The returned error number may be EINTR or ERESTART depending on
whether or not the signal is supposed to interrupt the system call.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This fixes a "timed sleep before timers are working" panic seen
while attaching jedec_dimm(4) instances too early in the boot.
Submitted by: ian
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D21452
Remove now-redundant items from toepcb and synq_entry and the code to
support them.
Let the driver calculate tx_align, rx_coalesce, and sndbuf by default.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21387
descriptor. The per-tid tx credits are in demand during active Tx and
it's best not to use too many just for payload.
Sponsored by: Chelsio Communications
According to ACPI 6.3 specification:
The OS sets this bit to 1 if it supports PCI Segment Groups as defined
by the _SEG object, and access to the configuration space of devices
in PCI Segment Groups as described by this specification. Otherwise,
the OS sets this bit to 0.
As far as I see we support both of those as PCI domains for quite a while.
MFC after: 2 months
According to my tests and errata to several generations of Intel CPUs,
PCIe hot-plug command completion reporting is not very reliable thing.
At least on my Supermicro X11DPi-NT board I never saw it reported.
Before this change timeout code detached devices and tried to disable
the slot, that in my case resulted in hot-plugged device being detached
just a second after it was successfully detected and attached. This
change removes that, so in case of timeout it just prints the error and
continue operation. Linux does the same.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The netmap_pt.c module has become obsolete after
the refactoring that added netmap_kloop.c.
Remove it and unlink it from the build system.
MFC after: 1 week
While it worked with the kenrel, it wasn't working with the loader.
It failed to handle dependencies correctly. The reason for that is
that we never created a nvme module with the DRIVER_MODULE, but
instead a nvme_pci and nvme_ahci module. Create a real nvme module
that nvd can be dependent on so it can import the nvme symbols it
needs from there.
Arguably, nvd should just be a simple child of nvme, but transitioning
to that (and winning that argument given why it was done this way) is
beyond the scope of this change.
Reviewed by: jhb@
Differential Revision: https://reviews.freebsd.org/D21382
queues, don't try to tear them down in the ctrlr_destroy
path. Otherwise, we dereference queue structures that are NULL and we
trap.
This fix is incomplete: we leak IRQ and MSI resources when this
happens. That's preferable to a crash but still should be fixed.
load and people who pull in nvme/nvd from modules can't load nvd.ko
since it depends on nvme, not nvme_foo. The duplicate doesn't matter
since kldxref properly handles that case.
Turn off bus master after we detach the device (to match the prior
order). Release MSI after we're done detaching and have turned off
all the interrupts. Otherwise this may cause problems as other threads
race nvme_detach. This more closely matches the old order.
Reviewed by: mav@
After r351243 when ALTQ was enabled in the kernel, the inline functions
in ifq.h would not have full type information as if_var.h was not
included.
Given usb_ethernet.h already includes all the various headers (which)
is the cause of the problem here, add if_var.h to it. This fixes the
builds again.
Reported by: CI system, e.g. FreeBSD-head-aarch64-LINT
Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.
When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.
This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.
Submitted by: cognet@ (Olivier Houchard)
Nvme drives can be attached in a number of different ways. Separate out the PCI
attachment so that we can have other attachment types, like ahci and various
types of NVMeoF.
Submitted by: cognet@
If device is unplugged from the system (CSTS register reads return
0xffffffff), it makes no sense to send any more recovery requests or
expect any responses back. If there is a detach call in such state,
just stop all activity and free resources. If there is no detach
call (hot-plug is not supported), rely on normal timeout handling,
but when it trigger controller reset, do not wait for impossible and
quickly report failure.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This fixes possible double call of fail_fn, for example on hot removal.
It also allows ctrlr_fn to safely return NULL cookie in case of failure
and not get useless ns_fn or fail_fn call with NULL cookie later.
MFC after: 2 weeks
Otherwise the mutex needs to be dropped when copying out the midistat
sbuf, leading to a race which allows one to read kernel memory beyond
the end of the sbuf buffer.
Reported and tested by: pho
Security: CVE-2019-5612
order to have struct mii_data available. However, it only really needs
a forward declaration of struct mii_data for use in pointer form for
the return type of a function prototype.
Custom kernel configuration that have usb and fdt enabled, but no miibus,
end up with compilation failures because miibus_if.h will not get
generated.
Due to the above, the following changes have been made to usb_ethernet.h:
* remove the inclusion of mii headers
* forward-declare struct mii_data
* include net/ifq.h to satify the need for complete struct ifqueue
Reviewed by: ian
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D21293
Return an empty string when the location is unknown instead of the
string "unknown". This ensures that all location entries are of
the form key=val.
Suggested by: imp
Approved by: jhb (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21326
Move fast entropy source registration to the earlier
SI_SUB_RANDOM:SI_ORDER_FOURTH and move random_harvestq_prime after that.
Relocate the registration routines out of the much later randomdev module
and into random_harvestq.
This is necessary for the fast random sources to actually register before we
perform random_harvestq_prime() early in the kernel boot.
No functional change.
Reviewed by: delphij, markjm
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D21308
If simple multifuction device also provides syscon interface, its
childern should be able to consume it. Due to this:
- declare coresponding method in syscon interface
- implement it in simple multifunction device driver
MFC after: 1 week
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
It is unused, the ABI was broken in r322969, and it is broken by design
(more than MDNPAD md devices can exist and there is no way to retreive
them with this interface).
mdconfig(8) was converted to use libgeom to obtain this information
in r157160 and any other consumers of MDIOCLIST should likewise be
converted.
Reviewed by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18936
This adds safety net for the case of misconfigured NTB with too big
memory window, for which we may be unable to allocate a memory buffer,
which does not make much sense for the network interface. While there,
fix the code to really work with asymmetric window sizes setup.
This makes driver just print warning message on boot instead of hanging
if too large memory window is configured.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
