Trim all word separators from end of line, except for last line and
only use '\r' to terminate the pasted lines as expected by TTY.
Submitted by: Ivan Quitschal <tezeka@hotmail.com>
Differential Revision: https://reviews.freebsd.org/D35552
PR: 263084
Sponsored by: NVIDIA Networking
(cherry picked from commit 5fe0a82501)
This is slightly more optimized than checking panicstr directly. For
most of these instances performance doesn't matter, but let's make
KERNEL_PANICKED() the common idiom.
Reviewed by: mjg
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35373
(cherry picked from commit 35eb9b10c2)
It simplifies the declaration of the driver structures a little. There
are no current consumers of this macro, in fact it looks like it was
added for exactly this purpose.
This decreases the scope of some variables, so rework the initialization
in vt_init_logos() such that it doesn't require them.
No functional change intended.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34820
(cherry picked from commit ff1c8af8c3)
There's too many broken hardware out there that wrongly has the
ACPI_FADT_NO_VGA bit set. Ignore it unless running as a virtualized
guest, as then the expectation would be that the hypervisor does
provide correct ACPI tables.
Reviewed by: emaste, 0mp, eugen
Sponsored by: Citrix Systems R&D
PR: 230172
(cherry picked from commit 0518832011)
VGA hardware provides many different graphics and data access modes,
each with different capabilities and limitations.
VGA vt(4) graphics mode operates on blocks of pixels at a time. When a
given pixel block contains only two colours the vt_vga driver uses write
mode 3. When the block contains more than two colours it uses write
mode 0. This is done because two-colour write mode 3 is much more
efficient.
In practice write mode 3 is used most of the time, as there is often a
single foreground colour and single background colour across the entire
console. One common exception requiring the use of mode 0 is when the
mouse cursor is drawn over a background other than black, as we need
black and white for the cursor in addition to the background colour.
VGA's default 16-colour palette provides the same set of colours as the
system console, but in a different order. Previously we configured a
non-default VGA palette that had the same colours at the same indexes.
However, this caused anything drawn before the kernel started (drawn by
the loader, for instance) to change colours once the kernel configured
the new, non-default palette.
In 5e251aec86 we switched to leaving the default VGA palette in place,
translating console colour indexes to VGA colour indexes as necessary.
This translation was missed for the write mode 0 case for pixel blocks
with more than two colours.
PR: 261751
Reviewed by: adrian
MFC after: 1 week
Fixes: 5e251aec86 ("vt(4): Use default VGA palette")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34412
(cherry picked from commit f266082f11)
I suspect the variable names and comments were accidentally French.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 731a929ac9)
Previously when double-clicking on the first word on a line we would
select from the cursor position to the end of the word, not from the
beginning of the line. Similarly, when double-clicking on the last word
on a line we would select from the beginning of the word to the cursor
position rather than the end of the line.
This is because we searched backward or forward for a space character to
mark the beginning or end of a word. Now, use the beginning or end of
the line if we do not find a space.
PR: 261553
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 692bb3f029)
(cherry picked from commit 521dbfd6b1)
In the (extremely unlikely) case of vd->vd_height ==
vt_logo_sprite_height the vd_drawrect code would write outside of
frame-buffer memory.
MFC after: 1 week
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D34220
(cherry picked from commit 06296f77c5)
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 9feff969a0)
vt_fini_logos() calls vtbuf_grow(), which reallocates the console
window's buffer using malloc(M_WAITOK). Because vt_fini_logos() is
called via a callout, we end up panicking if INVARIANTS is enabled.
Fix the problem simply by clearing the logos using a timed taskqueue.
taskqueue_thread is formally allowed to sleep; of course, if we actually
end up sleeping to satisfy the allocation, then we have bigger problems.
PR: 260896
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 6c7e4d72b1)
This removes the pmap entry when switching away to e.g. drm fb.
Differential Revision: https://reviews.freebsd.org/D29020
MFC After: 1 month
(cherry picked from commit 8ebda6e44b)
Currently the type isn't set in the fbtype struct so any userland
program that call the FBIOGTYPE ioctl will think it's a FBTYPE_SUN1BW
which is far from the truth.
No app that I found find checks the type but at least now it's correct.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33221
(cherry picked from commit ca23e9d2ac)
On recent OpenBMC firmware, the onboard ASMEDIA video card framebuffer
address was removed from device tree for security purposes (value is set
to zero to avoid leaking the address).
This patch works around the problem by taking framebuffer base address
from the "ranges" property of a parent node.
