related to "shared" CPLs.
a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single
function. Allow callers to direct the response to any iq. Tidy up
set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of
magic constants.
b) Remove all CPL handler tables from struct adapter. This reduces its
size by around 2KB. All handlers are now registered at MOD_LOAD instead
of attach or some kind of initialization/activation. The registration
functions do not need an adapter parameter any more.
c) Add per-iq handlers to deal with CPLs whose destination cannot be
determined solely from the opcode. There are 2 such CPLs in use right
now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send
filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq.
t4_tom (including the DDP code) now uses the port's ctrlq to send
L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq.
fwq and ofld_rxq have different handlers that know what kind of tid to
expect in the reply. Update t4_write_l2e and callers to to support any
wrq/iq combination.
Approved by: re@ (kib@)
Sponsored by: Chelsio Communications
The interface's queues are functional after VI_INIT_DONE (which is short
of interface-up) and that's all that's needed for t4_tom to communicate
with the chip.
Approved by: re@ (gjb@)
Sponsored by: Chelsio Communications
pci_if.
This allows bhnd(4) to manage per-device state (such as per-core
pmu/clock refcounting) on behalf of subclass driver instances.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6959
Replaces use of DEVICE_IDENTIFY with explicit enumeration of chipc
child devices using the chipc capability structure.
This is a precursor to PMU support, which requires more complex resource
assignment handling than achievable with the static device name-based
hints table.
Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6896
Replace m_getcl() with m_get2(); this fixes 'frame too long'
messages for frames, which are longer than MCLBYTES
(can be easily triggered when A-MSDU is used).
Tested with RTL8188CUS (AP) and RTL8188EU (STA).
Approved by: re (marius)
Free data buffers every time when device is stopped, not when
it is detached; they are allocated at the initialization stage.
How-to-reproduce:
1) ifconfig wlan0 create wlandev urtwn0 up
2) vmstat -m | grep USBdev
3) service netif restart
4) vmstat -m | grep USBdev
Also, remove usbd_transfer_drain() call; it is already called by
usbd_transfer_unsetup().
Tested with RTL8188CUS, STA mode.
Approved by: re (marius)
vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main
cxgbe/cxl interfaces and tunables related to them are not affected by
any of this and will continue to operate as usual.
The driver used to create an additional 'n' interface for every
cxgbe/cxl interface if "device netmap" was in the kernel. The 'n'
interface shared the wire with the main interface but was otherwise
autonomous (with its own MAC address, etc.). It did not have normal
tx/rx but had a specialized netmap-only data path. r291665 added
another set of virtual interfaces (the 'v' interfaces) to the driver.
These had normal tx/rx but no netmap support.
This revision consolidates the features of both the interfaces into the
'v' interface which now has a normal data path, TOE support, and native
netmap support. The 'v' interfaces need to be created explicitly with
the hw.cxgbe.num_vis tunable. This means "device netmap" will not
result in the automatic creation of any virtual interfaces.
The following tunables can be used to override the default number of
queues allocated for each 'v' interface. nofld* = 0 will disable TOE on
the virtual interface and nnm* = 0 to will disable native netmap
support.
# number of normal NIC queues
hw.cxgbe.ntxq_vi
hw.cxgbe.nrxq_vi
# number of TOE queues
hw.cxgbe.nofldtxq_vi
hw.cxgbe.nofldrxq_vi
# number of netmap queues
hw.cxgbe.nnmtxq_vi
hw.cxgbe.nnmrxq_vi
hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed.
--- tl;dr version ---
The workflow for netmap on cxgbe starting with FreeBSD 11 is:
1) "device netmap" in the kernel config.
2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll
end up with multiple autonomous netmap-capable interfaces for every
port.
3) "dmesg | grep vcxl | grep netmap" to verify that the interface has
netmap queues.
4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... .
One major improvement is that the netmap interface has a normal data
path as expected.
5) Just ignore the cxl interfaces if you want to use netmap only. No
need to bring them up. The vcxl interfaces are completely independent
and everything should just work.
---------------------
Approved by: re@ (gjb@)
Relnotes: Yes
Sponsored by: Chelsio Communications
This patch addes missing implementation of BHND_BUS_RESET_CORE function for BCMA.
The reset procedure is very simple: enable reset mode, stop clocking,
enable clocking & force clock gating, disable reset mode, stop clock gating.
Tested:
* (michael) Tested on ASUS RT-N53 for enabling/reset USB core
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: re (gjb)
We also need to consider the size of large firmware commands in iwm_alloc_tx_ring(),
in the dma tag creation, when qid == IWM_MVM_CMD_QUEUE. The old code apparently
only allocated a 2KB (MCLBYTES) sized buffer when it actually expected 4KB.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6824
(Together with other iwm(4) memory leak fixes) Memory leakage in M_DEVBUF
is now at ca. 2KB for each iwm(4) module load/unload cycle.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git eaf551a1d464c643e98ce5781971dd32124e9af1
Differential Revision: https://reviews.freebsd.org/D6819
* When bus_dmamem_alloc is used, the bus_dmamap_t is usually set to NULL, so
we were never actually freeing any dma memory allocations done via
iwm_dma_contig_alloc(). So we should check dma->vaddr instead of dma->map here.
* Also, the dmamap is actually supposed to be invalidated as part of
bus_dmamem_free(), so bus_dmamap_destroy() is never needed here.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git ef2b29a7ba6ca8a9d2c82ab591c0622227ff84cb
ic_macaddr is only used for the initial mac address provided by NVM. We should
rather use vap->iv_myaddr when vap != NULL, to allow the MAC address
to be changed later with ifconfig(8).
Submitted by: Imre Vadasz <imre@vdsz.com>
Reviewed by: avos
Approved by: re (gjb)
Obtained from: DragonflyBSD git 4aee7a78275676d22d14c04177bd0c9377d91478
Differential Revision: https://reviews.freebsd.org/D6743
I keep asking myself "what do these fields mean" and so now I've clarified
it for myself.
Tested:
* Reading the comments, going "a-ha!" a couple times.
Approved by: re (gjb)
version of the XHCI specification. Make sure the code can handle the
maximum number of allowed scratch pages.
Submitted by: Shichun_Ma@Dell.com
Approved by: re (hrs)
MFC after: 1 week
File and disk-backed I/O requests store counts of read/written disk
blocks in each AIO job so that they can be charged to the thread that
completes an AIO request via aio_return() or aio_waitcomplete(). This
change extends AIO jobs to store counts of received/sent messages and
updates socket backends to set these counts accordingly. Note that
the socket backends are careful to only charge a single messages for
each AIO request even though a single request on a blocking socket might
invoke sosend or soreceive multiple times. This is to mimic the
resource accounting of synchronous read/write.
Adjust the UNIX socketpair AIO test to verify that the message resource
usage counts update accordingly for aio_read and aio_write.
Approved by: re (hrs)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D6911
It turns out that getting decent performance requires stacking the TX
FIFO a little more aggressively.
* Ensure that when we complete a frame, we attempt to push a new frame
into the FIFO so TX is kept as active as it needs to be
* Be more aggressive about batching non-aggregate frames into a single
TX FIFO slot. This "fixes" TDMA performance (since we only get one
TX FIFO slot ungated per DMA beacon alert) but it does this by pushing
a whole lot of work into the TX FIFO slot.
I'm not /entirely/ pleased by this solution, but it does fix a whole bunch
of corner case issues in the transmit side and fix TDMA whilst I'm at it.
I'll go revisit transmit packet scheduling in ath(4) post 11.
Tested:
* AR9380, STA mode
* AR9580, hostap mode
* AR9380, TDMA client mode
Approved by: re (hrs)
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
1) Unload mbuf instead of descriptor in rtwn_tx_done().
2) Add more synchronization for device visible mappings before
touching the memory.
3) Improve watchdog timer logic.
