There is some code duplication in error handling paths in a few functions.
Create a function for printing such errors in human-readable way and get rid
of duplicates.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15912
Using DFLTPHYS/MAXPHYS is not always OK, instead make it possible for the
controller driver to provide maximum data size to MMCCAM, and use it there.
The old stack already does this.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15892
I/O operations already in its queue were not being properly drained.
The GEOM framework does the queue draining, but the device driver
needs to wait for the draining to happen. The waiting is done by
adding a g_md_providergone() function to wait for the I/O operations
to finish up.
It is likely that every GEOM provider that implements orphaning
attached GEOM consumers needs to use the "providergone" mechanism
for this same reason, but some of them do not do so. Apparently
Kenneth Merry (ken@) added the drain for just such races, but he
missed adding it to some of the device drivers that needed it.
Submitted by: Chuck Silvers
Reviewed by: imp
Tested by: Chuck Silvers
MFC after: 1 week
Sponsored by: Netflix
Similar to bcm2835_sdhost.c add a TUNABLE and SYSCTL to selectively
turn on debugging printfs if debugging is turned on at compile time.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Reviewed by: gonzo, andrew
Differential Revision: https://reviews.freebsd.org/D19745
frame header and data.
This will fix 'Mysterious OLPC stuff' for received frames and wrong
CCMP / TKIP / data decoding for transmitted frames in net/wireshark
dissector.
While here, drop unneeded comment - net80211 handles padding requirements
for Tx & Rx without driver adjustment.
Tested with D-Link DWA-140 rev B3, STA mode.
MFC after: 1 week
Each control message region must be aligned on a 4-byte boundary on 32-bit
architectures. The 32-bit compat shim for recvmsg() gets the actual layout
right, but doesn't pad the payload length when computing msg_controllen for
the output message header. If a control message contains an unaligned
payload, such as the 1-byte TTL field in the example attached to PR 236737,
this can produce control message payload boundaries that extend beyond
the boundary reported by msg_controllen.
PR: 236737
Reported by: Yuval Pavel Zholkover <paulzhol@gmail.com>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19768
stf(4) interfaces are not multicast-capable so they can't perform DAD.
They also did not set IFF_DRV_RUNNING when an address was assigned, so
the logic in nd6_timer() would periodically flag such an address as
tentative, resulting in interface flapping.
Fix the problem by setting IFF_DRV_RUNNING when an address is assigned,
and do some related cleanup:
- In in6if_do_dad(), remove a redundant check for !UP || !RUNNING.
There is only one caller in the tree, and it only looks at whether
the return value is non-zero.
- Have in6if_do_dad() return false if the interface is not
multicast-capable.
- Set ND6_IFF_NO_DAD when an address is assigned to an stf(4) interface
and the interface goes UP as a result. Note that this is not
sufficient to fix the problem because the new address is marked as
tentative and DAD is started before in6_ifattach() is called.
However, setting no_dad is formally correct.
- Change nd6_timer() to not flag addresses as tentative if no_dad is
set.
This is based on a patch from Viktor Dukhovni.
Reported by: Viktor Dukhovni <ietf-dane@dukhovni.org>
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19751
In particular, elf32 FreeBSD binaries were not executed on LP64 hosts.
The interp_name_len value should account for the nul terminator. This
is needed for strncmp()s in brand checking code to work.
Reported by: andreast
Sponsored by: The FreeBSD Foundation
MFC after: 12 days (together with r345661)
providers mediasize changes.
While here, use GEOM nomenclature to describe providers instead of calling
them device nodes.
Obtained from: Fudo Security
Tested in: AWS
When comparing best frequencies use the absolute value.
If we do not do that we end up choosing an always lower value than
the best one if the exact freq cannot be met.
MFC after: 2 weeks
Drop the adj_free field from vm_map_entry_t. Refine the max_free field
so that p->max_free is the size of the largest gap with one endpoint
in the subtree rooted at p. Change vm_map_findspace so that, first,
the address-based splay is restricted to tree nodes with large-enough
max_free value, to avoid searching for the right starting point in a
subtree where all the gaps are too small. Second, when the address
search leads to a tree search for the first large-enough gap, that gap
is the subject of a splay-search that brings the gap to the top of the
tree, so that an immediate insertion will take constant time.
Break up the splay code into separate components, one for searching
and breaking up the tree and another for reassembling it. Use these
components, and not splay itself, for linking and unlinking. Drop the
after-where parameter to link, as it is computed as a side-effect of
the splay search.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: markj
Tested by: pho
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D17794
The declaration in tcp_var.h is still around so t4_tom continued to
compile but wouldn't load. A separate commit will fix tcp_var.h
Reported By: Dustin Marquess (dmarquess at gmail)
Sponsored by: Chelsio Communications
Summary:
kexec-lite cannot currently handle multiple PT_LOAD segments. In some
cases the compiler generates multiple PT_LOAD segments for an unknown
reason, causing boot to fail from kexec-lite.
Submitted by: Brandon Bergren (older version)
Differential Revision: https://reviews.freebsd.org/D19574
Summary:
With a sufficiently large TOC, it's possible to index out of range, as
the immediate load instructions only permit 16-bit indices, allowing up
to 64kB range (signed) from the base pointer. Allow +/- 2GB range, with
the medium code model TOC accesses in asm.
