Currently the network change is simulated by link status changes.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8295
Instead replace it with a different hack, that turns fman into a simplebus
subclass, and maps its children within its address space.
Since all PHY communication is done through dtsec0's mdio space, the FDT
contains a reference to the dtsec0 mdio handle in all nodes that need it.
Instead of using Freescale's implementation for MII access, use our own (copied
loosely from the eTSEC driver, and could possibly be merged eventually). This
lets us access the registers directly rather than needing a full dtsec interface
just to access the registers.
Future directions will include turning fman into more of a simplebus, and not
mapping the region and playing games. This will require changes to the dtsec
driver to make it a child of fman, and possibly other drivers as well.
host-programmed DMA regions. This change seemingly fixes the
descriptor fetches, but the packet memory accesses are left
problematic.
Reviewed by: emaste, erj, sbruno
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8282
fastpath and slowpath taskqueues.
2. Service all transmits in taskqueue threads.
3. additional stats counters for keeping track of
- bd availability
- tx buf ring not emptied in the fp task queue.
These are drained via timeout taskqueue.
- tx attempts during link down.
MFC after: 5 days
fix build on 32 bit platforms
simplify logic in netmap_virt.h
The commands (in net/netmap.h) to configure communication with the
hypervisor may be revised soon.
At the moment they are unused so this will not be a change of API.
As part of an effort to extend Book-E to the 64-bit world, make the necessary
changes to the DPAA/dTSEC driver set to be integer-pointer conversion clean.
This means no more casts to int, and use uintptr_t where needed.
Since the NCSW source is effectively obsolete, direct changes to the source tree
are safe.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().
Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.
While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.
Tested by: Jan Henrik Sylvester <me@janh.de>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8070
MFC after: 2 weeks
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
Split efirt.ko initialization into early stage where runtime services
KPI environment is created, to be used e.g. for RTC, and the later
devfs node creation stage, per module.
Switch the efi device to use make_dev_s(9) instead of make_dev(9). At
least, this gracefully handles the duplicated device name issue.
Remove ARGSUSED comment from efidev_ioctl(), all unused arguments are
annotated with __unused attribute.
Reported by: ambrisko, O. Hartmann <ohartman@zedat.fu-berlin.de>
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Comparing to the Linux driver there is still one missing feature.
The Linux driver finds and enables "Embedded Controller" item in
the 0x11 group if it's not enabled yet.
I tested the new method, Torfinn Ingolfsen tested the old method
and helped to fix several bugs in the earlier versions of the patch.
Tested by: Torfinn Ingolfsen <torfinn.ingolfsen@getmail.no>
Reviewed by: rpaulo
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D8227
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reported by: Lili Deng <v-lide microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8238
Suppose that we have an exclusively busy page, and a thread which can
accept shared-busy page. In this case, typical code waiting for the
page xbusy state to pass is
again:
VM_OBJECT_WLOCK(object);
...
if (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(object); <---1
vm_page_busy_sleep(p, "vmopax");
goto again;
}
Suppose that the xbusy state owner locked the object, unbusied the
page and unlocked the object after we are at the line [1], but before we
executed the load of the busy_lock word in vm_page_busy_sleep(). If it
happens that there is still no waiters recorded for the busy state,
the xbusy owner did not acquired the page lock, so it proceeded.
More, suppose that some other thread happen to share-busy the page
after xbusy state was relinquished but before the m->busy_lock is read
in vm_page_busy_sleep(). Again, that thread only needs vm_object lock
to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to
the VPB_SHARERS_WORD(1).
In this case, all tests in vm_page_busy_sleep(9) pass and we are going
to sleep, despite the page being share-busied.
Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9)
to also accept shared-busy state if we only wait for the xbusy state to
pass.
Merge sequential if()s with the same 'then' clause in
vm_page_busy_sleep().
Note that the current code does not share-busy pages from parallel
threads, the only way to have more that one sbusy owner is right now
is to recurse.
Reported and tested by: pho (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8196
Previously the driver used more low level operations like iicbus_start
and iicbus_write. The problem is that those operations are not
implemented by iicbus(4) and the calls were effectively routed to
a driver to which the bus is attached.
But not all of the controllers implement such low level operations
while all of the drivers are expected to have iicbus_transfer.
While there fix incorrect implementation of iicsmb_bwrite and iicsmb_bread.
The former should send a byte count before the actual bytes, while the
latter should first receive the byte count and then receive the bytes.
I have tested only these commands:
- quick (r/w)
- send byte
- receive byte
- read byte
- write byte
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8170
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
to ieee80211_add_rx_params() + drop last (ieee80211_rx_stats) parameter
Note: there is an additional check for ieee80211_get_rx_params()
return value (which does not exist in the original diff).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8207
- If check for net,ethernet/usb,device compatible node fails, try to find
.../usb/hub/ethernet, where ... is bus path that can depend on actual HW.
net,ethernet/usb,device compatibity strings are FreeBSD custom invention
that is used only in RPi DTBs and since there is no other way to tie USB
device to FDT node we just do our best effort here to work with upstream
device tree
- Use -1 value to indicate invalid phandle_t, 0 is valid phandle value and
shouldn't be used as error signal
This will allow to add slave drivers in the same fashion as for iicbus.
Also, allow other code to add a child device and set its 'addr' ivar.
The ivar can only be set if it's unset, it can not be changed.
That could be used, for example, by a platform driver that has
a precise description of the hardware and, thus, knows what drivers
can handle what slaves.
The slave auto-probing code is unsafe and broken because it uses
7-bit slave addresses. It's going to be removed.
Note: internally the driver uses address of zero as an unset address
while smbus_get_addr() returns it as -1 for compatibility reasons.
The address is expected to be unset only for children that do not
work with slaves like, for example, smb(4).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8173
This should have been committed in r307093: resource allocation depends
on source of the device tree. upstream dts has extra interrupt that we can
ignore
userland. It supports userland interfaces to UEFI Runtime Services. This is
indended to the the MI portion of EFI RuntimeServices support.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
Extend the mapping table for external port numbering to support port modes
which output to the second external port only. Where supported, map from
the current port mode rather than inferring from all the available modes.
Updated comments for clarity.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8210
This is the preamble for network device SR-IOV and
NDIS_STATUS_NETWORK_CHANGE handling.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8209
It fixes driver attach issue to a new firmware which reports a new
port-modes.
Reviewed by: gnn
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8203
The _correct_ way to identify the supported checksum offloading and
TSO parameters is to query OID_TCP_OFFLOAD_HARDWARE_CAPABILITIES.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8088
