Also disable IPV6 checksum offload.
Spell hw->mac.type < e1000_82543 as e1000_82542. Confusingly, chips
like 82540 and 82541 come later and do not have these issues. There
is no functional change here, as the enum was defined in such a way
it worked correctly. But this reads literally.
MFC after: 1 week
Currently for the MFS, firmware and VDSO template assembly files we pass
the path to include with .incbin unquoted and use __XSTRING within the
assembly file to stringify it. However, __XSTRING doesn't just perform a
single level of expansion, it performs the normal full expansion of the
macro, and so if the path itself happens to tokenise to something that
includes a defined macro in it that will itself be substituted. For
example, with #define MACRO 1, a path like /path/containing/MACRO/in/it
will expand to /path/containing/1/in/it and then, when stringified, end
up as "/path/containing/1/in/it", not the intended string. Normally,
macros have names that start or end witih underscores and are unlikely
to appear in a tokenised path (even if technically they could), but now
that we've switched to GNU C as of commit ec41a96daa ("sys: Switch the
kernel's C standard from C99 to GNU99.") there are a few new macros
defined which don't start or end with underscores: unix, which is always
defined to 1, and i386, which is defined to 1 on i386. The former
probably doesn't appear in user paths in practice, but the latter has
been seen to and is likely quite common in the wild.
Fix this by defining the macro pre-quoted instead of using __XSTRING.
Note that technically we don't need to do this for vdso_wrap.S today as
all the paths passed to it are safe file names with no user-controlled
prefix but we should do it anyway for consistency and robustness against
future changes.
This allows make tinderbox to pass when built with source and object
directories inside ~/path-with-unix, which would otherwise expand to
~/path-with-1 and break.
PR: 272744
Fixes: ec41a96daa ("sys: Switch the kernel's C standard from C99 to GNU99.")
Explicitly set ipcss/ipcse/ipcso for IPv6 per intel SDM as indicated in
inline comments.
Fix and consolidate 82543/82547 hwcsum exemption.
While here rearrange and expand some commentary.
Ringing the doorbell before making the BPF call can result in the
mbuf being freed before the BPF call.
Reviewed-by: markj
MFC-after: 3 days
Differential Revision: https://reviews.freebsd.org/D41189
The ofw_reg_to_paddr() in this file is the powerpc OF_decode_addr()
formerly added in 812403402e. However,
the latter function in turn was based on the sparc64 counterpart I
previously added in 2b2250b149.
The reference to puc(9) is wrong; the page does not exist, and drivers
belong to section 4. Change the reference to puc(4), which does exist.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
While at it, correct the string for 300 series ones, these also are
already xHCI 3.1.
Fixes: d171d2f2 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
Add CAM_NVME_STATUS_ERROR error code. Flag all NVME commands that
completed with an error status as CAM_NVME_STATUS_ERROR (a new value)
instaead of CAM_REQ_CMP_ERR. This indicates to the upper layers of CAM
that the 'cpl' field for nvmeio CCBs is valid and can be examined for
error recovery, if desired.
No functional change. nda will still see these as errors, call
ndaerror() to get the error recovery action, etc. cam_periph_error will
select the same case as before (even w/o the change, though the change
makes it explicit).
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41085
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
Always set TXD_CMD_IP for 82544
Otherwise set TXD_CMD_IP for IPv4, not IPv6
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
In some cases driver may ask FW about link state before FW finishes
configuration of a (Q)SFP+ transceiver. If first attempt of using Get Link
Status AQC after loading driver or handling a reset fails, then re-try
periodically for 5 seconds.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
Approved by: erj@
MFC after: 2 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D40899
rid was stack garbage, so the bus_alloc_resource_any() call could fail
and fall through to the SMCCC version check even if a bridge had a
memory resource.
Debugging help: jrtc27
Reviewed by: jrtc27
Fixes: c9a05c0722 Add a PCI driver that follows the Arm DEN0115 spec
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D41025
Use autonegotiated link speed value while updating link status
to iflib.
This patch is part of change made in NetBSD kernel
by Masanobu Saitoh, NetBSD maintainer.
Differential Revision: https://reviews.freebsd.org/D19176
Approved by: erj
The default per-queue packet rate of 8000 will cause packet loss when
forwarding at 2.5G with a single stream, as is common when using e.g.
iperf3 to test a platform.
Bump this to 20000 (the "low latency" value in the Linux driver) which
avoids packet loss for this type of test.
Future work will use adaptive interrupt rate in a similar fashion
to the ixgbe driver.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Reviewed by: erj, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D40904
It points to non-existent documentation. The wiki page still contains a
useful overview, so keep this link.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Rename isp_rd_2400_nvram to isp_rd_2xxx_flash.
Cleanup some leftovers.
Hide all output regarding FLT parsing behind ISP_LOGDEBUG0.
Thanks to imp@ and mav@ for reviewing and commenting.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
The ISP26xx based HBAs are left as is for now with static NVRAM addressing.
Those HBAs are known as 83xx (2031 and 8031 for real) and need special handling.
This is left for further investigation for now.
Cosmetics:
- rename functions and defines as they are no longer specific to 28xx
- set reasonable log levels
- sort FLT and NVRAM functions (in the order they are used)
Tested and approved to work on real hardware with:
- Qlogic ISP 2532 (QLogic QLE2562 8Gb 2Port FC Adapter)
- Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter)
- Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter)
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
The FLT is like a TOC for the flash area and contains entries for every flash
region with start/end address, size and flags.
Start using NVRAM addresses from FLT instead of hardcoded ones for ISP28xx
based HBAs.
The FLT should be available on earlier HBAs too, probably since ISP24xx based.
