is_completion_pending governs whether or not a callout will be scheduled
when new work is queued on the IOAT device. If true, a callout is
already scheduled, so we do not need a new one. If false, we schedule
one and set it true. Because resetting the hardware completed all
outstanding work but failed to clear is_completion_pending, no new
callout could be scheduled after a reset with pending work.
This resulted in a driver hang for polled-only work.
configuring of EP0 and non-EP0 into xhci_cmd_evaluate_ctx() and
xhci_cmd_configure_ep() respectivly. This resolves some errors when
using XHCI under QEMU and gets is more in line with the XHCI
specification.
PR: 212021
MFC after: 1 week
And don't recreate chimney sending buffer for each primary channel
open, it is now created in device_attach DEVMETHOD and destroyed
in device_detach DEVMETHOD.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7574
It seems Killer E2200/E2400 has a BIOS misconfiguration or silicon
bug which triggers DMA write errors when driver uses advertised
maximum payload size. Force the maximum payload size to 128 bytes
in DMA configuration.
This change should fix occasional DMA write errors reported on
Killer E2200.
Tested by: <psy0nic@sys-tek.org>
controllers. For Gigabit Ethernet version of AR816x, AR813x/AR815x
except L1D controller, use vendor recommended ASPM parameters.
While here, increase alc_dma_burst array size. Broken H/W can
return bogus value in theory.
so they are memory independent which allows for handling panics
triggered by the keyboard driver itself, typically via CTRL+ALT+ESC
sequences. Or if the USB keyboard driver was processing a key at the
moment of panic. Allow UKBD to be attached while keyboard polling is active.
Tested by: Bruce Evans <bde@freebsd.org>
MFC after: 1 week
everything was broken. The cases that I noticed were Ctrl-PrintScreen
not being mapped to the virtual scancode 0x5c (debug) and Pause not being
mapped to the physical/virtual scancode 0x46 (slock).
These keys are the most complicated ones due to kludges to give some
compatibility back to before AT keyboards.
Alt-PrintScreen must pretend to be a separate key from PrintScreen
even at the "raw" level. The (unique) usb code for it is 0x8a and we
just have to map this to our unique virtual scancode 0x54, but we
mapped it first to the internal code 0x7e and then to 0x79 which is a
key on the Japanese 106/109 keyboard. This fix is under the
UKBD_EMULATE_ATASCANCODE option which shouldn't be used for non-AT
keyboards. If it is, then the syscons Japanese keymaps have nothing
of importance for code 0x79 and can easily be changed. 0x54 is also
unimportant in Japanese and US keymaps.
NonAlt-PrintScreen and NonCtl-Pause/Break had many much larger bugs with
smaller compatibility problems from fixing them. The details are too
ugly to give here. Summary of the changed (hex) codes:
K_RAW PrintScreen (Ctl, Shift, Ctl-Shift): E0-2A-E0-37 -> E0-37
K_RAW Alt-PrintScreen (all shift states): 79 -> 54
K_RAW Pause/Break (unshifted, Shift, Alt, Alt-Shift)): E0-46 -> E1-1D-45
K_CODE ALT-PrintScreen (all shift states): 79 -> 54
That is 15 of 32 shift combinations for 2 keys fixed, with 8 easy cases
from the 79 -> 54 remapping.
The difference is only large and with no workaround using a keymap for
for K_RAW, but this affects other modes when ukbd is layered under kbmux
because kbmux keeps all subdevices in K_RAW mode and translates. Oops.
I used kbdmux to generate the above table of changes.
This driver only supports 10Mb Ethernet using PIO (the hardware supports
DMA, but the driver only does PIO). There are not any PCCard adapters
supported by this driver, only ISA cards. In addition, it does not use
bus_space but instead uses bcopy with volatile pointers triggering a
host of warnings. (if_ie.c is one of 3 files always built with
-Wno-error)
Relnotes: yes
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses. This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual(). It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.
Relnotes: yes
This permits a single early return for VF devices in the routines that
add sysctl nodes.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7512
Specifically, the FW_PORT_CMD may or may not work for a VF (the PF
driver can choose whether or not to permit access to this command),
so don't attempt to fetch port information on a VF if permission is
denied by the PF.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7511
While here, mark which parameters are PF-specific and which are
VF-specific.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7508
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
And don't recreate RXBUF for each primary channel open, it is now
created in device_attach DEVMETHOD and destroyed in device_detach
DEVMETHOD.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7556
On the first switch we previously released the newly allocated keyboard
instead of the old one. Keyboard state was very confused afterwards for
further keyboard switches.