Patch originally by Brandon Bergren. The issue appears to impact ELFv2
more than ELFv1.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D19708
fuse(4) was heavily instrumented with debug printf statements that could
only be enabled with compile-time flags. They fell into three basic groups:
1. Totally redundant with dtrace FBT probes. These I deleted.
2. Print textual information, usually error messages. These I converted to
SDT probes of the form fuse:fuse:FILE:trace. They work just like the old
printf statements except they can be enabled at runtime with dtrace. They
can be filtered by FILE and/or by priority.
3. More complicated probes that print detailed information. These I
converted into ad-hoc SDT probes.
Also, de-inline fuse_internal_cache_attrs. It's big enough to be a regular
function, and this way it gets a dtrace FBT probe.
This commit is a merge of r345304, r344914, r344703, and r344664 from
projects/fuse2.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19667
From Jake:
iflib_if_transmit returns ENOBUFS when the device is down, or when the
link isn't active.
This was changed in r308792 from return (0), so that the function
correctly reports an error that it was unable to transmit.
However, using ENOBUFS can cause some network applications to produce
the following or similar errors:
"ping: sendto: No buffer space available"
This is a bit confusing as the real cause of the issue is that the
network device is down.
Replace the ENOBUFS return with ENETDOWN to indicate more clearly that
the reason for the failure to send is due to the network device is
offline.
This will cause the error message to be reported as
"ping: sendto: Network is down"
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, sbruno@, bz@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19652
From Jake:
The iflib_device_register function takes the CTX lock before calling
IFDI_ATTACH_PRE, and releases it upon finishing the registration.
Mirror this process in iflib_pseudo_register, so that we always hold the
CTX lock during the attach process when registering a pseudo interface
or a regular interface.
This was caught by code inspection while attempting to analyze where the
CTX lock was held.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19604
CAM IOCTL interfaces traditionally mapped user-space data buffers to KVA.
It was nice originally, but now it takes too much to handle respective
TLB shootdowns, while small kernel memory allocations up to 64KB backed
by UMA and accompanied by copyin()/copyout() can be much cheaper.
For large buffers mapping still may have sense, and unmapped I/O would
be even better, but the last unfortunately is more tricky, since unmapped
I/O API is too specific to struct bio now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
lagg_bcast_start appeared to have a bug in that was using the last
lagg port structure after exiting the epoch that was keeping that
structure alive. However, upon further inspection, the epoch was
already entered by the caller (lagg_transmit), so the epoch enter/exit
in lagg_bcast_start was actually unnecessary.
This commit generally removes uses of the net epoch via LAGG_RLOCK to
protect the list of ports when the list of ports was already protected
by an existing LAGG_RLOCK in a caller, or the LAGG_XLOCK.
It also adds a missing epoch enter/exit in lagg_snd_tag_alloc while
accessing the lagg port structures. An ifp is still accessed via an
unsafe reference after the epoch is exited, but that is true in the
current code and will be fixed in a future change.
Reviewed by: gallatin
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19718
Consider a bridge0 with em0 and em1 members. Traffic rx'd by em0 and
transmitted by bridge0 through em1 gets accounted for in IPACKETS/IBYTES
and bridge0 bpf -- assuming it's not unicast traffic destined for em1.
Unicast traffic destined for em1 traffic is not accounted for by any
mechanism, and isn't pushed through bridge0's bpf machinery as any other
packets that pass over the bridge do.
Fix this and simplify GRAB_OUR_PACKETS by bailing out early if it was rx'd
by the interface that it was addressed for. Everything else there is
relevant for any traffic that came in from one member that's being directed
at another member of the bridge.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19614
r345620 by kib@ fixed the rtld issue that caused a crash at startup
during resolution of libc's ifuncs with BIND_NOW.
PR: 233333
Sponsored by: The FreeBSD Foundation
It looks like some DIMMs claim to have a TSOD, but actually don't. Some
claim they weren't able to change the SPD page, but they did. Neither of
those should be fatal errors.
PR: 235944
Submitted by: Greg V <greg@unrelenting.technology>
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: cem
MFC after: 1 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D19681
We were doing so as a workaround for the problem addressed by r345593, so
it's no longer necessary.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
RISC-V timer has no dedicated DTS node and we have to get timer
frequency from cpus node.
Tested on Government Furnished Equipment (GFE) cores synthesized
on Xilinx VCU118.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19727
Remove redundant npxsave_core definition while here.
Suggested by: Anton Rang
Reviewed by: kib, Anton Rang <rang AT acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19665
In most cases kernel.bootfile is populated from the information
provided by loader(8). There are certain scenarios when loader
is not available, for instance when kernel is loaded by u-boot
or some other BootROM directly. In this case the default value
"/kernel" points to invalid location and breaks some functinality,
like using installkernel on self-hosted system or dtrace's CTF
lookup. This can be fixed by setting the value manually but the
default that reflects correct location is better than default that
points to invalid one.
Current default was set around FreeBSD 1, when "/kernel" was the
actual path. Transition to /boot/kernel/kernel happened circa FreeBSD 3.
PR: 221550
Reviewed by: ian, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18902