This needs further investigation and testing.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
Use correct NVRAM address for ISP28xx based HBAs to read NVRAM contents.
WWPN/WWNN and framesize are correctly read from NVRAM now.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
This covers the following HBAs:
ISP2812-based 64/32G Fibre Channel to PCIe Controller:
QLE2770 Single Port 32GFC PCIe Gen4 x8 Adapter
QLE2772 Dual Port 32GFC PCIe Gen4 x8 Adapter
QLE2870 Single Port 64GFC PCIe Gen4 x8 Adapter
QLE2872 Dual Port 64GFC PCIe Gen4 x8 Adapter
ISP2814-based 64/32G Fibre Channel to PCIe Controller:
QLE2774 Quad Port 32GFC PCIe Gen4 x16 Adapter
QLE2874 Quad Port 64GFC PCIe Gen4 x16 Adapter
While here, add required bits to support 64GB FC.
Default framesize is set to 2048 for ISP28xx based HBAs for now.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
In most cases, usage does not return, so mark them as __dead2. For the
cases where they do return, they have not been marked __dead2.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/735
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
To enable faster debug of customer issues Intel wants an end user to
gather information about PHY configuration and status to debug link and
connection issues in the field. For this reason the end user should
have possibility of obtaining PHYs registers values at runtime during
debugging.
Differential Revision: https://reviews.freebsd.org/D40354
Approved by: erj
Simply speaking, being started the drm-kmod driver should create sysfs helpers,
which is «drm» class devices, with the unit number 0, 128 and, perhaps 64.
If a drm helper created by vgapci driver with the corresponding unit number
exists then the drm-kmod driver initialize it by the device_initialize() lkpi
method, otherwise drm-kmod driver create new «drm» device.
For hw, where two or more different GPU installed, it's not guaranteed that
the order of loading GPU drivers will be the same as the vgapci devices numbered.
I.e., on hw where vgapci0 is Nvidia GPU and vgapci1 is Intel GPU, when drm-kmod
loaded first it will use drm0 helper of vgapci0 device.
There is no problem for drm-kmod driver unless we do not traverse device
tree, as needed for https://reviews.freebsd.org/D38545.
drm-kmod is ok for this change as it has fallback to create corresponding
drm device.
Reviewed by:
Differential Revision: https://reviews.freebsd.org/D38546
- Add new DB_DEFINE_TABLE and DB_DECLARE_TABLE macros to define new
command tables. DB_DECLARE_TABLE is intended for use in headers
similar to MALLOC_DECLARE and SYSCTL_DECL.
DB_DEFINE_TABLE takes three arguments, the name of the parent table,
the command name, and the name of the table itself, e.g.
DB_DEFINE_TABLE(show, foo, show_foo) defines a new "show foo" table.
- DB_TABLE_COMMAND, DB_TABLE_COMMAND_FLAGS, DB_TABLE_ALIAS, and
DB_ALIAS_FLAGS allow new commands and aliases to be defined. These
are similar to the existing DB_COMMAND, etc. except that they take
an initial argument giving the name of the parent table, e.g.:
DB_TABLE_COMMAND(show_foo, bar, db_show_foo_bar)
defines a new "show foo bar" command.
This provides a cleaner interface than the ad-hoc use of internal
macros like _DB_SET that was required previously (e.g. in cxgbe(4)).
This retires DB_FUNC macro as well as the internal _DB_FUNC macro.
Reviewed by: melifaro, kib, markj
Differential Revision: https://reviews.freebsd.org/D40819
Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/
Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791
Bug Fixes:
* Initialize statistics before the interface is available
* Fix driver unload crash
Minor Changes:
* Mechanically convert ena(4) to DrvAPI
* Remove usage of IFF_KNOWSEPOCH
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
When ena_detach is called, we first call ether_ifdetach(),
which destroys internal addresses of ifp. One such address
is ifp->if_addr->ifa_addr. Then during ena_destroy_device(),
if_link_state_change() is called, eventually trying to access
ifp->if_addr->ifa_addr->sa_family. This causes an access
to garbage memory and crashes the kernel.
Ticket [1] was opened to the FreeBSD community to add null
check in the code of if_link_state_change().
A fix was submitted in commit [2], however it was noted
that it is our driver's responsibilty to not call
if_link_state_change() after calling ether_ifdetach().
This commit makes sure if_link_state_change() is not called
after ether_ifdetach().
[1]: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270813
[2]: https://reviews.freebsd.org/D39614
Fixes: 32f63fa7f9 ("Split ENA reset routine into restore and destroy stages")
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In [1], the FBSD community exposed a bug in the fbsd/ena driver.
Bug description:
----------------
Current function call order is as follows:
1. ena_attach()
1.1. ena_setup_ifnet()
1.1.1. Registration of ena_get_counter()
1.1.2. ether_ifattach(ifp, adapter->mac_addr);
1.2. Statistics allocation and initialization.
At point 1.1.2, when ether_ifattach() returns, the interface is available,
and stats can be read before they are allocated, leading to kernel panic.
Also fixed a potential memory leak by freeing the stats since they were
not freed in case the following calls failed.
Fix:
----
This commit moves the statistics allocation and initialization to happen
before ena_setup_ifnet()
[1] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=268934
Fixes: 9b8d05b8ac ("Add support for Amazon Elastic Network Adapter (ENA) NIC")
Fixes: 30217e2dff ("Rework counting of hardware statistics in ENA driver")
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
- Increase verbosity to direct i/o code path (iores != 0)
- Fix pin inversion configuration
- Allow forcing the use of indirect access channel via hint.gpio.0.flags=2
- Document the PREFER_INDIRECT_CHANNEL tunable in nctgpio(4)
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/719