Submitted by: bde
axge_setmulti()/axge_setpromisc() with axge_rxfilter().
Multicast filter programming and promiscuous mode requires
access to a common RX configuration register so there is no need to
use separate functions with added complexity. axge_rxfilter() does
not read back AXGE_RCR register since accessing a register in USB
is too slow and we already have all knowledge of required
configuration. Rebuilding RX filter configuration is simpler and
faster than manipulating every bits after reading back the
register.
Note, axge_rxfilter() does not set RCR_IPE(IP header alignment on
32bit boundary) to disable extra padding bytes insertion. The
extra padding wastes ethernet to USB host bandwidth as well as
complicating RX handling logic. Current USB framework requires
copying RX frames to mbufs so there is no need to worry about
alignment. Previously axge_rx_frame() performed wrong bound check
due to the extra padding and it was broken when RX checksum
offloading is disabled. See added comment in axge_rx_frame () for
actual RX packet layout.
In axge_init(), disable WOL. It's meaningless to enable WOL in
normal operation.
In axge_rxeof(), use properly sized mbuf rather than blindly
allocating a mbuf cluster.
Use RX H/W checksum offloading only when administrator requested RX
checksum offloading. Previously it always used RX H/W checksum
offloading result regardless of RX checksum offloading state.
Separate L4 checksum offloading validation from L3 one and properly
set required offloading bits for each layer. This is to fix setting
L4 checksum offloading bits for L3 packets.
There are still lots of RX errors(probably RX FIFO overflows) under
moderate load. Users are strongly recommended to enable ethernet
flow control.
Reviewed by: kevlo (initial version), hselasky
This paves to nuke netvsc_packet, which does not serves much
purpose now.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7541
structures. This simplifies mbuf copy operation to USB buffers as
well as improving readability. The controller supports Microsoft
LSOv1(aka TSO) but this change set does not include the support due
to copying overhead to USB buffers and large amount of memory waste.
Remove useless ZLP padding which seems to come from Linux. Required
bits the code tried to set was not copied into USB buffer so it had
no effect. Unlike Linux, FreeBSD USB stack automatically generates
ZLP so no explicit padding is required in driver.[1]
Micro-optimize updating IFCOUNTER_OPACKETS counter by moving it out
of TX loop since updating counter is not cheap operation as it did
long time ago and we already know how many number of packets were
queued after exiting the loop.
While here, fix a checksum offloading bug which will happen when
upper stack computes checksum while H/W checksum offloading is
active. The controller should be notified to not recompute the
checksum in this case.
Reviewed by: kevlo (initial version), hselasky
Pointed out by: hselasky [1]
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
time, by, by default disallow writes to the mmaped HPET pages.
Intent is to allow userspace to use HPET as fast (i.e. no-syscall)
timecounter for gettimeofday(2). Unfortunately, the permission model
does not make it possible to safely unhide /dev/hpet in the jails even
if default mode is set to 0444, because untrusted jailed root may
change device permissions to writeable.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
SRB status is set to 0x20 by the hypervisor, if the specified LUN is
unaccessible, and even worse the INQUIRY response will not be set by
the hypervisor at all under this situation. Additionally, SRB status
is 0x20 too, for TUR on an unaccessible LUN.
Deliver CAM_SEL_TIMEOUT to CAM upon SRB status errors as suggested by
Scott Long, other values seems improper.
This commit fixes the Hyper-V disk hotplug support.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7521
Some devices report that they have an MRL when they actually
do not. Since they always report that the MRL is open, child
devices would be ignored. Try to detect these devices and
ignore their claim of HotPlug support. Specifically,
if there is an open MRL but the Data Link Layer is active,
the MRL is not real.
Revert r303645 to re-enable HotPlug support for slots with
power controllers, since it works correctly in my testing.
Start the DLL state-change timer if Presence /or/ MRL state changes,
along with other conditions. Previously, we started the timer iff
Presence changed. If there is an MRL, it must be closed for power
to be turned on, so Presence is unlikely to change on an MRL-close event.
Add a printf() of interesting registers on HotPlug interrupts and
commands (one from erj@). These were very useful for debugging.
