Previosuly, USB_IFACE_DRIVER_ACTIVE would report that the driver is
active even after it detached. That's because a device(9) still
remains.
So, add device_is_alive(9) check for more accurate reporting.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43960
Since 5efea30f03 we can possibly lose a state transition which can
cause trouble further down the road.
The reproducer from 643d6dce6c can trigger these for example.
Drivers for firmware based wireless cards have worked around some of
this (and other) problems in the past.
Add an array of tasks rather than a single one as we would simply
get npending > 1 and lose order with other tasks. Try to keep state
changes updated as queued in case we end up with more than one at a
time. While this is not ideal either (call it a hack) it will sort
the problem for now.
We will queue in ieee80211_new_state_locked() and do checks there
and dequeue in ieee80211_newstate_cb().
If we still overrun the (currently) 8 slots we will drop the state
change rather than overwrite the last one.
When dequeing we will update iv_nstate and keep it around for historic
reasons for the moment.
The longer term we should make the callers of
ieee80211_new_state[_locked]() actually use the returned errors
and act appropriately but that will touch a lot more places and
drivers (possibly incl. changed behaviour for ioctls).
rtwn(4) and rum(4) should probably be revisted and net80211 internals
removed (for rum(4) at least the current logic still seems prone to
races).
PR: 271979, 271988, 275255, 263613, 274003
Sponsored by: The FreeBSD Foundation (in 2023)
MFC after: 3 days
Reviewed by: cc
Differential Revision: https://reviews.freebsd.org/D43389
device_set_usb_desc() first tries to fetch device information through
the iInterface descriptor, otherwise it falls back to usb_devinfo().
Since usb_devinfo() is both guaranteed to work, and is more verbose, get
rid of the initial iInterface attempt.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D43383
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43196
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: emaste, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43195
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: emaste, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43194
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43192
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191
dwc3 is big enough to have its own subdirectory.
While here only make it depend on kernel option dwc3 and rk_dwc3
without any SOC options.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43190
This is in preparation for annotating copyin() and related functions
with __result_use_check.
Reviewed by: wulf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43103
Some Raspberry Pi pass smsc95xx.macaddr=XX:XX:XX:XX:XX:XX as bootargs.
Use this if no ethernet address is found in an EEPROM.
As last resort fall back to ether_gen_addr() instead of random MAC.
PR: 274092
Reported by: Patrick M. Hausen (via ML)
Reviewed by: imp, karels, zlei
Tested by: Patrick M. Hausen
Approved by: karels
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D42463
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
An interface's bpf could feasibly not exist, in which case
bpf_peers_present() would panic from a NULL pointer dereference. Solve
this by adding a new IfAPI that could deal with a NULL bpf, if such
could occur in the network stack.
Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D42082
An interface's bpf could feasibly not exist, in which case
bpf_peers_present() would panic from a NULL pointer dereference. Solve
this by adding a new IfAPI that includes a NULL check. Since this API
is used in only a handful of locations, it reduces the the NULL check
scope over inserting the check into bpf_peers_present().
Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
The AX88179A has two firmware modes, one of which is backward
compatible with existing AX88178A/179 driver. The active firmware mode
can be controlled through a register.
Update axge(4) man page to mention 179A support and ensure that, when
bound to a AX88179A, the driver activates the compatible firmware mode.
Reviewed by: markj
Pull Request: https://github.com/freebsd/freebsd-src/pull/854
MFC after: 1 week
ieee80211_node_incref() is the FreeBSD implementation of
ieee80211_ref_node(). Not being interested in the node returned
it was used as a shortcut in 3 drivers (ath, uath, wpi).
Replace the call with the public KPI of ieee80211_ref_node() and
ignore the result.
This leaves us with the single internal call going
ieee80211_ref_node() -> ieee80211_node_incref() and that should
help increasing portability but also limiting the places to trace
for node reference operations.
Sponsored by: The FreeBSD Foundation
MFC after: 4 weeks
Newer versions of the AX88179 interweave dummies alongside valid
packet headers in bulk IN transfer data. This was probably done for
backward compatibility with existing drivers.
However current driver records these dummy headers as dropped frames,
leading to stats misreporting one Ierr per Ipkt.
This skips those dummy headers silently, thereby not generating Ierrs
for them.
Reviewed by: emaste
Pull Request: https://github.com/freebsd/freebsd-src/pull/842
Like other dwc3 controller, on Xilinx ZynqMP the base node is just here
to provide resets, the main dwc3 controller node is a child node.
Sponsored by: Beckhoff Automation GmbH & Co. KG
The XHCI controller on 64-bit SoCs need to use 64-bit DMA.
Add a quirk to tell the generic XHCI driver that 32-bit DMA needs
to be used, if there are any that may need to use 32-bit DMA only.
Reviewed by: andrew
Obtained from: Juniper Networks, Inc.
9600 was a standard baud rate decades ago, but 115200 is now more common
so choose defaults that are useful to the largest number of users.
Note that boot0sio does not support rates above 9600 so it remains
unchanged.
Reviewed by: bz, imp, manu
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36295
In commit c77bfaa750 uhid(4) gained support for ioctl from
USB_GET_DEVICEINFO. This is used in libraries like libfido2 to
retrieve information about a device.
This commit adds binary compatible version to hidraw(4).
PR: 264843
MFC after: 1 month
Requested by: grembo
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
While at it, correct the string for 300 series ones, these also are
already xHCI 3.1.
Fixes: d171d2f2 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/
Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791
