Change ad_firmware_geom_adjust() to operate on a struct disk * only and
hook it up to ada(4) also. While at it, rename *ad_firmware_geom_adjust()
to *ata_disk_firmware_geom_adjust() etc now that these are no longer
limited to ad(4). This also allows to maintain a compatibility shim for
pc98_ad_firmware_geom_adjust() for the tier-1 PC98 in stable/8.
Reviewed by: mav (r208349)
Add support for the U4 PCI-Express bridge chipset used in late-generation
Powermac G5 systems. MSI and several other things are not presently
supported.
The U3/U4 internal device support portions of this change were contributed
by Andreas Tobler.
Import mvs(4) - Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA controllers
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
Add support for SPARC64 V (and where it already makes sense for other
HAL/Fujitsu) CPUs. For the most part this consists of fleshing out the
MMU and cache handling, it doesn't add pmap optimizations possible with
these CPU, yet, though.
With these changes FreeBSD runs stable on Fujitsu Siemens PRIMEPOWER 250
and likely also other models based on SPARC64 V like 450, 650 and 850.
Thanks go to Michael Moll for providing access to a PRIMEPOWER 250.
r206443:
Small whitespace cleanup.
r206444 [1]:
- Rename bluetooth coexistence flags, no binary change.
- Enable DC calibration and crystal calibration on Centrino Advanced-N
6250 parts.
- Workaround for a HW bug (does not affect 4965AGN) that may sporadically
affect latency under some rare circumstances. From a similar commit to
iwlwifi.
- Update sensitivity settings for 5000 series to workaround a performance
bug in the DSP (1000 is not affected so we keep the old values for 5000).
- Update sensitivity settings for 6000 series.
- Set differential gains on 6250 too (but use a 1.0 factor, not 1.5).
- Init OFDM sensitivity with min value (which depends on the chip)
instead of hardcoding it to 90.
- Read calibration version from ROM and set IWN_GP_DRIVER_CALIB_VER6
bit on 6x50 if version >= 6.
r206445 [2]:
iwn4965_set_txpower() uses maxpwr from EEPROM to calculate the power to
set, it make sense to actually initialize that array. This fixes some
issues with 4965 adapters where the TX power is crucial.
This got lost somewhere while merging with the OpenBSD code.
r206446:
Update firmware for the 6000 series Intel cards to version 9.193.4.1.
r206474:
Add some missing protoypes.
r206475:
iwn5000_reset_sched() is not used; #ifdef it.
r206476:
Hook ieee80211_media_change() to ieee80211_vap_attach().
r206477:
Declare all functions as static.
r207001 [3]:
Use correct bus_dma_tag_t for TX frames.
Approved by: rpaulo (mentor)
Obtained from: Openbsd [1], [2]
Reported by: Andreas Nilsson <andrnils at gmail.com> [3]
Merge ACPICA 20100304.
MFC: r204874
Update module Makefile for ACPICA 20100304.
MFC: r204877
Allow ACPI module build on amd64. Although we strongly recommend building
it into kernel, there is no need to prevent it from building at all.
MFC: r204916
- Allow users to enable dumping Debug objects without ACPI debugger.
Setting the new sysctl MIB "debug.acpi.enable_debug_objects" to a non-zero
value enables us to print Debug object when something is written to it.
- Allow users to disable interpreter slack mode. Setting the new tunable
"debug.acpi.interpreter_slack" to zero disables some workarounds for common
BIOS mistakes and enables strict ACPI implementations by the specification.
MFC: r204920
Since the interpreter slack mode is a tunable now, enable a local hack only
when it is set. Note the default behaviour does not change by this change.
MFC: r204965
Fix white spaces.
MFC: r206117
Merge ACPICA 20100331 (and four additional upstream patches).
Add driver for Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet.
This driver was written by Alexander Pohoyda and greatly enhanced
by Nikolay Denev. I don't have these hardwares but this driver was
tested by Nikolay Denev and xclin.
Because SiS didn't release data sheet for this controller, programming
information came from Linux driver and OpenSolaris. Unlike other open
source driver for SiS190/191, sge(4) takes full advantage of TX/RX
checksum offloading and does not require additional copy operation in
RX handler.
The controller seems to have advanced offloading features like VLAN
hardware tag insertion/stripping, TCP segmentation offload(TSO) as
well as jumbo frame support but these features are not available
yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw>
who sent fix for receiving VLAN oversized frames.
Adds the option of seperating out the sctp stats per
processor. This will be refined further and is definetly
exploratory (which is why its an option) i.e. making it
allocate the actual number of processors is coming ;-D.
- Support for uncore counting events: one fixed PMC with the uncore
domain clock, 8 programmable PMC.
- Westmere based CPU (Xeon 5600, Corei7 980X) support.
- New man pages with events list for core and uncore.
- Updated Corei7 events with Intel 253669-033US December 2009 doc.
There is some removed events in the documentation, they have been
kept in the code but documented in the man page as obsolete.
- Offcore response events can be setup with rsp token.
