Some RISC-V CPUs contain a "monitor core" with limited functionality (no
MMU). These cores appear in some device trees, but we don't run the
kernel on them; in early CPU start-up code we skip them, and they have
no impact on mp_ncpu. It seems the new trend is to mark these monitor
cores with a 'status' property of 'disabled'.
However, we still instantiate an ofw_cpu pseudo device for the disabled
core. This is generally harmless, but there is an impact when attempting
to attach the cpufreq_dt driver. It counts more OFW CPU devices (unit
number) than logical CPUs (mp_ncpus), and therefore fails to attach for
the last logical CPU.
The solution is to check the status property in ofw_cpu_probe(), and
fail if the core is marked "disabled". This is subject to the same
exception already in ofw_cpu_early_foreach(); that is, if a disabled CPU
has an 'enable-method' property, it can be used by the kernel.
Reviewed by: andrew, jrtc27
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D48123
Mainly, to avoid repeating the list of architectures, #define HAS_CLK.
Further, split the clk code into a helper function, which is a stub in
the !HAS_CLK case. This aids in overall legibility.
While here, add one separating whitespace, again for legibility.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D48149
The canonical name is __riscv, not __riscv__. Newer compilers no longer
emit the latter.
This re-enables finding the nominal frequency from the CPU's clock.
I checked, and there are no remaining mistakes like this in the tree.
Reviewed by: jrtc27, imp, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D48122
Otherwise this matches any two-character status except for ok.
Fixes: e5e94d2de9 ("Expand OpenFirmware API with ofw_bus_node_status_okay method")
MFC after: 1 week
All architectures define PCI_RES_BUS unconditionally now that only
NEW_PCIB is supported, so we no longer need the legacy code.
Reviewed by: jhb, andrew
Differential Revision: https://reviews.freebsd.org/D32955
All architectures enable NEW_PCIB in DEFAULTS (arm being the most recent
to do so in 121be55599 (arm: Set NEW_PCIB in DEFAULTS rather than a
subset of kernel configs")), so it's time we removed the legacy code
that no longer sees much testing and has a significant maintenance
burden.
Reviewed by: jhb, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D32954
Most of these already treat it as a proper bool, i.e. using true/false.
Also fix-up callers of OF_install().
No functional change intended.
Reviewed by: andrew, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45733
The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44131
The public bus_activate/deactivate_resource() API still accepts both
forms, but the internal kobj methods no longer pass the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44130
The public bus_map/unmap_resource() API still accepts both forms, but
the internal kobj methods no longer pass the argument.
Implementations which need the type now use rman_get_type() to fetch
the value from the allocated resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44129
The public bus_adjust_resource() API still accepts both forms, but the
internal kobj method no longer passes the argument. Implementations
which need the type now use rman_get_type() to fetch the value from
the allocated resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44128
- Implement bus_map/unmap_resource pulling bits from the previous
ofw_pcib_activate/deactivate_resource. One difference here is that
the bus_unmap_resource implementation uses bus_space_unmap instead
of pmap_unmapdev as a complement to the existing use of bus_space_map.
- Use bus_generic_rman_* in various routines for memory and I/O port
resources.
- Use pci_domain_* for PCI_RES_BUS in
ofw_pcib_activate/deactivate_resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43441
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
While here make it only probe if the node is directly under the root
one. If it's not it's likely a device node named 'firmware' and not the
firmware group we're interested in.
Suggested by: jhb
Sponsored by: Beckhoff Automation GmbH & Co. KG
If there is a compatible string it likely means that the firmware needs
a dedicated driver (like on RPI*).
PR: 273087
Tested-by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: Beckhoff Automation GmbH & Co. KG
Fixes: fdfd3a90b6 ("ofw: Add a ofw_firmware driver")
Some SoCs have an external firmware doing power management, clock
and other stuffs. (Xilinx, ARM Juno etc ...)
The way it is represent in the DTB is usually having a 'firmware' node
under the root node and have some nodes under it with the correct
compatible strings.
The firmware node itself doesn't have any compatible strings.
This driver is simple subclassed from simplebus and attaches at
BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE so early drivers (like clock drivers)
can still have a change to attach early.
Reviewed by: andrew
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37612
The ofw_reg_to_paddr() in this file is the powerpc OF_decode_addr()
formerly added in 812403402e. However,
the latter function in turn was based on the sparc64 counterpart I
previously added in 2b2250b149.
