
subr_ndis.c: correct the behavior of ndis_query_resources(): if the
caller doesn't provide enough space to return the resources, tell it
how much it needs to provide and return an error.
subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines;
ntoskrnl:
KefAcquireSpinLockAtDpcLevel
KefReleaseSpinLockFromDpcLevel
MmMapLockedPages
InterlockedDecrement
InterlockedIncrement
IoFreeMdl
KeInitializeSpinLock
HAL:
KfReleaseSpinLock
KeGetCurrentIrql
KfAcquireSpinLock
Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
copyrights to the inf parser files.
Add a -n flag to ndiscvt to allow the user to override the default
device name of NDIS devices. Instead of "ndis0, ndis1, etc..."
you can have "foo0, foo1, etc..." This allows you to have more than
one kind of NDIS device in the kernel at the same time.
Convert from printf() to device_printf() in if_ndis.c, kern_ndis.c
and subr_ndis.c.
Create UMA zones for ndis_packet and ndis_buffer structs allocated
on transmit. The zones are created and destroyed in the modevent
handler in kern_ndis.c.
printf() and UMA changes submitted by green@freebsd.org
and list_verbose(), so don't open /dev/pci read-write. This allows
pciconf -l[v] to work for non-root users, assuming the securelevel is
0 or -1.
Problem experienced by: William Michael Grim <wgrim@siue.edu>
case so that if devices need different initialization, we can key off
this in the rc scripts (currently unused). Also update the man page
which is a 100% duplicate of the rc scripts.
snprintf (buf, size, fmt, buf, etc). This only works by chance with our
libc, but fails (with a truncated string) on e.g. glibc.
Okayed by: sobomax
MFC after: 1 week
/libexec to /mnt2/libexec, and execute /mnt2/rescue/ldconfig to add
the /mnt2/lib and /mnt2/usr/lib library directories. Thanks to John Baldwin
for working to track this down.
Submitted by: jhb
than a char array. Emitting the data as a big char array works fine in
the typical case, where a .sys file may be ~50K in size. Unfortunately,
some .sys files can be several hundred Kbytes in size, or even several
megabytes in size. One extreme case is the Intel centrino wireless
driver, which is 2.4MB. This causes us to emit an ndis_driver_data.h
file that's on the order of 15MB in size, and gcc consumes enormous
amounts of virtual memory while trying to compile it. On my laptop,
with 128MB of RAM and 256MB of swap space, gcc consumed all available
VM and crashed without being able to compile if_ndis.o.
By emitting the array as assembler, we bypass the C compiler and consume
much less memory. I was able to easily test compile if_ndis.ko with the
centrino driver on my laptop after this change.
This is merely a convenience, and should not have any operational effect
on the NDISulator itself.
definitions for more than one device (usually differentiated by
the PCI subvendor/subdevice ID). Each device also has its own tree
of registry keys. In some cases, each device has the same keys, but
sometimes each device has a unique tree but with overlap. Originally,
I just had ndiscvt(8) dump out all the keys it could find, and we
would try to apply them to every device we could find. Now, each key
has an index number that matches it to a device in the device ID list.
This lets us create just the keys that apply to a particular device.
I also added an extra field to the device list to hold the subvendor
and subdevice ID.
Some devices are generic, i.e. there is no subsystem definition. If
we have a device that doesn't match a specific subsystem value and
we have a generic entry, we use the generic entry.
mostly used on 80x25 displays, and the actual window is about ten
characters narrower than that, resulting in the need for horizontal
scrolling. No functional change.
RELENG_5_2 candidate.
needed to be statically populated with device nodes. The first two are no
longer true, which makes the third pretty moot. In fact, we don't seem to
put device node bits into the distribution archives at all anymore.
So..... remove the god-aweful nasty hack that force unmounted devfs during
installation so that static device nodes could land in /dev. Now that the
vnode cleaner handles this case better this isn't strictly needed, but
axeing code in sysinstall is almost always benficial. Thanks to Don Lewis
for pointing out this attribute of sysinstall.
the case where there's an entry in the manufacturer's device list but
no corresponding installation section (and hence no AddReg assignments),
i.e. if dev = find_assign(sname, "AddReg"); returns NULL, then
don't try to dereference dev.