Sponsored by: NETASQ
Provide groundwork for 32-bit binary compatibility on non-x86 platforms,
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
This MFC is required for MFCs of later changes to the freebsd32
compatibility from HEAD.
Requested by: kib
Add run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.
This driver was written for OpenBSD by Damien Bergamini and ported over by
Akinori Furukoshi.
Handling all the three clocks with the LAPIC may lead to aliasing for
softclock and profclock.
Revert the change when the LAPIC started taking charge of all three of
them.
Sponsored by: Sandvine Incorporated
Generate a second LINT configuration for i386 and amd64 in
sys/conf/makeLINT.mk, which includes LINT and sets options VIMAGE
so that we will have VIMAGE LINT builds. For now only do it for
those two architectures to avoid massive universe times for archs,
where people will less likely use VIMAGE or not at all.
done in CURRENT over the last 4 months.
HEAD and RELENG_8 are almost in sync now for ipfw, dummynet
the pfil hooks and related components.
Among the most noticeable changes:
- r200855 more efficient lookup of skipto rules, and remove O(N)
blocks from critical sections in the kernel;
- r204591 large restructuring of the dummynet module, with support
for multiple scheduling algorithms (4 available so far)
See the original commit logs for details.
Changes in the kernel/userland ABI should be harmless because the
kernel is able to understand previous requests from RELENG_8 and
RELENG_7. For this reason, this changeset would be applicable
to RELENG_7 as well, but i am not sure if it is worthwhile.
Make options KGSSAPI build and add it to NOTES.
rpcsec_gss_prot.c:
Use kernel printf and headers.
vc_rpcsec_gss.c:
Use a local RPCAUTH_UNIXGIDS definition for 16 instead of using NGROUPS.
framebuffer driver, etc. work on FreeBSD/amd64.
A significant amount of improvements were done by jkim@ during the recent
months to make vesa(4) work better, over the initial code import. This
work is based on OpenBSD's x86emu implementation and contributed by
paradox <ddkprog yahoo com> and swell.k at gmail com.
Hopefully I have stolen all their work to 8-STABLE :)
All bugs in this commit are mine, as usual.
Document the usfs driver and the NO_SYSCTL_DESCR option, and update the comment
for umass.
Don't include the sysctl description variables in aic7xxx when NO_SYSCTL_DESCR
is used.
Approved by: rrs (mentor)
Introduce the new kernel thread called "deadlock resolver".
It is used in order to seek within the threads state and heuristically
understand if there is any deadlock happening.
In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq
rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.
Sponsored by: Sandvine Incorporated
Add a driver by Fredrik Lindberg for Option HSDPA USB devices. These differ
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.
Obtained from: Fredrik Lindberg <fli@shapeshifter.se>
Add a driver for the `Fire' JBus to PCIe bridges found in at least
the Sun Fire V215/V245 and Sun Ultra 25/45 machines. This driver also
already includes all the code to support the `Oberon' Uranus to PCIe
bridges found in the Fujitsu-Siemens based Mx000 machines but due to
lack of access to such a system for testing, probing of these bridges
is currently disabled.
Unfortunately, the event queue mechanism of these bridges for MSIs/
MSI-Xs matches our current MD and MI interrupt frameworks like square
pegs fit into round holes so for now we are generous and use one event
queue per MSI, which limits us to 35 MSIs/MSI-Xs per Host-PCIe-bridge
(we use one event queue for the PCIe error messages). This seems
tolerable as long as most devices just use one MSI/MSI-X anyway.
Adding knowledge about MSIs/MSI-Xs to the MD interrupt code should
allow us to decouple the 1:1 mapping at the cost of no longer being
able to bind MSIs/MSI-Xs to specific CPUs as we currently have no
reliable way to quiesce a device during the transition of its MSIs/
MSI-Xs to another event queue. This would still require the problem
of interrupt storms generated by devices which have no one-shot
behavior or can't/don't mask interrupts while the filter/handler is
executed (like the older PCIe NICs supported by bge(4)) to be solved
though.
Hook ebus(4) and isa(4) up to the sun4v LINT build in order to
ensure that their compilation doesn't break as they are expected
to work as-is now (but aren't actually run-time tested).
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this option deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.
As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.(ata|atapi)_dma tunable work again.
Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.
Submitted by: nwitehorn (powerpc part)
Remove extra parantheses from usb_ethernet.c and usb_serial.c lines.
config(8) doesn't parse parantheses and instead treated them as being
part of the device driver name (e.g. '(u3g' vs 'u3g'). While here, fix the
style of these long lines to match the wrapping used for other long lines
in this file.
lindev(4) [1] is supposed to be a collection of linux-specific pseudo
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
Drop USB mass storage devices support from ata(4). It is out of the build as
long as I remember, and completely superseded by better maintained umass(4).
It's main idea was to optionally avoid CAM dependency for such devices, but
with move ATA to CAM, it is not actual any more.
No objections: hselasky@, thompsa@, arch@
Move inet_aton() (specular to inet_ntoa(), already present in libkern)
into libkern in order to made it usable by other modules than alias_proxy.
Sponsored by: Sandvine Incorporated