Reported and tested by: mva
Approved by: re (gjb)
Remove frames from active/pending Tx queues and free related node
references when vap is destroyed to prevent various use-after-free
scenarios.
Reported and tested by: Aleksander Alekseev <afiskon@devzen.ru>
PR: 208632
Approved by: re (gjb)
Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.
- Fix possible use of invalid pointer.
It was possible to use an invalid pointer to get the target ID value. To fix
this, initialize a local Target ID variable to an invalid value and change that
variable to a valid value only if the pointer to the Target ID is not NULL.
- No need to set the MPSSAS_SHUTDOWN flag because it's never used.
- done_ccb pointer can be used if it is NULL.
To prevent this, move check for done_ccb == NULL to before done_ccb is used in
mpssas_stop_unit_done().
- Disks can go missing until a reboot is done in some cases.
This is due to the DevHandle not being released, which causes the Firmware to
not allow that disk to be re-added.
Reviewed by: ken
Approved by: re (gjb), ken, scottl, ambrisko (mentors)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6872
This started showing up when doing lots of aggregate traffic. For TDMA it's
always no-ACK traffic and I didn't notice this, and I didn't notice it
when doing 11abg traffic as it didn't fail enough in a bad way to trigger
this.
This showed up as the fifo depth being < 0.
Eg:
Jun 19 09:23:07 gertrude kernel: ath0: ath_tx_edma_push_staging_list: queued 2 packets; depth=2, fifo depth=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe000385f068, start=1, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now 0 (1)
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe0003866fe8, start=0, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now -1 (0)
So, clear the flags before adding them to a TX queue, so if they're
re-added for the retransmit path it'll clear whatever they were and
not double-account the FIFOEND flag. Oops.
Tested:
* AR9380, STA mode, 11n iperf testing (~130mbit)
Approved by: re (delphij)
It turns out the frame scheduling policies (eg DBA_GATED) operate on
a single TX FIFO entry. ASAP scheduling is fine; those frames always
go out.
DBA-gated sets the TX queue ready when the DBA timer fires, which triggers
a beacon transmit. Normally this is used for content-after-beacon queue
(CABQ) work, which needs to burst out immediately after a beacon.
(eg broadcast, multicast, etc frames.) This is a general policy that you
can use for any queue, and Sam's TDMA code uses it.
When DBA_GATED is used and something like say, an 11e TX burst window,
it only operates on a single TX FIFO entry. If you have a single frame
per TX FIFO entry and say, a 2.5ms long burst window (eg TDMA!) then it'll
only burst a single frame every 2.5ms. If there's no gating (eg ASAP) then
the burst window is fine, and multiple TX FIFO slots get used.
The CABQ code does pack in a list of frames (ie, the whole cabq) but
up until this commit, the normal TX queues didn't. It showed up when
I started to debug TDMA on the AR9380 and later.
This commit doesn't fix the TDMA case - that's still broken here, because
all I'm doing here is allowing 'some' frames to be bursting, but I'm
certainly not filling the whole TX FIFO slot entry with frames.
Doing that 'properly' kind of requires me to take into account how long
packets should take to transmit and say, doing 1.5 or something times that
per TX FIFO slot, as if you partially transmit a slot, when it's next
gated it'll just finish that TX FIFO slot, then not advance to the next
one.
Now, I /also/ think queuing a new packet restarts DMA, but you have to
push new frames into the TX FIFO. I need to experiment some more with
this because if it's really the case, I will be able to do TDMA support
without the egregious hacks I have in my local tree. Sam's TDMA code
for previous chips would just kick the TXE bit to push along DMA
again, but we can't do that for EDMA chips - we /have/ to push a new
frame into the TX FIFO to restart DMA. Ugh.
Tested:
* AR9380, STA mode
* AR9380, hostap mode
* AR9580, hostap mode
Approved by: re (gjb)
This allows IPv6 link local addresses (and other IPv6 functionality) to work.
PR: 210355
Submitted by: Steve Wahl and David Bright (both at Dell Inc.)
Reviewed by: cem, mav
Tested by: mav (on Intel hardware)
Approved by: re (kib)
MFC after: 5 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6885
Maps Sonics/OCP per-core address spaces to bcma(4)-compatible port/region
identifiers.
This permits the use of common address map identifiers in bhnd device
drivers, independent of the underlying interconnect type.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6850
- Delete all chipc children on attachment failure.
- Added missing bhnd_nexus bhnd_bus_deactivate_resource implementation.
- Drop a CHIPC_UNLOCK() accidentally left behind after lifting
synchronization into the chipc region refcounting API.
- Fix re-allocation of chipc resources. Previously, the resource ID was
reset to -1 on release, preventing later re-allocation.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6849
supported, e.g. CPUID or MSR, return ENODEV from the ioctl which needs
that feature.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (hrs)
Inserting a full mbuf with an external cluster into the socket buffer
resulted in sbspace() returning -MLEN. However, since sb_hiwat is
unsigned, the -MLEN value was converted to unsigned in comparisons. As a
result, the socket buffer was never autosized. Note that sb_lowat is signed
to permit direct comparisons with sbspace(), but sb_hiwat is unsigned.
Follow suit with what tcp_output() does and compare the value of sbused()
with sb_hiwat instead.
Approved by: re (gjb)
Sponsored by: Chelsio Communications
This reduces the size of kaiocb slightly. I've also added some generic
fields that other backends can use in place of the BIO-specific fields.
Change the socket and Chelsio DDP backends to use 'backend3' instead of
abusing _aiocb_private.status directly. This confines the use of
_aiocb_private to the AIO internals in vfs_aio.c.
Reviewed by: kib (earlier version)
Approved by: re (gjb)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D6547
Release the hold on ep->com immediately after sending the RST. This
fixes a bug that sometimes leaves userspace iWARP tools hung when the
user presses ^C.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Approved by: re (gjb@)
Sponsored by: Chelsio Communications
When allocating a new mbuf or bus_dmamap_load()-ing it fails,
we can just keep the old mbuf since we are dropping that packet anyway.
Instead of doing bus_dmamap_create() and bus_dmamap_destroy() all the time,
create an extra bus_dmamap_t which we can use to safely try
bus_dmamap_load()-ing the new mbuf. On success we just swap the spare
bus_dmamap_t with the data->map of that ring entry.
Tested:
Tested with Intel AC7260, verified with vmstat -m that new kernel no
longer visibly leaks memory from the M_DEVBUF malloc type.
Before, leakage was 1KB every few seconds while ping(8)-ing over the wlan
connection.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re@
Obtained from: DragonflyBSD.git cc440b26818b5dfdd9af504d71c1b0e6522b53ef
Differential Revision: https://reviews.freebsd.org/D6742
For DWC_GMAC_ALT_DESC implementations, the multicast hash table has only
64 entries. Instead of 8 registers starting at 0x500, a pair of registers
at 0x08 and 0x0c are used instead.
Approved by: re (hrs)
Submitted by: Guy Yur <guyyur@gmail.com>
Some later code I'll commit pushes lists of frames into the EDMA TX
FIFO, rather than a single frame at a time. The CABQ code already
pushes frame lists, but it turns out we should actually be doing it
in general or performance tanks. :(
Since key table is cleared on every device shutdown,
static WEP keys (which are set only once) need to be
reinstalled manually every time when device starts running.
Tested with RTL8188EU, STA (all ciphers) / IBSS (WPA-none) modes.
r298930 removed the inittodr call, but it seems like this prevents
"calcru: runtime went backwards ..." messages from occasionally appearing
when resuming from migration.
Reported by: Karl Pielorz <kpielorz@tdx.co.uk>
Sponsored by: Citrix Systems R&D
ticks are signed int and if statistics is not updated for a long time
(more than INT_MAX ticks, but less than UINT_MAX) difference becomes
negative and less than hz for a long time.