Reviewed by: luporl, jhibbits (on IRC)
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30626
(cherry picked from commit b042d10cdc)
I made a mistaking in merging the final commits for the devctl changes. This
adds the 'hushed' variable and has the correct dates for the manuals.
Pointy hat to: imp
(cherry picked from commit 80f21bb039)
Generate VT events when the bell beeps. When coupled with disabling the
bell,this allows custom bells to be rung when we'd otherwise beep.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D32656
(cherry picked from commit 4ac3d08a96)
Add the glue needed to listen to TP_SETBELLPD which teken uses to
inform its client drivers about the results of parsing
\e[=<pitch>;<duration>B. It converts these to a Hz value for the
tone/pitch of the bell and a duration in ms. There's some loss of
precision because <pitch> in the escape seuquence is defined to be
(1193182 / pitch) Hz and <duration> is in 10ms units. Also note that
kbdcontrol also parses 'off' but then doesn't send the proper escape
sequence, leading me to wonder if that's another bug since teken
appears to parse that sequence properly and I've added code here to
treat that as the same as quiet or disabled.
In general, Hz from 100 to 2000 is good. Outside that range is possible,
but even at 100Hz the square wave is starting to sound bad and above
2000Hz the speaker may not respond.
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D32620
(cherry picked from commit 2533eca1c2)
Change the 'period' argument to 'duration' and change its type to
sbintime_t so we can more easily express different durations.
Reviewed by: tsoome, glebius
Differential Revision: https://reviews.freebsd.org/D32619
(cherry picked from commit 072d5b98c4)
In vt_kms, the postswitch callback restores fbdev mode when
panicking or entering the debugger. This ensures that even when
a graphical applicatino was running on the first tty, simple framebuffer
mode would be restored and the panic would be visible instead
of the frozen GUI. But vt wouldn't call the postswitch callback
when we're already on the first tty, so running a GUI on it
would prevent you from reading any panics.
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D29961
(cherry picked from commit c937a405bd)
The code explicitly takes Giant when it accesses keyboard, and I see
no reason to take it globally by callout(9).
MFC after: 1 month
(cherry picked from commit da69c67526)
Some framebuffer properties obtained from the device tree were not being
properly converted to host endian.
Replace OF_getprop calls by OF_getencprop where needed to fix this.
This fixes boot on PowerPC64 LE, when using ofwfb as the system console.
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27475
(cherry picked from commit 043577b721)
- Implements little-endian support (powerpc64le)
- Adds 'hw.ofwfb.physaddr' kernel parameter so user can manually
provide correct address if it's not detected correctly
- Adds 'hw.ofwfb.argb32_pixel' so user can set it manually if
colors are inverted due to incorrect pixel format (default = 1)
- Automatically selects RGBA32 pixel format if NVidia graphic adapter
is detected (sets hw.ofwfb.argb32_pixel=0)
Machines equipped with NVidia graphic adapters tend to use RGBA32
pixel format. By default ARGB32 pixel format is used, proved to work
on machines equipped with ATI graphic adapter and the onboard adapter
used on Talos II and Blackbird machines from Raptor Computing Systems.
Original patch developed by bdragon
Reviewed by: bdragon, luporl
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28604
(cherry picked from commit 50b7c1f530)
vt is using static buffers for on screen data, the buffer size is
calculated based on maximum supported screen size and 8x16 font.
When using hi-res graphics and very smaller than 8x16 font, we
need to be careful not to overflow static buffers in vt.
Testing: I did test by building smaller buffers than vt currently is using,
royger was testing on actual 4k capable hardware.
MFC after: 1 week
Tested by: royger
(cherry-picked from 32bf05ad89)
Set refcount for loader provided font to 1 to prevent this font
from being released (so we can reset to default).
As we get started with no memory allocator, we set up static font data
for font passed by loader (if there is any). At this time, we also must
set refcount 1, and refcount will get incremented in cnprobe() callback.
At some point the memory allocator will be available, and we will set up
properly allocated font data, but we should not disturb the refcount.
PR: 252833
PR: 253147
(cherry picked and squashed 93ebd6307e and
1912d2b15e)
When a break-to-debugger is triggered, kdb will grab the console and vt(4)
will generally switch back to ttyv0. If one issues a continue from the
debugger, then kdb will ungrab the console and the system rolls on.
This change adds a perhaps minor feature: when we're down to grab == 0 and
if vt actually switched away to ttyv0, switch back to the tty it was
previously on before the console was grabbed.