There is a fundamental problem with the handling of .INF files that
contain definitions for multiple devices: right now we dump all the
AddReg sections that we find, but don't distinguish what device they
belong to. This often results in duplicate keys.
Yes, it's what you think it is. Yes, you should run away now.
This is a special compatibility module for allowing Windows NDIS
miniport network drivers to be used with FreeBSD/x86. This provides
_binary_ NDIS compatibility (not source): you can run NDIS driver
code, but you can't build it. There are three main parts:
sys/compat/ndis: the NDIS compat API, which provides binary
compatibility functions for many routines in NDIS.SYS, HAL.dll
and ntoskrnl.exe in Windows (these are the three modules that
most NDIS miniport drivers use). The compat module also contains
a small PE relocator/dynalinker which relocates the Windows .SYS
image and then patches in our native routines.
sys/dev/if_ndis: the if_ndis driver wrapper. This module makes
use of the ndis compat API and can be compiled with a specially
prepared binary image file (ndis_driver_data.h) containing the
Windows .SYS image and registry key information parsed out of the
accompanying .INF file. Once if_ndis.ko is built, it can be loaded
and unloaded just like a native FreeBSD kenrel module.
usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf
into an ndis_driver_data.h file that can be compiled into if_ndis.o.
Contains an .inf file parser graciously provided by Matt Dodd (and
mercilessly hacked upon by me) that strips out device ID info and
registry key info from a .INF file and packages it up with a binary
image array. The ndiscvt(8) utility also does some manipulation of
the segments within the .sys file to make life easier for the kernel
loader. (Doing the manipulation here saves the kernel code from having
to move things around later, which would waste memory.)
ndiscvt is only built for the i386 arch. Only files.i386 has been
updated, and none of this is turned on in GENERIC. It should probably
work on pc98. I have no idea about amd64 or ia64 at this point.
This is still a work in progress. I estimate it's about %85 done, but
I want it under CVS control so I can track subsequent changes. It has
been tested with exactly three drivers: the LinkSys LNE100TX v4 driver
(Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK
(e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It
still needs to have a net80211 stuff added to it. To use it, you would
do something like this:
# cd /sys/modules/ndis
# make; make load
# cd /sys/modules/if_ndis
# ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h
# make; make load
# sysctl -a | grep ndis
All registry keys are mapped to sysctl nodes. Sometimes drivers refer
to registry keys that aren't mentioned in foo.inf. If this happens,
the NDIS API module creates sysctl nodes for these keys on the fly so
you can tweak them.
An example usage of the Broadcom wireless driver would be:
# sysctl hw.ndis0.EnableAutoConnect=1
# sysctl hw.ndis0.SSID="MY_SSID"
# sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc)
# ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up
Things to be done:
- get rid of debug messages
- add in ndis80211 support
- defer transmissions until after a status update with
NDIS_STATUS_CONNECTED occurs
- Create smarter lookaside list support
- Split off if_ndis_pci.c and if_ndis_pccard.c attachments
- Make sure PCMCIA support works
- Fix ndiscvt to properly parse PCMCIA device IDs from INF files
- write ndisapi.9 man page
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
such that 'ispcvt' can build. Unforunately 'ispcvt' is needed in order for
/etc/rc.d/syscons to run. This fixes the bug where I could not get my
keymap effective at boot.
it returns. This allows it to connect to the server side again, which
has been listening on IPv6 addresses exclusively for more than 2 years.
PR: 59369
(Lite Edition) respectively. These "lite" packages are streamlined to
provide users with the core essentials for each desktop and to fit on the
release disc 1.
Approved by: re (scottl)
permitting the administrator to select a securelevel top operate
at. Include a helpfile summarizing some of the information from
init(8). This allows for explicit configuration of securelevels,
which was previously implicit in Security Profile selection.
Currently, there are no checkboxes for the active securelevel,
because sysinstall's facilities for deriving "current settings"
from rc.conf may use only one variable, not two, and I opted for
the simplest approach at this point.