Other option to repeat is simply load driver (which initializes
timestamps to 0) when ticks are negative.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6777
This fixes a warning that occurs in a number of files that use the
random_harvest_queue function.
Differential Revision: https://reviews.freebsd.org/D4229
Submitted by: stevek@juniper.net
Reviewed by: markm
Approved by: so
Changes:
- Fixed incorrect MIPS74k vendor ID in the bhnd core descriptor tables
- Fixed MIPS core driver's matching against MIPS/MIPS33 cores.
- Improved MIPS3302 core description.
- Enabled BUS_PASS_BUS on the bhnd nexus drivers to allow early probing
of the MIPS core.
- Enabled BUS_PASS_CPU on the MIPS core driver to ensure correct attach
order.
- Disabled matching of the MIPS core driver on non-SoC devices.
Reviewed by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6735
This patch adds the missing pieces needed for device setup using the
mlx5en driver inside a virtual machine which is providing hardware
access through SR-IOV.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Validate the scheduling class against the actual limit (which is chip
specific) instead of a magic number.
- Return an error if an attempt is made to manipulate the tx queues of a
VI that hasn't been initialized.
Sponsored by: Chelsio Communications
The SYSINIT runs at SI_SUB_KICK_SCHEDULER after the scheduler is fully
initialized and timers are working. This fixes booting in the
EARLY_AP_STARTUP case.
A couple of mostly cosmetic fixes for the final initialization of netfront:
- Switch to "connected" state before starting to kick the rings.
- Correctly use "rxq" in the initialization loop (previously rxq was not
updated in the loop, and netfront would kick np->rxq[N] several times).
- Declare and define xn_connect as static, it's not used outside of this
file.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6657
In mediatek etherswitch support, functions mtkswitch_reg_write32_mt7621
and mtkswitch_reg_read32_mt7621 are called without locks held, so
lock assertions fail. Remove the lock assertions.
Sponsored by: Smartcom - Bulgaria AD
This is done because one has no point to have more channels since they
will be unused.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D6720
And fix message processing; only channel messages are supported.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6706
This is a NOP.
The COMPAT_IA32 was renamed in r205014 to COMPAT_FREEBSD32 and
COMPAT_ARCH32 does not seem to have existed. Also remove some
leftovers from the sysent rework in r301404. Include
freebsd32_util.h for the freebsd32_sysent prototype.
X-MFC-With: r301404
Reported by: kib
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This trips me up whenever I'm fooling around with partially supported
NICs that fail to fully attach or initialise - the firmware gets loaded
and references, but something fails - and the firmware references
aren't cleaned up.
After perusing the PHY-LP code (don't ask why; honest) I discovered that
it /has/ 5GHz support - but it's not ever used. I found one NIC - a
BCM4312 w/ pci id 0x4315 - which advertised dual-band PHY-LP support.
Turns out it works.
Whilst here, move up the support bit logging code so I can use it
to debug this.
Tested:
* BCM4312 (pci id 0x4315); 5GHz STA operation
On Medford, licenses are required to enable RX and event cut through and to
disable RX batching. To avoid the need for the driver to make decisions based on
the licensing state, the MC_CMD_INIT_EVQ has been extended to allow us to leave
the decision to the firmware. If the adapter is licensed for low-latency use,
the firmware will choose the optimal settings for latency, otherwise it will use
the best settings for throughput.
For Huntington we still need to choose the settings ourselves.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6717
the graphics drivers can benefit from access to the lid handle for querying and getting notifications
Submitted by: kmacy
Differential Revision: https://reviews.freebsd.org/D6643
Add support for fetching SPROM data from OTP on chipsets with an
IPX OTP controller (including the BCM43225).
This integrates the NVRAM data source into the chipc_caps capability
structure, and adds a sprom_offset field that can be used with OTP
to locate the SPROM image data (found within the general use
region, H/W subregion).
This also removes one of two duplicate parse error messages reported by
both the bhnd_sprom driver and the underlying SPROM parsing API.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6729
Now that bhnd(4) provides feature parity with the previous siba/mips
implementation, we can switch sentry5 over and begin lifting common
support code out for use across bhnd(4) embedded targets.
Changes:
- Fixed enumeration of siba(4) per-core address maps, required for
discovery of memory mapped chipc flash region on siba(4) devices.
- Simplified bhnd kernel configuration (dropped 'bhndbus' option).
- Replaced files.broadcom's direct file references with their
corresponding standard kernel options.
- Lifted out common bcma/siba nexus support, inheriting from the new
generic bhnd_nexus driver.
- Dropped now-unused sentry5 siba code.
- Re-integrated BCM into the universe build now that it actually compiles.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6712
This adds support for serial (via SPI) and parallel (via CFI) flash
as found on BCM47xx/BCM53xx SoCs.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6250
- Correct IRQ lines for UART (to fix IRQ lookup in future)
- Check device unit in resource assignment during chipc_add_child
- If chipc hint->size is RM_MAX_END, resource end should be same as window end
- Clear reference from resource list entry to resource in case of resource release
- Add CHIPC_GET_CAPS implementation
- Correct chipc flash constants (to be unshifted)
- Default implementation of get_attach_type should iterate over device tree
- Add default implementation for BHND_CHIPC_GET_CAPS usable by chipc grandchildren
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6584
PowerPC64 has two different ABIs, neither of which is elf64_freebsd_sysvec.
Using sysent and freebsd32_sysent achieves the same effect.
X-MFC-With: r301130
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
When the low-latency firmware variant is running, it is reported as not
being capable of batching RX events, but it can still do so if the
FORCE_EV_MERGING flag is set on an RXQ. Therefore we need to handle
batched RX events even if the capability isn't set.
If this bug is fixed in the firmware such that the capability is set
even when running the low-latency firmware variant, it will almost
always be reported so I don't think we lose much by removing the check.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6705
This also adjusts the timer values used to match the Linux net
driver implementation:
a) non-zero time intervals should result in at least one quantum
b) timer load/reload values are only zero biased for Falcon/Siena
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6704
BAR size to 1MB. According to Xeon v3 specifications and my tests, that
size register is write-once and so not writeable after BIOS written it.
Instead of that, make the code work with BAR of any sufficient size,
properly calculating offset within its base. It also simplifies the code.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
NTB_MSIX_RECEIVED status, before making upper layers overwrite it.
This is not completely perfect, but now it works better then before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Improvements after r301220.
Bus space methods are not called so simple pmap_mapdev will suffice.
Use OF_getencprop to get buffer with already converted endianess.
Pointed out by: ian
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
The current error path in case of failure during attach/initialization is
not correct and leaves blkback in a stuck state. This is due to blkback
waiting for blkfront to switch to state XenbusStateClosed, but if blkfront
never attached (because the guest is not even started) it cannot possibly
make it to that state.
Instead just wait for the frontend to be in a state different than
XenbusStateConnected in order to proceed with the shutdown. Also, it is
wrong to call xbb_detach directly because it destroys the lock which can
still be used by xbb_frontend_changed.
Sponsored by: Citrix Systems R&D
Hotplug scripts are needed in order to use fancy disk configurations in xl,
like iSCSI disks. The job of hotplug scripts is to locally attach the disk
and present it to blkback as a block device or a regular file.
This change introduces a new xenstore node in the blkback hierarchy, called
"physical-device-path". This is a straigh replacement for the "params" node,
which was used before.
Hotplug scripts will need to read the "params" node, perform whatever
actions are necessary and then write the "physical-device-path" node. The
hotplug script is also in charge of detaching the disk once the domain has
been shutdown.
Sponsored by: Citrix Systems R&D
That check wasn't enough to handle appending a two byte character
following it.
This prevented my T400 (Intel Core 2 Duo P8400) from attaching;
it would panic from a stack overflow detection.
Only HMAC-SHA256 is added as it is the only SHA-2 variant supported by
cryptodev. It is not possible to register hardware support for other
algorithms in the family including regular non-keyed SHA256.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6219
The output of HMAC was previously truncated to 12 bytes. This was only
correct in case of one particular crypto client - the new version of IPSEC.
