Make OSS_GETVERSION ioctl really work. It has 'M' group, not 'P',
as different nearby ones, and was grabbed by MIXER_xxx() handler.
While there, replace '(cmd & MIXER_xxx(0)) == MIXER_xxx(0)' expressions
with more correct '(cmd & ~0xff) == MIXER_xxx(0)'. Use of bit operations
to compare numeric fields doesn't looks sane.
Don't panic on failure to attach if we fail before or during the
if_alloc() of ifp.
This fixes the panic reported in the PRs, but not the attach failure.
PR: kern/139079, kern/143874
Tested by: Steven Noonan <steven uplinklabs.net>
Reviewed by: thompsa
201408,201325,200089,198822,197373,197372,197214,196162). Since one of those
changes was a semicolon cleanup from somebody else, this touches a lot more.
Rename aac_fast_intr to aac_filter to reflect its current use. Eliminate
the fallback of using the filter as an interrupt handler, as it is no
longer needed.
Discussed with: scottl, jhb
- Improve tracer, to handle more cases of input-to-output monitoring
loopback.
- Use "igain" mixer control for input-to-output monitoring loopback.
- Allow AD1981HD codecs to use playback mixer. Now driver should be able to
really use it.
- Fix bug in shared muters operation.
(S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
o add more notification strings in iwn_intr_str()
o sync with OpenBSD code
Submitted by: Bernhard Schmidt <bschmidt at techwires.net>
MFC after: 3 days
Overhaul of the pcii driver:
. Properly allocate all IO space resources. These cards scatter their
IO addresses over a range of 0x1600 bytes, and they require an
additional address for "special interrupt handling".
. Implement the "special interrupt handling" per the GPIB-PCIIA
Technical Reference Manual; this was apparently not declared for the
clone card this driver has been originally implemented for, but it
turned out to be needed for both, an original NI brand PCII/PCIIA
card as well as the Axiom AX5488 clone.
. Add some diagnostic messages for various resource allocation etc.
failures during probe.
. Add some comments about the structure of the IO address space that
is used by these cards.
Fix a handful of issues with via agp support.
* Read the pci capability register to identify AGP 3 support
* Add missing smaller aperture sizes for AGP3 chips.
* Fix the aperture size calculation on AGP2 chips.
All sizes between 32M and 256M reported as 256M.
* Add \n to error string.
o Add PCI ID for BCM 5756.
o Don't enable BGE_FLAG_BER_BUG on both 5722 and 5756, and based
on their PCI IDs rather than their chip IDs.
Reported by: several PC-BSD users via kmoore
Reviewed by: yongari, imp, jhb, davidch
Sponsored by: iXsystems, Inc.
Add multichannel (4.0, 5.1 and 7.1) playback support.
Stereo stream is no more duplicated to all ports. If you loose sound, check
you are using right connectors. Front speakers connector is usually green,
center/LFE - orange, rear - black, side - gray.
Make default recording source choosing more intelligent.
Change default recording level from 0 to 75.
It should increase chances for things to work just out of the box.
r201907:
Extra parantheses to keep certain compilers happy.
r202671:
Fix for a cxgb(4) panic. cxgb_ioctl can be called by the IP and IPv6
layers with non-sleepable locks held. Don't (potentially) sleep in
those situations.
r202678:
Complain if freelist queue sizes are significantly less than desired.
Don't free mbuf chains when bge(4) fails to collapse the mbuf
chains. This part of code is to enhance performance so failing the
collapsing should not free TX frames. Otherwise bge(4) will
unnecessarily drop frames which in turn can freeze the network
connection.
Reported by: Igor Sysoev (is <> rambler-co dot ru)
Tested by: Igor Sysoev (is <> rambler-co dot ru)
Add check for fiber mode for BCM5714 PHY. This PHY supports both
copper and fiber interfaces over GMII so an explicit check is
necessary to know whether it was configured for fiber interface.
This change make BCM5715S work.
Tested by: olli
PR: kern/122551
For controllers that has dual mode PHY(copper or fiber) interfaces
over GMII, make sure to enable GMII. With this change brgphy(4) is
used to handle the dual mode PHY. Since we still don't have a sane
way to pass PHY specific information to mii(4) layer special
handling is needed in brgphy(4) to determine which mode of PHY was
configured in parent interface.
This change make BCM5715S work.
Tested by: olli
Obtained from: OpenBSD
PR: kern/122551
Usually these controllers are able to automatically decode command code to
get required command protocol. But they have no idea about new commands,
such as DATA SET MANAGEMENT (TRIM). As soon as this info any way provided
by CAM, give controller specific instructions.
Clear all ports interrupt status bits in single write. Clearing one by one
causes additional MSIs messages sent if several ports asked for attention
same time. Time window before clearing is not important, as these interrupts
are level triggered by interrupt source.