Approved by: re (scottl)
selection is used to drive two configuration parameters:
(1) Default enable/disable for sshd
(2) Default enable/disable for securelevels
Replace this with an explicit choice to enable/disable sshd. A
follow-up commit will add a configuration option to the Security
post-install configuration menu to set the securelevel in rc.conf
explicitly. This should reduce the level of foot-shooting associated
with accidental enabling of securelevels, make the nature and
implications of the securelevel configuration options more explicit,
as well as make the choice to enable/disable sshd more explicit.
Approved by: re (scottl)
(1) Document the notion of using jail(8) to run "virtual servers" or
just to constrain specific applications. If only running specific
applications, some configuration steps are unnecessary (such as
editing rc.conf).
(2) Add some more subsection headers to break up the bigger chunks of
text.
(3) Clarify the problems associated with applications binding all IP
addresses in the host, and attempt to be more specific about
potential application problems. Document how to force sshd to
bind the the right socket.
(4) Suggest that in a jailed application scenario, you might want to
have the host syslogd listen on the socket in the jail, rather
than running syslogd in the jail.
(5) Catch another reference to /stand/sysinstall.
Approved by: re (bmah implicitly)
check if it's already loaded or compiled into the kernel, and only try to
load it if it isn't.
PR: bin/59368
Submitted by: Jens Rehsack <rehsack@liwing.de>
is possible for an error to occur while trying to log an error, and
this can result in infinite recursion (or at least until we run out
of stack).
Rather than this, we ignore requests to log an error while logging an
error.
PR: 51253
MFC after: 2 weeks
Avoid implicit function calls by adding the proper include files.
Use const char copyright.
Fix some fprint formatting.
In the manual page:
Use the .Pa macro for filenames and locations.
Kill hard setence breaks.
Make use of the .Tn and .Dq macros.
Add some to text to the otherwise blank HISTORY section (taken from CVS).
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
- simplify by strdup.
- set ai_protocol in hints to TCP.
- g/c FAITH_NS (no description, not maintained for years)
- warn if connection from IPv4 mapped is reached.
- IPV6_V6ONLY if possible.
- unifdef -UFAITH4.
- drop rsh/rlogin support.
- deal with negative return value from wait3.
Obtained from: KAME
- realloc pedant.
- set sin6_scope_id before sending (link-local/multicast) packets
- removed an incorrect comment
- don't age non-gateway host routes.
- not remove global addresses on loopback interface from routing table
by route aging.
Obtained from: KAME
a SEMICOLON token (a newline or semicolon, or one of these preceded
by a comment and/or whitespace). The input stream was switched too
early and the parser was expecting a SEMICOLON in the included file
instead of after the filename in the include directive.
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Kept alive by: Adam C. Migus <adam@migus.org>
ums module, and allow for up to five attempts to open the device, with
two-second pauses in between, to allow time for USB controllers and
devices to probe and attach. My Gigabyte P4 Titan 848P motherboard has
a total of 15 ports on four hubs hanging off four controllers, and needs
at least half of that ten-second allowance to get ready.
MFC after: 7 days
deraadt NOTE: -I needs to take an arg (there's no way we can take no
arg/an arg with a single option)
- sscanf overrun
- no variable name on prototype.
- u_int32_t may not be u_long.
- skipped non-host route when printing neighbor cache entries.
- valid and preferred lifetimes are unsigned.
- wording.
Obtained from: KAME
- be more picky about argument parsing - like ERANGE.
- use u_long for args, not to lose accuracy/prevent overflow.
- socklen_t audit.
- Add -I (use icmp) option.
- warn if multiple addresses are present for dest.
- no need to pass tz.
- type pedant. check -p range.
- grab hlim from sysctl.
- typo in port number setting.
Obtained from: KAME
- check for encryption/authentication key together with algorithm.
- warned if a deprecated encryption algorithm (that includes "simple")
is specified.
- changed the syntax how to define a policy of a ICMPv6 type and/or a
code, like spdadd ::/0 ::/0 icmp6 134,0 -P out none;
- random cleanup in parser.
- use yyfatal, or return -1 after yyerror.
- deal with strdup() failure.
- permit scope notation in policy string (-P
esp/tunnel/foo%scope-bar%scope/use)
- simplify /prefix and [port].
- g/c some unused symbols.