Fix by taking into account the cri_mlen field in cryptoini session request
filled in by the client.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6218
TDMA and CESA registers are placed in different ranges of memory. Split
memory resource in DTS to reflect that. This change is needed to support
multiple CESA nodes as otherwise the ranges of different nodes would
overlap.
In consequence, CESA_WRITE and CESA_READ macros have been split depending
on which range of registers is accessed. Offsets for CESA registers have
been modified as the base address has changed.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6217
On other platforms with CESA accelerator the SRAM memory is mapped in
early init before driver is attached. This method only works correctly
with mappings no smaller than L1 section size (1MB). There may be more
SRAM blocks and they may have smaller sizes than 1MB as is the case
for Armada38x. Instead, map SRAM memory with bus_space_map() in CESA
driver attach. Note that we can no longer assume that VA == PA for the
SRAM.
Submitted by: Michal Stanek <mst@semihalf.com
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6215
The PV backend will only pick the new options when the interface is detached
and reattached again, so perform a full reset when changing options. This is
very fast, and should not be noticeable by the user.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6658
Just calling gnttab_end_foreign_access_ref doesn't free the references,
instead call gnttab_end_foreign_access with a NULL page argument in order to
have the grant references freed. The code that maps the ring
(xenbus_map_ring) already uses gnttab_grant_foreign_access which takes care
of allocating a grant reference.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6608
This patch fixes two issues seen on hot-unplug. The first one is a panic
caused by calling ether_ifdetach after freeing the internal netfront queue
structures. ether_ifdetach will call xn_qflush, and this needs to be done
before freeing the queues. This prevents the following panic:
Fatal trap 9: general protection fault while in kernel mode
cpuid = 2; apic id = 04
instruction pointer = 0x20:0xffffffff80b1687f
stack pointer = 0x28:0xfffffe009239e770
frame pointer = 0x28:0xfffffe009239e780
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (thread taskq)
[ thread pid 0 tid 100015 ]
Stopped at strlen+0x1f: movq (%rcx),%rax
db> bt
Tracing pid 0 tid 100015 td 0xfffff800038a6000
strlen() at strlen+0x1f/frame 0xfffffe009239e780
kvprintf() at kvprintf+0xfa0/frame 0xfffffe009239e890
vsnprintf() at vsnprintf+0x31/frame 0xfffffe009239e8b0
kassert_panic() at kassert_panic+0x5a/frame 0xfffffe009239e920
__mtx_lock_flags() at __mtx_lock_flags+0x164/frame 0xfffffe009239e970
xn_qflush() at xn_qflush+0x59/frame 0xfffffe009239e9b0
if_detach() at if_detach+0x17e/frame 0xfffffe009239ea10
netif_free() at netif_free+0x97/frame 0xfffffe009239ea30
netfront_detach() at netfront_detach+0x11/frame 0xfffffe009239ea40
[...]
Another panic can be triggered by hot-plugging a NIC:
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0xffffffff80902203
stack pointer = 0x28:0xfffffe00508d3660
frame pointer = 0x28:0xfffffe00508d36a0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 2960 (ifconfig)
[ thread pid 2960 tid 100088 ]
Stopped at xn_txq_mq_start+0x33: divl %esi,%eax
db> bt
Tracing pid 2960 tid 100088 td 0xfffff8000850aa00
xn_txq_mq_start() at xn_txq_mq_start+0x33/frame 0xfffffe00508d36a0
ether_output() at ether_output+0x570/frame 0xfffffe00508d3720
arprequest() at arprequest+0x433/frame 0xfffffe00508d3820
arp_ifinit() at arp_ifinit+0x49/frame 0xfffffe00508d3850
xn_ioctl() at xn_ioctl+0x1a2/frame 0xfffffe00508d3890
in_control() at in_control+0x882/frame 0xfffffe00508d3910
ifioctl() at ifioctl+0xda1/frame 0xfffffe00508d39a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe00508d3a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe00508d3ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe00508d3bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00508d3bf0
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011e185a, rsp =
0x7fffffffe478, rbp = 0x7fffffffe4c0 ---
This is caused by marking the driver as active before it's fully
initialized, and thus calling xn_txq_mq_start with num_queues set to 0.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6646
In order to use custom taskqueues we would have to mask the interrupt, which
is basically what is already done for an interrupt handler, or else we risk
loosing interrupts. This switches netfront to the same interrupt handling
that was done before multiqueue support was added.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
This is based on Linux commit 1f3c2eba1e2d866ef99bb9b10ade4096e3d7607c from
David Vrabel:
A full Rx ring only requires 1 MiB of memory. This is not enough memory
that it is useful to dynamically scale the number of Rx requests in the ring
based on traffic rates, because:
a) Even the full 1 MiB is a tiny fraction of a typically modern Linux
VM (for example, the AWS micro instance still has 1 GiB of memory).
b) Netfront would have used up to 1 MiB already even with moderate
data rates (there was no adjustment of target based on memory
pressure).
c) Small VMs are going to typically have one VCPU and hence only one
queue.
Keeping the ring full of Rx requests handles bursty traffic better than
trying to converge on an optimal number of requests to keep filled.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Currently FreeBSD is not properly fetching the TSO information from the Xen
PV ring, and thus the received packets didn't have all the necessary
information, like the segment size or even the TSO flag set.
Sponsored by: Citrix Systems R&D
* The "if (!data->valid_tx_ant || !data->valid_rx_ant) {" check was getting
triggered with a 3165 chipset.
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 3655dfb6fc311fc83e5ce8370dd91b4cd4a37991
Move some declarations to if_iwmreg.h.
Remove iwm_fw_alive(); just call iwm_post_alive() directly.
Simplify iwm_mvm_add_sta().
Return timeout error from iwm_apm_init().
Print a message when init (i.e. boot) firmware fails to load.
Remove some commented-out code which wouldn't compile anyway.
Move iwm_mvm_tx_fifo to if_iwmreg.h to match better where Linux puts it.
Taken-From: OpenBSD (if_iwm.c r1.80 and if_iwmreg.h r1.11)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 29fcb331e5620ae145a6ab9cdda830e22fff626a
This is the initial framework to call into the MCI HAL routines and drive
the basic state engine.
The MCI bluetooth coex model uses a command channel between wlan and
bluetooth, rather than a 2-wire or 3-wire signaling protocol to control things.
This means the wlan and bluetooth chip exchange a lot more information and
signaling, even at the per-packet level. The NICs in question can share
the input LNA and output PA on the die, so they absolutely can't stomp
on each other in a silly fashion. It also allows for the bluetooth side
to signal when profiles come and go, so the driver can take appropriate
control. There's also the possibility of dynamic bluetooth/wlan duty cycle
control which I haven't yet really played with.
It configures things up with a static "wlan wins everything" coexistence,
configures up the available 2GHz channel map for bluetooth, sets a static
duty cycle for bluetooth/wifi traffic priority and drives the basics needed to
keep the MCI HAL code happy.
It doesn't do any actual coexistence except to default to "wlan wins everything",
which at least demonstrates that things do indeed work. Bluetooth inquiry frames
still trump wifi (including beacons), so that demonstrates things really do
indeed seem to work.
Tested:
* AR9462 (WB222), STA mode + bt
* QCA9565 (WB335), STA mode + bt
TODO:
* .. the rest of coexistence. yes, bluetooth, not people. That stuff's hard.
* It doesn't do the initial BT side calibration, which requires a WLAN chip
reset. I'll fix up the reset path a bit more first before I enable that.
* The 1-ant and 2-ant configuration bits aren't being set correctly in
if_ath_btcoex.c - I'll dig into that and fix it in a subsequent commit.
* It's not enabled by default for WB222/WB225 even though I believe it now
can be - I'll chase that up in a subsequent commit.