Guard them with bootverbose, since they're spam in normal operation.
In collaboration with: jhb
Reviewed by: jhb
MFC after: 1 day
Relnotes: yes (re-enable HotPlug support for slots with power controllers)
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7509
- Added a generic bhnd_nvram_parser API, with support for the TLV format
used on WGT634U devices, the standard BCM NVRAM format used on most
modern devices, and the "board text file" format used on some hardware
to supply external NVRAM data at runtime (e.g. via an EFI variable).
- Extended the bhnd_bus_if and bhnd_nvram_if interfaces to support both
string-based and primitive data type variable access, required for
common behavior across both SPROM and NVRAM data sources.
- Extended the existing SPROM implementation to support the new
string-based NVRAM APIs.
- Added an abstract bhnd_nvram driver, implementing the bhnd_nvram_if
atop the bhnd_nvram_parser API.
- Added a CFE-based bhnd_nvram driver to provide read-only access to
NVRAM data on MIPS SoCs, pending implementation of a flash-aware
bhnd_nvram driver.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7489
This replaces the bitfield representation of the bhndb register window
freelist with the bitstring API, eliminating a dependency on
(MIPS-unsupported) __builtin_ctz().
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7495
Avoid unnecessary message type setting and centralize the send context
to transaction id cast.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7500
This is a driver for a pre-ATAPI ISA CD-ROM adapter. As noted in
the manpage, this driver is only useful as a backend to cdcontrol to
play audio CDs since it doesn't use DMA, so its data performance is
"abysmal" (and that was true in the mid 90's).
close functions. Scattered calls to sc_cnputc() and sc_cngetc() were
broken by turning the semi-reentrant inline context-switching code in
these functions into the grabbing functions. cncheckc() calls for
panic dumps are the main broken case. The grabbing functions have
special behaviour (mainly screen switching in sc_cngrab()) which makes
them unsuitable as replacements for the inline code.
Simply change the mode to K_XLATE using a local variable and use the
grab level as a flag to tell screen switches not to change it again,
so that we don't need to switch scp->kbd_mode. We did the latter,
but didn't have the complications to update the keyboard mode switch
for every screen switch. sc->kbd_mode remains at its user setting
for all scp's and ungrabbing restores to it.
- Add handling of VF register sets to t4_get_regs_len() and t4_get_regs().
- While here, use t4_get_regs_len() in the ioctl handler for regdump
instead of inlining it.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7484
- Use alternate register locations for the data and control registers for
VFs.
- Do a dummy read to force the writes to the mailbox data registers to
post before the write to the control register on VFs.
- Do not check the PCI-e firmware register for errors on VFs.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7483
Add fields to hold the SGE control register and free list buffer sizes to
the sge_params structure. Populate these new fields in
t4_init_sge_params() for PF devices and change t4_read_chip_settings() to
pull these values out of the params structure instead of reading
registers directly. This will permit t4_read_chip_settings() to be reused
for VF devices which cannot read SGE registers directly.
While here, move the call to t4_init_sge_params() to
get_params__post_init(). The VF driver will populate the SGE parameters
structure via a different method before calling t4_read_chip_settings().
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7476
Like scr_lock, the grab count needs to be per-physical-device to work.
This bug corrupted the grab count on both vtys if the ungrabbed vty is
different from the console, and failed to restore the keyboard state
on the ungrabbed vty, but not restoring it usually left the keyboard
mode part of the keyboard state uncorrupted at 1 (K_XLATE), while
after this fix the keyboard mode part is usually corrupted to 0 (K_RAW).
While here, rename the grab count from grabbed to grab_level.
This bug corrupted the grab count on both vtys if the ungrabbed vty is
different from the console, and failed to restore the keyboard state
on the ungrabbed vty, but not restoring the latter usually left the
keyboard mode part of it uncorrupted at 1 (K_XLATE), while after this
fix the keyboard mode part is usually corrupted to 0 (K_RAW).
While here, rename the grab count from 'grabbed' to grab_level.
- never call up to the tty layer to restart output for keyboard input in
console mode. This was already disallowed in kdb mode. Other cases
are rarely reached.
- disable the reboot, halt and powerdown keys in console mode. The suspend,
standby and panic keys are still allowed, and aren't even conditonal
on excessive configuration options. Some of these actions are still
available in ddb mode as ddb commands which are equally unsafe. Some
are useful at input prompts and should be restored when the locking is
fixed.
