All accesses to softc are now done under a mutex to prevent data races
between the open context and the interrupt handler.
Additionally, the wait time in twsi_transfer is bounded now.
Previously we could get stuck there forever if an interrupt got lost.
MFC after: 2 weeks
Debug messages can now be enabled per driver instance via a new sysctl.
Also, debug messages in TWSI_READ and TWSI_WRITE require debug level
greater than 1 as they are mostly redundant because callers of those
functions already log most interesting results.
NB: the twsi drivers call their device iichb, so the new sysctl will
appear under dev.iichb.N.
MFC after: 1 week
Add a new ioctl to vt to make it possible to export RGB offsets
set by vt drivers. This is needed to fix colors on X and Mesa
on some machines, especially on modern PowerPC64 BE ones.
With the appropriate changes in SCFB, to use this ioctl to find
out the correct RGB offsets, this fixes wrong colors on Talos II
and Blackbird, when used with their built-in video cards.
Reviewed by: alfredo
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29000
Currently agp(4) effectively assumes that only one driver instance
exists, as the generic attach routine attempts to create /dev/agpgart
and triggers a panic if it already exists. Instead, handle this
situation by creating /dev/agpgart<unit> and making /dev/agpgart an
alias of /dev/agpgart0 for compatibility.
PR: 187015
Reviewed by: imp, kib
Tested by: Yoshihiro Ota <ota@j.email.ne.jp> (earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33068
Instead of returning 0xffs some controllers, such as Layerscape generate
an external exception when someone attempts to read any register
of config space of a non-existing device other than PCIR_VENDOR.
This causes a kernel panic.
Fix it by bailing during device enumeration if a device vendor register
returns invalid value. (0xffff)
Use this opportunity to replace some hardcoded values with a macro.
I believe that this change won't have any unintended side-effects since
it is safe to assume that vendor == 0xffff -> hdr_type == 0xffff.
Sponsored by: Alstom
Obtained from: Semihalf
Reviewed by: jhb
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33059
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
Since revision 3.0 this structure grown another field, breaking access
to the following data structures. This change fixes the PCIe errors
decoding on newer systems.
MFC after: 2 weeks
Since iavf(4) no longer shares code with ixl(4) as of commit
f2fbd56a8d07665bc0a5e8b7e40026b50a591e2a and now has its own directory,
remove these now-unused iavf(4)-only files.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28638
The iavf(4) driver now uses a different source base from ixl(4), since
it will be the standard VF driver for new Intel Ethernet products going
forward, including ice(4). It continues to use the iflib framework
for network drivers.
Since it now uses a different source code base, this commit adds a new
sys/dev/iavf entry, but it re-uses the existing module name so no
configuration changes are necessary.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
Tested by: lukasz.szczepaniak@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28636
ACPI implementation of device_get_property would return "-1" when
property was found, but it's type wasn't supported.
This causes device_has_property to return false in that scenario, which
arguably could be considered as incorrect.
Fix that by returning "0" in that case.
Reviewed by: bz, mw
Tested by: mw
MFC after: 2 weeks
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D33103
Add driver for pcf85063 real time clock. Register set and get time
methods. Parse data obtained from bus according to specification
and fill kernel structures.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32817
Driver for tca6408 gpio expander over i2c bus. Expose API for
manipulating pin's direction, state and polarity inversion.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32819
They're allocated using standard newbus API,
which means that we rely on miibus to handle the allocation.
Add VSC8504 to the list of supported PHYs, as it is similar enough
to the VSC8501 that is already supported by this driver.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32816
DP83822 is a 10/100 Texas Instruments PHY.
Link status change interrupts are supported by the driver,
however not all boards have the PHY interrupt wired.
Because of that if failure to allocate an IRQ is not treated as an error.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32815
DP83867 is a 10/100/1000 Texas Instruments PHY.
Only SGMII mode is supported.
Link status changes can be checked through an interrupt generated by the PHY,
if available
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32813
Create a new miibus OFW specific layer leveraging miibus_fdt.c code.
PHY drivers can than read the properties using device_get_property(9) API.
Resource(interrupt) allocation is also supported.
In order to enable this each NIC/switch driver will have to be modified,
because of how miibus is attached to the parent driver.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32812
It is used to limit the max advertised speed.
The value is read from DT by mii_fdt code.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32816
In some cases we might want to limit the max speed advertised below of what
the PHY is capable of.
This is usually the case when we connect 1G capable PHY to 100M MAC, or when
some exotic physical connection is used.
Add a new mii_maxspeed field to mii_softc and parse it in mii_phy_dev_attach.
Speed limit is normally located in DT.
The property is already parsed in mii_fdt.c, but its value still has to be
passed by the PHY driver.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32727
Includes various feature improvements and bug fixes.
Notable changes include:
- Firmware logging support
- Link management flow changes
- New sysctl to report aggregated error counts
- Health Status Event reporting from firmware (Use the new read-only
tunables hw.ice.enable_health_events / dev.ice.#.enable_health_events
to turn this off)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
So, if we're processing a timeout, and we've sent an ABORT to the
firmware for that timeout, but not yet received the response from the
firmware, AND we get another timeout, we queue the timeout and freeze
the queue. However, when we've finally processed them all, we only
release the queue once. This causes all I/O to halt as the devq remains
frozen forever.
Instead, only freeze the queue when we start the process (eg set INRESET
on the target). This will allow the release when all the timed out I/Os
have finished ABORTing.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33054
This reverts commit 9ef7df022a ("hyperv: Register hyperv_timecounter
later during boot") and adds a comment explaining why the timecounter
needs to be registered as early as it is.
PR: 259878
Fixes: 9ef7df022a ("hyperv: Register hyperv_timecounter later during boot")
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33014