Obtained from: Qualcomm Atheros, Linux ath9k
comp_handler_lock but c4iw_destroy_cq has already freed the CQ memory
(which is where the lock resides).
Submitted by: Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Do not set HWRTSEN bit when CTS-to-self is used; CTS2SELF bit triggers
CTS frame transmission by itself (and it does not work when HWRTSEN bit
is set).
Tested with:
* RTL8188CUS, HOSTAP mode (11g)
* RTL8188EU, STA mode (11g)
Receive all beacons in HOSTAP mode; they will give more information about
present non-ERP / legacy BSSs (used to choose protection mode).
Tested with RTL8188CUS (HOSTAP, urtwn) + RTL8821AU (HOSTAP, 11b mode).
This simplifies setting an initial interrupt moderation value, and
avoids most calls to evx_ev_qmoderate from contexts where MCDI is
not allowed (MCDI is need for an EVQ timer workaround in a later patch).
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6673
by default. This is a workaround for a too simplistic ICL module
choosing mechanism. To use it, specify offload in ctl.conf
or iscsi.conf.
This fixes a problem where "kldload cxgbei" wedges the iSCSI stack,
if you don't have a Chelsio card installed, or the endpoints of the
iSCSI session are not reachable through addresses configured
on that interface.
Reviewed by: np@
MFC after: 1 month
The buggy code was using the rxq index but should use the evq label
associated with the rxq. It was missed in r298735.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D6661
discovery without attaching to the targets ("iscsictl -Ad ... -e off"),
and then attach to selected ones ("iscsictl -Mi ... -e on").
PR: 204129
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6633
this to be the case. This will mean we don't try and handle the cache in
bus_dmamap_sync when it is not needed.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6605
- Avoid unnecessary indirection.
- Avoid bit fields.
- Use __packed.
Reviewed by: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6636
The legacy bits are just from ah.h; the MCI bits are from the ar9300
HAL "freebsd" extras.
A subsequent commit will include ah_btcoex.h into ah.h and remove
the older defintions.
While I'm here, prefix function names w/ vmbus, since unlike Hyper-V
timecounter, Hyper-V event timer will not work w/o vmbus.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6598
Some machine BIOSes use the I2C bus and leave it in a state that causes
interrupts to not work properly due to a pending interrupt having been
latched.
Refactor the code a bit to clear pending interrupts when I2C is enabled.
This fixes the primary problem.
Also fix a possible race condition in the interrupt handler where the
interrupt was being cleared after reading the status instead of before.
Reported by: pfg
Reviewed by: jhb
Approved by: jhb
Obtained from: DragonFly BSD
Differential Revision: https://reviews.freebsd.org/D6586
While I'm here remove the event timer's dependency on hv_vmbus_priv.h
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6574
- Make sure that STIMER0 is disabled before writting to it, since
writing to an enabled STIMER will result in undefined behaviour.
- It is unnecessary to reconfigure STIMER0 upon each et_start().
- Make sure that MSR_HV_REF_TIME_COUNT will not return 0, since
writing 0 to STIMER_COUNT will disable the target STIMER.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6573
When hwpmc stops sampling it will set the pm_state to something other
than PMC_STATE_RUNNING. This means the following sequence can happen:
CPU 0: Enter the interrupt handler
CPU 0: Set the thread TDP_CALLCHAIN pflag
CPU 1: Stop sampling
CPU 0: Call pmc_process_samples, sampling is stopped so clears ps_nsamples
CPU 0: Finishes interrupt processing with the TDP_CALLCHAIN flag set
CPU 0: Call pmc_capture_user_callchain to capture the user call chain
CPU 0: Find all the pmc sample are free so no call chains need to be captured
CPU 0: KASSERT because of this
This fixes the issue by checking if any of the samples have been stopped
and including this in te KASSERT.
PR: 204273
Reviewed by: bz, gnn
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6581
This is like the WB222 coexistence (ie, "MCI", a message bus inside the
chip), and it's currently a cut/paste so I can start using it to flesh
out the differences with WB222.
It doesn't completely /do/ bluetooth coexistence, because it turns out
I need to add some contigmalloc'ed buffers to the btcoex path for this
type of hardware. I'm putting this work in the "people would like
to see functioning-ish btcoex before FreeBSD-11" bucket because I see
this as "broken".
Tested:
* QCA9535 (WB335) NIC, BT + 2GHz STA
avoid panicking debug kernels.
t4_tom does not keep track of a connection once it switches to ULP mode
iWARP. If the connection falls out of ULP mode the driver/hardware seq#
etc. are out of sync. A better fix would be to figure out what the
current seq# are, update the driver's state, and perform all sanity
checks as usual.
This also prevents tracing to a P_INEXEC process since it could race
with other processes attaching to it in filemon_event_process_exec() due
to the filemon_get_proc() race of incrementing ref and then locking the
filemon. With the no-P_INEXEC invariant in place the p_filemon may only
be the same or NULL when trying to drop it in
filemon_event_process_exec().
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6545
If the parent is DEAD or connect_request_upcall() fails, the parent
mutex is left locked. This leads to a hang when process_mpa_request()
is called again for another child of the listening endpoint.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Obtained from: upstream iw_cxgb4
Sponsored by: Chelsio Communications
wrap the implementation so that it returns an error if INTRNG support is
not available. It should be possible to write a non-INTRNG implementation
of this function some day. In the meantime, there is code that contains
calls to this function (so the decl is needed), but have runtime checks to
avoid calling it in the non-INTRNG case.
Use for forever loop instead of while.
Found by lint on illumos.
Submitted by: Garrett D'Amore <garrett at damore.org>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
if_iwm - GC some dead code, left by a partially applied OpenBSD change.
Taken-From: OpenBSD (if_iwm.c r1.69)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD git 07dfed32ea39b980b0b80d27ff938e7c3ca4c0b5
This will be more accurate as the actual name is provided if ran
from an absolute path in do_execve().
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Pressing the PEK (power enable key) will shutdown the board.
Some events are reported to devd via system "PMU" and subsystem
"Battery", "AC" and "USB" such as connected/disconnected.
Some sensors values (power source voltage/current) are reported via
sysctl (dev.axp209_pmu.X.)
It also expose a gpioc node usable in kernel and userland. Only 3 of
the 4 GPIO are exposed (The GPIO3 is different and mostly unused on
boards). Most popular boards uses GPIO1 as a sense pin for OTG power.
Add a dtsi file that adds gpio-controller capability to the device as
upstream doesn't defined it and include it in our custom DTS.
Reviewed by: jmcneill
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D6135
- Use device's channel list instead of default one (adds 12, 13 and 14
2GHz channels).
- Add ic_getradiocaps() method.
Differential Revision: https://reviews.freebsd.org/D6171
- Use device's channel list instead of default one (+ 12, 13 and 14
2GHz channels).
- Add ic_getradiocaps() method.
Differential Revision: https://reviews.freebsd.org/D6170
- Use device's channel list instead of default one (from
ieee80211_init_channels()).
- Add ic_getradiocaps() method.
Differential Revision: https://reviews.freebsd.org/D6144
- Use macros to define rate indices; don't hardcode them in code.
- Add method for 'rate' -> 'rate index' conversion
(and array for the opposite).
- Determine if rate is CCK / OFDM via appropriate macro.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D4837
Previously the USB PHY driver would enable all regulators at attach time.
This prevented boards from booting when powered by the USB OTG port, as
it didn't take VBUS presence into consideration.
in ICL interface.
- the ordering of parameters to icl_conn_task_setup is different, so that
the "cookie" is last.
- the icl_conn_connected() method is gone, replaced by much simpler mechanism.
I'd rather keep the ICL interface as small as possible.
- I don't really like the s/offload/driver/g. The "tcp" is not a driver;
"iser" is not really a driver either. I'd prefer to leave it as it is.