The justification behind this is that a typical flow is to work in
!ttyv0 to avoid console spam while occasionally dropping to ddb to inspect
system state before returning. This could easily enough be tossed behind
a sysctl or something if it's not generally appreciated, but I anticipate
indifference.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D27110
vt_allocate_keyboard only needs to unwind the effects of keyboard-grabbing,
rather than any associated vt window action that may have also happened.
Split out the bits that do the keyboard work into *_noswitch equivalents,
and use those in keyboard allocation. This will be less error-prone when a
later change will offer up different window state behavior when the console
is ungrabbed.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D27110
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
When using the ALT+CTRL+ESC sequence to break into kdb, the keyboard is
completely borked when you return. watch(8) shows that it's working, but
it's inserting escape sequences.
Further investigation revealed that VT_ALT_TO_ESC_HACK is the default and
directly conflicts with this sequence, so upon return from the debugger
ALKED is set.
If they triggered the break to debugger, it's safe to assume they didn't
mean to use VT_ALT_TO_ESC_HACK, so just unset it to reduce the surprise when
the keyboard seems non-functional upon return.
Reviewed by: tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27109
vt_generate_cons_palette() does take max values of RGB component colours, not
mask. Also we need to set info->fb_cmsize, or vt_fb_init() will re-initialize
the info->fb_cmap.
vm_ooffset_t is now unsigned. Remove some tests for negative values,
or make other adjustments accordingly.
Reported by: Coverity
Reviewed by: kib markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26214
Currently the CONS_HISTORY and CONS_CLRHIST ioctls modify the state of the
active terminal instead of the terminal against which the ioctl was issued.
Because of the way vidcontrol(1) works, these are the same in most cases.
But a poorly-timed window switch can make them differ. This is reproducible
by issuing e.g. 'vidcontrol -s 2 && vidcontrol -C' to switch from vty 1 to
vty 2; teken will reset the cursor position on vty 1 but vt(4) will clear
the history buffer of vty 2, producing an interesting state of affairs.
Differential Revision: https://reviews.freebsd.org/D25564
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
r361601 implemented basic support for cleaing the console history buffer.
But after clearing the history buffer, it's not especially useful to be
able to scroll back through that buffer, or for the cursor position to
remain at (very likely) the bottom of the screen.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25079
Extract scrollback buffer initialization into a common routine, used both
during vt(4) init and in handling the CONS_CLRHIST ioctl.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D24815
The reporter is developing a frame buffer driver for hardware using
3 bytes per pixel, but a stride that's a multiple of 256. Previously
this resulted in writing beyond the end of each stride. On the last
row this attempted to write past the end of the frame buffer, triggering
the assertion in vt_fb_mem_wr1().
PR: 243533
MFC after: 2 weeks
Submitted by: Thomas Skibo
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
This effectively reverts r355935, but is functionally equivalent. We gain no
benefit from storing the index and repeatedly fetching the keyboard with
`kbd_get_keyboard` when we need it. We'll be notified when it's going away
so we can clean up the pointer.
All existing references were trivially converted. Only once instance
actually needed the index.
With absolutely no keyboards attached and no kbdmux in kernel, we descend
down this error path. 0 is a valid keyboard index, so leaving
vd->vd_keyboard at 0 when there's no keyboard found is objectively wrong as
later attachment of a keyboard will fail -- it gets index 0, and vt thinks
it's already using that keyboard.
This is decidedly the corniest of corner cases, but it's easy enough to get
correct that we should do so.
Tested in a kernel without atkbdc, atkbd, psm, kbdmux, ukbd, hyperv then
loading ukbd post-boot and attaching a usb keyboard.
This change enables the use of OpenFirmware Console (ofwcons), even when VGA is
available, allowing early kernel messages to be seen, that is important in case
of crashes before VGA console initialization.
This is specially useful in virtualized environments, where the user/developer
doesn't have full control of the virtualization engine (e.g. OpenStack).
The old behavior is preserved by default and, in order to use ofwcons, a few
tunables that have been introduced need to be set:
- hw.ofwfb.disable=1 - disable OFW FrameBuffer device
- machdep.ofw.mtx_spin=1 - change PPC OFW mutex to SPIN type, to match kernel
console's mutex type
- debug.quiesce_ofw=0 - don't call OFW quiesce, needed to keep ofwcons I/O
working
More details can be found at differential revision D20640.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20640
r259680 added support to vt(4) for printing double-width characters.
Remove the comment that claims no support.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The TUNABLE_INT_FETCH is macro around getenv_int() and we will get
return value 0 or 1 for failure or success, we can use it to decide
which background color to use.