Obtained from: KAME
no matter where in the directory structure it may be. Use this and the "-k"
flag in the generated gdbinit files so that the "getsyms" function in gdb
requires no user intervention to run and will find every module if they're
in the kernel build's module directory. This is still quite useful for
cases where gdb knows that the path for some modules is /boot/kernel and
others are in the object directory for /usr/src/sys/$ARCH/compile/kernel.
Approved by: grog
a partition size on ia64. It's not true.
o Ask for a mountpoint for EFI partitions as well and check that it
isn't "/".
o On ia64 we may need to add EFI partitions. Make sure we pass the
right arguments to Create_Chunk_DWIM() in that case.
to better deal with the fact that we need an EFI partition and
that we need to have a mountpoint for it.
o When creating a new partition, add EFI to the list of types
the user can select from. This makes it easy to create an EFI.
o Do not include wizard.c on ia64.
o The user cannot create a partition on ia64 that's a multiple of
the cylinder size. We don't have a notion of cyclinders.
o Also allow swap and filesystem partitions outside a freebsd slice.
This is typically the case for GPT.
o Allow chunks of type "whole" to be displayed at the top. This is
to allow a GPT disk to be labeled. We need a slice out of which we
can make partitions, but a GPT disk doesn't have slices. For GPT
disks a chunk of type "whole" can then be used as a placeholder.
depending on namespace pollution in <sys/stat.h> for the declarations of
struct timeval and utimes().
Fixed some style bugs in rev.1.30 and some nearby style bugs (mainly
unsorting and missing or extra blank lines).
Removed a wrong comment that was obtained from NetBSD in rev.1.14. It said
that chflags() reset the times that were set "above" by utimes(), but
utimes wasn't "above" in FreeBSD until rev.1.30, and chflags() does't
actually reset the times.
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
names containing glob(3) expressions would appear verbatim in the
output.
If such an mtree file were used by mtree in update mode, wrong things
would happen.
(aka RFC2292bis). Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.
Obtained from: KAME
dcons(4): very simple console and gdb port driver
dcons_crom(4): FireWire attachment
dconschat(8): User interface to dcons
Tested with: i386, i386-PAE, and sparc64.
stdin and stdout instead of relaying the data. Now it is possible
to say:
nghook -e path: hook /usr/local/bin/foo arg1 arg2
and foo will have the hook to path: at file descriptors 0 and 1.
Add an option to specify control messages to be send to the node before
either executing the program or entering the data relay loop.
character 1 byte past the end of cmdline[] when libedit is being used for
input, and avoid writing a null pointer 1 element past the end of margv[].
Reviewed by: gad
(1) Don't modify the configuration of the NFS server as a result of
selecting a profile. We already explicitly prompt for the NFS
server configuration during install, and the user may not get
much advance notice that we're turning it off again. Instead,
use profiles (for better or for worse) only for security tuning.
(2) Don't modify the sendmail setting as part of the security profile:
use the default from /etc/defaults/rc.conf rather than explicitly
specifying. Note that the default in /etc/defaults/rc.conf is
more conservative than the explicit rc.conf entry added by
sysinstall during install, as it does not permit SMTP delivery.
(3) Update "congratulations on your profile" text to reflect these
changes.
Note that security profiles now affect only the securelevel and sshd
settings. My leaning would be to make sshd an explicit configuration
option, move securelevels to the security menu, and drop security
profiles entirely. However, that requires more plumbing of sendmail
than I'm currently willing to invest.
We may want to add a "permit SMTP delivery" question to the install
process.
Skinny is the protocol used by Cisco IP phones to talk to Cisco Call
Managers. With this code, one can use a Cisco IP phone behind a FreeBSD
NAT gateway.
Currently, having the Call Manager behind the NAT gateway is not supported.
More information on enabling Skinny support in libalias, natd, and ppp
can be found in those applications' manpages.
PR: 55843
Reviewed by: ru
Approved by: ru
MFC after: 30 days
"will trim at" message printed when the user requests '-v'. The
previous code would often print the wrong time, such as:
On Sept 22, run: newsyslog -nv /var/log/wtmp
And see: will trim at Mon Sep 1 05:00:00 2003
correct msg: will trim at Wed Oct 1 05:00:00 2003
MFC after: 20 days
archaic at this point in time. Pretend nobody runs FreeBSD 1.x anymore
in order to not confuse people needlessly.