Since commit ecaecbc7d8, calling
ofw_bus_gen_setup_devinfo() is redundant, as the call to
device_set_ivars() now happens inside simplebus_add_device().
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D40271
We already do plenty to announce the different CPUs in dmesg. Follow the
ACPI CPU strategy of reporting the first CPU device, but quieting the
rest for non-verbose boot. This cuts down slightly on dmesg output.
Reviewed by: manu, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40243
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
ofwbus has always been the root of attachment for OFW/FDT platforms. It
may have simplebus children, but we expect only one instance of the
ofwbus driver, added directly by nexus. We may as well ensure this
remains the case.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D38493
Rather than using the DEVICE_IDENTIFY method, let's have other
ofwbus-using platforms add ofwbus0 explicitly in nexus, like arm64. This
gives them the same flexibility, e.g. if riscv starts supporting ACPI,
and cleans up the #ifdefs.
We were doing this already on riscv, but adjust the 'order' parameters.
Reviewed by: andrew, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D38492
The architecture nexus should handle allocation and release of memory and
interrupts. This is to ensure that system-wide resources such as these
are available to all devices, not just children of ofwbus0.
On powerpc this moves the ownership of these resources up one level,
from ofwbus0 to nexus0. Other architectures already have the required
logic in their nexus implementation, so this eliminates the duplication
of resources. An implementation of nexus_adjust_resource() is added for
arm, arm64, and riscv.
As noted by ian@ in the review, resource handling was the main bit of
logic distinguishing ofwbus from simplebus. With some attention to
detail, it should be possible to merge the two in the future.
Co-authored by: mhorne
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30554
This add BUS_GET_DEVICE_PATH interface,
which shows device tree of openfirm/fdt.
In qemu-system-arm64 with "virt" machine with device-tree firmware,
% devctl getpath OFW cpu0
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37031
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
With clang 15, the following -Werror warning is produced:
sys/dev/ofw/openfirm.c:826:9: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
OF_enter()
^
void
This is because OF_enter() and OF_exit are declared with a (void)
argument list, but defined with an empty argument list. Make the
definition match the declaration.
Sponsored by: The FreeBSD Foundation
rman_fini assumes rman_init has been called successfully. Clean up
init faulure by only calling rman_fini when rman_init has succeeded.
While here add ofw_pcib_fini that can be used by a sub-class to clean
up.
Reviewed by: bz, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35681
Add serial-number sysctl if that fdt property exists and is a printable
string. While here, ensure that the hw.fdt sysctl values fit in the
buffers provided so that they will be NUL-terminated. Tested on
Raspberry Pi 3B+ and 4.
MFC after: 5 days
Reviewed by: manu imp
Differential Revision: https://reviews.freebsd.org/D34356
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
For RISC-V it was always enabled.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33835
We do not include sys/rman.h and so machine/resource.h ends up not being
included by the time pci_private.h is included. This means PCI_RES_BUS
is never defined, and so the sc_bus member of pci_softc is not present
when compiling ofw_pci, resulting in the wrong softc size being passed
to DEFINE_CLASS_1 and thus any attempts by pci(4) to access that member
are out-of-bounds reads or writes.
This is pretty fragile; arguably pci_private.h should be including
sys/rman.h, but this is the minimal needed change to fix the bug whilst
maintaining the status quo.
Found by: CHERI
Reported by: andrew
- Return an errno value upon failure, instead of 1.
- Provide a bus_translate_resource() wrapper.
- Implement the generic version, which traverses the hierarchy until a
bus driver with a non-trivial implementation is found, in subr_bus.c
like other similar default implementations.
- Make ofw_pcib_translate_resource() return an error if a matching PCI
address range is not found.
- Make generic_pcie_translate_resource_common() return an int instead of
a bool. Fix up callers.
No functional change intended.
Reviewed by: imp, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32855
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
This make it easier for script to get the hardware on which they are running.
MFC after: 1 month
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D31205
Reviewed by: imp
Should be ok on powerpc: jhibbits (over irc)
phandle_t is a uint32_t type, <= 0 comparison doesn't work with it as intended.
This caused the ofw_pci code to attach to PCI bus on ACPI based systems.
Since 3eae4e106a ("Fix error value returned by ofw_bus_gen_get_node().")
ofw subsystem can only return -1 for invalid nodes. Use that.
MFC after: 4 weeks
Reviewed by: mw
Differential revision: https://reviews.freebsd.org/D30953