- disallow bells in kdb mode (should be in console mode, but the flag for
that is not available). Visual bell gives very alarming behaviour by
trying to use callouts which don't work in kdb mode. Audio bell uses
timeouts and hardware resources with mutexes that can deadlock in
reasonable use of ddb.
Screen switches in kdb mode are not very safe, but they are important
functionality and there is a lot of code to make them sort of work.
restores avoidance of doing dangerous things like calling wakeup() and
callouts while in ddb.
Initialization of 'debugger' was broken by removing the cndbctl() console
method that was used mainly in this driver to initialize 'debugger' and
switch to the console screen on entry to ddb. The screen switch was
restored using the cngrab() method, but cngrab() is more general so it
should not initialize 'debugger' and never did. 'debugger' was just
an over-engineered alias for kdb_active anyway. It existed because
kdb_active (when it was named ddb_active) was considered as a private
kdb variable, and there are ordering problems initializing the variables
atomically with the state that they represent, but an extra variable and
method to set it increased these problems.
The bug caused LORs, but WITNESS is normally misconfigured with
WITNESS_SKIPSIN so it doesn't check the spinlocks used by wakeup() and
callouts.
virtual-device, but needs to be per-physical-device so that it protects
shared data. Usually, scp->sc->write_in_progress got corrupted first
and further corruption was limited when this variable was left at nonzero
with no write in progress.
Attempt to fix missing lock destruction in r162285. Put it with the
lock destruction for r172250 after moving the latter. Both might be
unreachable.
To demonstrate the bug, find a buggy syscall or sysctl that calls
printf(9) and run this often. Run hd /dev/zero >/dev/ttyvN for any
N != 0. The console spam goes to ttyv0 and the non-console spam goes
to ttyvN, so the lock provided no protection (but it helped for
N == 0).
Correctly limit npairs passed to vtnet_ctrl_mq_cmd. This ensures that
VQ_ALLOC_INFO_INIT is called with the correct value, preventing the system
from hanging when max_virtqueue_pairs > VTNET_MAX_QUEUE_PAIRS.
Add new sysctl requested_vq_pairs which allow the user to configure
the requested number of virtqueue pairs. The actual value will still take
into account the system limits.
Also missing sysctls for the current tunables so their values can be seen.
PR: 207446
Reported by: Andy Carrel
MFC after: 3 days
Relnotes: Yes
Sponsored by: Multiplay
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
Several files use the internal name of `struct device` instead of
`device_t` which is part of the public API. This patch changes all
`struct device *` to `device_t`.
The remaining occurrences of `struct device` are those referring to the
Linux or OpenBSD version of the structure, or the code is not built on
FreeBSD and it's unclear what to do.
Submitted by: Matthew Macy <mmacy@nextbsd.org> (previous version)
Approved by: emaste, jhibbits, sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7447
Previously the loop in PCIIOCGETCONF would terminate as soon as it
found enough matches. Now it will continue iterating through the
PCI device list and only terminate if it finds another matching device
for which it has no room to store a conf structure. This means that
PCI_GETCONF_LAST_DEVICE is reliably returned when the number of
matching devices is equal to the number of slots in the matches
buffer. For example, if a program requests the conf structure for a
single PCI function with a specified domain/bus/slot/function it will
now get PCI_GETCONF_LAST_DEVICE instead of PCI_GETCONF_MORE_DEVS.
While here, simplify the loop conditional a bit more by explicitly
breaking out of the loop if copyout() fails and removing a redundant
i < pci_numdevs check.
Reviewed by: vangyzen, imp
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7445
Use this to map an absolute queue ID to a logical queue ID in interrupt
handlers. For the regular cxgbe/cxl drivers this should be a no-op as
the base absolute ID should be zero. VF devices have a non-zero base
absolute ID and require this change. While here, export the absolute ID
of egress queues via a sysctl.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7446
Clear the device description to avoid use after free because the
bsddev is not destroyed when the mlx5en module is unloaded. Only when
the parent mlx5 module is unloaded the bsddev is destroyed. This fixes
a panic on listing sysctls which refer strings in the bsddev after the
mlx5en module has been unloaded.
Sponsored by: Mellanox Technologies
MFC after: 1 week
