mirror of
https://github.com/opnsense/src.git
synced 2026-04-04 17:05:14 -04:00
8 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Navdeep Parhar
|
96807c23ce |
cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0.
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the firmware in -STABLE branches) are in the "Release Notes" accompanying the Unified Wire release and are copy-pasted here as well. 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. ETH - Fixed a link flap issue on T580-CR. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. - Fixed an issue where fw was sending ENETUNREACH event for normal tcp disconnection. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE) - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC settings.(DCBX IEEE) - Fixed an issue where app priority values are not handled correctly in fw. (DCBX IEEE) - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE) FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE) - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE) FOiSCSI - Fixes an issue where fw was sending ENETUNREACH event for normal tcp disconnection. FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 6 weeks Relnotes: yes Sponsored by: Chelsio Communications |
||
|
Navdeep Parhar
|
dd991bd5a1 |
cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0.
These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire v2.12.0.2 for Linux" release. Changes since last release are listed in the "Release Notes" accompanying the beta release and are copy-pasted here as well. The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll MFC this (after 2 months) only if it ends up in a GA release. ================================================================================ ================================================================================ 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. ================================================================================ ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 2 months Sponsored by: Chelsio Communications |
||
|
Navdeep Parhar
|
d94b89b915 |
cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The
changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste
from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0
release on the website).
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential data path hang by properly programming PMTX congestion
threshold settings.
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Fixes a regression where SGE resources can be miss-sized if iWARP is disabled.
ETH:
- Fixes a timing issue that would prevent CR4 links from coming up with some
switches.
FOFCoE:
- Defers fcoe linkdown mailbox command handling till LOGO is sent.
- Updates vlan prio for all outstanding IOs during dcbx update.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Enhances segmentation offload to include VxLAN and Geneve.
- Adds PTP support.
- Adds new interface to allow the driver to query the VI rss table base
addresses.
- Allows the driver to program the SGE ingrext contxt CongDrop field.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
iSCSI:
- Adds support for iscsi segmentatation offload (ISO).
- Adds support for iscsi t10-dif offload.
FOiSCSI:
- Sets FORCE_BIT for cut through processing for FOiSCSI.
FOFCoE:
- Adds support for FCoE BB6.
- Improves WRITE performance.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
- Fixes an issue where 1000Base-X was not enabled correctly when using QSA
modules
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOFCoE:
- Fixes fcoe xchg leaks in linkdown/peer down path
- Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse
- Fixes fw crash by clearing fcf flowc during bye
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
BASE:
- Adds support for VFs on PFs 4 to 7
- Adds support for QPs/CQs on any physical and virtual function
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
- Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables)
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
FOISCSI:
- Adds IPv6 support for foiscsi. Keeps backward compatibility with
old foiscsi drivers which doesn't support ipv6.
FOFCoE:
- Added fcoe debug support in flowc dump
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Fixes an issue where the link would intermittently fail to come up
- Fixes an issue where adapters with an external PHY couldn't run at 100Mbps
- Fixes an issue where active optical cables were not recognized
- Fixes link advertising issues on T520-BT (speed and pause frames) that would
cause the link to negotiate unexpected settings
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
ETH:
- Fixes NVGRE Segmentation Offload network header generation.
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
-------------
BASE:
- Adds link partner settings reporting when available
- Adds QSA support (in conjunction with QSA VPD)
- Adds T520-BT LED support
- Reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Add support for multiple iSCSI DDP client
- Sends DHCP renew request when lease expires
================================================================================
22.2. T4 Firmware
+++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and
register dumps could result in errors.
ETH:
- Fixes an issue that sometimes prevented the link from coming up in CR adapters.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Adds new interface to allow the driver to query the VI rss table base
addresses.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
------------
BASE:
- Adds link partner settings reporting when available
- Firmware now reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Adds support for multiple iSCSI DDP clients
- Sends DHCP renew request when lease expires
================================================================================
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
|
||
|
Navdeep Parhar
|
c7dbd80213 |
cxgbe(4): Update T4 and T5 firmwares to 1.14.2.0.
Obtained from: Chelsio Communications MFC after: 3 days |
||
|
Navdeep Parhar
|
88998d7afc |
Improve compliance with style.Makefile(5).
MFC after: 2 weeks |
||
|
Navdeep Parhar
|
327235b3d6 |
cxgbe(4): Update the bundled T4 and T5 firmwares to versions 1.11.27.0.
Obtained from: Chelsio MFC after: 3 days |
||
|
Navdeep Parhar
|
48d05478bf | cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0 | ||
|
Navdeep Parhar
|
f72b68a1bf |
- Include the T5 firmware with the driver.
- Update the T4 firmware to the latest. - Minor reorganization and updates to the version macros, etc. Obtained from: Chelsio MFC after: 1 day |