Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
- Consistently use 'void *' for key schedules / key contexts instead
of a mix of 'caddr_t', 'uint8_t *', and 'void *'.
- Add a ctxsize member to enc_xform similar to what auth transforms use
and require callers to malloc/zfree the context. The setkey callback
now supplies the caller-allocated context pointer and the zerokey
callback is removed. Callers now always use zfree() to ensure
key contexts are zeroed.
- Consistently use C99 initializers for all statically-initialized
instances of 'struct enc_xform'.
- Change the encrypt and decrypt functions to accept separate in and
out buffer pointers. Almost all of the backend crypto functions
already supported separate input and output buffers and this makes
it simpler to support separate buffers in OCF.
- Remove xform_userland.h shim to permit transforms to be compiled in
userland. Transforms no longer call malloc/free directly.
Reviewed by: cem (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24855
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
The following series of patches addresses three things:
Now that array of pages is embedded into mbuf, we no longer need
separate structure to pass around, so struct mbuf_ext_pgs is an
artifact of the first implementation. And struct mbuf_ext_pgs_data
is a crutch to accomodate the main idea r359919 with minimal churn.
Also, M_EXT of type EXT_PGS are just a synonym of M_NOMAP.
The namespace for the newfeature is somewhat inconsistent and
sometimes has a lengthy prefixes. In these patches we will
gradually bring the namespace to "m_epg" prefix for all mbuf
fields and most functions.
Step 1 of 4:
o Anonymize mbuf_ext_pgs_data, embed in m_ext
o Embed mbuf_ext_pgs
o Start documenting all this entanglement
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
This largely reuses the TLS TOE support added in r330884. However,
this uses the KTLS framework in upstream OpenSSL rather than requiring
Chelsio-specific patches to OpenSSL. As with the existing TLS TOE
support, use of RX offload requires setting the tls_rx_ports sysctl.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24453
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
as the dma_device during RDMA registration.
cxgbe's struct device cannot be used as-is because it's a native FreeBSD
driver and ibcore is LinuxKPI based.
MFC after: 1 week
MFC after: r360196
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
KTLS uses the flowid to distribute software encryption tasks among its
pool of worker threads. Without this change, all software KTLS
requests for TOE sockets ended up on the first worker thread.
Note that the flowid for TOE sockets created via connect() is not a
hash of the 4-tuple, but is instead the id of the TOE pcb (tid). The
flowid of TOE sockets created from TOE listen sockets do use the
4-tuple RSS hash as the flowid since the firmware provides the hash in
the message containing the original SYN.
Reviewed by: np (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24348
This fixes a panic when unloading and reloading t4_tom.ko since the
old pointer is still stored when t4_tom_load tries to set it.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24358
This fixes a panic that would occur when the timer tried to close a
stale socket.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communications
While the original implementation of unmapped mbufs was a large
step forward in terms of reducing cache misses by enabling mbufs
to carry more than a single page for sendfile, they are rather
cache unfriendly when accessing the ext_pgs metadata and
data. This is because the ext_pgs part of the mbuf is allocated
separately, and almost guaranteed to be cold in cache.
This change takes advantage of the fact that unmapped mbufs
are never used at the same time as pkthdr mbufs. Given this
fact, we can overlap the ext_pgs metadata with the mbuf
pkthdr, and carry the ext_pgs meta directly in the mbuf itself.
Similarly, we can carry the ext_pgs data (TLS hdr/trailer/array
of pages) directly after the existing m_ext.
In order to be able to carry 5 pages (which is the minimum
required for a 16K TLS record which is not perfectly aligned) on
LP64, I've had to steal ext_arg2. The only user of this in the
xmit path is sendfile, and I've adjusted it to use arg1 when
using unmapped mbufs.
This change is almost entirely mechanical, except that we
change mb_alloc_ext_pgs() to no longer allow allocating
pkthdrs, the change to avoid ext_arg2 as mentioned above,
and the removal of the ext_pgs zone,
This change saves roughly 2% "raw" CPU (~59% -> 57%), or over
3% "scaled" CPU on a Netflix 100% software kTLS workload at
90+ Gb/s on Broadwell Xeons.
In a follow-on commit, I plan to remove some hacks to avoid
access ext_pgs fields of mbufs, since they will now be in
cache.
Many thanks to glebius for helping to make this better in
the Netflix tree.
Reviewed by: hselasky, jhb, rrs, glebius (early version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24213
A T6 adapter contains two crypto engines on separate channels. This
commit distributes sessions between the two engines. Previously, only
the first engine was used.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24347
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
This reduces the lines bouncing around between the driver rx ithread and
the netmap rxsync thread. There is no net change in the size of the
struct (it continues to waste a lot of space).
This kind of split was originally proposed in D17869 by Marc De La
Gueronniere @ Verisign, Inc.
MFC after: 1 week
Sponsored by: Chelsio Communications
it's not in use by TOE or KTLS.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24046
already allocating from the safe zone and the allocation fails.
This bug was introduced in r357481.
MFC after: 3 days
Sponsored by: Chelsio Communications
This more clearly differentiates TLS records encrypted and decrypted
in TOE connections from those encrypted via NIC TLS.
MFC after: 1 week
Sponsored by: Chelsio Communications
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
buffer group.
This fixes a bug where congestion drops on port 1 of a T6 card would
incorrectly be counted as drops on port 0.
MFC after: 1 week
Sponsored by: Chelsio Communications
It duplicated the kern_tls_records stat and was not conditional on NIC
TLS being enabled.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23670
This means that extra virtual interfaces (VIs) created with
hw.cxgbe.num_vis are no longer required to use netmap. Use this
tunable to enable native netmap support on the main interface:
hw.cxgbe.native_netmap="3"
There is no change in default behavior.
Suggested by: jch@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The cong_drop setting will apply to queues created after the setting is
changed and not to existing queues.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
This simplifies the driver's rx fast path as well as the bookkeeping
code that tracks various rx buffer sizes and layouts.
MFC after: 1 week
Sponsored by: Chelsio Communications
ext_arg2 is the only item in the third cacheline in an mbuf and could be
cold by the time rxb_free runs. Put the information needed by rxb_free
in the same line as the refcount, which is very likely to be hot given
that rxb_free runs when the refcount is decremented and reaches 0.
MFC after: 1 week
Sponsored by: Chelsio Communications
requested.
This is a tradeoff between PCIe efficiency during large packet rx and
packing efficiency during small packet rx.
MFC after: 1 week
Sponsored by: Chelsio Communications
than 128MB, which is the maximum supported by the hardware in RDMA mode.
Obtained from: Chelsio Communications
MFC after: 3 days
Sponsored by: Chelsio Communications