- the check for ic_session_type_discovery() in iser_conn_handoff() is gone,
as handoff cannot happen for discovery sessions.
- ic_session_login_phase() and ic_session_type_discovery() are gone. If you
had your handoff method called - you're no longer in either of those.
- the way maxtags is passed is different; now it's simply ic->ic_maxtags.
It's cleaner, and the old way would cause weird things to happen if
fail_on_disconnection=1 and the user changed the maxtags sysctl before
reconnecting (basically the CAM idea of maxtags would be different from
iSER one).
- icl_hba_misc() is gone; declare support for PIM_UNMAPPED by setting
ic->ic_unmapped flag.
- the way we find the "iser" ICL module is rewritten - we have a flag
for icl_register() that says if the module is iSER-capable or not.
- icl_conn_release() is gone; iser_conn_release() is called from
iser_conn_free() (no functional change in this case) and at the beginning
of icl_conn_connect(), to handle reconnection.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
written by Sagi Grimberg <sagig at mellanox.com> and Max Gurtovoy
<maxg at mellanox.com>.
This code comes from https://github.com/sagigrimberg/iser-freebsd, branch
iser-rebase-11-current-r291993. It's not connected to the build just yet;
it still needs some tweaks to adapt to my changes to iSCSI infrastructure.
Big thanks to Mellanox for their support for FreeBSD!
Obtained from: Mellanox Technologies
MFC after: 1 month
Relnotes: yes
This is a simple ioctl and mmap API to issue SPI transactions from
userland. It's useful for simple devices (eg spi temperature sensors,
etc) for experimentation.
TODO:
* Write some documentation!
Submitted by: green
This was triggering a panic on detach; the SPROM shadow is now
maintained by the bhnd_sprom_chipc driver, and should be removed
from chipc.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6548
This adds support for automatically configuring bhnd_chipc bus children
with associated resources, using an internal 'hints' table based directly
on Michael Zhilin's chipc resource mapping work.
The bhnd_sprom_chipc driver has been converted to use DEVICE_IDENTIFY()
with the new resource table.
This should be nearly drop-in compatible with the child device drivers
in D6250.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6525
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Currently all radiotap structures in ral(4) are packed, but are not
aligned, which causes ral based devices to crash when one does
'ifconfig wlan0 up' for a wlan interface with a ral wlandev on arches
that care about structure alignment (e.g., MIPS).
Adding an aligned attribute helps fix this problem and ral devices
can be properly brought up.
Reviewed by: adrian
Sponsored by: Smartcom - Bulgaria AD
And release IDT vector before releasing ISR resources on interrupt
teardown path. We still have some work to do on the interrupt tearing
down path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6519
Though it is highly unlikely this function would fail w/ BUS_DMA_WAITOK,
we had better to check its return value; better safe then sorry here.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6518
This was found while reworking the device tree nodes for dtsec to match the
Linux device tree. Instead of waiting and expecting later code to call
dpaa_portal_map_registers(), do the equivalent immediately upon mapping.
Otherwise, it's possible to access the pages before that function is called, and
hang the CPU.
This unifies handling of core, chip, and board-level device
matching, and adds support for matching device drivers
against the bus attach type (e.g. SoC vs WiFi adapter).
Core-level quirks on Broadcom's chipsets generally are specific
to some combination of chip model, core revision, chip
package (e.g. 12x9 SMT package), SROM revision, etc.
Unifying the match APIs for all three attribute types (core, chip,
board/srom) allows defining a single device quirk table that
matches across all of those attributes.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6515
than sc->areq. This is a bounds check to ensure we're not just cramming
arbitrarily sized nonsense into the driver and overflowing the heap.
PR: 209545
Submitted by: cturt@hardenedbsd.org
MFC after: 2 weeks
Option EFSYS_OPT_ALLOW_UNCONFIGURED_NIC disables check that the adapter
MAC address is not a local address (beginning 02).
Submitted by: Laurence Evans <levans at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6508
And
- Move message and event flags to vmbus_softc per-cpu data.
- Get rid of hv_setup_arg, which serves no purpose now.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6502
* convert phy_getinfo() to take a "gmode" flag, rather than the siba
TGSHIGH flags and then check for 2GHz. This should ensure that
gmode is set correctly even on DUALPHY NICs.
* move the siba_powerup() call and the TGSHIGH decoding into a
call to bwn_is_bus_siba(), and return an error if it's called
on anything else. We don't yet do anything else, but when we do..
Tested:
* BCM4322, 11a STA
This is all for the bhnd(4) work in progress. It's enough to probe/attach
all the bhnd internals, but we're missing OTP support and some cleanup
code. And, well, all the rest of the bhnd(4) migration.
So no, this won't give you BCM43225 support. Sorry!
This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of
bhnd_chipc that rely on access to a subset of the device register space
that bhnd_chipc itself must also allocate.
We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY
wasn't limited to use with allocations at the same size/offset.
As a work-around, I implemented something similar to vga_pci.c, which
implements similar reference counting of of PCI BAR resources for its
children.
With these changes, chipc will use reference counting of SYS_RES_MEMORY
allocation/activation requests, to decide when to allocate/activate/
deactivate/release resources from the parent bhnd(4) bus.
The requesting child device is allocated a new resource from chipc's
rman, pointing to (possibly a subregion of) the refcounted bhnd resources
allocated by chipc.
Other resource types are just passed directly to the parent bhnd bus;
RF_SHAREABLE works just fine with IRQs.
I also lifted the SPROM device code out into a common driver, since this
now allows me to hang simple subclasses off of a common driver off of both
bhndb_pci and bhnd_chipc.
Tested:
* (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still
attaches and can be queried.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: mizkha@gmail.com
Differential Revision: https://reviews.freebsd.org/D6471
The EFSYS_PREEMPT_DISABLE() and EFSYS_PREEMPT_ENABLE() macros
were used to ensure correct timing of I2C operations. The APIs
for I2C operations have been removed, so these macros have no
callers.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
It does not belong to the vmbus.
While I'm here rework the Hypercall setup, e.g. use busdma(9)
and avoid bit fields.
Discussed with: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6445
The variable "size" stores number of words (4bytes). But the loop over
memory uses size as number of bytes to scan memory. As result it fetches
only 1/4th of memory.
This patch solves this problem and nvram2env fetches all NVRAM variables.
Test plan:
Pre-requisites: any MIPS board with ASCII-based NVRAM mapped into memory
* Add "device nvram2env" into kernel configuration
* Specify hints: base is mandatory (according to nvram2env(4))
hint.nvram.0.base=0x1c7f8000 (it's valid address for Asus RT-N53 with
flags = 0x4)
* Build & load kernel with bootverbose
Actual result: only part of nvram variables are found
Expected result: all variables are found
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6466
This adds a BHND_BUS_GET_ATTACH_TYPE(); the primary use-case is to let
chipc make a coarse-grained determination as to whether UART, SPI, etc
drivers ought to be attached, and on fullmac devices, whether a real
CPU driver ought to be skipped for the ARM core, etc.
Tested:
* BCM4331 (BHND)
* BCM4312 (SIBA)
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6492
Override global retry limit (which is set in R92C_RL) via per-frame
TX descriptor field. Obsoletes D3840 (should work better with 2+ vaps).
Tested with RTL8188EU and RTL8192CUS in STA mode (maxretry = [3-9]).
After r285994, sysctl(8) was fixed to use 273.15 instead of 273.20 as 0C
reference and as result, the temperature read in sysctl(8) now exibits a
+0.1C difference.
This commit fix the kernel references to match the reference value used in
sysctl(8) after r285994.
Sponsored by: Rubicon Communications (Netgate)
The GPIO hardware should not be owned by a single device, this defeats any
chance of use of the GPIO controller as an interrupt source.
ow(4) is now the only consumer of this 'feature' before we can remove it
for good.
