While the same update is also available for 24xx chips, it seems have
a problem with disabling virtual ports -- firmware handles the request,
but does not respong on it, causing timeout in driver.
MFC after: 1 month
8 gives the best performance in both Azure and local Hyper-V on both
10Ge and 40Ge. More rings are still allowed by manual configuration.
Reviewed by: Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5879
This time we make sure that the TIME_REF_COUNT MSR exists.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Features bits will be used to detect devices, e.g. timers, which
do not have corresponding event channels.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
Rearranged by: sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
"how" argument is passed as value of int* pointer to callback
function but dereferenced as char* so only one byte taken into
into account. On little-endian systems it happens to work because
first byte is LSB that contains actual value, on big-endian it's
MSB and in this case it's always equal zero
PR: 207786
Submitted by: chadf@triularity.org
This is cosmetics that simplifies identification of new ports on FC switch.
It would be good to use target name from CTL here instead of hostname, but
it is not passed here through CAM now.
MFC after: 2 weeks
VM_NUMA_ALLOC is used to enable use of domain-aware memory allocation in
the virtual memory system. DEVICE_NUMA is used to enable affinity
reporting for devices such as bus_get_domain().
MAXMEMDOM must still be set to a value greater than for any NUMA support
to be effective. Note that 'cpuset -gd' always works if MAXMEMDOM is
enabled and the system supports NUMA.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5782
* Don't use arbitrary frames for the average RX RSSI - only frames
from the current BSSID
* Don't log / do the syncbeacon logic for another BSSID and definitely
don't do the syncbeacon call if we miss beacons outside of STA mode.
* Don't do the IBSS merge bits if the current node plainly won't ever
match our current BSS (ie, the IBSS doesn't have to match, but all
the same bits that we check in ieee80211_ibss_merge() have to match.)
Tested:
* ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks.
Sponsored by: Eva Automation, Inc.
Due to the bug in the number of 'GATHER' subdescriptors for TSO
packets, VNIC was not able to transmit more than one DMA segment
with TSO enabled.
Obtained from: Semihalf
Sponsored by: Cavium
The previous values caused the callout thread stall for 100ms each 2s
if no link is present. Dtrace analysis showed that it has significant
impact on overall interrupt performance.
Decrease these values by a factor of 100.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: zbb
Differential Revision: https://reviews.freebsd.org/D5854
Use vm_guest == VM_GUEST_HV is not enough to determine whether FreeBSD
is running on Hyper-V or not. What a mess.
Reported by: smokehydration tutanota com
Sponsored by: Microsoft OSTC
Previously, the ACPI PCI bus driver did a single pass over the devices in
the namespace that were a child of a given PCI bus to associate the
PCI bus-enumerated device_t devices with the corresponding ACPI handles.
However, this meant that handles were only established at runtime for devices
found during the initial PCI bus scan.
PCI_IOV adds devices that show up after the initial PCI bus scan, and coming
changes to add a bus rescan can also add devices after the initial scan.
This change adds a pci_child_added() callback to the ACPI PCI bus that walks
the namespace to find the ACPI handle for each device that is added. Using
a callback means that the handle is correctly set for any device no matter
how it is added (initial scan, IOV, or a bus rescan).
The SoCs I've tried the driver with include the following:
RT3050, RT5350, RT3662, RT3883, MT7620, MT7621, MT7688.
On boards, based on the above SoCs traffic is passing through correctly
and the boards survive a flood ping with very little or no drops (drops
may be caused elsewhere in my test setup, however).
One issue still remains and needs to be fixed in the future: if_rt does
not survive an ifconfig rt0 down/ifconfig rt0 up cycle.
This issue existed before this commit as well, however.
Reviewed by: ray
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5864
Suggested by: jhb
Reviewed by: Dexuan Cui <decui microsoft com>, Jun Su <junsu microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5850
First of all sema_post() can't be called w/ spinlock, and the channel
message queue processing is not on hot code path, i.e. spinlock is not
necessary.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5812
Since atomic_thread_fence_seq_cst() will become compiler fence on UP kernel.
Reviewed by: kib, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5852
Instead of providing a wrapper around device_delete_child() that the PCI
bus and child bus drivers must call explicitly, move the bulk of the logic
from pci_delete_child() into a bus_child_deleted() method
(pci_child_deleted()). This allows PCI devices to be safely deleted via
device_delete_child().
- Add a bus_child_deleted method to the ACPI PCI bus which clears the
device_t associated with the corresponding ACPI handle in addition to
the normal PCI bus cleanup.
- Change cardbus_detach_card to call device_delete_children() and move
CardBus-specific delete logic into a new cardbus_child_deleted() method.
- Use device_delete_child() instead of pci_delete_child() in the SRIOV code.
- Add a bus_child_deleted method to the OpenFirmware PCI bus drivers which
frees the OpenFirmware device info for each PCI device.
Reviewed by: imp
Tested on: amd64 (CardBus and PCI-e hotplug)
Differential Revision: https://reviews.freebsd.org/D5831
The urtwn hardware transmits FF/A-MSDU just fine - it takes an 802.11
frame and will dutifully send the thing.
So:
* bump RX queue up from 1. Why's it 1? That's really silly.
* Add the "software A-MSDU" encap capability bit.
* bump the TX buffer size up so we can at least send A-MSDU frames.
* track active frames submitted to the NIC - we can't make assumptions
about how many are in flight in the NIC though. For 88E parts we
could use per-packet TX indication, but for R92 parts we can't.
So, just fake it somewhat.
* Kick the transmit queue when we finish reception; try to avoid stalls.
* Kick the FF queue a little more regularly.
A-MSDU TX won't happen until the net80211 side is done, but atheros
fast-frames support should now work.
Tested:
* urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R ; A-MSDU transmit.
This is compatible with the ds1307, but comparing the mcp7941x datasheet vs the
ds1307 code, appears there is one bit placement difference, so that is now
accounted for.
Relnotes: yes