Laplink support probably doesn't even work at this point in time anyway...
would only match a leap year every 400 years. The parseDWM code first
showed up in April 2000, so the first time this bug would cause any
confusion is in Feb 2004.
MFC after: 18 days
only code-change is to add a "next_time" parameter to both routines (and
that is not used yet). A later update will make "next_time" more useful.
MFC after: 20 days
but has invalid 64 bit pointers for FACS and DSDT.
o Finish work to print all of the FADT and FACS.
o Resort the comment generating functions. Submitted by: marcel
Courtesy of: BSDcon back wall
- Add 'enable_exim="YES"' to rc.conf(5)
- Use the default exim configuration file from the port
- When using sendmail, disable some more scripts that use sendmail specific
parameters
- Have sysinstall tweak mailer.conf(5) substitution
- Use 'N' flag for newsyslog(8)
Submitted by: Oliver Eikemeier <eikemeier@fillmore-labs.com>
Reviewed by: sheldonh, simon
Tested by: myself (trhodes) and submitter
written by Stuart Walsh and Duncan Barclay (with some kibbitzing by
me). I'm checking it in on Stuart's behalf.
The BCM4401 is built into several x86 laptop and desktop systems. For the
moment, I have only enabled it in the x86 kernel config because although
it's a PCI device, I haven't heard of any standalone NICs that use it. If
somebody knows of one, we can easily add it to the other arches.
This driver uses register/structure data gleaned from the Linux
driver released by Broadcom, but does not contain any of the code
from the Linux driver itself. It uses busdma.
Update FADT for new fields including pm_profile, pstate_cnt, and cst_cnt.
Add acpi_print_gas() for printing various address formats.
Print FACS contents.
Remove unused code.
debugging options. Initial option is '-D TN=<time>', which can be
used to see how newsyslog would work if run at the specified time.
(time format is ISO 8601, since that is already supported).
MFC after: 23 days
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)
rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:
- Added support for jumbo frames. Currently, there seems to be
a limit of approximately 6200 bytes for jumbo frames on transmit.
(This was determined via experimentation.) The 8169S/8110S chips
apparently are limited to 7.5K frames on transmit. This may require
some more work, though the framework to handle jumbo frames on RX
is in place: the re_rxeof() routine will gather up frames than span
multiple 2K clusters into a single mbuf list.
- Fixed bug in re_txeof(): if we reap some of the TX buffers,
but there are still some pending, re-arm the timer before exiting
re_txeof() so that another timeout interrupt will be generated, just
in case re_start() doesn't do it for us.
- Handle the 'link state changed' interrupt
- Fix a detach bug. If re(4) is loaded as a module, and you do
tcpdump -i re0, then you do 'kldunload if_re,' the system will
panic after a few seconds. This happens because ether_ifdetach()
ends up calling the BPF detach code, which notices the interface
is in promiscuous mode and tries to switch promisc mode off while
detaching the BPF listner. This ultimately results in a call
to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
here turns the chip back on and restarts the 1-second timeout loop
that drives re_tick(). By the time the timeout fires, if_re.ko
has been unloaded, which results in a call to invalid code and
blows up the system.
To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
which stops the ioctl routine from trying to reset the chip.
- Modified comments in re_rxeof() relating to the difference in
RX descriptor status bit layout between the 8139C+ and the gigE
chips. The layout is different because the frame length field
was expanded from 12 bits to 13, and they got rid of one of the
status bits to make room.
- Add diagnostic code (re_diag()) to test for the case where a user
has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
NICs have the REQ64# and ACK64# lines connected even though the
board is 32-bit only (in this case, they should be pulled high).
This fools the chip into doing 64-bit DMA transfers even though
there is no 64-bit data path. To detect this, re_diag() puts the
chip into digital loopback mode and sets the receiver to promiscuous
mode, then initiates a single 64-byte packet transmission. The
frame is echoed back to the host, and if the frame contents are
intact, we know DMA is working correctly, otherwise we complain
loudly on the console and abort the device attach. (At the moment,
I don't know of any way to work around the problem other than
physically modifying the board, so until/unless I can think of a
software workaround, this will have do to.)
- Created re(4) man page
- Modified rlphy.c to allow re(4) to attach as well as rl(4).
Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