Discussed with: ian, bsdimp
Fix panics which were present when BGX and PF module were unloaded.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6346
Add directory structure and fix dependencies to be able to
build and use Cavium VNIC driver as a module.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6345
utilizing previously unused arg field of struct ccb_notify_acknowledge.
This makes new QUERY TASK, QUERY TASK SET and QUERY ASYNC EVENT requests
really functional for CAM target mode drivers.
tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
Store the last doorbell write in the mlx5e_sq structure and write the
doorbell to the hardware when the transmit routine finishes
transmitting all queued mbufs.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
This patch implements a sysctl which allows setting a factor, N, for
how many work queue elements can be generated before requiring a
completion event. When a completion event happens the code simulates N
completion events instead of only one. When draining a transmit queue,
N-1 NOPs are transmitted at most, to force generation of the final
completion event. Further a timer is running every HZ ticks to flush
any remaining data off the transmit queue when the tx_completion_fact
> 1.
The goal of this feature is to reduce the PCI bandwidth needed when
transmitting data.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
Also check the return value of copyin(9) to prevent unnecessary allocation in the failure case.
Submitted by: ngie
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5155
This patch introduces support of BHND on SoC: nexus-to-bhnd drivers.
bhnd_soc is attached under nexus and responsible for all BHND-style calls
from bhnd(4) bus to parents.
bcma_nexus is bhnd(4) bus, attached to bhnd_soc and implement all
nexus-style behaviour of BHND.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Reviewed by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6248
Adds support for adjusting active bus resource allocations, limiting the
range to the constraints of the register window within which the resource
is mapped.
This is the final set of bhnd changes required to support delegating
ChipCommon's register space to child devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6470
This adds bhnd-compatible implementations of bus_(read|write|set)_(1|2|4) APIs,
and upgrades the SPROM parsing code to use bhnd_bus_read_region_stream_2().
This a precursor to bridge support for resource adjustment and the new
ChipCommon bus support.
Tested:
* Tested against BCM4331
* Kernel build verified via tinderbox.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6469
- Add a pcib_detach() function for the PCI-PCI bridge driver. It
tears down the NEW_PCIB and hotplug state including destroying
resource managers, deleting child devices, and disabling hotplug
events.
- Add a detach method to the ACPI PCI-PCI bridge driver which calls
pcib_detach() and then frees the copy of the _PRT interrupt routing
table.
- Add a detach method to the PCI-Cardbus bridge driver which frees
the PCI bus resources in addition to calling cbb_detach().
- Explicitly clear any pending hotplug events during attach to ensure
future events will generate an interrupt.
- If a the Command Completed bit is set in the slot status register
when the command completion timeout fires, treat it as if the
command completed and the completion interrupt was just lost rather
than forcing a detach.
- Don't wait for a Command Completed notification if Command Completion
interrupts are disabled. The spec explicitly says no interrupt is
enabled when clearing CCIE, and on my T400 no interrupt is generated
when CCIE is changed from cleared to set, either. In addition, the
T400 doesn't appear to set the Command Completed bit in the cases
where it doesn't generate an interrupt, so don't schedule the timer
either. (If the CC bit were always set, one could always set the timer
and rely on the logic of treating CC set as a missed interrupt.)
Reviewed by: imp (older version)
Differential Revision: https://reviews.freebsd.org/D6424
Split getchannels() method in ath_hal/ah_regdomain.c into a subset
of functions for better readability.
Note: due to different internal structure, it cannot use
ieee80211_add_channel*() (however, some parts are done in a
similar manner).
Differential Revision: https://reviews.freebsd.org/D6139
This code was originally implemented 7 years ago, but never really worked
due to trivial error. I think this functionality may be not required.
Initiators supporting optional periodic command status checks detected
those terminated commands and retried them 3 seconds later. But thinking
about less featured initiators and the fact that it is our race makes
virtual ports "unknown" it may be good to have this feature.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
That pops up in the rev 5xx / 6xx microcode on the later cores
(4312, 4322.) I'm not sure why this is happening yet and I'll
dig into it, but Linux b43 does the same thing.
* PMU controls the clock setup
* Correctly set idle low power handling
* Use a hard-coded powerup delay for some of the newer hardware
(including the BCM4322, which I've tested with.)
Tested:
* BCM4322, 2G + 5G STA mode
Obtained from: Linux b43 (PMU behaviour)
I transcribed the linux ssb offsets and .. didn't pick up that our SIBA
SPROM code has an offset of 0x1000.
This fixes a bunch of odd parsing values that showed up when I tried
using a newer NIC. The NIC still doesn't yet work but now the SPROM
values are right.
Oops!
* Add the new TX/RX frame formats;
* Use the right TX/RX format based on the frame info;
* Disable the 5xx firmware check, since now it should
somewhat work (but note, we don't yet use it unless
you manually add ucode11/initvals11 from the 5.x driver
to bwn-kmod-firmware;
* Misc: update some comments/debugging now I know what's
actually going on.
Tested:
* BCM4321MC, STA mode, both 4xx and 666 firmware, DMA mode
TODO:
* The newer firmware ends up logging "warn: firmware state (0)";
not sure yet what's going on there. But, yes, it still works.
I'm committing this via a BCM4321MC, 11a station, firmware
rev 666.
Obtained from: Linux b43 (TX/RX descriptor format for 5xx)
Greatly reduce the locked instructions and reduce number of inner loops.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6404
Use vmbus softc to save vmbus per-cpu data. More stuffs will be moved
into vmbus softc.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6403
And move base channel id calculation out of inner loop. This prepares
for more event processing optimization.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6384
* always allocate maximum size txhdr entries
* set the right rx header offset/framesize based on firmware
This still isn't what's completely required for fw 598 support; there's
more to come.
Tested:
* Apple BCM94321MC 11abgn NIC, 11a STA mode, firmware version 4xx.
Obtained from: DragonflyBSD (txhdr entry sizing), fw 598 RX header size (linux b43)
Previously the command completion interrupt would post any pending
command immediately before pcib_pcie_hotplug_update() had been
run to inspect the current status. Now, the command completion
interrupt merely clears the flag and stops the timer assuming that
the caller is always going to call pcib_pcie_hotplug_update() to
generate the next hotplug command if one is needed.
While here, fix a bug for systems with command completion where the
old (existing) value was written to the slot control register instead
of the new value. This fixes the complaint about a missing hotplug
interrupt on my T400.
Differential Revision: https://reviews.freebsd.org/D6363
If platform support EXT_RESOURCES, clocks and resets are handled out of
the box.
If not driver can be subclassed using the generic_usb interface.
generic_usb name was choosed because at one point I'll add generic-ehci
FDT driver.
Reviewed by: jmcneill, hselasky
Approved by: andrew (mentor)
Differential Revision: https://reviews.freebsd.org/D5481
It is normal for ZOMBIE ports to be logged out. This status is not really
an error until Gone Device Timeout expires, so make CAM retry after delay.
MFC after: 1 week
Firmware automatically logs in only to local loop ports, and those ports
can be easily identified without extra flag by zero domain and area IDs.
MFC after: 1 week
method. This is required for upcoming iSER support.
Obtained from: Mellanox Technologies (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Now that we've got access to SPROM and can access board identification,
this implements all known remaining hardware work-arounds for the bhnd(4)
PCI and PCIe-G1 cores operating endpoint mode.
Additionally, this adds an initial set of skeleton PCIe-G2 hostb and pcib
drivers, required by fullmac and newer softmac devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6377
Fix issues that crept in with initial import.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6393
Fix efx_mcdi_request_poll so it only raises an exception if EIO is
reported from a detected MC assert or reboot. This prevents
an unnecessary exception being raised if an MCDI response error code
is trandlated to EIO.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6392
The event/timer block used sysclk in Huntington, but has been
moved to the dpcpu clock domain for Medford. Fix the computed
timer quantum to use the right clock.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6389
This allows the driver to fall back to the largest usable MTU if a
user attempts to configure an unprivileged function with an MTU higher
than that of the attached port.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6387
Check licensing support at NIC startup to avoid multiple checks later.
