On amd64 the RSP address can be read in single 8-byte transaction,
which is obviously not possible on 32-bit platforms. Fix that
by performing 2 4-byte read on them.
Obtained from: Semihalf
Sponsored by: Stormshield
This fixes a warning seen when compiling amd64 GENERIC with clang 7.
Also remove the workaround added in r337324. clang 7 and gcc 4.2
generate the same code with or without the code change.
Reviewed by: imp (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18603
- Fix PR 227760 by getting the TOE to respond to the SYN after the call
to toe_syncache_add, not during it. The kernel syncache code calls
syncache_respond just before syncache_insert. If the ACK to the
syncache_respond is processed in another thread it may run before the
syncache_insert and won't find the entry. Note that this affects only
t4_tom because it's the only driver trying to insert and expand
syncache entries from different threads.
- Do not leak resources if an embryonic connection terminates at
SYN_RCVD because of L2 lookup failures.
- Retire lctx->synq and associated code because there is never a need to
walk the list of embryonic connections associated with a listener.
The per-tid state is still called a synq entry in the driver even
though the synq itself is now gone.
PR: 227760
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Those should ensure correctness of ichwd_find_ich_lpc_bridge() and
ichwd_find_ich_lpc_bridge() as well as make it easier for both humans
and static analyzers to see the relation between tco_version and ich and
smb variables in ichwd_identify().
Reported by: Coverity
CID: 1396314, 1396317
MFC after: 10 days
The code is unreachable since the entries of radeon_ioctls[] are not
associated with any device: we provide only the KMS entry points.
Moreover, r600_cp_dispatch_texture() contains an integer overflow bug
that can be triggered from userspace.[1]
Reported by: Anonymous of the Shellphish Grill Team[1]
Reviewed by: dumbbell
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18516
This includes removing stray whitespace, adding a line after the
variable declaration block and removing a redundant check.
MFC after: 1 week
X-MFC with: r339754
In testing on a Dell Latitude 7480, having ig4.ko loaded during a
suspend caused the system to hang. It turns out that ig4iic_intr() was
being called after the device entered D3, and entered an infinite loop
because a read of the I2C status register returned all ones, causing us
to attempt to read a byte from the data buffer until one of the status
bits clears. This occured because ig4iic_pci0 shares an interrupt with
the VGA device on this laptop, so ig4iic_intr() gets called even when
there is no work to do. This is exactly the problem fixed by r342170,
which resolves the hang for me and allows suspend/resume to work with
ig4.ko loaded. So, re-enable autoloading of ig4.ko in the hope that
r342170 resolves the problem universally.
Reviewed by: gonzo
MFC after: 1 month (pending an MFC of r342170)
Differential Revision: https://reviews.freebsd.org/D18587
The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
PR: maybe related to 233998 (inconclusive at this time)
Submitted by: byuu <byuu AT tutanota.com> (previous version)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18506
It was written basing on:
TCG PC Client Platform TPM Profile (PTP) Specification Version 22, Revision 1.03.
It only supports Locality 0. Interrupts are only supported in FIFO mode.
The driver in FIFO mode was tested on x86 with Infineon SLB9665 discrete TPM chip.
Driver in both modes was also tested on qemu with swtpm running on host.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D18048
This is based on a patch developed by
Tetsuya Uemura <t_uemura@macome.co.jp>.
Many thanks!
Submitted by: Tetsuya Uemura <t_uemura@macome.co.jp> (earlier version)
Tested by: Tetsuya Uemura <t_uemura@macome.co.jp>
MFC after: 2 weeks
very minimal prints and even few important messages will not get logged.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
capable IOs. NVME specification supports specific type of scatter gather list
called as PRP (Physical Region Page) for IO data buffers. Since NVME drive is
connected behind SAS3.5 tri-mode adapter, MegaRAID driver/firmware has to convert
OS SGLs in native NVMe PRP format. For IOs sent to firmware, MegaRAID firmware
does this job of OS SGLs to PRP translation and send PRPs to backend NVME device.
For fastpath IOs, driver will do this OS SGLs to PRP translation.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
required Write IOs as Fast Path IOs (after the appropriate checks
allowing Fast Path to be used) to the appropriate physical drives
(translated from the OS logical IO) and wait for all Write IOs to complete.
Design: A write IO on RAID volume will be examined if it can be sent in
Fast Path based on IO size and starting LBA and ending LBA falling on to
a Physical Drive boundary. If the underlying RAID volume is a RAID 1/10,
driver issues two fast path write IOs one for each corresponding physical
drive after computing the corresponding start LBA for each physical drive.
Both write IOs will have the same payload and are posted to HW such that
replies land in the same reply queue.
If there are no resources available for sending two IOs, driver will send
the original IO from upper layer to RAID volume through the Firmware.
When both IOs are completed by HW, the resources will be released
and SCSI IO completion handler will be called.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
stream to help HBA Firmware do the Full Stripe Writes. For read IOs on
certain RAID volumes like Read Ahead volumes,this will help driver to
send it to Firmware even if the IOs can potentially be sent to
hardware directly (called fast path) bypassing firmware.
Design: 8 streams are maintained per RAID volume as per the combined
firmware/driver design. When there is no stream detected the LRU stream
is used for next potential stream and LRU/MRU map is updated to make this
as MRU stream. Every time a stream is detected the MRU map
is updated to make the current stream as MRU stream.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
for different number of supported VDs for SAS3.5 MegaRAID adapters.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
In the nda(4) driver, only set DISKFLAG_CANDELETE (a.k.a. can support
BIO_DELETE) if the drive supports Dataset Management. There are reports
that without this check, VMWare Workstation does not work reliably.
Fix is to check the ONCS field in the NVMe Controller Data structure for
support. This check previously existed but did not survive the
big-endian changes.
Reported by: yuripv@yuripv.net
Reviewed by: imp, mav, jimharris
Approved by: imp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18493
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
If bus_dmamap_load_mbuf() fails following a defrag, the caller of
bwn_dma_tx_start() would free the original mbuf after m_defrag() had
already done so. Fix this by returning the defragged mbuf to the
caller instead. Update bwn_pio_tx_start() similarly for consistency.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: landonf
Tested by: landonf
MFC after: 3 days
admbug: 820
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18342
PR: 217505
Submitted by: John O. Brickley <obryan.brickley@gmail.com>, updated by Maciej Pasternacki <maciej@pasternacki.net>
Reported by: John O. Brickley <obryan.brickley@gmail.com>
MFC after: 1 week