As state is stored, licensing initialisation is moved later in start
procedure.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6385
Centralizes fetching of board information (vendor, type, revision, etc),
and adds support for matching quirks against board identification info.
* Adds a BHND_BUS_READ_BOARD_INFO(), allowing bhnd bus/bus parent(s) to
handle implementation-specific fetching of board info.
* Integrates board type constants from the latest Broadcom ISC-licensed
bcmdevs.h included in dd-wrt's Broadcom driver source drops.
* Adds support for matching on chip/board quirks to bhnd_device_quirks()/
bhnd_chip_quirks().
* Use the new board/chip quirk matching to match Apple devices that failed
to set BFL2_PCIEWAR_OVR in SROM.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6361
There are 5 logging levels:
* ERROR
* WARN
* INFO
* DEBUG
* TRACE
There are 2 logging context:
* with
* without device
DEBUG and TRACE records are printed only if bootverbose.
Logging records are printed with source code line information if acceptable
logging level is DEBUG or TRACE.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6247
Extend macros for MIPS & ARM cores. Now only BCM cores can be matched by matching mechanism.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6246
This is an updated version of D6140.
Tested:
* BCM4321 11abgn, STA mode (11a)
Submitted by: avos
Differential Revision: https://reviews.freebsd.org/D6140
Some ACPI operations such as mutex acquires and event waits accept a
timeout. The ACPI OSD layer implements these timeouts by using regular
sleep timeouts. However, this doesn't work during early boot before
event timers are setup. Instead, use polling combined with DELAY()
to spin.
This fixes booting on upcoming Intel systems with Kaby Lake processors.
Tested by: "Jeffrey E Pieper" <jeffrey.e.pieper@intel.com>
Reviewed by: jimharris
MFC after: 1 week
* DUALPHY in TGSHIGH tells us there's a phy that is dualband, rather than
two separate PHYs/MACs (which we almost but don't quite yet support.)
Use it.
* Add the BCM4322 PCI ID to the list of devices we don't override.
This means the 2g/5g flags are preserved, and thus we get 5GHz
operation (with N-PHY, of course.)
Tested:
* BCM4311, STA mode (11bg)
* BCM4312, STA mode (11bg)
* BCM4321, STA mode (11abg)
Sponsored by: Palm Springs
* unbreak non-debug builds - don't default to debugging SCAN; that was
left-over from my testing.
* include opt_siba.h, now that it's generated as appropriate.
* stick the debug enum outside the debug block, just so it's there for
any code that wants to set siba_debug for some reason (like say,
my debugging muckup.)
* make DPRINTF() use __VA_ARGS__ for formatting too, so it correctly
handles printing w/ no args.
* Make DPRINTF() use device_printf().
Sponsored by: Palm Springs
Coverity reports an uninitialized "dir" in case the switch defaults
without hitting any case. Respect the original intent and quell the
false positive with the relatively new __unreachable() builtin.
CID: 1331566
translate the pci rid to a controller ID. The translation could be based
on the 'msi-map' OFW property, a similar ACPI option, or hard-coded for
hardware lacking the above options.
Reviewed by: wma
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Add a new get_id interface to pci and pcib. This will allow us to both
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone (previous version)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
This is needed because the new MCDI command nvram_private_append can
return MC_CMD_ERR_EEXIST
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Report the full error descriptor in a form that can be passed to
firmwaresrc/dpcpu/scripts/evdecode
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Length consistency checks were failing for ECC hashes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
This revision introduces basic support for the internal ESW switch found
Ralink/Mediatek SoCs such as RT3050, RT3352, RT5350, MT7628; and GSW
found in MT7620 and MT7621.
It only supports 802.1q VLANs and doesn't support external PHYs at the
moment (only the ones that are built into the switch itself).
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6348
Increase buffer sizes for license keys to 160 bytes to accomodate ECDSA
hashes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Implementation of the MCDI commands for Siena boards was requesting
the wrong operation.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6370
Perform a more accurate check of whether the PCIe bandwidth is
sufficient for the current/supported port modes.
Give a different warning if there is sufficient bandwidth to achieve
line rate, but the link is not fast enough for optimal latency.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6369
Find end of segments in a more direct way that avoids an error report at
the terminator.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6367
A lookup on a VPD entry which is missing reports several failure
messages as it propagates through wrapper functions. Restructured
the wrappers to treat this gracefully as an expected case.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6366
Silent handling of failure to invoke functions that are not supported on
older licensing versions.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6365
Create separate implementations of the efx_lic API for each revision of
the licensing system. All processing of the V1/V2 license partition is
moved to efx_lic, and an implementation of V3 licensing uses the existing
TLV functions with extensions for writing new TLV entries.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6364
For channel0, it will never be processed on event handling path,
so there is no need to install it. After skipping in the channel0
installation, we could discard the channel0 check on event
handling hot code path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6333
I've submitted an alternative proposal to -core about just importing
the (converted) GPL PHY code in an alternate directory under sys/gnu/
so I don't have to rewrite it all to be BSD licenced.
N-PHY and later require a lot more plcp specific setup for the PHY
to know what to transmit. I've been spoilt by the atheros, intel
and realtek parts where you don't have to hand-assemble the PLCP
but .. well, apparently Broadcom require a lot more work.
This, and PHY-N itself, was the last major missing bit to get 11a
OFDM transmit to work. Without this, CCK transmit worked but
OFDM transmit would always fail (with stat.phy_err set to 0x80.)
I have no idea what 0x80 is, and I went mad reading the broadcom
vendor driver to try and figure it out.
Tested:
* BCM4312 (PHY-LP)
* BCM4321 (PHY-N), 11a, 11bg.
Set phy-full-init always to 1 for now; PHY-N supports being able to do
partial init for things like fast channel changes but I'm going to
ignore it all.
This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.
* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.
* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.
Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
* Log the per-completion status out if requested
* If we get a PHY failure, the retrycnt is set to 0 and ack=0, so
the logic was incorrect. So, for ack=0, ensure we don't log
a retrycnt of 0 (or rate control breaks) or a negative retrycnt
(or rate control also breaks.)
Tested:
* BCM4321 (11abgn N-PHY), BCM4312 (LP-PHY)
* Ensure we set 20MHz wide channels (hard-coded) for PHY-N.
* Change the core rese tto take a flag saying "gmode" vesus uint32_t
flags. This is important for BCMA support where the "gmode" bit
is different.
* Refactor out the mac-phy clock reset routine (usde by PHY-N).
Tested:
* BCM4321 (PHY-N), BCM4312 (PHY-LP)
TODO:
* Checkpoint test on PHY-G hardware, just to check.
This isn't compiled in yet; so some code here duplicates what
is in the existing code. I'll migrate it all out in subsequent
commits.
Obtained from: b43 (definitions), bcm-v4 specifications website
This will eventually live in sys/dev/bhnd/, but I won't use that until
we migrate the whole driver over.
So, this'll live here for now.
Obtained from: Linux b43 (definitions)
bwn_sqrt() is in the PHY-LP code but is also needed by the upcoming
PHY-N support.
The other two routines are used by the PHY-N code.
The next commit will introduce it into the compile and pull bwn_sqrt()
out of the PHY-LP source.
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
Since r276367 added the virtio_mmio support vtnet_modevent() gets called twice.
This resulted in a memory leak during load and a panic on unload.
Count the loads so we only initialise once (just like cxgbe(4)), and only clean
up in the final unload.
PR: 209428
Submitted by: novel@FreeBSD.org
MFC after: 1 week
Move legacy privilege masks near to their only user.
Move Huntington definitions to the top of hunt_impl.h to prepare
for moving the remaining EF10 definitions to ef10_impl.h.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6343
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6342
